Post questions, comments, reviews or page errors in the comment box below.

Click here to download ACER K135P (01) PDF MANUAL


PDF Content Summary:

****** Page 1 ****** Acer Projector K 135/1<135P/K135S/K135i/L221/ LK-WI 2/1<1 32/1<132P/L221 F/ LK-WI 2L Series User's Guide ****** Page 2 ****** Copyright 0 2013. Acer Incorporated. All Rights Reserved. Acer Projector KI 35/1< ILK-W 132/1< 132P/L22 K-W 12L Series User's Guide Original Issue: 02/2013 Changes may be made periodically to the information in this publication without obligation to notify any person of such revisions or changes. Such changes will be incorporated in new editions of th is manual or supplementary documents and publications. Th is company makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims the implied warranties of merchantability or fitness for a particu lar purpose. Record the model number, serial number, purchase date and place of purchase information in the space provided below. The serial number and model number are recorded on the label affixed to your projector. All correspondence concern ing your unit should include the serial number, model number and purchase information. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electron ically, mechanically, by photocopy, recording or otherwise, without the prior written permission of Acer Incorporated. Acer Projector K 135/1<135P/K135S/K135i/L22 K-W IF/LK-W12L Senes Model number: Serial number: Date of purchase. Place of purchase. Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies' product names or trademarks are used herein for identification purposes only and belong to their respective companies. HDMITM, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. I" ****** Page 3 ****** iii Information for your safety and comfort Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. Turning the product off before cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. Caution for plug as disconnecting device Observe the following guidelines when connecting and disconnecting power to the external power supply unit: Install the power supply unit before connecting the power cord to the AC power outlet. Unplug the power cord before removing the power supply unit from the projector. If the system has multiple sources of power, disconnect power from the system by unplugging all power cords from the power supplies. Caution for Accessibility Be sure that the power outlet you plug the power cord into is easily accessible and located as close to the equipment operator as possible. When you need to disconnect power to the equipment, be sure to unplug the power cord from the electrical outlet. Warnings! Do not use this product near water. Do not place this product on an unstable cart, stand or table. If the product falls, it could be seriously damaged. Slots and openings are provided for ventilation to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should never be placed near or over a radiator or heat register, or in a built-in installation unless proper ventilation is provided. Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind onto or into the product. ****** Page 4 ****** To avoid damage of internal components and to prevent battery leakage, do not place the product on a vibrating surface. Never use it under sporting, exercising, or any vibrating environment which will probably cause unexpected short current or damage rotor devices. Using electrical power This product should be operated from the type of power indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company. Do not allow anything to rest on the power cord. Do not locate this product where people will walk on the cord. If an extension cord is used with this product, make sure that the total ampere rating of the equipment plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure that the total rating of all products plugged into the wall outlet does not exceed the fuse rating. Do not overload a power outlet, strip or receptacle by plugging in too many devices. The overall system load must not exceed 80% of the branch circuit rating. If power strips are used, the load should not exceed 80% of the power strip's input rating This product's AC adapter is equipped with a three-wire grounded plug The plug only fits in a grounded power outlet. Make sure the power outlet is properly grounded before inserting the AC adapter plug. Do not insert the plug into a non-grounded power outlet. Contact your electrician for details. Warning! The grounding pin is a safety feature. Using a power outlet that is not properly grounded may result in electric shock and/or injury. Note: The grounding pin also provides good protection from unexpected noise produced by other nearby electrical devices that may interfere with the performance of this product. Use the product only with the supplied power supply cord set. If you need to replace the power cord set, make sure that the new power cord meets the following requirements: detachable type, UL listed/CSA certified, VDE approved or its equivalent, 4.5 meters (15 feet) maximum length. ****** Page 5 ****** Product servicing Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel. Unplug this product from the wall outlet and refer servicing to qualified service personnel when: the power cord or plug is damaged, cut or frayed liquid was spilled into the product the product was exposed to rain or water the product has been dropped or the case has been damaged the product exhibits a distinct change in performance, indicating a need for service the product does not operate normally after following the operating instructions Note: Adjust only those controls that are covered by the operating instructions, since improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal condition. Warning! For safety reasons, do not use non-compliant parts when adding or changing components. Consult your reseller for purchase options. Your device and its enhancements may contain small parts. Keep them out of the reach of small children. Additional safety information Do not look into the projector's lens when the light is on. The bright may hurt your eyes. Turn on the projector first and then signal sources Do not place the product in following environments: Space that is poorly ventilated or confined. At least 50cm clearance from walls and free flow of air around the projector is necessary. Locations where temperatures may become excessively high, such as inside of a car with all windows rolled up Locations where excessive humidity, dust, or cigarette smoke may contam inate optical components, shortening the life span and darken ing the image. Locations near fire alarms. Locations with an ambient temperature above 40 oc/104 OF. Locations where the altitudes are higher than 10000 feet Unplug immediately if there is something wrong with your projector. Do not operate if smoke, strange noise or odor comes out of your projector. It ****** Page 6 ****** VI might cause fire or electric shock. In this case, unplug immediately and contact your dealer. Do not keep using this product to break or drop it. In this case contact your dealer for inspection. Do not face the projector lens to the sun. It can lead to fire. When switching the projector off, suggest to ensure the projector completes its cooling cycle before disconnecting power. Do not frequently turn off the main power abruptly or unplug the projector during operation. The best way is to wait for the fan to turn off before turning main power off Do not touch air outlet grille and bottom plate which becomes hot. Clean the air filter frequently if have. The temperature inside may rise and cause damage when the filter/ventilation slots clogged with dirt or dust. Do not look into the air outlet grille when projector is operating. It may hurt your eyes. Always open the lens shutter or remove the lens cap when the projector is on. Do not block the projector lens with any object when the projector is under operation as this could cause the object to become heated and deformed or even cause a fire. Do not attempt to disassemble this projector. There are dangerous high voltages inside which may hurt you. Refer servicing only to suitable qualified professional service personnel Do not stand the projector on end vertically. It may cause the projector to fall over, causing injury or damage. Caution for Listening To protect your hearing, follow these instructions. Increase the volume gradually until you can hear clearly and comfortably. Do not increase the volume level after your ears have adjusted. Do not listen to music at high volumes for extended periods. Do not increase the volume to block out noisy surroundings. Decrease the volume if you can 't hear people speaking near you. ****** Page 7 ****** vii Disposal instructions Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle. For more information on the Waste from Electrical and Electronics Equipment (WEEE) regulations, visit acer-group.com/public/Sustainability/sustainability01.htm ****** Page 8 ****** VIII First things first Usage Notes Do: Turn off the product before cleaning. Use a soft cloth moistened with mild detergent to clean the display housing. Disconnect the power plug from AC outlet if the product is not being used for a long period of time. Don't: Block the slots and openings on the unit provided for ventilation. Use abrasive cleaners, waxes or solvents to clean the unit. Use under the following conditions: In extremely hot, cold or humid environments. In areas susceptible to excessive dust and dirt. Near any appliance that generates a strong magnetic field. Place In direct sunlight. Precautions Follow all warnings, precautions and maintenance as recommended in this user's guide to maximize the life of your unit. Warning: Do not look into the projector's lens when the light is on. The bright may hurt your eyes. To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. Please do not open or disassemble the product as this may cause electric shock. When switching the projector off, please ensure the projector completes its cooling cycle before disconnecting power. Turn on the projector first and then the signal sources. Do not use lens cap when projector is in operation. ****** Page 9 ****** Information for your safety and comfort First things first Usage Notes Precautions Introduction Product Features Package Overview Projector Overview Projector Outlook Control Panel Remote Control Layout MHL (Mobile High-Definition Link) Control Getting Started Connecting the Projector Turning the Projector On/Off Turning on the Projector Turning the projector off Adjusting the Projected Image Adjusting the Height of Projected Image How to optimize image size and distance User Controls Installation menu Onscreen Display (OSD) Menus Color lma ge Setting Management Audio 3D Language Appendices Troubleshooting iii viii VIII VIII 1 2 4 4 5 6 8 10 10 11 11 12 13 13 14 16 16 17 18 20 22 22 23 23 24 25 25 ****** Page 10 ****** LED & Alarm Definition Listing Specifications Compatibility modes Regulations and safety notices 29 30 32 36 ****** Page 11 ****** 1 Introduction Product Features This product is a single-chip DLP@ projector. Outstanding features include: DLP@ technology 1280 x 800 WXGA resolution 4:3/16:9/Full/L.Box aspect ratio supported. Versatile display modes (Bright, Standard, Movie, Picture, Game, User) enable optimum performance in any situation. Compact size projector facilitates business purposes and home entertainment. Acer EcoProjeciton Technology delivers Intelligent power management approach and physical efficiency improvement. Equipped with HDMITM connection supporting HDCP. Advanced digital keystone correction delivers optimum presentations. Multi-language on screen display (OSD) menus. I-ox digital zoom and pan move function. Environmental light source and longer life by LED solution. Enjoy media playback via USB, RAM and Micro SD card reader. Microsoft@ Windows@ 2000, XP, Vista@, Windows@ 7, Windows Macintosh@ OS compliant. Support MHL VI .2 signal display. Built-in two 3 Watts speaker with SRS 3D audio feature. ****** Page 12 ****** 2 Package Overview This projector comes with all the items shown below. Check to make sure your unit is complete. Contact your dealer immediately if any thing is missing Projector eee ooe Remote control (for K 132/K132P/L221F/ LKW12L series on ly) Praj Qu ick start guide HDMI cable (option) Power cord Battery Carrying case Un iversal to Audio out adapter (option) AC to DC power adapter User's gu ide MHL cable (option) Universal to D-sub cable (option) ****** Page 13 ****** 3 Below items are for K135/K135P/K135S/K135i/L221/LK-W12 only: CD User's guide (for multi-media and wireless functions) USB WiFi adapter (option) Projector Quick start guide (for multi-media and wire less functions) öee ooo Remote control ****** Page 14 ****** 4 Projector Overview Projector Outlook Front / upper side 4 5 6 3 1 2 3 2 Description Projection lens Tilt adjusting wheel Focus ring 1 4 5 6 Description Power button Control panel Remote control receiver Rear side KI 35/K135P/K135S/K135i/L221/LK-W12 micro OSB UNIVER5ÅL VO 3 1 2 4 7 KI 32/K132P/L221F/LKW12L SERVICE UNIVERSAL l.,o 5 6 Description Remote control receiver 1 2 5 Universal connector for VGA in/ Audio 6 out connector Description DC Input USB connector ****** Page 15 ****** 3 4 Description MicroSD Card Slot HDMI/ MHL connector Control Panel 7 SOURCE MENU 5 Description Mini USB connector 3 6 2 1 2 3 4 5 6 con d.) 4 5 Function POWER MENU SOURCE LAMP TEMP Description Power button and Power Indicator LED. See the contents in i' Turning the Projector On/Off" section. Press i' MENU" to launch the Onscreen display (OSD) menu, back to the previous step for the OSD menu operation or exit the OSD menu. Changes the active source. Lamp Indicator LED Temp Indicator LED Four directional select Use the keys to select items or make keys adjustments to your selection. ****** Page 16 ****** 6 Remote Control Layout _____ II 2 3 5 8 10- 12 15 14 con öe€T see II 1 4 6 7 9 13 16 17 18 20 21 öee eee II @ II (J bÆNU 9 O MENU €9 7 19 22 ooell — 23 KI 32/K132P/L221F/LK-W12L escrip Ion 2 3 4 5 6 7 8 9 10 12 13 14 15 L221/LK-W12 un Ion Infrared transmitter Zoom Power Aspect ratio Mo e Source Media home Me la setup Menu Four directional 0000 select keys Bac [Stop Enter/ Play/ Pause Information Previous Sends signals to the projector. Zooms the projector display in or out. Re er tot e "Turning t e Projector On/O " section. Momentari y turnso t e VI eo. Press "HIDE" to I et e image, press again to display the image. C ooset e eslre aspect ratio Auto, Fu ,4:3, 16:9, L.Box Press "MODE" to se ectt e Isp ay mo e rom Brig t, Standard, Movie, Picture, Game and User. Changes the active source. Press to return to the Home page of Media mode. Press to enter me la OSD setting. Press "MENU" to aun t e Onscreen Isp ay OSD menu, back to the previous step for the OSD menu operation or exit the OSD menu. Use up, down, left, right buttons to select Items or make adjustments to your selection. Press "Bac top" to stop p ayng me la I e or go ac to upper data folder. Press " Enter/ P ay/ Pause" to enter/ play/ pause media file. To display the projector information. Press to previous the media file. ****** Page 17 ****** con 16 17 18 19 20 21 22 23 un Next Freeze Bac Enter Ion 7 tion Vo ume up Volume down MusiC Mute escri Press to the next media file. To pause t e screen mage. No unction. No function. Increasest e vo ume. Decreases the volume. No function. To turn on/o NO : M1820 t evo ume. Model NO : Mi819 NOTICE Rating: DC 6CmA MAX BONTECH ELECTRONICS COJTO CHI'U. MC.JGNII.OOI NOTICE Rating: DC — 60mAUAX ÜONTECH ELECTRONICS CO. ,LTO. ****** Page 18 ****** 8 MHL (Mobile High-Definition Link) Control KI 35/1<135P/K135S/K135i/L221/LK-W12 öee 1 3 4 6 8 01 Mo Navigation 01 HOME II SETUP MENU 5 7 1—–¯—9 • Press " MODE" utton Control Mode. WHL escriptl n or one secon to activate t e MHL 2 3 4 5 6 7 8 9 con e A omponen MODE SOURCE MENU Direction Keys Vo ume Up/ Volume Down Exit Stop Select/Enter Play/Pause Backward Forwar • To exit, press the "MODE" button again. Press the " SOURCE" button to toggle between Navigation or Multi-Media mode. Press to aunc t e root memu (on ly for Navigation mode) Use up, down, left, right buttons to select items or make adjustments to your selection. (on ly for Navigation mode) Increases/Decreasest e vo ume. (on ly for Multi-Media mode) To exit the file. (only for Navigation mode) To stop the file. (only for Mu ti-Me ia mode) To select the file. (on ly for Navigation mode) Toggles between playback and pause. (on ly for Multi-Media mode) Scans backward during the file playback. (on ly for Multi-Media mode) Scans orwar t roug t e I ep ay ac (on ly for Multi-Media mode) ****** Page 19 ****** 9 K132/K132P/L221F/LK-W12L 1 3 5 7 8 con om MODE RATIO onen MODE MENU SORE ENTE 2-4 4 6 Control Mode Navigation escri Ion 2 3 4 5 6 7 8 9 SOURCE Exit Se ect/Enter Direction Keys MENU Volume Up Vo ume Down • Press "MODE" button for one second to activate the MHL Control Mode. • To exit, press the "MODE" button again. Press t e "SOURCE" utton to togg e Navigation mo e. To exit the file. Press to se ect/entert e I e. Use up, own, e rig t uttons to se ect Items or ma e adjustments to your selection. Press to launch the root memu Press to increase the volume. Press to ecreasest evo ume. ****** Page 20 ****** 10 Getting Started Connecting the Projector m icro UNIVERSAL 1/0 8 7 escrip Ion 1 AC to DC power adapter 2 Power cord USB disk/stick 3 USB WiFi adapter 4 Micro SD card 5 HDMI cable 6 HDMI 5 HDMI DVD player 3 1 2 escnptlon 6 7 8 9 Un iversal to D-sub cable Universal to Audio out adapter Audio cable Jack/RCA USB cable Note: To ensure the projector works well with your comp uter, please make sure the timing of the display mode is compatible with the projector. Note: USB cable needs powered extender if the length is over 5 m. ****** Page 21 ****** 11 Turning the Projector On/Off Turning on the Projector 1 2 3 Ensure that the power cord and signal cable are securely connected. The Power indicator LED will flash red. Turn on the projector by pressing "Power" button on the control panel, and the Power indicator LED will turn blue.(lllustration #1) Turn on your source (computer, notebook, video player ,etc.). The projector will detect your source automatically. If the screen displays i' No Signal", please make sure the signal cables are securely connected. If you connect to multiple sources at the same time, use the "Source" button on either control panel or the remote control or direct source key on the remote control to switch between inputs. Power button ****** Page 22 ****** 12 Turning the projector off 1 2 3 To turn the projector off, press the power button. This message appears: " Please press the power button again to complete the shutdown process. " Press the power button again. The LED power indicator will stop blinking and turn solid red to indicate standby mode after the projector is turned off It is now safe to unplug the power cord. Warning indicators: "Projector Overheated. Will automatically turn off soon. " This onscreen message indicates that the projector has overheated. The projector will automatically shut down. Contact your local dealer or service center. "Fan failed. Will automatically turn off soon. " This onscreen message indicates that the fan has failed. The projector will automatically shut down. Contact your local dealer or service center. Note: Whenever the projector automatically shuts down, contact your local reseller or service center. ****** Page 23 ****** 13 Adjusting the Projected Image Adjusting the Height of Projected Image The projector is equipped with tilt adjusting wheel for adjusting the height of image. To raise/lower the image: 1 Use Tilt adjusting wheel to fine-tune the display angle. Tilt adjusting wheel ****** Page 24 ****** 14 How to optimize image size and distance Consult the table below to find the optimal image sizes achievable when the projector is positioned at a desired distance from the screen. Example: If the projector is 1.34 m from the screen, good image quality is possible for image sizes 41.5". Note: Remind as below figure, the space of 56 cm height is required when located at 1.34 m distance. screen size 1.3416 Desired Distance 41.5" Height: 56cm ****** Page 25 ****** 15 Desired Distance (m) 0.97 1 07 1 34 161 2.14 2.58 Screen size (Min zoom) Diagonal (inch) 30.0 33.2 41.5 49.7 66.3 80.0 W (cm) x H (cm) 64 x 40 71 x 45 89 x 56 107 x 67 143 x 89 172 x 108 Top From base to top of image (cm) 40 45 56 67 89 108 Zoom Ratio: 1.0x

****** Page 26 ****** 16 User Controls Installation menu The installation menu provides an onscreen display (OSD) for projector installation and maintenance. Use the OSD only when the message “No signal input” is displayed on the screen. The menu options include settings and adjustments for screen size and distance, focus, keystone correction and more . 1 2 3 4 5 Turn on the projector by pressing ” Power” button on the control pad. Press the ” MENU” button on the control pad to launch the OSD for projector installation and maintenance. Installation Ptojetfiön Mode PTOjet’iOn A’Jtn Manual Keystone Language Select English Adjust The background pattern acts as a guide to adjusting the calibration and alignment settings, such as screen size and distance, focus and more . The Installation menu includes the following options: •Projection Mode •Projection Location •Auto Keystone settings •Manual Keystone settings •Language settings •Reset to factory default function Use the up and down arrow keys to select an option, the left and right arrow keys to adjust selected option settings, and the right arrow key to enter a submenu for feature setting. The new settings will be saved automatically upon exiting the menu. Push the menu button anytime to exit the menu and return to the Acer welcome screen.

****** Page 27 ****** 17 Onscreen Display (OSD) Menus The projector has multilingual OSD that allow you to make image adjustments and change a variety of settings. Using the OSD menus To open the OSD menu, press “MENU” on the remote control. When the OSD is displayed, use the A v keys to select any item in the main menu. After selecting the desired main menu item, press to enter submenu for feature setting. Use the A v keys to select the desired item and adjust the settings by using the keys. Select the next item to be adjusted in the submenu and adjust as described above. Press ” MENU” on the remote control, the screen will return to the main menu. To exit OSD, press “MENU” on the remote control again. The OSD menu will close and the projector will automatically save the new settings. Main menu 4)) Color Display Mode Well Color Brightness Contrast Saturation Tint Aö•anced A V’ Select Sub menu U Standard so Setting O Adjust Press Main Menu

****** Page 28 ****** 18 Color Display Mode Wall color Brightness Contrast Saturation Tint Color There are many factory presets optimized for various types of mages. Bright: For brightness optimization. Standard: For common environment. Movie: For brighter and general moviemideo/photo playing. Picture: For graphic picture. Game: For game content. User: Memorize user’s settings. Use this function to choose a proper color according to the wall. There are several choices, including wh ite, light yellow, light blue, pink, dark green. It will compensate the color deviation due to the wall color to show the correct image tone. Adjust the brightness of the image. Press to darken image. Press to lighten the image. “Contrast” controls the difference between the lightest and darkest parts of the picture. Adjusting the contrast changes the amount of black and white in the image. Press < to decrease the contrast. Press to increase the contrast. Adjusts a video image from black and white to fu Ily saturated color. Press < to decrease the amount of color in the image. Press to increase the amount of color in the image. Adjusts the color balance of red and green. Press to increase the amount of green in the image. Press to increase the amount of red in the image. ****** Page 29 ****** Advanced 19 Color Temperature Adjust the color temperature. At higher color temperatures, the screen looks colder; at lower color temperatures, the screen looks warmer. Degamma Effects the representation of dark scenery. With greater gamma value, dark scenery will look brighter. Dynamic Black Choose "On" to automatically optimize the display of dark movie scenes enabling them to be shown in incredible detail. Note: "Saturation " and "Tint" functions are not supported under computer mode or HDMI mode. ****** Page 30 ****** 20 Image Projection Mode Projection Location Aspect Ratio 16:9 Auto Keystone Manual Keystone Sharpness Image a Mv:ti•• Front: The factory defau It setting. Rear: Reverses the image so you can project from beh ind a translucent screen. Auto: Automatically adjusts projection location of image. Desktop Ceiling: Turns the image upside down for ceiling-mounted projection. Use th is function to choose your desired aspect ratio. Auto: Keep the image with original width-higth ratio and maxi mize the image to fit native horizontal or vertical pixels. 4:3: The image will be scaled to fit the screen and displayed using a 4:3 ratio. 16:9: The image will be scaled to fit the width of the screen and the height adjusted to display the image using a 16:9 ratio. Full: Resize image to fit full screen by width (1280 pixels) and height (800 pixels) L.Box: Keep original signal aspect ratio and zoom in by 1.333 times. Automatically adjusts vertical image. Adjust image distortion caused by tilting projection. (±40 degrees) The Manual Keystone function is unavailable under Auto Keystone setting to “On ‘I . Adjusts the sharpness of the image. Press to decrease the sharpness. Press to increase the sharpness.

****** Page 31 ****** 21 H. Position V. Position Frequency Tracking Press Press Press Press to move the image left. to move the image right. to move the image down. to move the image up. “Frequency” changes the projector’s refresh rate to match the frequency of your computer’s graphics card. If you can see a vertical flickering bar in the projected image, use this function to make the necessary adjustments. Synchronizes the signal timing of the projector with the graphics card. If you experience an unstable or flickering image, use this function to correct it. HDMI Color Range Adjust the color range of the HDMI image data to correct color display error. Auto: Automatically adjust by information from player. Limited Range: Prosess the input image as limited color range data. Full Range: Prosess the input image as full color range data. HDMI Scan Info Adjust the overscan ratio of the HDMI image on screen. Auto: Automatically adjust by information from player. Underscan: Always no overscan on HDMI image. Overscan: Always keep overscan on HDMI image. Note: “H. Position”, “V. Position”, “Frequency” and “Tracking” functions are not supported under HDMI, DVI or Video mode. Note: “Sharpness” functions is not supported under HDMI (RGB) or Computer mode. Note: ” HDMI Color Range” and ” HDMI Scan Info” functions are only supported under HDMI mode.

****** Page 32 ****** 22 Setting Menu Location Reset Settin Choose the menu location on the display screen. Press the button and choose “Yes” to return the parameters on all menus to the factory default settings. Management Managemen ktüde orr Auto SfiL1dom Sée•ct. Irstmt ECO Mode High Altitude Turn Off Mode Auto Shutdown LED Calibration Choose “On” to dim the projector lamp which will lower power consumption, extend the lamp life and reduce noise. Choose “Off” to return normal mode. Choose “On” to turn on High Altitude mode. Operate the fans at full speed continuously to allow for proper high altitude cooling of the projector. Instant Off: Shuts down the projector without fan cooling. Instant Resume: Resumes the system when the Power button is pressed again within 2 minutes. The projector will automatically shutdown when there is no signal input after the allocated time. (default is 120 minutes) Press after choosing “Yes”, please wait for 10 seconds to finish the white color fine tune process. It helps to adjust LED color performance.

****** Page 33 ****** 23 Audio Volume Mute Alarm Volume Audio Out 3D Sync Invert 4) Audio Mute Alarm Audio ut Press to decrease the volume. Press to increase the volume. Choose “On ” to mute the volume. Choose “Off” to restore the volume. Select this function to adjust the volume of any warning notifications. Choose “Speaker” to play sound through the projector’s speaker.(internal) Choose “Audio Jack” to play sound from your headphone or audio amplifier. (external) 3D 30 30 Waning •rr.er Choose “On ” to enable DLP 3D function. • On: Choose this item while using DLP 3D glasses, quad buffer (NVIDIA/ATI…) graphic card and HQFS format file or DVD with corresponding SW player. • Off: Turn oft 3D mode. If you see a discrete or overlapping image while wearing DLP 3D glasses, you may need to execute ” Invert” to get best match of left/right image sequence to get the correct image (for DLP 3D).

****** Page 34 ****** 24 3D Warn ing Message Choose “On ” to display the 3D warning message. Note: 30 display is r.ovv enabled Please make sure you have the correct 30 signals and glasses. 2. Remember to turn 3D off if yoc dcnt want to see 30 images. 3, Ifthe 3D display iont correct. please try to enable 3D Sync Irwert. 4, Display mode options be disabled while in 30 mode, Note: It needs correct settings on graphic card 3D application program for correct 3D display. Note: The SW players, such as Stereoscopic Player and DDD TriDef Media Player can support 3D format files. You can download these three players on web page below, – Stereoscopic Player (Trial): 3dtv.at/Downloads/lndex_en.aspx – DDD TriDef Media Player (Trial): http:/Avww.tridef.com/down load/TriDef-3-D-Experience-4.0.2.htm I Note: “3D Sync Invert” is only available when 3D is enabled. Note: There has rem inder screen if 3D still enable when power on projector Please adjust setting depended on your purpose. Language Language Language Vi+’t Choose the multilingual OSD menu. Use the A or v key to select your preferred menu language. Press to confirm the selection.

****** Page 35 ****** 25 Appendices Troubleshooting If you experience a problem with your Acer projector, refer to the following troubleshooting guide. If the problem persists, please contact your local reseller or service center. Image Problems and Solutions 2 Problem No image appears onscreen Partial, scrolling or incorrectly displayed image (For PC (Windows 95/98/2000/XP/ VistaAVin7NVin 8)) Solution Connected as described in the “Getting Started” section. Ensure none of the connector pins are bent or broken. Make sure the projector is switched on. For an incorrectly displayed image: Open ” My Computer,” open the “Control Panel,” and then double-click the “Display” Icon. Select the ” Settings” tab Verify that your display resolution setting is lower than or equal to 1080P-ElA. Click the “Advanced Properties” button. If the problem still appears, change the monitor display you are using and follow the steps below: Verify that the resolution setting is lower than or equal to 1080P-ElA. Click the “Change” button under the ” Mon itor” tab. Click “Show all devices”. Next, select “Standard mon itor types” under the SP box, and choose the resolution mode you need under the ” Models” box. Verify that the resolution setting of the mon itor display is lower than or equal to 1080P-ElA.

****** Page 36 ****** 26 3 4 5 6 7 8 Partial, scrolling or incorrectly displayed image (for notebooks) The screen of the notebook computer is not displaying your presentation Image is unstable or flickering Image has vertical flickering bar Image is out of focus Image is stretched when displaying a ” widescreen DVD title For an incorrectly displayed image: Follow the steps for item 2 (above) to adjust the resolution of your computer. Press the toggle output settings. Example: [Fn]+[F4], Compaq Dell Gateway IBM HP NEC Tosh iba If you experience difficulty changing resolutions or your monitor freezes, restart all equipment including the projector. If you are using a Microsofte Windows@ based notebook: Some notebook PCs may deactivate their own screens when a second display device is in use. Each has a different way to be reactivated. Refer to your computer’s manual for detailed information. If you are using an Apple Mac@ OS based notebook: In System Preferences, open Display and select Video Mirroring “On” Adjust the “Tracking” to correct it. Refer to the ” Image” section for more information. Change the display color depth settings on your computer. Use “Frequency” to make an adjustment. Refer to the ” Image” section for more information. Check and reconfigure the display mode of your graphics card to make it compatible with the projector. Adjusts the focus ring on the projector lens. Make sure the projection screen is within the requ ired distance of 3.18-8.46 feet (0.97-2.58 meters) from the projector. Refer to the ” How to Get a Preferred Image Size by Adjusting Distance and Zoom ” section for more information. When you play a DVD encoded in anamorphic or 16:9 aspect ratio you may need to adjust the following settings: If you play a 4:3 format DVD title, please change the format to 4:3 in the projector OSD. If the image is still stretched, you will also need to adjust the aspect ratio. Set up the display format to 16:9 (wide) aspect ratio on your DVD player. If you play an Letterbox(LBX) format DVD title, please change the format to Letterbox(LBX) in the projector OSD.

****** Page 37 ****** 9 10 11 Image is too small or too large Image has slanted sides Image is reversed 27 Adjust the zoom ring on the top of the projector. Move the projector closer to or further from the screen. Press “MENU” on the remote control or on the control panel. Go to “Image –> Aspect Ratio” and try different settings. If possible, reposition the projector so that it is centered on the screen. Press the Keystone” on the OSD until the sides are vertical. Select “Image –> Projection Mode” on the OSD and adjust the projection direction. Problems with the Projector Condition The projector stops responding to all controls Solution If possible, turn off the projector, then unplug the power cord and wait at least 30 seconds before reconnecting power.

****** Page 38 ****** 28 OSD Messages Condition Message Message Reminder Fan Fail – the system fan is not working. Fan Fail. Will automatically turn off soon Projector Overheated – the projector has exceeded its recommended operating temperature and must be allowed to cool down before it may be used. Projector Overheated. Will automatical y turn off soon

****** Page 39 ****** LED & Alarm Definition Listing LED Messages Message Input Power Plug Standy by Power buttom on Lamp retry Power button OFF; Standby Mode) Error (Thermal fail) Error (Fan Lock) Error (Lamp Break down) Menu BLUE ON Isec then off Lamp (UP/Down LED) BLUE Flash On to OFF IOOms ON Isec then off ON Temp (Left/Right LED) BLUE Flash On to OFF 100m s ON Isec then off ON Qu ick Flashing Power LED RED Flash On to OFF 100ms ON ON 29 Power LED BLUE ON Quick Flashing ON ON ON Note: When power on, click any key, Menu/Up/Down/Left/Right key LED will all be trigger.

****** Page 40 ****** 30 Specifications The specifications listed below are subject to change without notice. For final specs, please refer to Acer’s published marketing specifications. Projection system Resolution Computer compatibility Aspect ratio Displayable colors Projection lens Projection screen size (diagonal) Projection distance Throw ratio Horizontal scan rate Vertical refresh scan rate Keystone correction Weight Dimensions (W x D x H) Power supply Power consumption Operating temperature 1/0 connectors DLP@ WXGA (1280 x 800) IBM PC and compatibles, Apple Macintosh, iMac and VESA standards: SXGA, XGA, SVGA, VGA, WXGA Full, 4:3, 16:9, L Box 16.7 million colors YMIOI, fixed lens, F/2.O 30″ (0.76 m) – 80″ (2.03 m) 3.181 (0.97 m) – 8.46′ (2.58 m) 40″ @ 1.292 m (1.5:1) 30k – 100 kHz 50- 120 Hz +/- 40 degrees K 135/1<135P/K135S/K135i/L221/LK-W12: 0.43 Kg (0.95 lbs) K 132/1<132P/L221F/LK-W12L: 0.415 Kg (0.92 lbs) 140 mm x 116 mm x 41 mm (5.51" x 4.57" x 1.61") AC 100-240 V, 50-60 Hz Normal mode: 55 W +/- 20% @ 110 Vac (Bright mode @ fu II power) ECO mode: 45 W +1-20% @ 110 Vac (Movie mode @ eco power) Standby < 0.5 W 5 oc to 40 OF to 104 OF • DC input xl Micro SD xl (for K135/K135P/K135S/K135i/L221/ LK-W12 only) USB xl: for multimedia (for K 135/1<135P/K135S/ K 135 i/L221/LK-W12 on ly) Mini USB xl (for K132/K132P/L221F/LK-W12L on ly) HDMI (MI-IL) xl Universal input xl ****** Page 41 ****** Standard package contents 31 Power cord xl Remote control xl Battery xl (for remote control) User's guide (CD-ROM) xl (for projector function) User's guide (CD-ROM) xl (for multi-media and wireless functions) (for 1<135/K135P/K135S/K135i/ L 221/LK-W12 only) Quick start guide xl (for projector function) Quick start guide xl (for multi-media and wireless functions) (for K 135/1<135P/K135S/K135i/ L221/ LK-W12 only) Carrying case xl * Design and specifications are subject to change without notice. ****** Page 42 ****** 32 Compatibility modes A. VGA Analog 1 VGA Analog PC Signal Modes VGA SVGA XGA SXGA QuadVGA SXGA+ PowerBook G4 PowerBook G4 PowerBook G4 PowerBook G4 PowerBook G4 PowerBook G4 i Mac DV (G3) Resolution 640×480 640×480 640×480 640×480 640×480 800×600 800×600 800×600 800×600 800×600 800×600 1024×768 1024×768 1024×768 1024×768 1024×768 1152×864 1152×864 1 152×864 1280×1024 1280×1024 1280×1024 1280×960 1280×960 1400×1050 640×480 640×480 800×600 1024×768 1152×870 1280×960 1024×768 V.Frequency [HzJ 60 72 75 85 120 56 60 72 75 85 120 60 70 75 85 120 70 75 85 60 72 75 60 75 60 60 66.6 (67) 60 60 75 75 75 H.Frequency [KHz] 31.5 37.9 37.5 43.3 61.9 35.1 37.9 48.1 46.9 53.7 77.4 48.4 56.5 60.0 68.7 99.0 63.8 67.5 77.1 64.0 77.0 80.0 60.0 75.2 65.3 31.4 34.9 37.9 48.4 68.7 75.0 60.0 ****** Page 43 ****** 2 3 1 VGA Analog – Extended Wide timing Modes WXGA WSXGA+ VGA Analog Modes 480i 576i 480p 576p 720p 720p 1080i 1080i 1080p 1080p Resolution 1280×768 1280×768 1280×768 1280×720 1280×800 1440×900 1680×1050 x (Reduced V.Frequency [Hzl Blanking Timing 1366×768 Component Signal 60 75 85 60 60 60 60 60 60 B. HDMI Digital HDMI – PC Signal Modes VGA SVGA Resolution 720×480 720×576 720×480 720×576 1280×720 1280×720 1920×1080 1920×1080 1920×1080 1920×1080 Resolution 640×480 640×480 640×480 640×480 640×480 800×600 800×600 800×600 800×600 800×600 800×600 V.Frequency (Hz] 59.94(29.97) 50(25) 59.94 50 60 50 60 (30) 50 (25) 60 50 V.Frequency [Hz] 60 72 75 85 120 56 60 72 75 85 120 33 H.Frequency [KHz] 47.8 60.3 68.6 44.8 49.6 59.9 65.3 66.6 47.7 H.Frequency [KHz] 15.7 15.6 31.5 31.3 45.0 37.5 33.8 28.1 67.5 56.3 H.Frequency [KHz] 31.5 37.9 37.5 43.3 61.9 35.1 37.9 48.1 46.9 53.7 77.4 ****** Page 44 ****** 34 2 XGA SXGA QuadVGA SXGA+ PowerBook G4 PowerBook G4 PowerBook G4 PowerBook G4 PowerBook G4 PowerBook G4 i Mac DV (G) 1024×768 1024×768 1024×768 1024×768 1024×768 1152×864 1 152×864 1152×864 1280×1024 1280×1024 1280×1024 1280×960 1280×960 1400×1050 640×480 640×480 800×600 1024×768 1152×870 1280×960 1024×768 HDMI Extended Wide timing Modes WXGA WSXGA+ Resolution 1280×768 1280×720 1280×800 1440×900 1680×1050 1920×1080 (Reduced Blanking Timin ) 60 70 75 85 120 70 75 85 60 72 75 60 75 60 60 66.6 (67) 60 60 75 75 75 V.Frequency [Hz] 60 75 85 60 60 60 60 60 60 48.4 56.5 60.0 68.7 99.0 63.8 67.5 77.1 64.0 77.0 80.0 60.0 75.2 65.3 31.4 34.9 37.9 48.4 68.7 75.0 60.0 H.Frequency [KHz] 47.8 60.3 68.6 44.8 49.6 59.9 65.3 66.6 47.7 ****** Page 45 ****** 3 HDMI Modes 480i 576i 480p 576p 720p 720p 1080i 1080i 1080p 1080p Video Signal Resolution 720×480(1440×480) 720×576(1440×576) 720×480 720×576 1280×720 1920×1080 1920×1080 1920×1080 1920×1080 Horizontal scan rate: Vertical scan rate: Max. pixel rate V.Frequency [Hz] 59.94 (29.97) 50 (25) 59.94 50 60 50 60 (30) 50 (25) 60 50 30120cm/low Radiation Exposure Statement: This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. (*for K135i/L22 IR/LK-W12F series only)

****** Page 49 ****** Acer Incorporated F, SS, sec. Xlzhi New Taipei CIV 221, Taiv:an Declaration of Conformity Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd., Xizhi, New Taipei City 221, Taiwan And, Acer Italy s.r.l. Via Lepetit, 40, 20020 Lainate (MI) Italy Tel: +39-02-939-921 ,Fax: +39-02 9399-2913 wv,w.acer.lt Product: Trade Name: Model Number: DLP Projector Acer cwX1137/CWX1147 K135/K135PK135S/L221LK-W12 K132/K132P/L221F/LK-W12L We, Acer Incorporated, hereby declare under our sole responsibility that the product described above is in conformity with the relevant Union harmonization legislations as below Directive and following harmonized standards and/or other relevant standards have been applied EMC Directive: 2014/30/EU EN 550322012+Ac:2013, Class B EN 550242010+A1:201S R&TTE Directive: 1999/5ÆC (until Jun 12.2017) RED Directive: 2014/53/EU rom Jun 13 2017 EN 61000-3-22014: Class A EN 61000-3-32013 EN 300 328 EN 301 893 Vl.7.1 EN 300 440-1 Vl.6.1 EN 300 440-2 Vl.4.1 EN 302 291-1 VI-I-I EN 302 291-2 EN 301 511 VO.02 EN 301 908-1 EN 301 908-2 EN 301 908-13 V621 EN 301 489-1 EN 301 489-3 EN 301 489-7 EN 301 489-17 V221 EN 301 489-24 VI-il o EN 503602001 EN 505662013 o EN 624792010 EN 623112008 EN 62209-12006 0 EN 62209-22010 LVD Directive: 2014/35ÆU EN A2:2013 EN 50332-112013 RoHS Directive: 2011/65/EU EN 505812012 Erp Directive: 2009/125ÆC 617 2013 No. 505642011 Year to begin affixing CE marking 2017. RU Jan / Sr. Manager Acer Incorporated (Taipei, Taiwan) Regulation (ECO No. 278.0009; EN Jan. 01 2017 Date

****** Page 50 ****** Acer Incorporated F, SS, sec. Xlzhi New Taipei CIV 221, Taiv:an Declaration of Conformity Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd., Xizhi, New Taipei City 221, Taiwan And, Acer Italy s.r.l. Via Lepetit, 40, 20020 Lainate (MI) Italy Tel: +39-02-939-921 ,Fax: +39-02 9399-2913 wv,w.acer.lt Product: Trade Name: Model Number: DLP Projector Acer cwX1137 K135i/L221RLK-W12F We, Acer Incorporated, hereby declare under our sole responsibility that the product described above is in conformity with the relevant Union harmonization legislations as below Directive and following harmonized standards and/or other relevant standards have been applied EMC Directive: 2014/30/EU EN 550322012+Ac:2013, Class B EN 550242010+A1:201S @ R&TTE Directive: 1999/5ÆC (until Jun 12.2017) @ RED Directive: 2014/53/EU rom Jun 13 2017 EN 61000-3-22014: Class A EN 61000-3-32013 EN 300 328 EN 301 893 Vl.7.1 EN 300 440-1 Vl.6.1 EN 300 440-2 Vl.4.1 EN 302 291-1 VI-I-I EN 302 291-2 EN 301 511 VO.02 EN 301 908-1 EN 301 908-2 EN 301 908-13 V621 EN 301 489-1 EN 301 489-3 EN 301 489-7 EN 301 489-17 V221 EN 301 489-24 VI-il o EN 503602001 EN 505662013 o EN 624792010 EN 623112008 EN 62209-12006 0 EN 62209-22010 LVD Directive: 2014/35ÆU EN A2:2013 EN 50332-112013 RoHS Directive: 2011/65/EU EN 505812012 Erp Directive: 2009/125ÆC 617 2013 No. 505642011 Year to begin affixing CE marking 2017. RU Jan / Sr. Manager Acer Incorporated (Taipei, Taiwan) Regulation (ECO No. 278.0009; EN Jan. 01 2017 Date

****** Page 51 ****** acer Acer America Corporation 333 West San Carlos sty, suite 1500 San Jose, CA 95110 Tel: 2542984000 Fax: 254-298-4147 acer.COtn Federal Communications Commission Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The following local Manufacturer / Importer is responsible for this declaration: Product: Model Number: Machine Type: Name of Responsible Party: Address of Responsible Party: Contact Person: Phone No.: Fax No.: DLP Projector cwxq 137/cwx1147 K135/K135P/K135S/K135i/L221/LK-W12/ K132/K132P/L221 F/LK-W12L Acer America Corporation 333 West San Carlos St. Suite 1500 San Jose, CA 95110 U.S.A. Acer Representative 254-298-4000 254-298-4147


FREE ENGLISH PDF

OPERATING INSTRUCTIONS

USER GUIDE – USER MANUAL

OWNER GUIDE – OWNER MANUAL

REFERENCE GUIDE – REFERENCE MANUAL

INSTRUCTION GUIDE – INSTRUCTION MANUAL

ACER K135P (01) PDF MANUAL

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.