Post questions, comments, reviews or page errors in the comment box below.
PDF Content Summary:
****** Page 1 ****** Acer Projector H7550ST/E155S/HE-815ST/HIP1403/ H7550STz/H7550BD/E155D/HE-815J/ HIP1406/H7550BDz/Z650/EG40S/ HG-80ST/QIP1504 Series User’s Guide
****** Page 2 ****** Copyright 0 2014. Acer Incorporated. All Rights Reserved. Acer Projector User’s Guide Original Issue: 11/2014 Changes may be made periodically to the information in th is publication without obligation to notify any person of such revisions or changes. Such changes will be incorporated in new editions of this manual or supplementary documents and publications. This company makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims the implied warranties of merchantability or fitness for a particular purpose. Record the model number, serial number, purchase date and place of purchase information in the space provided below. The serial number and model number are recorded on the label affixed to your projector. All correspondence concern ing your unit should include the serial number, model number and purchase information. No part of th is publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electron ically, mechanically, by photocopy, recording or otherwise, without the prior written permission of Acer Incorporated. Acer Projector Model number: Serial number: Date of purchase: Place of purchase: Acer and the Acer logo are registered trademarks of Acer Incorporated. Other compan iesl product names or trademarks are used herein for identification purposes only and belong to their respective companies. “HDMITM, the HDMI logo and High-Defin ition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.”
****** Page 3 ****** iii Information for Your Safety and Comfort Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. Turning the product off before cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. Caution for plug as disconnecting device Observe the following guidelines when connecting and disconnecting power to the external power supply unit: Install the power supply unit before connecting the power cord to the AC power outlet. Unplug the power cord before removing the power supply unit from the projector. If the system has multiple sources of power, disconnect power from the system by unplugging all power cords from the power supplies. Caution for Accessibility Be sure that the power outlet you plug the power cord into is easily accessible and located as close to the equipment operator as possible. When you need to disconnect power to the equipment, be sure to unplug the power cord from the electrical outlet. Warnings! Do not use this product near water. Do not place this product on an unstable cart, stand or table. If the product falls, it could be seriously damaged. Slots and openings are provided for ventilation to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should never be placed near or over a radiator or heat register, or in a built-in installation unless proper ventilation is provided. • Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind onto or into the product.
****** Page 4 ****** To avoid damage of internal components and to prevent battery leakage, do not place the product on a vibrating surface. Never use it under sporting, exercising, or any vibrating environment which will probably cause unexpected short current or damage rotor devices or lamp. Using electrical power This product should be operated from the type of power indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company. Do not allow anything to rest on the power cord. Do not locate this product where people will walk on the cord. If an extension cord is used with this product, make sure that the total ampere rating of the equipment plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure that the total rating of all products plugged into the wall outlet does not exceed the fuse rating. Do not overload a power outlet, strip or receptacle by plugging in too many devices. The overall system load must not exceed 80% of the branch circuit rating. If power strips are used, the load should not exceed 80% of the power strip’s input rating. This product’s AC adapter is equipped with a three-wire grounded plug. The plug only fits in a grounded power outlet. Make sure the power outlet is properly grounded before inserting the AC adapter plug. Do not insert the plug into a non-grounded power outlet. Contact your electrician for details. Warning! The grounding pin is a safety feature. Using a power outlet that is not properly grounded may result in electric shock and/or injury. Note: The grounding pin also provides good protection from unexpected noise produced by other nearby electrical devices that may interfere with the performance of this product. Use the product only with the supplied power supply cord set. If you need to replace the power cord set, make sure that the new power cord meets the following requirements: detachable type, UL listed/CSA certified, VDE approved or its equivalent, 4.5 meters (14.76 feet) maximum length.
****** Page 5 ****** Product servicing Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel. Unplug this product from the wall outlet and refer servicing to qualified service personnel when: the power cord or plug is damaged, cut or frayed liquid was spilled into the product the product was exposed to rain or water the product has been dropped or the case has been damaged the product exhibits a distinct change in performance, indicating a need for service the product does not operate normally after following the operating instructions Note: Adjust only those controls that are covered by the operating instructions, since improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal condition. Warning! For safety reasons, do not use non-compliant parts when adding or changing components. Consult your reseller for purchase options. Your device and its enhancements may contain small parts. Keep them out of the reach of small children. Additional safety information Do not look into the projector’s lens when the lamp is on. The bright light may hurt your eyes. RG2 IEC 62471-52015 Turn on the projector first and then signal sources. Do not place the product in the following environments: Space that is poorly ventilated or confined. At least 50cm clearance from walls and free flow of air around the projector are necessary. Locations where temperatures may become excessively high, such as inside of a car with all windows rolled up. Locations where excessive humidity, dust, or cigarette smoke may contam inate optical components, shorten the life span and darken the image. Locations near fire alarms. Locations with an ambient temperature above 40 oc/104 OF
****** Page 6 ****** vi Locations where the altitudes are higher than 10000 feet. Unplug immediately if there is something wrong with your projector. Do not operate if smoke, strange noise or odor comes out of your projector. It might cause fire or electric shock. In this case, unplug immediately and contact your dealer. Do not keep using this product to break or drop it. In this case contact your dealer for inspection. Do not face the projector lens to the sun. It can lead to fire. When switching the projector off, please ensure the projector completes its cooling cycle before disconnecting power. Do not frequently turn off the main power abruptly or unplug the projector during operation. The best way is to wait for the fan to stop before turning main power off. Do not touch the air outlet grille and bottom plate which become hot. Do not look into the air outlet grille when projector is operating. It may hurt your eyes. Always open the lens shutter or remove the lens cap when the projector is on. Do not block the projector lens with any object when the projector is under operation as this could cause the object to become heated and deformed or even cause a fire. To temporarily turn off the lamp, press HIDE on the remote control. The lamp becomes extremely hot during operation. Allow the projector to cool for approximately 45 minutes prior to removing the lamp assembly for replacement. Do not operate lamps beyond the rated lamp life. It could cause it to break on rare occasions. Never replace the lamp assembly or any electronic components unless the projector is unplugged. The product will detect the life of the lamp itself. Please be sure to change the lamp when warning messages display. When changing the lamp, please allow the projector to cool down, and follow all changing instructions, Reset the i’ Lamp Hour Reset” function from the Onscreen Display “Management” menu after replacing the lamp module. Do not attempt to disassemble this projector. There are dangerous high voltages inside which may hurt you. The only user serviceable part is the lamp which has its own removable cover. Refer servicing only to suitable qualified professional service personnel. Do not stand the projector on end vertically. It may cause the projector to fall over, causing injury or damage. This product is capable of displaying inverted images for ceiling mount installation. Only use acer ceiling mount kit for mounting the projector and ensure it is securely installed. The radio module certified by Japanese Radio Law is integrated inside.
****** Page 7 ****** vii Caution for Listening To protect your hearing, follow these instructions. Increase the volume gradually until you can hear clearly and comfortably. Do not increase the volume level after your ears have adjusted. Do not listen to music at high volumes for extended periods. Do not increase the volume to block out noisy surroundings. Decrease the volume if you can’t hear people speaking near you . Disposal instructions Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle. For more information on the Waste from Electrical and Electronics Equipment (WEEE) regulations, visit acer-group.com/public/ Sustainabilitynndex.htm Mercury advisory For projectors or electronic products containing an LCD/CRT monitor or display: “Lamp(s) contain Mercury, Dispose Properly.” Lamp(s) inside this product contain mercury and must be recycled or disposed of according to local, state or federal laws. For more information, contact the Electronic Industries Alliance at eiae.org. For lamp-specific disposal information, check lamprecycle.org
****** Page 8 ****** vili First Thing First Usage Notes Do: • Turn off the product before cleaning. • Use a soft cloth moistened with mild detergent to clean the display housing. • Disconnect the power plug from AC outlet if the product is not being used for a long period of time. Don’t Block the slots and openings on the projector provided for ventilation. Use abrasive cleaners, waxes or solvents to clean the unit. Use under the following conditions: In extremely hot, cold or humid environments. In areas susceptible to excessive dust and dirt. Near any appliance that generates a strong magnetic field. Place in direct sunlight. Precautions Follow all warnings, precautions and maintenance as recommended in this user’s guide to maximize the life of your unit. Warning: Do not look into the projector’s lens when the lamp is on. The bright light may hurt your eyes. To reduce the risk of fire or electric shock, do not expose th is product to rain or moisture. Please do not open or disassemble the product as this may cause electric shock. When changing the lamp, please allow the projector to cool down, and follow all changing instructions. Th is product will detect the life of the lamp itself. Please be sure to change the lamp when it shows warning messages. Reset the “Lamp Hour Reset” function from the Onscreen Display “Management” menu after replacing the lamp module When switch ing the projector off, please ensure the projector completes its cooling cycle before disconnecting power. Turn on the projector first and then the signal sources. Do not use lens cap when projector is in operation. When the lamp reaches the end of its life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn back on until the lamp module has been replaced. To replace the lamp, follow the procedures listed under “Replacing the Lamp ” .
****** Page 9 ****** Information for Your Safety and Comfort First Thing First Usage Notes Precautions Introduction Product Features Package Overview Projector Overview Projector Outlook Control Panel Remote Control Layout MHL Feature Introduction Getting Started Connecting the Projector Turning the Projector On/Off Turning On the Projector Turning Off the Projector Adjusting the Projected Image Adjusting the Height of the Projected Image How to Optimize Image Size and Distance How to Get a Preferred Image Size by Adjusting Distance and Zoom User Controls Installation Menu Onscreen Display (OSD) Menus Color Image Setting Management Audio Language iii viii vili vili 1 2 3 3 4 5 7 8 8 9 9 10 11 11 12 14 16 16 18 20 21 25 25 27 28
****** Page 10 ****** Appendices Troubleshooting LED & Alarm Definition Listing Using the inner connector(s) Replacing the Lamp Ceiling Mount Installation Specifications Compatibility Modes Regulations and safety notices 29 29 33 34 35 36 39 41 45
****** Page 11 ****** 1 Introduction Product Features This product is a single-chip DLP@ projector, including the following outstanding features: DLP@ technology Native 1920 x 1080 1080p resolution, Auto/Full/4:3/16:9/L.Box/16:6 aspect ratio supported Enables projecting 3D content via DLP Link Technology: Blu-Ray 3D supported and Nvidia 3DTV Play Ready Enriches 3D experience for 2D contents via 2D to 3D convert function One-touch i’Gi’ or i’ 3D” button on remote control allows quick and easy access to the G or 3D functions Acer ColorBoost technology delivers vivid, life-like images High brightness and contrast ratio Versatile display modes enable optimum performance in any situation NTSC/PAUSECAM compatible and HDTV (720p, 1080i, 1080p) supported Lower power consumption and economy (ECO) mode extends lamp life Dynamic Black / ExtremeEco functions help decrease lamp power consumption and further extend lamp life. – Dynamic Black: If turned on, the projector dynamically adjusts the power consumption of the lamp according to the brightness of the image being projected. When projecting darker images the power consumption will be reduced and the contrast of the image will also be enhanced. – ExtremeEco: The projector will decrease the power consumption of the lamp by up to 70% when no input signal can be detected for 5 minutes. Acer EcoProjection Technology delivers Intelligent power management approach and physical efficiency improvement Advanced keystone correction delivers optimum presentations Multi-language Onscreen Display (OSD) menus Manual focus/zoom projection lens 2X digital zoom and pan move function Microsoft@ Windows@ 2000, XP, 7, 8, 8.1, Vista@, Macintosh OS, Chrome OS compliant Built-in 20W speaker DTS sound effect CEC (Consumer Electronics Control) function supported
****** Page 12 ****** 2 Package Overview This projector comes with all the items shown below. Check to make sure you have them all. Contact your dealer immediately if any thing is missing. Projector Acer Projector Security Card Security card (Optional) Projector Quick start guide 3D glasses kit (Optional) Power cord User’s gu ide (CD-ROM) Battery x 2 VGA cable oooc Remote control Carrying case (Optional)
****** Page 13 ****** Projector Overview Projector Outlook Front/upper side 1 2 3 (H7550BD/E155D/HE-815J/ H I P1406/H7550BDz) 4 5 6 2 7 8 1 2 3 3 4 5 6 2 7 8 (H7550ST/E155S/HE-815ST/ HIP 1403/H7550STz/Z650/EG40S/ HG-80ST/QIP1504) 1 2 3 4 escriptlon Control panel Speaker Elevator b utton Power key and Power indicator LED 5 6 7 8 6 escriptlon Focus ring and Zoom ring HDMI (MHL) connector Micro USB cable Projection lens Remote control receiver Rear side 5 1 2 3 4 5 6 7 1 9 10 escnptlon RS232 connector HDMI (MHL) connector HDMI connector Mini USB connector S-Video input connector 11 Composite video input connector Analog RGB signal/HDTV/component video input connector Component Video inputs 12 8 9 10 11 12 13 8 13 escrip Ion Audio input connector Audio output connector Tilt adjusting wheel Power socket DC 5V out Monitor loop-through output connector KensingtonTM lock port
****** Page 14 ****** 4 Control Panel 1 2 POWER LAMP 4 RESYÅc 6 7 TEMP 8 711 SOURCE 9 1 *MODE 10 3 1 2 3 4 5 6 7 8 9 10 Function LAMP POWER indicator LED Keystone RESYNC MENU Power key TEMP SOURCE Four directional selection keys MODE Description Lamp Indicator LED. Refer to the “Turning the Projector On/Off” section. Adjusts image distortion caused by tilting projection. Automatically synchronizes the projector to the input source. Launches the Onscreen Display (OSD) menu, returns to the previous step for the OSD menu operation or exits the OSD menu. Refer to the “Turning the Projector On/Off” section. Temp Indicator LED. Chooses RGB, component video, S-Video, composite video, HDMI (MHL) or HDTV source. Selects items or makes adjustments to your selection Chooses a display mode.
****** Page 15 ****** Remote Control Layout (H7550BD/E155D/HE-815J/HIP1406/ H7550BDz/H7550ST/E155S/HE-815ST/ HIP1403/H7550STz) 5 (Z650/EG40S/HG-80ST/QIP1504) 11 24 I G 8—13 I—cb 3 18 5- 8 21 10 1 2 3 4 5 6 7 8 9 10 11 12 7 8 9 O 11 23 14 12 15 .16 22 19 Model NO ;RC-JSE28-190 coc MCOK211 007 211–8 3 23 5- 7 21 1 Description 14 12 15 19 No-E-26371 Rating: OC 3V – 60mAMAX. UAOÉ ‘N CHINA Function POWER MEDIA SETUP zooM MODE Keystone Four directional selection keys Keypad VGA COMPONENT S-VIDEO HDMITM/MHL Infrared transmitter FREEZE Refer to the “Turning the Projector On/Off” section. (No function) Zooms the projector display in or out. Chooses a display mode. Adjusts image distortion caused by tilting projection. Selects items or makes adjustments to your selection. Press “0—9” to input a password in the “Setting ” > “Security” OSD. To change source to VGA This connection supports analog RGB, YPbPr (480p/576p/720p/1080i/1080p), and YCbCr (480i/576i). To change source to Component video. This connector supports Y Pb Pr/YCbCr. To change source to S-Video. To change source to HDMITM (or MHL). (for the model with HDMITM or MHL connector) Sends signals to the projector. To pause the screen image.
****** Page 16 ****** 6 13 14 15 16 17 18 19 20 21 22 23 24 Function SOURCE HIDE MENU PgUp/PgDn VIDEO RATIO WIRELESS; LANTWiFi Rewind Play/Pause Stop Fast-forward SD/USB A USB B Description Chooses RGB, component video, S-Video, composite video, HDMI (MHL) or HDTV source. Press ” HIDE” to hide screen image; press again to display the image. Launches the Onscreen Display (OSD) menu, returns to the previous step for the OSD menu operation or exits the OSD menu. For computer mode only. Use this button to select the next or previous page. This function is only available when connected to a computer via a USB cable. To change source to composite video. Chooses an aspect ratio. (No function) (No function) (No function) (No function) Press to open the 3D menu for adjusting 3D settings. Chooses a display mode for game content from among the following modes: Game Auto, Dark FPS, Bright FPS, sRGB.
****** Page 17 ****** 7 MHL Feature Introduction When your smart device is connected to the projector, you can use some buttons on the remote control to control your smart device. Press “MODE” for one second to enter or leave the MHL control mode. After entering the MHL control mode, press “SOURCE” to switch between the navigation mode (default), media mode and numeric mode. 4 13 5 6 15 20 Function MODE SOURCE Four directional select keys Keypad MENU Rewind II Play/Pause Stop Fast-forward escrip Ion Navigation Media mode Numeric mode mode Long press for one second to enter or leave the MHL control mode. After entering the MHL control mode, press to switch between the navigation mode (default), media mode and numeric mode. Up down Left Right Up down Left Right (No function) Goes to the root menu. (No function) Selects or enters items. Exits current page. (No function) (No function) (No function) Decreases the volume. Increases the volume. (No function) (No function) Rewinds/Plays/ Pauses/Stops/ Fast-forwards the playing media files. (No function) (No function) (No function) (No function) Enters 0-9. (No function) Enters 1. Enters 2. Enters 3. (No function)
****** Page 18 ****** 8 Getting Started Connecting the Projector 7 RS232 Smartphone/ USB Display D-Sub 2 VGA D-Sub 2 4 VD player, Set-top box, HDTV receiver Video/S-Video Output 5 8 9 RS232 6 o tablet 9 RS232 10 3 0-50b D-Sub R B G 1 4 Speakers 4 1 2 11 7 8 11 1 10 escnp Ion Power cord VGA cable 11 escrip Ion USB cable 3 RCA component cable
****** Page 19 ****** 3 4 5 6 Description Composite video cable Audio cable S-Video cable RS232 cable 9 10 11 9 Description HDMI (MI-IL) cable WirelessHD dongle Wireless dongle Note: To ensure the projector works well with your comp uter, please make sure the timing of the display mode is compatible with the projector. Note: Some smart devices require a converter (supplied by the smart device maker) to enable the MHL function. Note: Compatible HDMI/MHL dongles: WirelessHD, MWA3, Android, ChromecastTM Turning the Projector On/Off Turning On the Projector 1 2 3 Ensure that the power cord and signal cable are securely connected. The Power LED will light red. Turn on the projector by pressing (D (POWER) on the control panel or remote control, and the Power indicator LED will turn blue. Turn on your source (computer, notebook, video player, etc.). The projector will detect your source automatically (when the Source Lock function is disabled). If the screen displays ” No Signal” , please make sure the signal cables are securely connected. If you connect to multiple sources at the same time, use “SOURCE” on the control panel or remote control, or the direct source key on the remote control to switch between inputs. (H7550BD/E155D/HE-815J/ HIP1406/H7550BDz) (H7550ST/E155S/HE- 815ST/HIP1403/ H7550STz/Z650/ EG40S/HG-80ST/ QIP1504)
****** Page 20 ****** 10 Turning Off the Projector 1 To turn the projector off, press the power button. This message appears: “Please press power button again to complete the shutdown process” Press the power button again. 2 The LED Power indicator will turn solid red to indicate standby mode. It is now safe to unplug the power cord. 3 When Instant Resume is selected. 1 2 3 4 The LED Power indicator will turn RED and blink rapidly after the projector is turned off, and the fan(s) will continue to operate for about 2 minutes to ensure that the system cools properly. As long as the power cord remains plugged in, you can press the power button to turn the projector immediately back on anytime during the 2-mjnute shutdown process. Once the system has finished cooling, the LED Power indicator will stop blinking and turn solid red to indicate standby mode. It is now safe to unplug the power cord. Warning indicators: “Projector Overheated. Lamp will automatically turn off soon. ” This onscreen message indicates that the projector has overheated. The lamp will automatically turn off, the projector will automatically shut down, and the LED Temp indicator will turn solid red. Contact your local dealer or service center. “Fan failed. Lamp will automatically turn off soon. ” This onscreen message indicates that the fan has failed. The lamp will automatically turn off, the projector will automatically shut down, and the LED Temp indicator will blink. Contact your local dealer or service center. Note: Whenever the projector automatically shuts down and the LED Temp indicator turns solid red, contact your local reseller or service center.
****** Page 21 ****** 11 Adjusting the Projected Image Adjusting the Height of the Projected Image The projector is equipped with two elevator feet for adjusting the image height. To raise the image: Press the elevator button. 1 2 Raise the image to the desired height angle, then release the button to lock the elevator foot into position. 3 Use the rear Tilt adjusting wheel to fine-tune the display angle. To lower the image: 1 2 3 Press the elevator button. Lower the image to the desired height angle, then release the button to lock the elevator foot into position. Use the rear Tilt adjusting wheel to fine-tune the display angle. 1117111 Elevator button 1 PUSH 2 Elevator foot 3 Tilt adjusting wheel
****** Page 22 ****** 12 How to Optimize Image Size and Distance Consult the table below to find the optimal image sizes achievable when the projector is positioned at a desired distance from the screen. H7550ST/E155S/HE-815ST/HIP1403/H7550STz/Z650/EG40S/HG-80ST/ QIP1504 If the projector is 3 m from the screen, good image quality is possible for image sizes between 178″ and 196″ Note: Remind as below figure, the space of 251 cm height is required when the projector is located at 3 m distance. screen Size Olin n size Desired distance Minimum Screen Size (Min zoom) Desired From base to 196 8 178″ Height; 228 cm c Height: 251 cm From base to top of image Maximum Screen Size (Max zoom) Distance Diagonal Diagonal (m) 1.5 2 2.5 3 3.5 4 4.5 5 6 7 8 9 10 11 12 Zoom Ratio: (inch) W (cm)x H (cm) top of image (cm) 76 114 152 190 228 266 303 341 379 455 531 607 683 759 834 910 (inch) W (cm)x H (cm) 59 89 119 149 178 208 238 267 297 357 416 475 535 594 654 713 1.1 x 132 x 74 197 x 111 263K 148 329 x 185 395 x 222 461 x 259 526 x 296 592 x 333 658 x 370 789 x 444 921 x 518 1053 x 592 1 184 x 666 1316K 740 x 814 1579 x 888 65 98 131 164 196 229 262 295 327 393 458 524 589 655 720 786 145 x 82 217 x 122 290 x 163 362 x 204 435 x 245 507 x 285 580 x 326 652 x 367 725 x 408 870 x 489 1014 x 571 1 159 x 652 1304 x 734 1449 x 815 1594 x 897 1739 x 978 From base to top of image (cm) 125 167 209 251 292 334 376 418 501 585 668 752 836 919 1003
****** Page 23 ****** 13 • H7550BD/E155D/HE-815J/HIP1406/H7550BDz If the projector is 3 m from the screen, good image quality is possible for image sizes between 90″ and 118″ . Note: Remind as below figure, the space of 154 cm height is required when the projector is located at 3 m distance. Zoom Ratio: n Size Ofin Desired distance Minimum Screen Size (Min zoom) Desired From base to 118 Height: 118 cm c Height: 154 cm From base to top of image Maximum Screen Size (Max zoom) Distance Diagonal Diagonal (m) 1.5 2 2.5 3 3.5 4 4.5 5 6 7 8 9 10 11 12 (inch) W (cm)x H (cm) top of image (cm) 39 59 79 98 118 138 158 177 197 236 276 315 354 394 433 473 (inch) W (cm)x H (cm) 30 45 60 75 90 105 120 136 151 181 211 241 271 301 331 361 1.3 x 67 x 38 100 x 56 133 x 75 167 x 94 200K 113 233K 131 267 x 150 300K 169 333 x 188 400 x 225 467 x 263 533 x 300 600 x 338 667 x 375 733 x 413 800 x 450 39 59 79 98 118 137 157 177 196 236 275 314 354 393 432 471 87 x 49 130 x 73 174 x 98 217 x 122 261 x 147 304 x 171 348 x 196 391 x 220 435 x 245 522 x 293 609 x 342 696 x 391 783 x 440 870 x 489 957 x 538 1043 x 587 From base to top of image (cm) 51 77 103 128 154 180 205 231 257 308 360 411 462 514 565 616
****** Page 24 ****** 14 How to Get a Preferred Image Size by Adjusting Distance and Zoom The table below shows how to achieve a desired image size by adjusting either the position or the zoom ring. • H7550ST/E155S/HE-815ST/HIP1403/H7550STz/Z650/EG40S/HG-80ST/ QIP1504 To obtain an image size of 70″ , set the projector at a distance between 1.1 m and 1.2 m from the screen and adjust the zoom level accordingly. Desired image size Height 89 From base to top of image 1.2 m c Desired distance 1.0 1.2 1.3 1.5 Desired Image Size Diagonal (inch) D istance (m) Max zoom Min zoom 30 40 50 60 70 80 90 100 120 150 180 200 250 300 Zoom Ratio: 1.1 x W (cm) x H (cm) 66 x 37 89 x 50 111 x 62 133 x 75 155 x 87 177 x 100 199k 112 221 x 125 266 x 149 332k 187 398 x 224 443 x 249 553 x 311 664 x 374 0.6 0.8 0.9 1.1 1.2 1.4 1.5 1.8 2.3 2.7 3.1 3.8 4.6 0.5 0.7 0.8 2.0 2.5 3.0 3.4 4.2 Top (cm) From base to top of image 38 51 64 77 89 102 115 128 153 191 230 255 319 383
****** Page 25 ****** 15 • H7550BD/E155D/HE-815J/HIP1406/H7550BDz To obtain an image size of 70″ set the projector at a distance between 1.8 m and 2.3 m from the screen and adjust the zoom level accordingly. Desired Image Size Desired image size 2.3 m c Desired distance D istance (m) Diagonal (inch) 30 40 50 60 70 80 90 100 120 150 180 200 250 300 Zoom Ratio: W (cm) x H (cm) 66 x 37 89 x 50 111 x 62 133 x 75 155 x 87 177 x 100 199k 112 221 x 125 266 x 149 332k 187 398 x 224 443 x 249 553 x 311 664 x 374 Max zoom 1.0 1.3 1.5 1.8 2.0 2.3 2.5 3.1 3.8 4.6 5.1 6.4 7.6 Min zoom 1.0 1.3 1.7 2.0 2.3 2.7 3.0 3.3 4.0 5.0 6.0 6.6 8.3 Height: 92 cm From base to top Of image Top (cm) From base to top of image 39 52 65 78 92 105 118 131 157 196 235 262 327 392 1.3 x
****** Page 26 ****** 16 User Controls Installation Menu The Installation menu provides an Onscreen Display (OSD) for projector installation and maintenance. Use the OSD only when the message ‘INO signal” is displayed on the screen. 1 2 3 4 5 Turn on the projector by pressing d) (POWER) on the control panel or remote control. Press “MENU” on the control panel or remote control to launch the OSD for projector installation and maintenance. Aue The background pattern acts as a guide to adjusting the calibration and alignment settings, such as screen size and distance, focus and more. Note: The OSD screenshot is for reference only and may differ from the actual design. The Installation menu includes several options. Use the up and down arrow keys to select an option, the left and right arrow keys to adjust selected option settings, and the right arrow key to enter a submenu for feature setting. The new settings will be saved automatically upon exiting the menu. Press “MENU” anytime to exit the menu and return to the Acer welcome screen.
****** Page 27 ****** Onscreen Display (OSD) Menus The projector has multilingual Onscreen Display (OSD) menus that allow you to make image adjustments and change a variety of settings. Using the OSD menus To open the OSD menu, press ” MENU” on the control panel or remote control. When the OSD is displayed, use A v to select an item in the main menu. After selecting the desired main menu item, press to enter a submenu for feature setting Use A v to select the desired item and adjust the settings by using Select the next item to be adjusted in the submenu and adjust as described above. Press “MENU” on the control panel or remote control, the screen will return to the main menu. To exit the OSD menu, press i’ MENU” on the control panel or remote control again. It will close and the projector will automatically save the new settings. Main menu Submenu 50 Enter Bri#t press Off press Exit MEM-. Setting ABC Color Oisplay Mode Wall Color Brightness Contrast Saturation Tint Color Temperature Oynamic Black Advanced Select Note: Some of the following OSD settings may not be available. Please refer to the actual OSD of your projector.
****** Page 28 ****** 18 Color Display Mode Wall Color Brightness Contrast There are many factory presets optimized for various types of images. Bright: For brightness optimization. Standard: For common environment. sRGB: For ture-color optimization. Movie: For brighter and general movie/video/photo playing. Dark Cinema: For dark movie content. Game: For game content. Game Auto: For game content and automatically adjusts image contrast and saturation according to the displayed content. Dark FPS: For darker game content and brings out more details in the darker areas. Bright FPS: For brighter game content and increases image contrast and saturation. Sport: For sport picture. User: Memorize user’s settings. Use this function to choose a proper color according to the wall. There are several choices, including White, Light Yellow, Light Blue, Pink and Dark Green. It will compensate for the color deviation due to the wall color to show the correct image tone. Adjusts the brightness of the image. Press to darken the image. Press to lighten the image. Controls the degree of difference between the lightest and darkest parts of the picture. Adjusting the contrast changes the amount of black and white in the image. Press < to decrease the contrast. Press to increase the contrast. ****** Page 29 ****** Saturation Tint Color Temperature Dynamic Black Gamma 19 Adjusts a video image from black and white to fully saturated colors. to decrease the amount of color in the Press image. Press to increase the amount of color in the image. Adjusts the color balance of red and green. Press < to increase the amount of green in the image. Press to increase the amount of red in the image. Adjusts the color temperature. At higher color temperatures, the screen looks colder; at lower color temperatures, the screen looks warmer. If turned on, the projector dynamically adjusts the power consumption of the lamp according to the brightness of the image being projected. When projecting darker images the power consumption will be reduced and the contrast of the image will also be enhanced. Effects the representation of dark scenery. With greater gamma value, dark scenery will look brighter. ****** Page 30 ****** 20 Advanced Ind. Color Management: Adjusts the red, green, blue, cyan, yellow and magenta colors. Ind. Hue: Changes the hue of the color selected. – Ind. Saturation: Adjusts a video image from black and white to fully saturated color. – Ind. Gain: Adjusts the contrast levels. Brilliant Color: Produces an expanded on-screen color spectrum that delivers enhanced color saturation for bright, true-to-life images. This feature is "On" by default. White Peaking: Increases the brightness of whites that are near 100%. (Video sources only) Film Mode: Sets the image optimized to 24-frame True Film mode for more realistic cadence of film playback during motion sequences. Noise Reduction: Adjusts the level of noise reduction that helps to eliminate unwanted noise in the picture. Black Extension: Analyzes the current input image and calculates an offset value which is then added to the analog to digital converter black level value. This ensures optimum black level for each analog source. Note: "Saturation " and "Tint" functions are not supported under computer mode. ****** Page 31 ****** Image Projection Mode Projection Location Aspect Ratio Auto Keystone Manual Keystone 21 Front: The factory default setting Rear: Reverses the image so you can project from behind a translucent screen. Auto: Automatically adjusts projection location of image. Desktop Ceiling: Turns the image upside down for ceiling- mounted projection. Use this function to choose your desired aspect ratio. Auto: Keeps the image with original width-height ratio and maximizes the image to fit native horizontal or vertical pixels. Full: The image will be displayed making full use of the horizontal and vertical pixels. 4:3: The image will be scaled to fit the screen and displayed using a 4:3 ratio. 16:9: The image will be scaled to fit the screen and displayed using a 16:9 ratio. L.Box: Keeps the original signal aspect ratio and zooms in by 1.333 times. Automatically adjusts image distortion caused by tilting projection. Manually adjusts image distortion caused by tilting projection. This function is unavailable when Auto Keystone is set to "On". ****** Page 32 ****** 22 HN Keystone 4 Corner Correction Sharpness H. Position (Horizontal Position) V. Position (Vertical Position) Frequency V. Keystone: Manually adjusts image distortion caused by tilting projection (±30 degrees). H. Keystone: Manually adjusts image distortion caused by tilting projection (±30 degrees). Manually adjusts the shape and size of an image that is unevenly rectangular on all sides. Press "MODE" repeatedly to select the corner that you wish to adjust. Press four directional selection keys to adjust the image shape. Please adjust a-corner correction separately for each aspect ratio, and its memory is allowed to save 4 sets of settings only. Adjusts the sharpness of the image. Press Press Press Press Press Press to decrease the sharpness. to increase the sharpness. to move the image left. to move the image right to move the image down. to move the image up. Changes the projector's refresh rate to match the frequency of your comp uter's graphics card. If you experience a vertical flickering bar in the projected image, use this function to correct it. ****** Page 33 ****** Tracking HDMI Color Range HDMI Scan Info 23 Synchronizes the signal timing of the display with the graphics card. If you experience an unstable or flickering image, use this function to correct it. Adjusts the color range of the HDMI image data to prevent color display error. Auto: Automatically adjusts the color range by information from the player. Limited Range: Processes the input image as limited color range data. Full Range: Processes the input image as full color range data. Adjusts the over scan ratio of the HDMI image on screen. Auto: Automatically adjusts the overscan ratio by information from the player. Underscan: Always no overscan on the HDMI image. Overscan: Always keep overscan on the HDMI image. Note: "H. Position", "V. Position "Frequency" and "Tracking" functions are not supported under video mode. Note: "HDMI Color Range" and "HDMI Scan Info" are only available when the input signal is HDMI. Setting Startup Screen Use this function to select your desired startup screen. If you change the setting, it will take effect when you exit the OSD menu. Acer/Predator: The default startup screen of your Acer projector. User: Use the memorized picture from the "Screen Capture" function. ****** Page 34 ****** 24 Screen Capture Source Lock Closed Caption VGA OUT (Standby) Use this function to customize the startup screen. To capture the image that you want to use as the startup screen, follow the instructions below. Notice Before proceeding with the following steps, make sure that the "Keystone" is set to the default value and the "Aspect Ratio" is set to "4:30. For details, refer to the "Image" section. Change the i' Startup Screen" from the default setting to " User Select "Screen Capture" to customize the startup screen. A dialog box appears to confirm the action. Choose "Yes" to use the current image as your customized startup screen. Choose " No " to cancel the screen capture and exist the Onscreen Display (OSD). A message appears stating that the screen capture is in progress. When the screen capture is finished, the message disappears and the original display is shown. In the unlikely event that the capturing action fails, change the resolution of your target picture to 800 x 600. Selecting "On" enables the function and when switching input signals, you need to press "SOURCE" on the control panel or remote control, or the direct source key on the remote control. When this function is disabled, the projector will detect your source automatically. Selects a preferred closed captioning mode from CCI, CC2, CC3, CC4 (CCI displays captions in the primary language in your area). Select " Off" to turn off the captioning feature. This function is only available when a composite video or S- Video input signal is selected and its system format is NTSC. Selecting "On" enables the function. The projector can output a VGA signal when it is in standby mode and the VGA IN (or VGA IN 1) and VGA OUT sockets are correctly connected to the devices. Enabling this function slightly increases the standby power consumption. ****** Page 35 ****** DC SV Out (Standby) HDMI CEC (Internal) Reset Security 25 Selecting "On" enables the function. Both micro USB cable inside the projector and the DC 5V out port on the back of the projector can output 5V power when it is in standby mode. Enabling this function slightly increases the standby power consumption. Selecting "On" allows synchronized power ON/OFF operation between the projector and a CEC-compatible device connected to the HDMI/MHL port of the projector. This function is only available for the internal HDMI/ MHL port. Press after choosing "Yes" to return the display parameters on all menus to the factory default settings. Security This projector provides a useful security function for the administrator to manage the projector. Press to change the "Security" setting. If the security function is enabled, your must enter "Administrator Password" first before changing the security setting. The factory default of "Administrator Password" is 0000" . Select "On JJ to enable the security function. You have to enter password depending on the i' Security Mode" Please refer to "User Password" section for details. If "Off" is selected, you can switch on the projector without password. Timeout (Min.) Once "Security" is set to "On" , you can set timeout function. Press Control Panel,” and then double-click the “Display” icon. Select the “Settings” tab. Verify that your display resolution setting is lower than or equal to 1600 x 1200 or 1920 x 1080. Click the “Advanced Properties” button. If the problem still appears, change the mon itor display you are using and follow the steps below: Verify that the resolution setting is lower than or equal to 1600 x 1200 or 1920 x 1080. Click the “Change” button under the “Monitor” tab. Click “Show all devices > Standard mon itor types” under the SP box, and choose the resolution mode you need under the “Models” box. Verify that the resolution setting of the mon itor display is lower than or equal to 1600 x 1200 or 1920x 1080.
****** Page 42 ****** 30 3 4 5 6 7 Partial, scrolling or incorrectly displayed image (For notebooks) The screen of the notebook computer is not displaying your presentation Image is unstable or flickering Image has vertical flickering bar Image is out of focus Press “RESYNC” on the control panel or remote control. For an incorrectly displayed image: Follow the steps for item 2 (above) to adjust the resolution of your computer. Press the toggle output settings. Example: Compaq [Fn]+[F4], Dell [Fn]+[F8], Gateway IBM HP NEC Toshiba If you experience difficu Ity changing resolutions or your monitor freezes, restart all equipment including the projector. If you are using a Microsofte Windowse based notebook: Some notebook PCs may deactivate their own screens when a second display device is in use. Each has a different way to be reactivated. Refer to your computer’s manual for detailed information. If you are using an Apple@ Maco OS based notebook: In System Preferences, open Display and select Video Mirroring “On.” Use “Tracking” to correct it. Refer to the Image” section for more information. Change the display color setting on your computer. Use “Frequency” to make an adjustment. Refer to the “Image” section for more information. Check and reconfigure the display mode of your graphics card to make it compatible with the projector. Adjust the focus ring on the projector lens. Make sure the projection screen is within the required distance: H7550ST/E155S/HE-815ST/HIP1403/H7550STz/Z650/ EG40S/HG-80ST/Q IP 1504: 3.0 to 15.0 feet (0.9 to 4.6 meters) H7550BD/E 155D/HE-815J/H IP1406/H7550BDz: 3.3 to 25.1 feet (1.0 to 7.6 meters) Refer to the ” How to Get a Preferred Image Size by Adjusting Distance and Zoom” section for more information.
****** Page 43 ****** 8 9 10 11 Image is stretched when displaying a “widescreen ” DVD title Image is too small or too large Image has slanted sides Image is reversed 31 When you play a DVD encoded in anamorphic or 16:9 aspect ratio you may need to adjust the following settings: If you play a 4:3 format DVD title, please change the format to 4:3 with the projector OSD. If the image is still stretched, you will also need to adjust the aspect ratio. Set up the display format to 16:9 (wide) aspect ratio on your DVD player. Adjust the zoom lever on the top of the projector. Move the projector closer to or further from the screen. Press “MENU” on the control panel or remote control. Go to “Image” > “Aspect Ratio” and try different settings. If possible, reposition the projector so that it is centered on the screen and below the bottom of the screen. Press the Keystone correction keys on the control panel or remote control until the image becomes square. Press “MENU” on the control panel or remote control to open the OSD menu. Go to “Image” > “Auto Keystone” or “Image” > “Manual Keystone” to make adjustments. Select “Image” > “Projection Mode”, “Image” > “Projection Location ” on the OSD and adjust the projection direction. Problems with the Projector 2 Condition The projector stops responding to all controls Lamp burns out or makes a popping sound Solution If possible, turn off the projector, then unplug the power cord and wait at least 30 seconds before reconnecting power. When the lamp reaches the end of its useful life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn on until the lamp module has been replaced. To replace the lamp, follow the procedures in the “Replacing the Lamp” section.
****** Page 44 ****** 32 OSD Messages Condition Message Message Reminder Fan Fail – the system fan is not working. Fan Fail. Lamp will automatically turn off soon. Projector Overheated – the projector has exceeded its recommended operating temperature and must be allowed to cool down before it is used. Please also check the dust filters if they are installed. If the dust filter is clogged with dust, please clean it. Projector Overheated. Lamp will automatically turn off soon. Replace the lamp – the lamp is about to reach its maximum lifetime. Prepare to replace it soon. Lamp is approaching the end of its useful life in full power operation. Replacement suggested!
****** Page 45 ****** LED & Alarm Definition Listing LED Messages Message Standby (Power cord plugged in) Power on Lamp retry Turning off (Cooling state) Turning off (Cooling completed) Error (Thermal failure) Error (Fan lock failure) Error (Lamp breakdown) Error (Color wheel failure) Power LED Red Quick flash ing Blue Qu ick flashing LAMP LED Red Quick flashing 33 TEMP LED Red Quick flashing
****** Page 46 ****** 34 Using the inner connector(s) Turn the projector off by pressing C) (POWER). Allow the projector at least 45 minutes to cool down. Disconnect the power cord. 1 2 3 4 5 6 Use a screwdriver to remove the screw(s) from the cover. (Illustration #1) Push up and remove the cover. (Illustration #2) Locate the HDMI (MHL) connector beside the focus/zoom ring Put the bottom of the WirelessHD dongle (optional accessory) or other HDMI/MHL dongle into the projector first (Illustration #3) and then insert the WirelessHD dongle or other HDMI/MHL dongle into the HDMI (MHL) connector. (Illustration #4) A micro USB cable is also available if you need to power the HDMI/MHL dongle. Replace the cover and tighten the screw(s). (Illustration #5 – #6)
****** Page 47 ****** 35 Replacing the Lamp Use a screwdriver to remove the screw(s) from the cover, and then pull out the The projector will detect the lamp life itself. It will show you a warning message “Lamp is approaching the end of its useful life in full power operation. Replacement Suggested! ” When you see this message, change the lamp as soon as possible. Make sure the projector has been cooled down for at least 45 minutes before changing the lamp. Warning: Lamp compartment is hot! Allow it to cool down before changing lamp! 3 4 10 1 To remove the lamp: Turn the projector off by pressing C) (POWER). Allow the projector at least 45 minutes to cool down. Disconnect the power cord. 1 2 3 4 5 Use a screwdriver to remove the screw(s) from the cover. (Illustration #1) Push up and remove the cover. Remove the lamp protection film (Illustration #2). Remove the screw that secures the lamp module (Illustration #3). Disconnect the lamp connector from the projector. Lift the handle so that it stands up. Pull out the lamp module by force (Illustration #4). To replace the lamp module, use a new lamp and reverse the above steps (Illustrations #0 – #0). Warning: To reduce the risk of personal injury, do not drop the lamp module or touch the lamp bulb. The bulb may shatter and cause injury if it is dropped.
****** Page 48 ****** 36 Ceiling Mount Installation If you wish to install the projector using a ceiling mount, please refer to the steps below: 1 Drill four holes into a solid, structurally sound part of the ceiling, and secure the mount base. Note: Screws are not included. Please obtain the appropriate screws for your type of ceiling Secure the ceiling rod using the appropriate type of cylinder screws. Short Rod Screv.’ Type A 50 mm length / 8 mm diameter Ceiling Mount Base – Attach to ceiling Long Rod Extension Rod Large Cylinder Cap Allen Key – For tighten/loosen Tightening Screw’ Medium Rod
****** Page 49 ****** 37 Use the appropriate number of screws for the projector size to attach the projector to the ceiling mount bracket. 3 4 Screw,’ Type B Large Washer Smaller Washer Projector Bracket Supports projector and allows for adjustments Spacer – For heat dissipation C). Note: It is recommended that you keep a reasonable space between the bracket and the projector to allow for proper heat distribution. Use two washers for extra support, if deemed necessary. Attach the ceiling bracket to the ceiling rod. Tightening Screw Large Cylinder Cap Allen Key – For tighten/oosen Screw’ Type A 50 mm length – mm diameter o
****** Page 50 ****** 38 5 Adjust the angle and positioning as necessary. Tightening Screw Allen Key 360′ Allen Key Tightening Screw Note: The appropriate type of screw and washer for each model is listed in the table below. 4 mm diameter screws are enclosed in the screw pack. Screw Type B Diameter (mm) Washer Type Length (mm) 25 137 mm 153.31 mm Large 16.3 mm Small
****** Page 51 ****** 39 Specifications The specifications below are subject to change without notice. For final specs, please refer to Acer’s marketing documentation. Projection system Resolution Computer compatibility Video compatibility Aspect ratio D isplayable colors Projection lens Projection screen size (diagonal) with clear focus Projection distance with clear focus Throw ratio Horizontal scan rate Vertical refresh scan rate Keystone correction Digital zoom Audio Weight Dimensions (W x D x H) Power supply Power consumption (typical) Operating temperature DLPTM Native: 1080p (1920 x 1080) Maximum: WUXGA (1920 x 1200) (supports reduce blanking only) Refer to the “Compatibility Modes” section for more information. NTSC (3.58/4.43), PAL (MIN), PAL 60, SECAM, HDTV (720p, 1080i, 1080p), EDTV (480p, 576p), SDTV (480i, 576i) Auto, 4:3, 16:9, Full, Letter Box (L BOX), 16:6 1.07 billion colors H7550ST/E155S/HE-815ST/HIP1403/H7550STz/ Z650/EG40S/HG-80ST/QIP 1504 • F = 2.6-2.78, f = 10.20 mm – 11.22 mm, 1:1.1 Manual Zoom and Manual Focus H7550BD/E155D/HE-815J/HIP1406/H7550BDz: F = 2.59 – 2.87, f = 16.88 mm – 21.88 mm, 1:13 Manual Zoom and Manual Focus H7550ST/E155S/HE-815ST/HIP1403/H7550STz/ Z650/EG40S/HG-80ST/QIP 1504 • 54″ (137 cm) – 300″ (762 cm) H7550BD/E IP1406/H7550BDz: 30″ (76 cm) – 300″ (762 cm) H7550ST/E155S/HE-815ST/HIP1403/H7550STz/ Z650/EG40S/HG-80ST/Q 1504 • 3.0′ (0.9 m) – 15.01 (4.6 m) H7550BD/E155D/HE-815J/HIP1406/H7550BDz: 3.3′ (1.0 m) – 25.11 (7.6 m) H7550ST/E IP1403/H7550STz/ Z650/EG40S/HG-80ST/QIP1504• 131 ‘1±30/0 @ 2 m (0.69 – 0.76:1) – 1.50:1) 15 – 100 KHz 24 – 120 Hz +1-30 Degrees (Vertical and horizontal), Manual & Auto +1-40 Degrees low x 2 Approximate 3.5 kg (7.71 lbs.) 357 x 241 x 98 mm (1.17′ x 0.79′ x 0.32’) Universal AC input 100 – 240 V, input frequency 50/60 Hz 325 w OOC to / to 1040F
****** Page 52 ****** 40 1/0 connectors Standard package contents Accessory (optional) Power socket x 1 USB x 1 (Type mini B) VGA input x 1 VGA output x 1 Composite video x 1 S-Video x 1 Component Video (Y/Cb/Cr, Y/Pb/Pr) x 1 RS232x 1 HDMI (MHL) x 2 HDMI x 1 DC 5V out x 1 3.5 mm audio jack input x 1 3.5 mm audio jack output x 1 Micro USB cable x 1 AC power cord x 1 VGA cable x 1 Remote control x 1 Battery x 2 (for the remote control) User’s guide (CD-ROM) x 1 Quick start guide x 1 Security card x 1 Composite video cable x 1 Carrying case x 1 3D glasses kit x 1 * Design and specifications are subject to change without notice.
****** Page 53 ****** Compatibility Modes 1 VGA Analog – PC Signal 75.00 65.32 75.00 31.50 35.00 37.88 Mode VGA SVGA XGA SXGA QuadVGA SXGA+ UXGA PowerBook G4 Resolution 640 x 480 800 x 600 1024 x 768 1 152 x 864 1280 x 1024 1280 x 960 1280 x 960 1400 x 1050 1600 x 1200 640 x 480 640 x 480 800 x 600 1024 x 768 1024 x 768 1152 x 870 V.Frequency [Hz] 60 72 75 85 120 56 60 72 75 85 120 60 70 75 85 120 70 75 85 60 72 75 85 60 75 60 60 60 66.6 (67) 60 60 75 75 41 H.Frequency [KHz] 31.47 37.86 37.50 43.27 61.91 35.20 37.88 48.08 46.88 53.67 77.43 48.36 56.48 60.02 68.68 98.96 63.85 67.50 77.10 63.98 76.97 79.98 91.15 60.00 48.36 60.241 68.681
****** Page 54 ****** 42 2 WXGA HDMI – PC Signal Mode VGA 60 VGA 72 VGA 75 VGA 85 VGA 120 SVGA 56 SVGA 60 SVGA 72 SVGA 75 SVGA 85 SVGA 120 XGA 60 XGA 70 XGA 75 XGA 120 SXGA 75 SXGA 85 SXGA 60 SXGA 72 SXGA 75 SXGA 85 QuadVGA_75 1280 x 768 1280 x 768 1280 x 768 1280 x 720 1280 x 800 1280 x 800 – RB 1440 x 900 1680 x 1050 1366 x 768 1920 x 1080-RB 1920 x 1080-EIA 1024 x 600 1920 x 1200-RB Resolution 640 x 480 800 x 600 1024 x 768 1152 x 864 1280 x 1024 1280 x 960 60 75 85 60 60 120 60 60 60 60 60 60 59.95 V.Frequency [Hz] 59.94 72.809 75 85.008 119.518 56.25 60.317 72.188 75 85.061 1 19.854 60.004 70.069 75.029 119.804 75 84.99 60.02 72 75.025 85.024 75 47.78 60.29 68.63 45.00 49.70 101.6 55.94 65.29 47.71 66.60 67.50 37.50 74.04 H.Frequency [KHzl 31.469 37.861 37.5 43.269 61.91 35.156 37.879 48.077 46.875 53.674 77.425 48.363 56.476 60.023 98.958 67.5 77.094 63.981 76.97 79.976 91.146 75
****** Page 55 ****** SXGA+ 60 UXGA 60 Mac GA MAC13 Mac G4 Mac GA MAC19 MAC21 WXGA 60 WXGA 75 WXGA 85 WXGA 60 WXGA 60 WXGA 120-RB WXGA+ 60 1680×1050 60 acer 16:9 1920x 1080 RB 1920 x 1080 ElA acer_timing 1920 x 1200-RB HDMI – Video Signal 1400 x 1050 1600 x 1200 640 x 480@60Hz 640 x 480@67Hz 800 x 600@60Hz 1024 x 768@60Hz 1024 x 768@75Hz 1152 x 870@75Hz 1280 x 768 1280 x 720 1280 x 800 1280 x 800 1440 x 900 1680 x 1050 1366 x 768 1920 x1080 1920 x1080 1024 x 600 1920 x 1200 59.978 60 59.94 66.667 60.317 60.004 75.02 75.061 59.87 74.893 84.837 60 59.81 119.909 59.887 59.954 59.79 60 60 60 59.95 43 65.317 75 31.469 35 37.879 48.363 60.241 68.681 47776 60.289 68.633 45 49.702 101.563 55.935 65.29 47.712 66.587 67.5 37.5 74.038 3 15.73 31 47 15.63 31.25 45.00 37.50 33.75 28.13 67.50 56.26 27.00 26.97 Mode 480i 480p 576i 576p 720p 720p 1080i 1080i 1080p 1080p 1080p 1080p Resolution 720 x 480 (1440 x 480) 720 x 480 720 x 576 (1440 x 576) 720 x 576 1280 x 720 1280 x 720 1920 x 1080 1920 x 1080 1920 x 1080 1920 x 1080 1920 x 1080 1920 x 1080 V.Frequency [Hz] 60 60 50 50 60 50 60 50 60 50 24 23.98 H.Frequency [KHz]
****** Page 56 ****** 44 MHL – Video Signal 4 31.25 45.00 37.50 33.75 28.13 27.00 26.97 33.75 5 6 Mode 480i 480p 576i 576p 720p 720p 1080i 1080i 1080p 1080p 1080p YPbPr Signal Mode 480i 480p 576i 576p 720p 720p 1080i 1080i 1080p 1080p 1080p 1080p Mode NTSC PAL Resolution 720 x 480 (1440 x 480) 720 x 480 720 x 576 (1440 x 576) 720 x 576 1280 x 720 1280 x 720 1920 x 1080 1920 x 1080 1920 x 1080 1920 x 1080 1920 x 1080 Resolution 720 x 480 720 x 480 720 x 576 720 x 576 1280 x 720 1280 x 720 1920 x 1080 1920 x 1080 1920 x 1080 1920 x 1080 1920 x 1080 1920 x 1080 Video, S-Video Signal SECAM PAL-M PAL-N PAL-60 NTSC4.43 V.Frequency [Hz] 15.73 15.63 15.63 15.73 15.63 15.73 15.73 V.Frequency [Hz] 60 60 50 50 60 50 60 50 24 23.98 30 V.Frequency [Hz] 59.94 59.94 50.00 50.00 60.00 50.00 60.00 50.00 60.00 50.00 24.00 23.98 H.Frequency [KHz] 60 50 50 60 50 60 60 H.Frequency [KHz] 15.73 31.47 15.63 H.Frequency [KHz] 15.73 31.47 15.63 31.25 45.00 37.50 33.75 28.13 67.5 56.26 27.00 26.97 fsc (MHz) 3.58 4.43 4.25 or 4.41 3.58 3.58 4.43 4.43
****** Page 57 ****** 45 Regulations and safety notices FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the device and receiver. Connect the device into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/television technician for help. Notice: Shielded cables All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations. Notice: Peripheral devices Only peripherals (input/output devices, terminals, printers, etc.) certified to comply with the Class B limits may be attached to this equipment. Operation with non-certified peripherals is likely to result in interference to radio and TV reception. Caution Changes or modifications not expressly approved by the manufacturer could void the user Js authority, which is granted by the Federal Communications Commission, to operate this device. Operation conditions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, incl uding interference that may cause undesired operation. Notice: Canadian users This Class B digital apparatus complies with Canadian ICES-003.
****** Page 58 ****** 46 Remarque “intention des utilisateurs canadiens Cet appareil numérique de la classe B est conforme a la norme NMB-003 du Canada. Declaration of Conformity for EU countries Acer hereby, declares that this projector series is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Compliant with Russian regulatory certification 001 Radio device regulatory notice Note: The regulatory information below is for models with wireless LAN and/or Bluetooth only. General This product complies with the radio frequency and safety standards of any country or region in which it has been approved for wireless use. Depending on configurations, this product may or may not contain wireless radio devices (such as wireless LAN and/or Bluetooth modules). Canada — Low-power license-exempt radio communication devices (RSS-247) a b Common information Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device. Operation in 2.4 GHz band To prevent radio interference to the licensed service, this device is intended to be operated indoors and installation outdoors is subject to licensing.
****** Page 59 ****** 47 List of applicable countries Th is device must be used in strict accordance with the regu lations and constraints in the country of use. For further information, please contact a local office in the country of use. Please see ec.europa.eu/enterprise/rtte/implem.htm for the latest country list. FCC RF Radiation Exposure Statement 1 2 This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Le présent appareil est conforme aux CNR d’lndustrie Canada applicables auxappareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suiva ntes: 1 2 l’appareil ne doit pas produire de brouillage, et l’ utilisateur de IJappareil doit accepter tout brouillage adioélectrique subi, méme si le brouillage est susceptible d’en compromettre le fonctionnement. Caution: Exposure to Radio Frequency Radiation. To comply with RSS 102 RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons. Pour se conformer aux exigences de conformité CNR 102 RF exposition, une distance de séparation d’au moins 20 cm doit étre maintenue entre llantenne de cet appareil et toutes les personnes.
****** Page 60 ****** 48 Acer Incorporated acer Acer Incorporated 8K 88, Sec. 1, Xintai 5th Rd., Xizhi New Taipei City 221 Taiwan Declaration of Conformity 8F, 88, sec. 1, Xintai 5th Rd., Xizhi, New Taipei City 221, Taiwan Contact Person: Mr. RU Jan, E-mail: email@example.com And, Acer Italy s.r.l. Via Lepetit, 40, 20020 Lainate (MI) Italy Tel: +39-02-939-921 ,Fax: +39-02 9399-2913 acer.it Product: Trade Name: Model Number: DLP Projector Acer K650i/H7550ST/Z650/H7550STz We, Acer Incorporated, hereby declare under our sole responsibility that the product described above is in con- formity with the relevant Union harmonization legislations: Directive 2014/53/EU on Radio Equipment, RoHS Directive 2011/65/EU and Erp Directive 2009/125/EC. The following harmonized standards and/or other rele- vant standards have been applied: Electromagnetic compatibility X EN ClassB EN 61000-3-2:2014 Class D E EN 61000-3-3:2013 Radio frequency spectrum usage EN 300 328 V2.1.1 Healthy and safety EN RoHS EN 50581:2012 EN 301 489-1 V2.1.1 EN 301 489-17 v3.1.1 BEN 62311:2008 Regulation (EC) No. 1275/ 2008; EN 50564:2011 Regulation (EC) No. 278/2009; EN 50563:2011 Operation frequency and radio-frequency power are listed as below: Bluetooth: 2402-2480MHz < 10 dBm Year to begin affixing CE marking: 2017. RU Jan / Sr. Manager Acer Incorporated (Taipei, Taiwan) Jun. 26 2017 Date ****** Page 61 ****** 49 acer Acer America Corporation 333 West San Carlos St., Suite 1500 San Jose, CA 95110 Tel: 254-298-4000 Fax: 254-298-4147 wv:w.acer.com Federal Communications Commission Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (I) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The following local Manufacturer /lmporter is responsible for this declaration: Product: Model Number: Name of Responsible Pamty• Address of Responsible Party: Contact Person: Phone No.. Fax No.. DLP Projector HIP1403/HIP1406/QIP1504 series Acer America Corporation 333 West San Carlos St. Suite 1500 San Jose, CA 95110 Acer Representative 254-298-4000 254-298-4147
FREE ENGLISH PDF
USER GUIDE – USER MANUAL
OWNER GUIDE – OWNER MANUAL
REFERENCE GUIDE – REFERENCE MANUAL
INSTRUCTION GUIDE – INSTRUCTION MANUAL