Post questions, comments, reviews or page errors in the comment box below.

Click here to download ACER HE-711J (01) PDF MANUAL


PDF Content Summary:

****** Page 1 ****** Acer Projector H5370BD/E131 IJ Series User’s Guide

****** Page 2 ****** Copyright 0 2012. Acer Incorporated. All Rights Reserved. Acer Projector H5370BD/E 13 ID/HE-71 IJ Series User’s Guide Original Issue: 12/2012 Changes may be made periodically to the information in this publication without obligation to notify any person of such revisions or changes. Such changes will be incorporated in new editions of this manual or supplementary documents and publications. This company makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims the implied warranties of merchantability or fitness for a particular purpose. Record the model number, serial number, purchase date and place of purchase information in the space provided below. The serial number and model number are recorded on the label affixed to your projector. All correspondence concern ing your unit should include the serial number, model number and purchase information. No part of this publication may be reproduced, stored in a retrieval system, or transm itted, in any form or by any means, electron ically, mechan ically, by photocopy, recording or otherwise, without the prior written permission of Acer Incorporated. Acer Projector H5370BD/E 13 ID/HE-71 IJ Series Model number: Serial number: Date of purchase: Place of purchase: Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies’ product names or trademarks are used herein for identification purposes only and belong to their respective companies. HDMITM, the HDMI logo and High-Definitlon Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. “

****** Page 3 ****** ili Information for your safety and comfort Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. Turning the product off before cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. Caution for plug as disconnecting device Observe the following guidelines when connecting and disconnecting power to the external power supply unit: Install the power supply unit before connecting the power cord to the AC power outlet. Unplug the power cord before removing the power supply unit from the projector. If the system has multiple sources of power, disconnect power from the system by unplugging all power cords from the power supplies. Caution for Accessibility Be sure that the power outlet you plug the power cord into is easily accessible and located as close to the equipment operator as possible. When you need to disconnect power to the equipment, be sure to unplug the power cord from the electrical outlet. Warnings! Do not use this product near water. Do not place this product on an unstable cart, stand or table. If the product falls, it could be seriously damaged Slots and openings are provided for ventilation to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should never be placed near or over a radiator or heat register, or in a built-in installation unless proper ventilation is provided. Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind onto or into the product.

****** Page 4 ****** To avoid damage of internal components and to prevent battery leakage, do not place the product on a vibrating surface. Never use it under sporting, exercising, or any vibrating environment which will probably cause unexpected short current or damage rotor devices, lamp. Using electrical power This product should be operated from the type of power indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company. Do not allow anything to rest on the power cord. Do not locate this product where people will walk on the cord. If an extension cord is used with this product, make sure that the total ampere rating of the equipment plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure that the total rating of all products plugged into the wall outlet does not exceed the fuse rating Do not overload a power outlet, strip or receptacle by plugging in too many devices. The overall system load must not exceed 80% of the branch circuit rating. If power strips are used, the load should not exceed 80% of the power strip’s input rating. This product’s AC adapter is equipped with a three-wire grounded plug. The plug only fits in a grounded power outlet. Make sure the power outlet is properly grounded before inserting the AC adapter plug. Do not insert the plug into a non-grounded power outlet. Contact your electrician for details. Warning! The grounding pin is a safety feature. Using a power outlet that is not properly grounded may result in electric shock and/or injury. Note: The grounding pin also provides good protection from unexpected noise produced by other nearby electrical devices that may interfere with the performance of this product. Use the product only with the supplied power supply cord set. If you need to replace the power cord set, make sure that the new power cord meets the following requirements: detachable type, UL listed/CSA certified, VDE approved or its equivalent, 4.5 meters (15 feet) maximum length.

****** Page 5 ****** Product servicing Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel Unplug this product from the wall outlet and refer servicing to qualified service personnel when: the power cord or plug is damaged, cut or frayed liquid was spilled into the product the product was exposed to rain or water the product has been dropped or the case has been damaged the product exhibits a distinct change in performance, indicating a need for service the product does not operate normally after following the operating instructions Note: Adjust only those controls that are covered by the operating instructions, since improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal condition. Warning! For safety reasons, do not use non-compliant parts when adding or changing components. Consult your reseller for purchase options. Your device and its enhancements may contain small parts. Keep them out of the reach of small children. Additional safety information Do not look into the projector’s lens when the lamp is on. The bright may hurt your eyes. Turn on the projector first and then signal sources Do not place the product in following environments: Space that is poorly ventilated or confined. At least 50cm clearance from walls and free flow of air around the projector is necessary. Locations where temperatures may become excessively high, such as inside of a car with all windows rolled up. Locations where excessive humidity, dust, or cigarette smoke may contaminate optical components, shorten ing the life span and darkening the image. Locations near fire alarms. Locations with an ambient temperature above 40 00104 OF. Locations where the altitudes are higher than 10000 feet. Unplug immediately if there is something wrong with your projector. Do not operate if smoke, strange noise or odor comes out of your projector. It

****** Page 6 ****** might cause fire or electric shock. In this case, unplug immediately and contact your dealer. Do not keep using this product to break or drop it. In this case contact your dealer for inspection. Do not face the projector lens to the sun. It can lead to fire. When switching the projector off, suggest to ensure the projector completes its cooling cycle before disconnecting power. Do not frequently turn off the main power abruptly or unplug the projector during operation. The best way is to wait for the fan to turn off before turning main power off. Do not touch air outlet grille and bottom plate which becomes hot. Clean the air filter frequently if have. The temperature inside may rise and cause damage when the filter/ventilation slots clogged with dirt or dust. Do not look into the air outlet grille when projector is operating. It may hurt your eyes. Always open the lens shutter or remove the lens cap when the projector is on. Do not block the projector lens with any object when the projector is under operation as this could cause the object to become heated and deformed or even cause a fire. To temporarily turn off the lamp, press HIDE on the remote control. The lamp becomes extremely hot during operation. Allow the projector to cool for approximately 45 minutes prior to removing the lamp assembly for replacement. Do not operate lamps beyond the rated lamp life. It could cause it to break on rare occasions. Never replace the lamp assembly or any electronic components unless the projector is unplugged. The product will detect the life of the lamp itself. Please be sure to change the lamp when is showing warning message. When changing the lamp, please allow unit to cool down, and follow all changing instructions. Reset the i’ Lamp Hour Reset” function from the Onscreen display “Management” menu after replacing the lamp module. Do not attempt to disassemble this projector. There are dangerous high voltages inside which may hurt you. The only user serviceable part is the lamp which has its own removable cover. Refer servicing only to suitable qualified professional service personnel. Do not stand the projector on end vertically. It may cause the projector to fall over, causing injury or damage. This product is capable of displaying inverted images for ceiling mount installation. Only use acer ceiling mount kit for mounting the projector and ensure it is securely installed.

****** Page 7 ****** Vli Caution for Listening To protect your hearing, follow these instructions. Increase the volume gradually until you can hear clearly and comfortably. Do not increase the volume level after your ears have adjusted. Do not listen to music at high volumes for extended periods. Do not increase the volume to block out noisy surroundings. Decrease the volume if you can’t hear people speaking near you. Disposal instructions Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle. For more information on the Waste from Electrical and Electronics Equipment (WEEE) regulations, visit acer-group.com/public/ Sustainability/sustainability01. htm Mercury advisory For projectors or electronic products containing an LCD/CRT monitor or display: “Lamp(s) contain Mercury, Lamp(s) inside this product contain mercury and must be recycled or disposed of according to local, state or federal laws. For more information, contact the Electronic Industries Alliance at eiae.org. For lamp-specific disposal information, check lamprecycle.org

****** Page 8 ****** VIII First things first Usage Notes Turn off the product before cleaning Use a soft cloth moistened with mild detergent to clean the display housing. Disconnect the power plug from AC outlet if the product is not being used for a long period of time. Don’t: Block the slots and openings on the unit provided for ventilation. Use abrasive cleaners, waxes or solvents to clean the unit. Use under the following conditions: In extremely hot, cold or humid environments. In areas susceptible to excessive dust and dirt Near any appliance that generates a strong magnetic field. Place In direct sunlight. Precautions Follow all warnings, precautions and maintenance as recommended in this user’s guide to maximize the life of your unit. Warning: Do not look into the projector’s lens when the lamp is on. The bright light may hurt your eyes. To reduce the risk of fire or electric shock, do not expose th is product to rain or moisture. Please do not open or disassemble the product as th is may cause electric shock. When changing the lamp, please allow unit to cool down, and follow all changing instructions. This product will detect the life of the lamp itself. Please be sure to change the lamp when it shows warning messages. Reset the “Lamp Hour Reset” function from the Onscreen display ” Management” menu after replacing the lamp module. When switch ing the projector off, please ensure the projector completes its cooling cycle before disconnecting power. Turn on the projector first and then the signal sources. Do not use lens cap when projector is in operation. When the lamp reaches the end of its life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn back on until the lamp module has been replaced. To replace the lamp, follow the procedures listed under “Replacing the Lamp”

****** Page 9 ****** Information for your safety and comfort First things first Usage Notes Precautions Introduction Product Features Package Overview Projector Overview Projector Outlook Control Panel Remote Control Layout MHL (Mobile High-Definition Link) Control Getting Started Connecting the Projector Turning the Projector On/Off Turning on the Projector Turning the projector off Adjusting the Projected Image Adjusting the Height of Projected Image How to optimize image size and distance How to get a preferred image size by adjusting distance and zoom User Controls Installation menu Acer Empowering Technology Onscreen Display (OSD) Menus Color Image Setting Management Audio Language iii viii VIII VIII 1 1 2 3 3 4 5 7 8 8 10 10 11 12 12 13 15 17 17 18 19 20 22 24 26 27 27 29

****** Page 10 ****** Appendices Troubleshooting LED & Alarm Definition Listing Cleaning and replacing the dust filters Replacing the Lamp Ceiling Mount Installation Specifications Compatibility modes Regulations and safety notices 30 30 35 36 37 39 42 44 49

****** Page 11 ****** 1 Introduction Product Features This product is a single-chip DLP@ projector. Outstanding features include: DLP@ technology 1280 x 720 720P resolution 4:3 / 16:9 / L.Box aspect ratio supported Enables projecting 3D content via DLP Link Technology: Blue-Ray 3D supported and Nvidia 3DTV Play Ready Enrich 3D experience for 2D contents via 2D to 3D convert function Acer ColorBoost technology delivers nature’s true colors for vivid, life-like images High brightness and contrast ratio Versatile display modes (Bright, Presentation, Standard, Video, Picture, Game, Education, User) enable optimum performance in any situation NTSC / PAL / SECAM compatible and HDTV (720p, 1080i, 1080p) supported Top-loading lamp design allows easy lamp replacement Lower power consumption and economy (ECO) mode extends lamp life Acer EcoProjeciton Technology delivers Intelligent power management approach and physical efficiency improvement Empowering Key reveals Acer Empowering Technology utilities (Acer eView, eTimer, ePower, e3D Management) for easy adjustment of settings Equipped with HDMITM & MHL connection supporting HDCP Advanced digital keystone correction optimizes presentations Multi-language onscreen display (OSD) menus Full-function remote control Manual focus projection lens zooms up to 1. lx 2x digital zoom and pan function Microsoft@ Windows@ 2000, XP, Vista@, Windows 7, Macintosh compliant @ os

****** Page 12 ****** 2 Package Overview This projector comes with all the items shown below. Check to make sure your unit is complete. Contact your dealer immediately if any thing is missing. Projector Acer Projector Security Card Security card Projector Quick Start Guide Dust Filters (Optional) Power cord 2 x Batteries User’s Guide (CD-ROM) MHL cable (Optional) VGA cable Carrying case öööö Remote control

****** Page 13 ****** Projector Overview Projector Outlook Front / upper side 6 7 escnptlon 5 1 2 3 4 Power button Control panel Zoom lever Focus ring 3 4 8 5 6 7 8 7 3 2 escriptlon Zoom lens Remote control receiver Tilt adjusting wheels Security bar Rear side 1 2 10 3 4 SMOEO . 8 9 12 11 12 Note: Connector interface is subject to model’s specifications. 1 2 3 4 5 6 Description USB ctrl connector HDMI 2/MHL connector HDMI 1 connector S-Video input connector YPbPrNCbCr input connector Composite video input connector 7 8 9 10 11 12 Description PC analog signal/HDTV/component video input connector RS232 connector Audio input connector Power socket KensingtonTM lock port Dust filter inlets

****** Page 14 ****** 4 Control Panel -10 1 POWER RESYNG. (l) 8 4 9 6 2 LAMP MENU’ 3 TEMP SOURCE Icon 5 7 Description 1 2 3 4 5 6 7 8 9 10 A Function POWER LAMP TEMP RESYNC SOURCE POWER Empowering key MENU Power Indicator LED Lamp Indicator LED Temp Indicator LED Automatically synchronizes the projector to the input source. Changes the active source. See the contents in “Turning the Projector On/Off’ section. Unique Acer functions: e3D, eView, eTimer, ePower Management. Press “MENU ” to launch the Onscreen display (OSD) menu, back to the previous step for the OSD menu operation or exit the OSD menu. Confirm your selection of items. Four directional select Use to select items or make keys Keystone adjustments to your selection. Adjusts the image to compensate for distortion caused by tilting the projector (± 40 degrees).

****** Page 15 ****** Remote Control Layout ASPECT VGA 7 use A FREEZE RESYNC Mute MENU Model No:É-2E011 Rating : DC 3V — 60mA MAX. MADE IN CHINA vzucaaonol Icon Function 1 2 5 7 9 11 13. 14 15 16 20 22 24 26 ENTER 5 aACK 6 UT VIDEO HIDE SOURCE USB Description 5 3 4 6 8 10 12 17 19 18 21 23 25 section. 2 3 4 5 6 7 8 9 10 12 Infrared transmitter POWER HIDE ASPECT RATIO SOURCE RESYNC MUTE ZOOM Empowering key MENU KEYSTONE Sends signals to the projector. Refer to the “Turning the Projector On/Off” Press “3D” to select 3D models. Momentarily turns off the video. Press “HIDE” to hide the image, press again to display the image. To choose the desired aspect ratio (Auto, 4:3, 16:9, L.Box). Changes the active source. Automatically synchronizes the projector to the input source. To turn on/off the volume. Zooms the projector display in or out. Unique Acer functions: e3D, eView, eTimer, ePower Management. Press “MENU” to launch the Onscreen display (OSD) menu, back to the previous step for the OSD menu operation or exit the OSD menu. Confirm your selection of items. Adjusts the image to compensate for distortion caused by tilting the projector (± 40 degrees).

****** Page 16 ****** 6 13 14 15 16 17 18 19 20 21 22 23 24 Icon ENTER BACK Function Four directional select keys Pre./ Rewind Enter/ Play/ Pause Back/Stop Next/Fast forward KeyPad 0-9 00 PgUp/PgDn COMPONENT VIDEO VGA S-VIDEO SD/USB A USB B HDMI/DVI LANANiFi Description Use up, down, left, right buttons to select items or make adjustments to your selection. No function. No function. No function. No function. Press “0-9” to input a password in the “Security settings” . For computer mode on ly. Use this button to select the next or previous page. This function is only available when USB Ctrl connector(USB type B) is connected to a computer via a USB cable. Press “COMPONENT” to change source to Component video. Th is connection supports YPbPr (480pß76p/720p/1080p) and YCbCr (480i/576i/1080i). To change source to COMPOSITE VIDEO. Press “VGA” to change source to the VGA connector. This connector supports analog RGB, YPbPr (480pß76p/720p/ 1080i), YCbCr (480i/576i) and RGBsync. To change source to S-Video. No function. No function. To change source to HDMITM or MHL (HDMI 2/MHL connector on ly). (no DVI function) No function.

****** Page 17 ****** 7 MHL (Mobile High-Definition Link) Control POWER ASPECr 6 HIIOE SOURCE MHL control Mode Navigation 2 4 6 7 9 11 2 3 4 5 6 7 8 9 10 12 MUTZ 1 5 8 10 12 Resync Resync Resync Next Mode Ehit MHL Control MHL control Mode Multi.Media Next Mode e MHL Control MHL Control Mode Numeric Next Mode escrip Ion Exit Corgrol g•ck ÖÖåÉ VGA VOCO S-V•OCO con A ENTER BACK 00 omponen MUTE RESYNC MENU Volume Down/ Volume Up Direction Keys Play/Pause Select Exit Backward Forward KeyPad 0-9 PgUp/PgDn Long pressing to trigger the MHL control mode. To turn on/off the volume. Press to select the three MHL control modes. (Navigation/ Multi-Media/Numeric) Press to launch the root memu. (only for Navigation mode) Decreases/lncreases the volume. (only for Multi-Media mode) Use up, down, left, right buttons to select items or make adjustments to your selection. (only for Navigation mode) Toggles between playback and pause. (only for Multi-Media mode) To select the file. (on ly for Navigation mode) To exit the file. (only for Navigation mode) Scans backward during the file playback. (only for Multi-Media mode) Scans forward through the file playback. (only for Multi-Media mode) Number buttons. (only for Numeric mode) Use the button to select the next or previous page. (only for Navigation mode)

****** Page 18 ****** 8 Getting Started Connecting the Projector S-Video Output MHL 2 12 DVD player 4 3 HOMI 5 Video Output o-sub 7 6 o-sub 1 00 T *OTV q. DVD player, Set-up Box, HDTV receiver 9 9 •o 1 2 3 4 5 6 Description Power cord USB cable HDMI cable S-Video cable Composite video cable VGA cable RS232 7 8 9 10 11 12 10 11 Description Audio cable Jack/Jack VGA to component/HDTV adapter 3 RCA component cable RS232 cable Audio cable JackRCA MHL cable (MicroUSB to HDMI)

****** Page 19 ****** 9 Note: To ensure the projector works well with your computer, please make sure the timing of the display mode is compatible with the projector. Note: USB cable needs powered extender if the length is over 5 m.

****** Page 20 ****** 10 Turning the Projector On/Off Turning on the Projector 1 2 3 Ensure that the power cord and signal cable are securely connected. The Power indicator LED will flash red Turn on the projector by pressing ” Power” button on the control panel, and the Power indicator LED will turn blue. Turn on your source (computer, notebook, video player ,etc.). The projector will detect your source automatically. If the screen displays “Lock” and “Source” icons, it means the projector is locked onto a specific source type and there is no such type of input signal detected. If the screen displays “No Signal”, please make sure the signal cables are securely connected. If you connect to multiple sources at the same time, use the “Source ” button on either control panel or the remote control or direct source key on the remote control to switch between inputs. Power b utton o

****** Page 21 ****** 11 Turning the projector off 1 2 3 4 5 To turn the projector off, press the power button. This message appears: ” Please press the power button again to complete the shutdown process. ” Press the power button again. The LED power indicator will turn RED and blink rapidly after the projector is turned off, and the fan(s) will continue to operate for about 2 minutes to ensure that the system cools properly. (only supported under ” Instant Resume” mode) As long as the power cord remains plugged in, you can press the power button to turn the projector immediately back on anytime during the 2- minute shutdown process. (only supported under “Instant Resume” mode) Once the system has finished cooling, the LED power indicator will stop blinking and turn solid red to indicate standby mode. It is now safe to unplug the power cord Warning indicators: ” Projector Overheated. Lamp will automatically turn off soon. ” This onscreen message indicates that the projector has overheated. The lamp with automatically turn off, the projector will automatically shut down, and the LED temp indicator will turn solid red. Contact your local dealer or service center. ” Fan failed. Lamp will automatically turn off soon.” This onscreen message indicates that the fan has failed. The lamp will automatically turn off, the projector will automatically shut down, and the LED temp indicator will blink. Contact your local dealer or service center. Note: Whenever the projector automatically shuts down and the LED lamp indicator turns solid red, contact your local reseller or service center.

****** Page 22 ****** 12 Adjusting the Projected Image Adjusting the Height of Projected Image The projector is equipped with tilt adjusting wheels for adjusting the height of image. To raise/lower the image: Use Tilt adjusting wheels to fine-tune the display angle. Tilt adjusting wheel

****** Page 23 ****** 13 How to optimize image size and distance Consult the table below to find the optimal image sizes achievable when the projector is positioned at a desired distance from the screen. Example: If the projector is 3 m from the screen, good image quality is possible for image sizes between 80″ and 87″ Note: Remind as below figure, the space of 122 cm height is required when located at 3 m distance. screen Size Height: 122 cm from base to top of image Heigh 112 3 m Desired Distance Figure: Fixed distance with different zoom and screen size.

****** Page 24 ****** 14 Screen Size Desired (Min zoom) Distance Top Screen size (Max zoom) Top (m) 1.5 2 2.5 3 3.5 4 4.5 5 6 7 8 9 10 10.3 Diagonal (inch) 27 40 53 66 80 93 106 120 133 159 186 213 239 266 274 W (cm) x 59 x 33 88 x 50 118×66 147 x 83 176 x 99 206 x 116 235 x 132 265 x 149 294 x 165 353 x 199 412 x 232 471 x 265 529 x 298 588 x 331 606 x 341 From base to top of image (cm) 37 56 74 93 112 130 149 167 186 223 260 298 335 372 383 Diagonal (inch) 29 44 58 73 87 102 117 131 146 175 204 233 262 291 300 W (cm) x 65 x 36 97 x 54 129 x 73 161 x 91 194x 109 226x 127 258x 145 290x 163 323 x 181 387 x 218 452 x 254 516x 290 581 x 327 645 x 363 665 x 374 From base to top of image (cm) 41 61 82 102 122 143 163 184 204 245 286 326 367 408 420 Zoom Ratio:

****** Page 25 ****** 15 How to get a preferred image size by adjusting distance and zoom Desired mage size Height: 70 cm from base to top of image 1.7 m 1.9m Desired Distance The table below shows how to achieve a desired image size by adjusting either the position or the zoom ring. Example: to obtain an image size of 50″ set the projector at a distance 1.7 m and 1.9 m from the screen and adjust the zoom level accordingly.

****** Page 26 ****** 16 Desired Image Size Distance (m) Diagonal (inch) 30 40 50 60 70 80 90 100 120 150 180 200 250 300 Zoom Ratio: 1. lx W (cm) x H (cm) 66 x 37 89 x 50 111×62 133 x 75 155 x 87 177 x 100 199 x 112 221 x 125 266 x 149 332 x 187 398 x 224 443 x 249 553 x 311 664 x 374 Max zoom 1.0 1.7 2.1 2.4 2.7 3.1 3.4 4.1 5.1 6.2 6.9 8.6 10.3 Min zoom 1.5 1.9 2.3 2.6 3.0 3.4 3.8 4.5 5.6 6.8 7.5 9.4 Top (cm) From base to top of Image 42 56 70 98 112 126 140 168 210 252 280 350 420

****** Page 27 ****** 17 User Controls Installation menu The installation menu provides an onscreen display (OSD) for projector installation and maintenance. Use the OSD only when the message ” No signal input” is displayed on the screen. The menu options include settings and adjustments for screen size and distance, focus, keystone correction and more 1 2 3 4 5 Turn on the projector by pressing “Power” button on the control pad Press the menu button on the control pad to launch the OSD for projector installation and maintenance. hstallMion Installation Projecticm Prorcoon I-ocmn Auto Keystone Manual Peset Select 4 A$jusr English Press Frit The background pattern acts as a guide to adjusting the calibration and alignment settings, such as screen size and distance, focus and more The Installation menu includes the following options: •Projection Mode •Projection Location •Auto Keystone settings •Manual Keystone settings •Language settings •Reset to factory default function Use the up and down arrow keys to select an option, the left and right arrow keys to adjust selected option settings, and the right arrow key to enter a submenu for feature setting. The new settings will be saved automatically upon exiting the menu. Push the menu button anytime to exit the menu and return to the Acer welcome screen.

****** Page 28 ****** 18 Acer Empowering Technology Acer Empowering Key provide four Acer unique functions, they are ” Acer eView Management”, “Acer eTimer Management” , “Acer ePower Management” and i’ Acer e3D Management respectively. key to launch the Onscreen display main menu to modify its Press function. When the Empowering Menu is displayed, use the key to select the main menu. Acer eView Management e mpowering Menu Acer eView Management Sports ager Oarg Cineroa Acer eTimer Management e mpowering Menu Acer eTimer Management O Minutes cot—mown Acer ePower Management e mpowering Menu Acer ePower Management A1-to Acer e3D Management e mpowering Menu Acer e3D Managernent Sync Watntng ” Acer eView Management” is for display mode selection. Please refer to Onscreen Display Menus section for more detail. ” Acer eTimer Management” provides the reminding function for presentation time control. Please refer to Onscreen Display Menus section for more detail ” Acer ePower Management” provides user one shortcut to save the projector life. Please refer to Onscreen Disp lay section for more detail. ” Acer e3D Management” provides the 3D functions. Please refer to Onscreen Display Menus section for more detail.

****** Page 29 ****** 19 Onscreen Display (OSD) Menus The projector has multilingual OSD that allow you to make image adjustments and change a variety of settings. Using the OSD menus To open the OSD menu, press “MENU” on the remote control or control panel. When the OSD is displayed, use the A v keys to select any item in the main menu. After selecting the desired main menu item, press to enter submenu for feature setting. Use the keys to select the desired item and adjust the settings by using the 0″ increase noise reduction. Black Extension This ensures optimum black level for each analog source. Note: “Saturation and “Tint” functions are not supported under computer or HDMI mode.

****** Page 32 ****** 22 Image Projection Mode Projection Location Aspect Ratio 16:9 Auto Keystone Manual Keystone Sharpeness H. Position (Horizontal position) Image COhr Auto Front: The factory defau It setting. Rear: Reverses the image so you can project from behind a translucent screen. Auto: Automatically adjusts projection location of image. Desktop Ceiling: Turns the image upside down for ceiling-mounted projection Use this function to choose your desired aspect ratio. Auto: Keep the image with original width-higth ratio and maxi mize the image to fit native horizontal or vertical pixels. 4:3: The image will be scaled to fit the screen and displayed using a 4:3 ratio. 16:9: The image will be scaled to fit the width of the screen and the height adjusted to display the image using a 16:9 ratio. L.Box: Keep original signal aspect ratio and zoom in by 1.333 times. Automatically adjusts vertical image. Adjust image distortion caused by tilting projection. (±40 degrees) The Manual Keystone function is unavailable under Auto Keystone setting to “On ” . Adjusts the sharpness of the image. Press Press Press Press to decrease the sharpness. to increase the sharpness. to move the image left. to move the image right.

****** Page 33 ****** 23 V. Position (Vertical position) Frequency Tracking Press to move the image down. Press to move the image up. ” Frequency” changes the projector’s refresh rate to match the frequency of your computer’s graph ics card. If you can see a vertical flickering bar in the projected image, use th is function to make the necessary adjustments. Synchronizes the signal tim ing of the projector with the graphics card. If you experience an unstable or flickering image, use this function to correct it. HDMI Color Range Adjust the color range of the HDMI image data to correct color display error. • Auto: Automatically adjust by information from player. Limited Range: Prosess the input image as limited color range data. Full Range: Prosess the input image as full color range data. HDMI Scan Info Adjust the overscan ratio of the HDMI image on screen. • Auto: Automatically adjust by information from player. Underscan: Always no overscan on HDMI image. Overscan: Always keep overscan on HDMI image. Note: “H. Position “V. Position ‘I, “Frequency” and “Tracking” functions are not supported under HDMI or Video mode. Note: “HDMI Color Range” and “HDMI Scan Info” functions are only supported under HDMI mode.

****** Page 34 ****** 24 Setting Startup Screen Screen Capture Screen copturc in progress Plean wart Closed Caption Reset Setting Screen Capture Reset Use this function to select your desired startup screen. If you change the setting, the changes will take effect when you exit the OSD menu. • Acer: The defau It startup screen of your Acer projector. • User: Use memorize picture from “Screen Capture” function. Use this function to custom ize the startup screen. To capture the image that you want to use as the startup screen, follow the instructions below. Notice: Before proceeding with the following steps, make sure that the Keystone” is set to the defau It value 0 and the aspect ratio is set to 4:3. For details, refer to the ” Image” section. • • • • • • Change the “Startup Screen ” from the default setting “Acer” to ” User” Press “Screen Capture” to customize the startup screen. A dialog box appears to confirm the action. Choose “Yes” to use the current image as your customized startup screen. The capture range is the red rectangular area. Choose ” No” to cancel the screen capture and exit the onscreen display (OSD) A message appears, stating that the screen capture is in progress. When the screen capture is finished, the message disappears and the original display is shown. The customized startup screen, as shown below, takes effect when there is a new input signal or when you restart the projector. Selects a preferred closed captioning mode from CCI, CC2, CC3, CC4, (CCI displays captions in the primary language in your area). Select “Off” to turn off the caption ing feature. This function is only available when a composite video or S-Video input signal is selected and its system format is NTSC. Set your screen aspect ratio to 4:3. This function is not available when the aspect ratio is ” 16:9″ or “Auto” . Press the button and choose “Yes” to return the parameters on all menus to the factory default settings.

****** Page 35 ****** 25 Security Set user Password Security This projector provides a useful security function for the adm inistrator to manage usage of the projector . Press to change the ” Security” setting. If the security function is enabled, your must enter the “Administrator Password” first before changing the security settings. Select “On ” to enable the security function. The user has to enter a password to operate the projector. Please refer to the “User Password” section for details. If “Off” is selected, then the user can turn on the projector without password. Timeout(Min.) Once “Security” is activated to “On the administrator can set timeout function. Press or to select the timeout interval. The range is from 10 minute to 990 minutes. When the time is up, the projector will prompt the user to enter the password again. The factory default setting of “Timeout(Min.)” is “Off” . Once the security function is enabled, the projector will request user to enter password when switch on the projector . Both ” User Password” and “Administrator Password” can be accepted for th is dialogue. User Password Press to setup or change the ” User Password”. Press number keys to set your password on the remote control and press “MENU” to confirm. Press < to delete character. Enter the password when you see "Confirm Password" displayed. The password should be between 4 and 8 characters long. If you select "Request password only when plugging the power cord in. ", the projector will prompt the user to enter the password every tme the power cord is plugged. If you select "Always request password while projector turns on." , the user has to enter the password every time when the projector is turned on. ****** Page 36 ****** 26 Administrator Password The "Administrator Password" can be used in both the " Enter Administrator Password" and " Enter Password" dialog boxes. Press to change the "Admin istrator Password 'l. • The factory defau It of "Admin istrator Password " is " 1234" . If you forgot your administrator password, do the following to retrieve the adm inistrator password: An unique 6-digit Universal Password" which is printed on the Security Card (please check accessory in the box). This unique password is the number which will be accepted by projector anytime no matter what the Adm inistrator Password is. If losing th is security card and number, please contact with an Acer service center. Lock User Startup Screen Default Lock User Startup Screen is "OFF". If lock user startup screen is "ON", users cannot change startup screen anymore and avoid other users change that arbitrarily. Choose "OFF " to unlock startup screen. Management Management ECO Ann-toe Turn Auto Irstut Cf ECO Mode High Altitude Turn Off Mode Auto Shutdown Lamp Hour Elapse Lamp Reminding Lamp Hour Reset O boxt Choose "On " to dim the projector lamp which will lower power consumption, extend the lamp life and reduce noise. Choose "Off" to return normal mode. Choose "On" to turn on High Altitude mode. Operate the fans at full speed continuously to allow for proper high altitude cooling of the projector. Instant Off: Shuts down the projector without fan cooling. Instant Resume: Resumes the system when the Power button is pressed again within 2 minutes. The projector will automatically shutdown when there is no signal input after the allocated time. (default is 120 minutes) Displays the lamp's elapsed operating time (in hours). Activate this function to display a reminder to change the lamp 30 hours before its expected end-of-life. Press the button and choose "Yes" to turn the lamp hour counter to 0 hours. ****** Page 37 ****** 27 Audio Volume Mute Power On/Off Volume Alarm Volume Audio Press < to decrease the volume. Press to increase the volume. Choose "On" to mute the volume. Choose "Off" to restore the volume. Select this function to adjust the notification volume when turning the projector on/off. Select this function to adjust the volume of any warn ing notifications. 3D n to 30 Press Or M;nu Choose " On" to enable DLP 3D function. On: Choose this item while using DLP 3D glasses, 120Hz 3D capable graphics cards and HQFS format file or DVD with corresponding SW player. Off: Turn off 3D mode. ****** Page 38 ****** 28 21) to 3D 20 to 30 3D Format 3D Format 3D UR Invert 3D Warning Message 2D to 3D Support most of the 2D contents. Choose "On" to enable 2D to 3D function supported by DLP 3D technology. Please use DLP 3D glasses to have correct performance. “2D to 31)” is only supported under HDMI mode. Mode Choose mode of “Photo”, “Movie” and “User” as your prefered 3D setting. Convergence Choose convergrence effect of “Inward”, ” Middle” and “Outword” as your preferred 3D setting in “User” mode. Depth Choose depth effect of “Low”, ” Middle” and “Strong” as your prefered 3D setting in “User” mode. Adjust the 3D format to display 3D content correctly. “Frame Packing” is on ly supported under HDMI mode. If you see a discrete or overlapping image while wearing DLP 3D glasses, you may need to execute ” Invert” to get best match of left/right image sequence to get the correct image (for DLP 3D). Choose “On” to display the 3D warn ing message. Note: 30 display is now enabled. 1. Please make sure you have the correct 30 signals and glasses. Remember to turn 30 off if you dont want to see 3D images. . If the 30 display isnt correct. please try to enable 30 Sync Invert. 4. Display mode options will be disabled while in 3D mode Note: It needs correct settings on graphic card 3D application program for correct 3D display. Note: The SW players, such as Stereoscopic Player and DDD TriDef Media Player can support 3D format files. You can download these three players on web page below, – Stereoscopic Player (Trial): http:/Avww.3dtv.at/Downloads/lndex_en.aspx – DDD TriDef Media Player (Trial): http:mmww.tridef.com/download/TriDef-3-D-Experience-4.0.2.html Note: “3D LR Invert” is only available when 3D is enabled Note: There has reminder screen if 3D still enable when power on projector. Please adjust setting depended on your purpose.

****** Page 39 ****** Language Language Language Frenpis SQCt SS—I ska A or 29 key Choose the multilingual OSD menu. Use the to select your preferred menu language. Press to confirm the selection.

****** Page 40 ****** 30 Appendices Troubleshooting If you experience a problem with your Acer projector, refer to the following troubleshooting guide. If the problem persists, please contact your local reseller or service center. Image Problems and Solutions 2 Problem No image appears onscreen Partial, scrolling or incorrectly displayed image (for PC (Windows 2000/XPNista/ Windows 7)) Solution Connected as described in the “Getting Started section. Ensure none of the connector pins are bent or broken. Check if the projector lamp has been securely installed. Please refer to the “Replacing the Lamp” section. Make sure you have removed the lens cap and the projector is switched on. Press “RESYNC” on the remote control or control panel. For an incorrectly displayed image: Open “My Computer,” open the “Control Panel,” and then double-click the “Display” Icon. Select the “Settings” tab. Verify that your display resolution setting is lower than or equal to 1080p (1920 x 1080). Click the “Advanced Properties” button. If the problem still appears, change the monitor display you are using and follow the steps below: Verify that the resolution setting is lower than or equal to 1080p (1920 x 1080). Click the “Change” button under the ” Monitor” tab. Click “Show all devices”. Next, select “Standard monitor types” under the SP box, and choose the resolution mode you need under the “Models” box. Verify that the resolution setting of the monitor display is lower than or equal to 1080p (1920 x 1080).

****** Page 41 ****** 3 4 5 6 7 8 Partial, scrolling or incorrectly displayed image (For notebooks) The screen of the notebook computer is not displaying your presentation Image is unstable or flickering Image has vertical flickering bar Image is out of focus Image is stretched when displaying a “widescreen ” DVD title 31 Press “RESYNC” on the remote control or control panel. For an incorrectly displayed image: Follow the steps for item 2 (above) to adjust the resolution of your computer. Press the toggle output settings. Example: [Fn]+[F4], Compaq [Fn]+[F4], Dell , Gateway IBM HP NEC Toshiba If you experience difficu Ity changing resolutions or your mon itor freezes, restart all equipment including the projector. If you are using a Microsoft@ Windowse based notebook: Some notebook PCs may deactivate their own screens when a second display device is in use. Each has a different way to be reactivated. Refer to your computer’s manual for detailed information. If you are using an AppleO Mace OS based notebook: In System Preferences, open Display and select Video Mirroring “On Adjust the “Tracking” to correct it. Refer to the “Image” section for more information. Change the display color depth settings on your computer Use “Frequency” to make an adjustment. Refer to the ” Image” section for more information. Check and reconfigure the display mode of your graph ics card to make it compatible with the projector. Make sure the lens cap is removed. Adjusts the focus ring on the projector lens. Make sure the projection screen is within the required distance of 3.3 to 33.8 feet (1.0 to 10.3 meters) from the projector. Refer to the How to Get a Preferred Image Size by Adjusting Distance and Zoom ” section for more information. When you play a DVD encoded in anamorphic or 16:9 aspect ratio you may need to adjust the following settings: If you play a 4:3 format DVD title, please change the format to 4:3 in the projector OSD. If the image is still stretched, you will also need to adjust the aspect ratio. Set up the display format to 16:9 (wide) aspect ratio on your DVD player. If you play an Letterbox(LBX) format DVD title, please change the format to Letterbox(LBX) in the projector OSD.

****** Page 42 ****** 32 9 10 11 Image is too small or too large Image has slanted sides Image is reversed Adjust the zoom lever on the top of the projector Move the projector closer to or further from the screen Press “MENU” on the remote control. Go to ” Image – -> Aspect Ratio” and try different settings or press” Aspect Ratio” on the remote control to adjust directly. If possible, reposition the projector so that it is centered on the screen. Press the “Keystone / O” button on the remote control until the sides are vertical. Press “MENU” on the remote control. Go to ” Image – -> Auto Keystone” and choose “Off” on the OSD, if “Keystone” button is not available on the remote control. Select “Image –> Projection” on the OSD and adjust the projection direction.

****** Page 43 ****** OSD Messages Condition Message 33 Message Reminder Fan Fail – the system fan is not working Fan Fail. Lamp will automatically turn off soon. Projector Overheated – the projector has exceeded its recommended operating temperature and must be allowed to cool down before it may be used. Projector Overheated. Lamp will automatically turn off soon. Replace the lamp – the lamp is about to reach its maximum lifetime. Prepare to replace it soon. Lamp is approaching the end of its useful life in full power operation. Replacement suggested!

****** Page 44 ****** 34 Problems with the Projector 2 Condition The projector stops responding to all controls Lamp burns out or makes a popping sound Solution If possible, turn off the projector, then unplug the power cord and wait at least 30 seconds before reconnecting power. When the lamp reaches the end of its useful life, it will burn out and may make a loud popp ing sound. If th is happens, the projector will not turn on until the lamp module has been replaced. To replace the lamp, follow the procedures in the “Replacing the Lamp section.

****** Page 45 ****** LED & Alarm Definition Listing LED Messages Message Standby (power cord plugged in) Power button ON Lamp retry Turning off (cooling state) Turning off (cooling completed) Error (thermal failure) Error (fan lock failure) Error (lamp breakdown) Error (color Wheel fail) 35 Power LED Lamp LED Red Qu ick flashing Temp LED Red Quick flashing Red Qu ick flash ing Blue Qu ick flash ing

****** Page 46 ****** 36 Cleaning and replacing the dust filters Cleaning the dust filters Clean the dust filters after every 1000 hours of use. If they are note cleaned periodically, they can become clogged with dust, preventing proper ventilation. This can cause overheating and damage the projector. 2 00 Follow these steps: 1 2 3 4 5 Turn the projector off. Wait for the Power LED to stop flashing then unplug the power cord. Allow the projector at least 30 mins to cool down. Pull out the dust filter. (Illustration #1, 2) To clean the dust filters, use a small vacuum cleaner designed for computers and other office equipment. If the dirt is difficult to remove or the filter is broken, please contact your local dealer or service center to obtain a new filter.

****** Page 47 ****** 37 Replacing the Lamp Use a screwdriver to remove the screw(s) from the cover, and then pull out the lamp The projector will detect the lamp life. You will be shown a warning message Lamp is approaching the end of its useful life in full power operation. Replacement Suggested! ” When you see this message, change the lamp as soon as possible. Make sure the projector has been cooling down for at least 30 minutes before changing the lamp. Warning: The lamp compartment is hot! Allow it to cool down before changing the lamp S. WARNING: U *fid g “lion.

****** Page 48 ****** 38 To Change the Lamp 1 2 3 4 5 6 7 8 Turn off the projector by pressing the power button. Allow the projector at least 30 mins to cool down. Disconnect the power cord. Open the screw cover on the right side of the projector. (Illustration #1) Use a screwdriver to loosen the screw on the right side of the projector. (Illustration #2) Push and slide the top cover (Illustration #3) and then open the top cover. (Illustration #4) Loosen two screws on the lamp module (Illustration #5) and pull up the lamp bar. (Illustration #6) Pull out the lamp module by force. (Illustration #7) To replace the lamp module, reverse the previous step Warning: To reduce the risk of personal injury, do not drop the lamp module or touch the lamp bulb. The bulb may shatter and cause injury if it is dropped.

****** Page 49 ****** 39 Ceiling Mount Installation If you wish to install the projector using a ceiling mount, please refer to the steps below: 1 2 Drill four holes into a solid, structurally sound part of the ceiling, and secure the mount base. 3 3 Note: Screws are not included. Please obtain the appropriate screws for your type of ceiling. Secure the ceiling rod using the appropriate type of four-cylinder screws. Ceiling Mount Base Short Rod o Screw Type A 50 mm length ‘8 mm diameter – – Attach toceiling Long Rod Extension Rod Long Cylinder Cap Allen Key – For tighteninyloasening Ti ghtening Screw Medium Rod

****** Page 50 ****** 40 3 Use the appropriate number of screws for the projector size to attach the projector to the ceiling mount bracket. Smaller Washer Large Washer Projector Bracket Supports projector and allows for adjustments To Screw Type B Spacer – For heat dissipation 4 Note: It is recommended that you keep a reasonable space between the bracket and the projector to allow for proper heat distribution. Use two washers for extra support, if deemed necessary. Attach the ceiling bracket to the ceiling rod. O O O Screw Type A 50 mm length/ 8mm diameter Large cylinder cap Allen Key – For tighteningnoosening Tighten ing Screw

****** Page 51 ****** 5 41 Adjust the angle and positioning as necessary. Tightening Screw Allen Key 300 3600 Allen Key Tightening Screw Note: The appropriate type of screw and washer for each model is listed in the table below. 3 mm diameter screws are enclosed in the screw pack. Models Screw Type B Diameter (mm) Length (mm) Washer Type Large 8 Small o SCREW SPEC. o o 3 o o 20 55.00 mm 55.00 mm o O 0 O 0 000 M3 x 20 mm

****** Page 52 ****** 42 Specifications The specifications listed below are subject to change without notice. For final specs, please refer to Acer’s published marketing specifications. Projection system Resolution Computer compatibility Video compatibility Aspect ratio Displayable colors Projection lens Projection screen size (diagonal) Projection distance Throw ratio Horizontal scan rate Vertical refresh scan rate Lamp type Keystone correction Audio Weight Dimensions (L x W x H) Remote control Digital Zoom Power supply Power consumption Operating temperature 1/0 connectors DLP@ Native: 720P (1280 x 720) , Maximum: UXGA (1600 x 1200), WSXGA+ ( 1080p(1920x 1080), WUXGA-RB (1920 x 1200, RB) IBM PC and compatibles, Apple Macintosh, iMac and VESA standards: SXGA, XGA, VGA, SVGA, SXGA+, WXGA, WXGA+, WSXGA+, WUXGA NTSC (3.58/4.43), PAL (B/D/G/H/I/M/N), SECAM (B/D/G/K/ KI/L), HDTV (720p, 1080i, 1080p), EDTV (480p, 576p), SDTV (480i, 576i) 4:3, 16•.9, L.Box 1.07 Billion colors F/ 2.5 – 2.67, f = 21.86 mm – 24.00 mm, 1.1X manual zoom lens 27″ (0.69m) – 300″ (7.62 m) 3.3′ (1.0 m) – 33.8′ (10.3 m) (1.55 – 1.70:1) 30k – 100 kHz 24-120Hz 190 W user-replaceable lamp +/- 40 degrees Internal speaker with 2 W output 2.4 Kg (5.29 lbs.) 288 mm x 225 mm x 83.3 mm (11.3″ x 8.9″ x 3.3″) Full-function remote control AC input 100 – 240 V, 50 – 60 Hz 235 w ± ooc to aooc / 320F to 1040F Power socket xl USB x 1: for remote computer control HDMI x2 S-Video xl 3 RCA Component video xl Composite input xl VGA IN xl RS232 xl Audio input xl

****** Page 53 ****** Standard package contents 43 AC power cord xl VGA cable xl Remote control xl Batteries x 2 (for remote control) User’s Gu ide (CD-ROM) xl Qu ick start guide xl Security card x 1 Carrying case xl

****** Page 54 ****** Compatibility modes A. VGA Analog 1 VGA Analog – PC Signal Modes VGA SVGA XGA SXGA QuadVGA SXGA+ UXGA Power Mac G4 i Mac DV (G3) Resolution 640×480 640×480 640×480 640×480 640×480 800×600 800×600 800×600 800×600 800×600 800×600 1024×768 1024×768 1024×768 1024×768 1024×768 1152×864 1 152×864 1 152×864 1280X1024 1280X1024 1280×960 1280×960 1400×1050 1600×1200 640×480 640×480 800×600 1024×768 1152×870 1280×960 1024×768 V.Frequency [Hz] 60 72 75 85 119.51 56 60 72 75 85 119.85 60 70 75 85 119.804 70 75 85 60 72 75 85 60 75 60 60 60 66.6(67) 60 60 75 75 75 H.Frequency [KHz] 31.47 37.86 37.50 43.27 61.60 35.20 37.88 48.08 46.88 53.67 77.20 48.36 56.48 60.02 68.67 98.80 63.80 67.50 77.10 63.98 77.90 79.98 91.15 60.00 75.00 65.32 75.00 31.50 35.00 37.88 48.36 68.68 75.20 60.30

****** Page 55 ****** 2 3 1 VGA Analog – Extended Wide timing Modes WXGA WXGA+ WUXGA WSXGA WSVGA VGA Analog Modes 480i 480p 576i 576p 720p 720p 1080i 1080i 1080p 1080p Resolution 1280×768 1280×768 1280×768 1280×720 1280×720 1280×800 1366×768 1440×900 1920×1080-RB V.Frequency [Hz] 60 75 85 60 1920×1080-ElA 1920x 1200-RB 1680×1050 1024×600 Component Signal 119.858 60 60 60 60 60 59.95 60 60 Resolution 720×480 720×480 720×576 720×576 1280×720 1280×720 1920×1080 1920×1080 1920K 1080 1920×1080 B. HDMI Digital HDMI PC Signal Modes VGA SVGA Resolution 640×480 640×480 640×480 640×480 640×480 800×600 V -Frequency [Hz] 59.94(29.97) 59.94 50(25) 50 60 50 60(30) 50(25) 60 50 V.Frequency [Hz] 60 72 75 85 119.51 56 45 H.Frequency [KHz] 47.78 60.29 68.63 44.80 92.89 49.60 47.71 55.90 66.60 67.50 74.04 65.30 37.30 H.Frequency [KHz] 27.00 31.47 27.00 31.25 45.00 37.50 33.75 33.75 67.50 56.25 H.Frequency [KHz] 31.47 37.86 37.50 43.27 61.60 35.20

****** Page 56 ****** 46 XGA SXGA 63.80 67.50 77.10 63.98 77.90 79.98 91.15 QuadVGA 60.00 75.00 SXGA+ 65.32 UXGA 75.00 PowerBook G4 31.50 35.00 37.88 i Mac DV (G3) 800×600 800×600 800×600 800×600 1024×768 1024×768 1024×768 1024×768 1024×768 1152×864 1152×864 1152×864 1280×1024 1280K 1024 1280×1024 1280×1024 1280×960 1280×960 1400×1050 1600×1200 640×480 640×480 800×600 1024×768 1 152×870 1280×960 1024×768 2 HDMI Extended Wide timing Modes WXGA WXGA+ WUXGA Resolution 1280×768 1280×768 1280×768 1280×720 1280×720 1280×800 1366×768 1440×900 1920×1080-RB 1920×1080-ElA 1920×1200-RB 60 72 75 85 1 19.85 60 70 75 85 119.804 70 75 85 60 72 75 85 60 75 60 60 60 66.6(67) 60 60 75 75 75 V.Frequency [Hz] 60 75 85 60 119.858 60 60 60 60 60 59.95 37.88 48.08 46.88 53.67 77.20 48.36 56.48 60.02 68.67 98.80 48.36 68.68 75.20 60.30 H.Frequency [KHz] 47.78 60.29 68.63 44.80 92.89 49.60 47.71 55.90 66.60 67.50 74.04

****** Page 57 ****** 3 4 WSXGA WSVGA HDMI Modes 480i 480p 576i 576 720 720p 1080i 1080i 1080p 1080p 1080 HDMI 1680×1050 1024×600 Video Signal Resolution 720×480 720×480 720×576 720×576 1280×720 1280×720 1920×1080 1920×1080 1920×1080 1920x 1080 1920×1080 1.4a 3D Timing 60 60 V.Frequency [Hz] 59.94(29.97) 59.94 50(25) 50 60 50 60(30) 50(25) 60 50 24/23.97 47 65.30 37.30 H.Frequency [KHzl 27.00 31.47 27.00 31.25 45.00 37.50 33.75 33.75 67.50 56.25 27.00 Modes 720p (Frame Packing) 720 (Frame Packin ) 1080 (Frame Packing) 720p (Top and Bottom) 720p (Top and Bottom) 1080i (To and Bottom) 1080i (To and Bottom) 1080p (Top and Bottom) 1080p (Top and Bottom) 1080 (To and Bottom) 720p (Side by Side (Half)) 1080i (Side by Side (Half)) 1080i (Sideb Side (Half)) 1080p (Sideb Side (Half)) 1080p (Side by Side (Half)) Resolution 1280×720 1280×720 1920×1080 1280×720 1280×720 1920×1080 1920×1080 1920×1080 1920×1080 1920×1080 1280×720 1920×1080 1920×1080 1920×1080 1920×1080 V.Frequency [HzJ 50 60 24 50 60 50 (25) 60 (30) 24 50 60 60 50 (25) 60 (30) 50 60 H.Frequency [KHzJ 75 90 54 37.5 45 28.1 33.8 27 56.3 67.5 45 33.75 33.75 56.25 67.5 Graphic source monitor Horizontal scan rate: range limits Vertical scan rate: Max. pixel rate: 151<-100 kHz 24-120 Hz Analog: 165 MHz Digital:165 MHz ****** Page 58 ****** 4-8 C. MHL Digital Modes VGA 480i 576i 480p 480p_2x 576 576p_2x 720p 720 1080i 1080i 1080p 1080p 1080p Graphic source monitor range limits Resolution 640×480 720×480 (1440×480) 720×576 (1440×576) 720×480 1440×480 720×576 1440×576 1280×720 1280×720 1920×1080 1920×1080 1920×1080 1920M 080 1920×1080 Horizontal scan rate: Vertical scan rate: Max. pixel rate: V -Frequency [HzJ 59.94/60 59.94/60 50(25) 59.94/60 59.94/60 50 50 59.94/60 50 60(30) 50(25) 23.97/24 25 29.97/30 H.Frequency [KHz] 31.5 15.734 15.625 31.47 31.5 31.25 31.25 45 37.5 33.75 28.13 27 28.13 33.75 15-50 kHz 24-60 Hz Digital: 75 MHz ****** Page 59 ****** 49 Regulations and safety notices FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the device and receiver. Connect the device into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio/television technician for help Notice: Shielded cables All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations. Notice: Peripheral devices Only peripherals (input/output devices, terminals, printers, etc.) certified to comply with the Class B limits may be attached to this equipment. Operation with non-certified peripherals is likely to result in interference to radio and TV reception. Caution Changes or modifications not expressly approved by the manufacturer could void the user's authority, which is granted by the Federal Communications Commission, to operate this device. Operation conditions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Notice: Canadian users This Class B digital apparatus complies with Canadian ICES-003. ****** Page 60 ****** 50 Remarque Ilintention des utilisateurs canadiens Cet appareil numérique de la classe B est conforme a la norme NMB-003 du Canada. Declaration of Conformity for EU countries Acer hereby declares that this projector series is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Compliant with Russian regulatory certification ME61 UA.TR 002 Radio device regulatory notice Note: The regulatory information below is for models with wireless LAN and/or Bluetooth only. General This product complies with the radio frequency and safety standards of any country or region in which it has been approved for wireless use. Depending on configurations, this product may or may not contain wireless radio devices (such as wireless LAN and/or Bluetooth modules). Canada — Low-power license-exempt radio communication devices (RSS-210) a b Common information Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device. Operation in 2.4 GHz band To prevent radio interference to the licensed service, this device is intended to be operated indoors and installation outdoors is subject to licensing. List of applicable countries Th is device must be used in strict accordance with the regu lations and constraints in the country of use. For further information, please contact the local office in the country of use. Please see ec.europa.eu/enterprise/rtte/implem.htm for the latest country list. ****** Page 61 ****** acer Acer Incorporated 8F, 88, l, Xmtai 5th Rd., Xizhi New Taipei City 221, Taiwan Declaration of Conformity we, Acer Incorporated 8F, 88, Sec. l, Xintai 5th Rd., Xizhi, New Taipei City 221, Taiwan Contact Person: Mr. RU Jan, e-mail:ru.jan@acer.com And, Acer Italy s.r.l Via Lepetit, 40, 20020 Lainate (MI) Italy Tel: +39-02-939-921 ,Fax: +39-02 9399-2913 acer.it Declare under our own responsibility that the product: Product: Trade Name: Model Number: Projector Acer H7P1141 115370BD/E131D/HE-711J To which this declaration refers conforms to thc relevant standard or other standardizing documents: EN 55022:2006/A112007 Class B; EN 5502412010 EN 61000-3-2:2006+A I Class A; EN61000-3-3:2008 EN 60950-1 :2009+Al EN 50581:2012 We hereby declare above product is in compliance with the essential requirements and other relevant provisions of EMC Directive 2004/108/EC, Low Voltage Directive 2006/95/EC, RoHS Directive 2011/65/EU and Directive 2009/125/EC with regard to establishing a framework for the setting of ecodesign requirements for energy-related product. Year to begin affixing CE marking 2013. RU Jan Sr. Manager Regulation, Acer Inc. Feb. 6 2013 Date ****** Page 62 ****** acer Acer America Corporation 333 West San Carlos St., Suite 1500 San Jose, CA 95110 Tel; 254-298-4000 Fax: 254-298-4147 www acer. com Federal Communications Commission Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The following local Manufacturer / Importer is responsible for this declaration: Product: Model Number: Machine Type: Name of Responsible Party: Address of Responsible Party: Contact Person: Phone No.: Fax No.: DLP Projector 1-17P1141 H5370BD/E131D/HE-711J Acer America Corporation 333 West San Carlos St. Suite 1500 San Jose, CA 95110 Acer Representative 254-298-4000 254-298-4147


FREE ENGLISH PDF

OPERATING INSTRUCTIONS

USER GUIDE – USER MANUAL

OWNER GUIDE – OWNER MANUAL

REFERENCE GUIDE – REFERENCE MANUAL

INSTRUCTION GUIDE – INSTRUCTION MANUAL

ACER HE-711J (01) PDF MANUAL

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.