Post questions, comments, reviews or page errors in the comment box below.
PDF Content Summary:
****** Page 1 ****** Acer Projector Pl 287/M416/PE-X45 Pl 387W/M426/PE-W45 P5515/N 156/PN-805 H6517BD/E145D/HE-801J 1-16517ST/E145S/HE-801ST Series User’s Guide
****** Page 2 ****** Copyright 0 2014. Acer Incorporated. All Rights Reserved. Acer Projector User’s Guide Original Issue: 12/2014 Changes may be made periodically to the information in this publication without obligation to notify any person of such revisions or changes. Such changes will be incorporated in new editions of th is manual or supplementary documents and publications. Th is company makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims the implied warranties of merchantability or fitness for a particu lar purpose. Record the model number, serial number, purchase date and place of purchase information in the space provided below. The serial number and model number are recorded on the label affixed to your projector. All correspondence concerning your un it shou ld include the serial number, model number and purchase information. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electron ically, mechanically, by photocopy, recording or otherwise, without the prior written permission of Acer Incorporated. Model number: Serial number Date of purchase: Place of purchase: Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies’ product names or trademarks are used herein for identification purposes only and belong to their respective companies. HDMITM, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. I”
****** Page 3 ****** iii Information for your safety and comfort Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. Turning the product off before cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning Caution for plug as disconnecting device Observe the following guidelines when connecting and disconnecting power to the external power supply unit: Install the power supply unit before connecting the power cord to the AC power outlet. Unplug the power cord before removing the power supply unit from the projector. If the system has multiple sources of power, disconnect power from the system by unplugging all power cords from the power supplies. Caution for Accessibility Be sure that the power outlet you plug the power cord into is easily accessible and located as close to the equipment operator as possible. When you need to disconnect power to the equipment, be sure to unplug the power cord from the electrical outlet. Warnings! Do not use this product near water. Do not place this product on an unstable cart, stand or table. If the product falls, it could be seriously damaged. Slots and openings are provided for ventilation to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should never be placed near or over a radiator or heat register, or in a built-in installation unless proper ventilation is provided. Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind onto or into the product.
****** Page 4 ****** To avoid damage of internal components and to prevent battery leakage, do not place the product on a vibrating surface. Never use it under sporting, exercising, or any vibrating environment which will probably cause unexpected short current or damage rotor devices, lamp. Using electrical power This product should be operated from the type of power indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company. Do not allow anything to rest on the power cord. Do not locate this product where people will walk on the cord. If an extension cord is used with this product, make sure that the total ampere rating of the equipment plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure that the total rating of all products plugged into the wall outlet does not exceed the fuse rating. Do not overload a power outlet, strip or receptacle by plugging in too many devices. The overall system load must not exceed 80% of the branch circuit rating. If power strips are used, the load should not exceed 80% of the power strip’s input rating This product’s AC adapter is equipped with a three-wire grounded plug The plug only fits in a grounded power outlet. Make sure the power outlet is properly grounded before inserting the AC adapter plug. Do not insert the plug into a non-grounded power outlet. Contact your electrician for details. Warning! The grounding pin is a safety feature. Using a power outlet that is not properly grounded may result in electric shock and/or injury. Note: The grounding pin also provides good protection from unexpected noise produced by other nearby electrical devices that may interfere with the performance of this product. Use the product only with the supplied power supply cord set. If you need to replace the power cord set, make sure that the new power cord meets the following requirements: detachable type, UL listed/CSA certified, VDE approved or its equivalent, 4.5 meters (15 feet) maximum length.
****** Page 5 ****** Product servicing Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel. Unplug this product from the wall outlet and refer servicing to qualified service personnel when: the power cord or plug is damaged, cut or frayed liquid was spilled into the product the product was exposed to rain or water the product has been dropped or the case has been damaged the product exhibits a distinct change in performance, indicating a need for service the product does not operate normally after following the operating instructions Note: Adjust only those controls that are covered by the operating instructions, since improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal condition. Warning! For safety reasons, do not use non-compliant parts when adding or changing components. Consult your reseller for purchase options. Your device and its enhancements may contain small parts. Keep them out of the reach of small children. Additional safety information Do not look into the projector’s lens when the lamp is on. The bright may hurt your eyes. Turn on the projector first and then signal sources Do not place the product in following environments: Space that is poorly ventilated or confined. At least 50cm clearance from walls and free flow of air around the projector is necessary. Locations where temperatures may become excessively high, such as inside of a car with all windows rolled up Locations where excessive hum idity, dust, or cigarette smoke may contam inate optical components, shortening the life span and darken ing the image. Locations near fire alarms. Locations with an ambient temperature above 40 oc/104 OF. Locations where the altitudes are higher than 10000 feet. Unplug immediately if there is something wrong with your projector. Do not operate if smoke, strange noise or odor comes out of your projector. It
****** Page 6 ****** VI might cause fire or electric shock. In this case, unplug immediately and contact your dealer. Do not keep using this product to break or drop it. In this case contact your dealer for inspection. Do not face the projector lens to the sun. It can lead to fire. When switching the projector off, suggest to ensure the projector completes its cooling cycle before disconnecting power. Do not frequently turn off the main power abruptly or unplug the projector during operation. The best way is to wait for the fan to turn off before turning main power off. Do not touch air outlet grille and bottom plate which becomes hot. Clean the air filter frequently if have. The temperature inside may rise and cause damage when the filter/ventilation slots clogged with dirt or dust. Do not look into the air outlet grille when projector is operating. It may hurt your eyes. Always open the lens shutter or remove the lens cap when the projector is on. Do not block the projector lens with any object when the projector is under operation as this could cause the object to become heated and deformed or even cause a fire. To temporarily turn off the lamp, press HIDE on the remote control. The lamp becomes extremely hot during operation. Allow the projector to cool for approximately 45 minutes prior to removing the lamp assembly for replacement. Do not operate lamps beyond the rated lamp life. It could cause it to break on rare occasions. Never replace the lamp assembly or any electronic components unless the projector is unplugged. The product will detect the life of the lamp itself. Please be sure to change the lamp when is showing warning message. When changing the lamp, please allow unit to cool down, and follow all changing instructions. Reset the “Lamp Hour Reset” function from the Onscreen display ” Management” menu after replacing the lamp module. Do not attempt to disassemble this projector. There are dangerous high voltages inside which may hurt you. The only user serviceable part is the lamp which has its own removable cover. Refer servicing only to suitable qualified professional service personnel Do not stand the projector on end vertically. It may cause the projector to fall over, causing injury or damage. This product is capable of displaying inverted images for ceiling mount installation. Only use acer ceiling mount kit for mounting the projector and ensure it is securely installed
****** Page 7 ****** vii Caution for Listening To protect your hearing, follow these instructions. Increase the volume gradually until you can hear clearly and comfortably. Do not increase the volume level after your ears have adjusted Do not listen to music at high volumes for extended periods. Do not increase the volume to block out noisy surroundings. Decrease the volume if you can ‘t hear people speaking near you. Disposal instructions Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle. For more information on the Waste from Electrical and Electronics Equipment (WEEE) regulations, visit acer-group.com/public/Sustainability/sustainability01.htm Mercury advisory For projectors or electronic products containing an LCD/CRT monitor or display: ‘Lamp(s) contain Mercury, Lamp(s) inside this product contain mercury and must be recycled or disposed of according to local, state or federal laws. For more information, contact the Electronic Industries Alliance at eiae.org. For lamp-specific disposal information, check lamprecycle.org
****** Page 8 ****** VIII First things first Usage Notes Do: Turn off the product before cleaning. Use a soft cloth moistened with mild detergent to clean the display housing. Disconnect the power plug from AC outlet if the product is not being used for a long period of time. Don’t: Block the slots and openings on the unit provided for ventilation. Use abrasive cleaners, waxes or solvents to clean the unit. Use under the following conditions: In extremely hot, cold or humid environments. In areas susceptible to excessive dust and dirt. Near any appliance that generates a strong magnetic field. Place In direct sunlight. Precautions Follow all warnings, precautions and maintenance as recommended in this user’s guide to maximize the life of your unit. Warning: Do not look into the projector’s lens when the lamp is on. The bright light may hurt your eyes. To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. Please do not open or disassemble the product as this may cause electric shock. When changing the lamp, please allow unit to cool down, and follow all changing instructions. This product will detect the life of the lamp itself. Please be sure to change the lamp when it shows warn ing messages. Reset the “Lamp Hour Reset” function from the Onscreen display ” Management” menu after replacing the lamp module. When switching the projector off, please ensure the projector completes its cooling cycle before disconnecting power. Turn on the projector first and then the signal sources. Do not use lens cap when projector is in operation. When the lamp reaches the end of its life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn back on until the lamp module has been replaced. To replace the lamp, follow the procedures listed under “Replacing the Lamp ‘I .
****** Page 9 ****** Information for your safety and comfort First things first Usage Notes Precautions Introduction Product Features Package Overview Projector Overview Projector Outlook Control Panel Remote Control Layout MHL (Mobile High-Definition Link) Control Getting Started Connecting the Projector Turning the Projector On/Off Turning on the Projector Turning the projector off Adjusting the Projected Image Adjusting the Height of Projected Image How to optimize image size and distance How to get a preferred image size by adjusting distance and zoom User Controls Installation menu Onscreen Display (OSD) Menus Color lma ge Setting Management Audio 3D Language Acer LAN webpage management iii viii VIII VIII 1 2 3 3 5 6 8 9 9 11 11 12 13 13 14 19 23 23 25 26 28 31 33 34 35 35 36
****** Page 10 ****** How to login in Home Control Panel Network Setting Alert Setting Logout Appendices Troubleshooting LED & Alarm Definition Listing Cleaning and replacing the dust filters Replacing the Lamp Ceiling Mount Installation Specifications Compatibility modes Regulations and safety notices 36 37 37 38 38 39 40 40 44 45 46 47 50 53 58
****** Page 11 ****** 1 Introduction Product Features This product is a single-chip DLP@ projector. Outstanding features include: DLP@ technology P1287/M416/PE-X45 series: Native 1024 x 768 XGA resolution Pl 387W/M426/PE-W45 series: Native 1280 x 800 WXGA resolution P5515/N156/PN-805/H6517BD/E145D/HE-801J/H6517ST/E 145S/HE-801ST series: 1920×1080 1080p resolution Full/4:3/16:9/L.Box aspect ratio supported Enables projecting 3D content via DLP Link Technology (Nvidia 3DTV Play Ready only on 1-16517BD/E IJ/H6517ST/E 145S/HE-801ST series) Acer ColorBoost technology delivers nature’s true colors for vivid, life-like images High brightness and contrast ratio Versatile display modes (Bright, Presentation, Standard, Video, Game, Education, Movie, Dark Cinema, Sports, User) enable optimum performance in any situation NTSC / PAL / SECAM compatible and HDTV (720p, 1080i, 1080p) supported Lower power consumption and economy (ECO) mode extends lamp life Acer EcoProjeciton Technology delivers Intelligent power management approach and physical efficiency improvement Equipped with HDMITM & MHL connection supporting HDCP Advanced digital keystone correction optimizes presentations Smart detection delivers quick, intelligent source detection Multi-language onscreen display (OSD) menus Manual focus projection lens zooms up to LOX / 1. lx / 1.2x / 1.36x 2x digital zoom and pan function Microsoft@ Windows@ 2000, XP, Vista@, Windows 7, Windows 8, Macintosh@ OS compliant Note: Functions vary depending on model definition.
****** Page 12 ****** 2 Package Overview This projector comes with all the items shown below. Check to make sure your unit is complete. Contact your dealer immediately if any thing is missing Projector 2 x Batteries (option) Qu ick start gu ide ooa oaoa oooa Remote control Power cord Acer Projecr:or Security Card Security card Carrying case (option) VGA cable User’s gu ide Dust filters (option)
****** Page 13 ****** Projector Overview Projector Outlook Front / upper side 32 1 2 3 4 4 Description Remote control receiver Power button Control panel Lamp cover 8 5 6 7 8 3 5 6 1 7 Description Zoom lever Focus ring Projection lens Tilt adjusting wheels
****** Page 14 ****** 4 Right / Rear side 4 10 11 12 15 14 5 4 16 3 678 MHL USE CTRL escrip Ion 13 1 2 3 4 5 6 7 8 9 12 3 1 6 7 8 10 11 12 13 14 15 16 9 ‘X: SV OUT o nunto •txrr US8CVRL 4 12 11 15 10 Composite video input connector S-Video input connector Monitor loop-through output connector (for VGA IN 2 only) PC analog signal/HDTV/component video input connector (VGA, VGA IN, VGA IN 1, VGA IN 2) Security bar Audio input connector (for S-Video, Composite) Audio out connector Audio in connector (for VGA IN 1, VGA 17 LAN (RJ45 Port for 101100M Ethernet) escriptlon RS232 connector Mini USB connector HDMI/MHL connector (I-IDMVMHL, HDMI I/MHL) Power socket KensingtonTM lock port HDMI 2 connector Audio input connector ( for S-Video, Composite, VGA) 5V DC output connector Note: Functions vary depending on model definition.
****** Page 15 ****** Control Panel 10 8 5 3 1 POI VER O 2 LA P O MODE 1 2 3 4 5 6 7 8 9 Icon A 6 Function POWER LAMP TEMP RESYNC SOURCE POWER MODE MENU 7 Description Power Indicator LED Lamp Indicator LED Temp Indicator LED Automatically synchronizes the projector to the input source. Changes the active source. See the contents in “Turning the Projector On/Off” section. Press ” MODE” to select the display mode from Bright, Presentation, Standard, Video, Game, Education and User. Press ” MENU” to launch the Onscreen display (OSD) menu, back to the previous step for the OSD menu operation or exit the OSD menu. Confirm your selection of items. Four directional select Use to select items or make 10 A keys Keystone adjustments to your selection. Adjusts the image to compensate for distortion caused by tilting the projector. Note: Functions vary depending on model definition.
****** Page 16 ****** 6 Remote Control Layout MEDIA SETUP 1 3 4 6 8 10 12 14 16 18 20 22 24 VENU BACK ENTER escrip Ion 25 26 section. 2 3 4 5 6 7 8 9 10 11 12 13 2 5 7 9 11 13 15 17 19 21 23 unction Infrared tr an sm itter POWER SOURCE MODE HIDE RATIO ZOOM FREEZE MENU KEYSTONE Four directional select keys MENU 7 8 SOUSBA OMIOVI ; S.wOLo 9 uses con Sends signals to the projector. Refer to the “Turning the Projector On/Off’l Press “31)” to select 3D models. Changes the active source. Press ” MODE” to select the display mode from Bright, Presentation, Standard, Video, Game, Education and User. Momentarily turns off the video. Press HIDE” to hide the image, press again to display the image. No function. To choose the desired aspect ratio. Zooms the projector display in or out To pause the screen image. Press ” MENU” to launch the Onscreen display (OSD) menu, back to the previous step for the OSD menu operation or exit the OSD menu. Confirm your selection of items. Adjusts the image to compensate for distortion caused by tilting the projector. Use up, down, left, right buttons to select items or make adjustments to your selection.
****** Page 17 ****** 14 15 16 17 18 19 20 21 22 23 24 25 26 Icon ENTER BACK Function Pre./Rewind Enter/ Play/ Pause Back/Stop Next/Fast forward KeyPad 00 PgUp/PgDn COMPONENT VIDEO VGA S-VIDEO SD/USB A USB B HDMI/DVI LANWiFi Laser pointer Laser button 7 Description No function. No function. No function. No function. Press “0-9″ to input a password in the ” Security” OSD. For computer mode on ly. Use th is button to select the next or previous page. This function is only available when USB Ctrl connector (mini type B) is connected to a computer via a USB cable. No function. To change source to COMPOSITE VIDEO. Press “VGA” to change source to the VGA connector. This connector supports analog RGB, YPbPr (480p/576p/720p/ 1080i), YCbCr (480iß76i) and RGBsync. To change source to S-Video. No function. For USB control and firmware upgrade. To change source to HDMI/MHL. (no DVI function) Press ” LANNViFl” to display the image which is wire or wirelessly transm itted from the PC to the projector via the “Acer LAN webpage management” utility. Aim the remote at the viewing screen. Aim the remote at the viewing screen, press and hold this button to activate the laser pointer. This function is not supported in Japanese market. Note: Functions vary depending on model definition.
****** Page 18 ****** 8 MHL (Mobile High-Definition Link) Control Control Mode 1 3 4 5 8 2 3 4 5 6 7 8 MENU .ö@üÜ VGA ; S•V’OEO “NUSBA HOMIiUV1 LAU.Wifi usaa 2 6 7 Press “MODE” Mode Mode Navigation Control MHL Control Mode Numeric MHL control Icon ENTER BACK oo omponent MODE SOURCE MENU Direction Keys Select Exit PgUp/PgDn KeyPad escnptlon button for one second to activate the MHL Control Mode. To exit, press the “MODE” button again. Press the “SOURCE” button to toggle between Navigation or Numeric mode. Press to launch the root memu. (on ly for Navigation mode) Use up, down, left, right buttons to select items or make adjustments to your selection. (on ly for Navigation mode) To select the file. (only for Navigation mode) To exit the file. (only for Navigation mode) Use the button to select the next or previous page. (on ly for Navigation mode) Number buttons. (on ly for Numeric mode) Note: Functions vary depending on model definition.
****** Page 19 ****** Getting Started Connecting the Projector S-Video output Video output 00 14 Smart Phone DVD player, Set-top Box, HDTV receiever DVD player MHL 11 R BG k'”.iapter HDMI D-Sub uw CIHL RS232 RS232 12 B.uo.o 10 13 USB Internet
****** Page 20 ****** 10 2 3 4 5 6 7 Video output 7 5 DVD player, Set- top Box, HDTV recæever DVD player 11 2 O 3 12 t…………………..l use escriptlon Power cord VGA cable Audio cable jack/jack VGA to component/HDTV adapter 3 RCA component cable S-Video cable Composite video cable 10 8 9 10 11 12 13 14 Description Audio cable jack/RCA RS232 cable USB cable HDMI cable MHL cable (MicroUSB to HDMI) RJ45 cable USB cable for charging device Note: To ensure the projector works well with your comp uter, please make sure the timing of the display mode is compatible with the projector. Note: Functions vary depending on model definition. Note: USB cable needs powered extender if the length is over 5 m. Note: VGA OUT loops through for VGA IN 2 only. Note: Some smartphones require a converter (supplied by smartphone maker) to enable the MHL function.
****** Page 21 ****** 11 Turning the Projector On/Off Turning on the Projector 1 2 3 Ensure that the power cord and signal cable are securely connected. The Power indicator LED will flash red. Turn on the projector by pressing “Power” button on the control panel or remote control, and the Power indicator LED will turn blue. Turn on your source (computer, notebook, video player ,etc.). The projector will detect your source automatically. If the screen displays i’ Lock” and “Source” icons, it means the projector is locked onto a specific source type and there is no such type of input signal detected If the screen displays i’ No Signal”, please make sure the signal cables are securely connected. If you connect to multiple sources at the same time, use the “Source” button on either control panel or the remote control or direct source key on the remote control to switch between inputs. Power button
****** Page 22 ****** 12 Turning the projector off 1 2 3 4 5 To turn the projector off, press and hold the power button. This message appears: “Please press the power button again to complete the shutdown process.” Press the power button again. The LED power indicator will turn RED and blink rapidly after the projector is turned off, and the fan(s) will continue to operate for about 2 minutes to ensure that the system cools properly. (only supported under “lnstant Resume” mode) As long as the power cord remains plugged in, you can press the power button to turn the projector immediately back on anytime during the 2- minute shutdown process. (only supported under “lnstant Resume” mode) Once the system has finished cooling, the LED power indicator will stop blinking and turn solid red to indicate standby mode. It is now safe to unplug the power cord. Warning indicators: “Projector Overheated. Lamp will automatically turn off soon.” This onscreen message indicates that the projector has overheated. The lamp with automatically turn off, the projector will automatically shut down, and the LED temp indicator will turn solid red. Contact your local dealer or service center. “Fan failed. Lamp will automatically turn off soon.” This onscreen message indicates that the fan has failed. The lamp will automatically turn off, the projector will automatically shut down, and the LED temp indicator will blink. Contact your local dealer or service center. Note: Whenever the projector automatically shuts down and the LED lamp indicator turns solid red, contact your local reseller or service center. Note: Functions vary depending on model definition.
****** Page 23 ****** 13 Adjusting the Projected Image Adjusting the Height of Projected Image The projector is equipped with elevator feet for adjusting the height of image. To raise/lower the image: Use Tilt adjusting wheel to fine-tune the display angle. Tilt adjusting wheel
****** Page 24 ****** 14 How to optimize image size and distance Consult the table below to find the optimal image sizes achievable when the projector is positioned at a desired distance from the screen. XGA series If the projector is 2.0 m from the screen, good image quality is possible for image sizes between 51 i’ and 62″ Note: Remind as below figure, the space of 108 cm height is required when located at 2.0 m distance. a *screen size Height 90 cm c Height: 108 c from base to op of image 2.0 m Desired Dista nce Top Screen size Desired (Min zoom) Distance Screen size Top (m) Diagonal From base to top W (cm) x (Max zoom) Diagonal From base to top (inch) 1.5 38 2.0 51 2.5 64 3.0 77 3.5 90 4.0 103 4.5 115 5.0 128 5.5 141 6.0 154 6.5 167 7.0 179 9.0 231 10.0 256 Zoom Ratio: 1 2x (cm) 78 x 59 104 78 130 x 98 156K 117 182K 137 208K 156 234 x 176 260K 195 286 x 215 313 x 234 339 x 254 365 x 273 469 x 352 521 x 391 of image (cm) 67 90 112 135 157 180 202 225 247 270 292 314 404 449 (inch) 46 62 77 92 108 123 138 154 169 185 200 215 277 308 W (cm) x H (cm) 94 x 70 125 x 94 156 x 117 188 x 141 219 x 164 250 x 188 281 x 211 313 x 234 344 x 258 375 x 281 406 x 305 438 x 328 563 x 422 625 x 469 of image (cm) 81 108 135 162 189 216 243 270 296 323 350 377 485 539
****** Page 25 ****** 15 WXGA series If the projector is 2.0 m from the screen, good image quality is possible for image sizes between 60″ and 73″ Note: Remind as below figure, the space of 110 cm height is required when located at 2.0 m distance. Height: 110 cm from bas to t: top of i age Screen size ax screen size siee 2.0 m Desired Distance Top B Héig 91 c Desired Distance (Min zoom) From base Screen size (Max zoom) (m) Diagonal Diagonal to top of (inch) W (cm)x H (cm) (inch) W (cm)x H (cm) 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.3 45 60 76 91 106 121 136 151 166 181 196 212 227 251 98 x 61 130 x 81 163 x 102 195 x 122 228 x 142 260 x 163 293 x 183 326 x 203 358 x 224 391 x 244 423 x 264 456 x 285 488 x 305 540 x 338 image (cm) 69 91 1 14 137 160 183 206 229 252 274 297 320 343 380 54 73 91 109 127 145 163 181 199 218 236 254 272 301 117 x 73 156 x 98 195 x 122 234 x 146 273 x 171 313 x 195 352 x 220 391 x 244 430 x 269 469 x 293 508 x 317 547 x 342 586 x 366 648 x 405 Top From base to top of image (cm) 82 110 137 165 192 220 247 274 302 329 357 384 412 456 Zoom Ratio: 1 2x
****** Page 26 ****** 16 1080p series (P5515/N 156/PN-805) If the projector is 3 m from the screen, good image quality is possible for image sizes between 93 JJ and 127″. Note: Remind as below figure, the space of 183 cm height is required when located at 3 m distance. ax screen Size Screen size Desired Dista nce Top 127., Heig 135 c Screen size Height: 18 cm from base otop t- Of image Top Desired Distance (Min zoom) From ase to (Max zoom) (m) Diagonal Diagonal From base to top W (cm)x H top of image 1.3 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7.1 (inch) 55 63 85 106 127 148 169 190 211 233 254 275 300 W (cm) x (cm) 122 x 68 140 x 79 187 x 105 234 x 132 281 x 158 328K 184 375 x 211 421 x 237 468 x 263 515 x 290 562K 316 609 x 342 665 x 374 of image (cm) 70 92 122 153 183 214 244 275 305 336 367 397 434 Zoom Ratio: (inch) 40 47 62 78 93 109 125 140 156 171 187 202 221 1.36x (cm) 90 x 50 103 x 58 138 x 78 172 x 97 207 x 116 241 x 136 276 x 155 310x 174 345 x 194 379 x 213 414 x 233 448 x 252 489 x 275 (cm) 58 67 90 112 135 157 180 202 225 247 270 292 319
****** Page 27 ****** 17 1080p series (1-46517BD/E 145 D/HE-80 IJ) If the projector is 3 m from the screen, good image quality is possible for image sizes between 84″ and 92″. Note: Remind as below figure, the space of 132 cm height is required when located at 3 m distance. screen Size Zoom Ratio: 840 H 1 Desired Distance ight 1 cm Height: 13 cm from base otop of image Top Desired Distance Screen size (Min zoom) Top Screen size (Max zoom) From ase to (m) Diagonal Diagonal From base to top 1.5 2 2.5 3 3.5 4 4.5 5 6 7 8 9 10 (inch) 42 56 70 98 112 125 139 167 195 223 251 279 1.1x W (cm)x H top of image (cm) 93 x 52 123 x 69 154 x 87 185 x 104 216 x 122 247 x 139 278x 156 309 x 174 370 x 208 432 x 243 494 x 278 556 x 313 617 x 347 (cm) 60 81 101 121 141 161 181 201 242 282 322 363 403 (inch) 46 61 76 92 107 122 137 153 183 214 244 275 305 W (cm) x (cm) 101 x57 135 x 76 169 x 95 203 x 114 236 x 133 270k 152 304 x 171 338k 190 405 x 228 473 x 266 541 x 304 608 x 342 676 x 380 of image (cm) 66 88 110 132 154 176 198 220 265 309 353 397 441
****** Page 28 ****** 18 1080p series (1-465 17ST/E 145S/HE-801ST) If the projector is 1.5 m from the screen, good image quality is possible for image sizes 136″ Note: Remind as below figure, the space of 196 cm height is required when located at 1.50 m distance. see 1.50 m Desired Distance Screen size (zoom) Height: 196 cm Top Desired Distance (m) 0.50 0.75 1.00 1.25 1.50 1.75 2.00 2.25 2.50 2.75 3.00 3.25 3.35 Zoom Ratio: 1.0x Diagonal (inch) 45 68 91 113 136 158 181 204 226 249 272 294 303 W (cm)x H (cm) 100 x 56 150 x 85 200K 113 251 x 141 301 x 169 351 x 197 401 x 225 451 x 254 501 x 282 551 x 310 601 x 338 351 x 366 671 x 378 From base to top of image (cm) 65 98 131 163 196 229 262 294 327 360 392 425 438
****** Page 29 ****** 19 How to get a preferred image size by adjusting distance and zoom The table below shows how to achieve a desired image size by adjusting either the position or the zoom ring XGA series To obtain an image size of 50″ set the projector at a distance 1.6 m and 2.0 m from the screen. 2.0 m c Desired Image Size Desired image size Desired Distance Distance (m) Diagonal (inch) Max zoom Min zoom 38 40 50 60 70 80 90 100 120 150 180 250 300 307 Zoom Ratio: W (cm) x H (cm) 77 x 58 81 x 61 102 x 76 122 x 91 142 x 107 163 x 122 183 x 137 203 x 152 244 x 183 305 x 229 366 x 274 508 x 381 610 x 457 624 x 468 1.2x 1.2 1.3 1.6 2.0 2.3 2.6 2.9 3.3 3.9 4.9 5.9 8.1 9.8 10.0 1.5 1.6 2.0 2.3 2.7 3.1 3.5 3.9 4.7 5.9 7.0 9.8 11.7 12.0 Height: 88 cm from base to top ,of image Top (cm) From base to top of mage 67 70 88 105 123 140 158 175 210 263 315 438 526 538
****** Page 30 ****** 20 WXGA series To obtain an image size of 60″ from the screen. set the projector at a distance 1.7 m and 2.0 m 2.0 m c Desired Image Size 60 ” Desired mage Size 1.7 Ji Desired Distance Distance (m) Diagonal (inch) 45 50 55 60 70 80 90 100 120 150 200 250 300 Zoom Ratio: W (cm) x H (cm) 97 x 61 108 x 67 118k 74 129 x 81 151 x 94 172x 108 194x 121 215 x 135 258x 162 323 x 202 431 x 269 538 x 337 646 x 404 Max zoom 1.2 1.4 1.5 1.9 2.2 2.5 2.8 3.3 4.1 5.5 6.9 8.3 Min zoom 1.5 1.7 1.8 2.0 2.3 2.6 3.0 3.3 4.0 5.0 6.6 8.3 9.9 Height: 1 cm from base otop of image Top (cm) From base to top of mage 68 76 83 91 106 121 136 151 182 227 303 378 454 1.2x
****** Page 31 ****** 21 1080p series (P5515/N 156/PN-805) To obtain an image size of 60″ set the projector at a distance 1.4 m and 1.9 m from the screen. 1.9m Desired Image Size Desired mage Size Desired Distance Distance (m) Diagonal (inch) 40 50 60 70 80 90 100 120 150 180 200 250 300 Zoom Ratio: W (cm) x H (cm) 89 x 50 111 x 62 133 x 75 155 x 87 177 x 100 199x 112 221 x 125 266x 149 332 x 187 398 x 224 443 x 249 553×311 664 x 374 Max zoom 0.9 2.4 2.8 3.5 5.9 Min zoom 2.2 2.6 2.9 3.2 3.9 4.8 5.8 8.0 Height: 8 cm from base t top of mage Top (cm) From base to top of mage 58 72 87 101 116 130 144 173 217 260 289 361 433 1.36x
****** Page 32 ****** 22 1080p series (1-46517BD/E 145 D/HE-80 IJ) To obtain an image size of 50″ set the projector at a distance 1.6 m and 1.8 m from the screen. 1.8m Desired Image Size Desired mage size Desired Distance Distance (m) Diagonal (inch) 41.8 50 60 70 80 90 100 120 150 180 200 250 305 Zoom Ratio: 1. lx W (cm) x H (cm) 93 x 52 111 x 62 133 x 75 155 x 87 177 x 100 199x 112 221 x 125 266x 149 332 x 187 398 x 224 443 x 249 553×311 675 x 380 Max zoom 2.0 2.3 2.6 2.9 3.3 3.9 4.9 5.9 6.6 10.0 Min zoom 2.2 2.5 2.9 3.2 3.6 6.5 7.2 9.0 Height: 2 cm from base t top of I mage Top (cm) From base to top of mage 60 72 87 101 116 130 173 217 260 289 361 441
****** Page 33 ****** 23 User Controls Installation menu The installation menu provides an onscreen display (OSD) for projector installation and maintenance. Use the OSD only when the message “No signal input” is displayed on the screen. The menu options include settings and adjustments for screen size and distance, focus, keystone correction and more 1 2 3 4 Turn on the projector by pressing ” Power” button on the control pad. Press the ” MENU” button on the remote control to launch the OSD for projector installation and maintenance. Enii’h The background pattern acts as a guide to adjusting the calibration and alignment settings, such as screen size and distance, focus and more . The Installation menu includes the following options: •Projection method •Projection Mode •Projection Location •Auto Keystone settings •Manual Keystone settings •H. Keystone •V. Keystone •LANM/iFi •LAN •LAN IP/Mask •USB Display •Language settings •WirelessHD Dongle Paring
****** Page 34 ****** 24 5 •Reset to factory default function Use the up and down arrow keys to select an option, the left and right arrow keys to adjust selected option settings, and the right arrow key to enter a submenu for feature setting. The new settings will be saved automatically upon exiting the menu. Push the MENU button anytime to exit the menu and return to the Acer welcome screen. Note: Functions vary depending on model definition.
****** Page 35 ****** 25 Onscreen Display (OSD) Menus The projector has multilingual OSD that allow you to make image adjustments and change a variety of settings. Using the OSD menus To open the OSD menu, press “MENU” on the remote control or control panel. When the OSD is displayed, use the A v keys to select any item in the main menu. After selecting the desired main menu item, press to enter submenu for feature setting Use the A v keys to select the desired item and adjust the settings by using the < keys. Select the next item to be adjusted in the submenu and adjust as described above. Press " MENU" on the remote control or control panel, the screen will return to the main menu. To exit OSD, press "MENU" on the remote control or control panel. The OSD menu will close and the projector will automatically save the new settings. Main menu ABC Color Display Mode wall Color Brightness Contrast Saturation Color Temperature Oynamc Black Gamma ACN nced Select Sub menu 50 so Adjust Video Press press Wenu Setting Note: Some of the following OSD settings may not be available. Please refer to the actual OSD of your projector. Note: Functions vary depending on model definition. ****** Page 36 ****** 26 Color Display Mode Wall color Brightness Contrast Saturation Tint There are many factory presets optimized for various types of mages. Bright: For brightness optimization. Presentation: For meeting presentation. Standard: For common environment. Video: For playing video in a bright environment. Game: For game content. Education: For education environment. Movie: For brighter and general movie/video/photo playing Dark Cinema: For dark movie content. Sports: For sport picture. User: Memorize user's settings. Use th is function to choose a proper color according to the wall. There are several choices, including wh ite, light yellow, light blue, pink, dark green. It will compensate the color deviation due to the wall color to show the correct image tone. Adjust the brightness of the image. Press to darken the image. Press to lighten the image. "Contrast" controls the difference between the lightest and darkest parts of the picture. Adjusting the contrast changes the amount of black and white in the image. Press < to decrease the contrast. Press to increase the contrast. Adjusts a video image from black and white to fu Ily saturated color. Press 0″ increase noise reduction. Black Extension This ensures optimum black level for each analog source. Note: “Saturation and “Tint” functions are not supported under computer or HDMI mode. Note: Functions vary depending on model definition.
****** Page 38 ****** 28 Image Projection Projection Mode Projection Location Aspect Ratio Auto Keystone Manual Keystone Front-Desktop: The factory default setting Rear-Desktop: When you select th is function, the projector reverses the image so you can project from behind a translucent screen. Rear-Ceiling: When you select this function, the projector reverses and inverts the image at same time. You can project from behind a translucent screen with ceiling mounted projection. Front-Ceiling: When you select this function, the projector Inverts the image for ceiling-mounted projection. Front: The factory default setting. Rear: Reverses the image so you can project from behind a translucent screen. Auto: Automatically adjusts projection location of image. Desktop Ceiling: Turns the image upside down for ceiling-mounted projection. Use this function to choose your desired aspect ratio. Auto: Keep the image with original width-higth ratio and maxi mize the image to fit native horizontal or vertical pixels. Full: Resize image to fit full screen by width (1280 pixels) and height (800 pixels) 4:3: The image will be scaled to fit the screen and displayed using a 4:3 ratio. 16:9: The image will be scaled to fit the width of the screen and the height adjusted to display the image using a 16:9 ratio. L.Box: Keep original signal aspect ratio and zoom in by 1.333 times. Automatically adjusts vertical image. Adjust image distortion caused by tilting projection. The Manual Keystone function is unavailable under Auto Keystone setting to “On .
****** Page 39 ****** H.N. Keystone 4 Corner Correction Sharpness H. Position (Horizontal position) V. Position (Vertical position) Frequency Tracking 29 Auto V. Keystone Automatically adjusts vertical image. H. Keystone Press the or button to adjust image distortion horizontally and makes a squarer image. V. Keystone Press the < or button to adjust image distortion vertically and makes a squarer image. Manually adjusts the shape and size of an image that is uneven ly rectangular on all sides. Press "MODE" repeatedly to select the corner that you wish to adjust. Press four directional selection keys to adjust the image shape. The function is unavailable when H] V. Keystone is adjusted Adjusts the sharpness of the image. Press Press Press Press Press Press to decrease the sharpness. to increase the sharpness. to move the image left. to move the image right. to move the image down. to move the image up. “Frequency” changes the projector’s refresh rate to match the frequency of your computer’s graphics card. If you can see a vertical flickering bar in the projected image, use this function to make the necessary adjustments. Synchronizes the signal timing of the projector with the graphics card If you experience an unstable or flickering image, use th is function to correct it. HDMI Color Range Adjust the color range of the HDMI image data to correct color display error. Auto: Automatically adjust by information from player. Limited Range: Prosess the input image as limited color range data. Full Range: Prosess the input image as full color range data. HDMI Scan Info Adjust the overscan ratio of the HDMI image on screen. Auto: Automatically adjust by information from player. Underscan: Always no overscan on HDMI image. Overscan: Always keep overscan on HDMI image.
****** Page 40 ****** 30 Note: “H. Position”, “V. Position”, “Frequency” and “Tracking” functions are not supported under HDMI or Video mode. Note: “HDMI Color Range” and “HDMI Scan Info” functions are only supported under HDMI mode. Note: Functions vary depending on model definition.
****** Page 41 ****** Setting Startup Screen Screen Capture Source Lock Closed Caption VGA OUT (Standby) WirelessHD Dongle Paring Reset Security 31 Use th is function to select your desired startup screen. If you change the setting, the changes will take effect when you exit the OSD menu. • Acer: The default startup screen of your Acer projector. User: Use memorize picture from “Screen Capture” function. Use th is function to customize the startup screen. To capture the image that you want to use as the startup screen, follow the instructions below. Notice: Before proceeding with the following steps, make sure that the ” Keystone” is set to the default value 0 and the aspect ratio is set to 4:3. For details, refer to the ” Image” section. Change the “Startup Screen ” from the default setting “Acer” to ” User” Press “Screen Capture” to customize the startup screen. A dialog box appears to confirm the action. Choose “Yes” to use the current image as your custom ized startup screen. The capture range is the red rectangular area. Choose ” No” to cancel the screen capture and exit the onscreen display (OSD). A message appears, stating that the screen capture is in progress. When the screen capture is finished, the message disappears and the original display is shown. The customized startup screen, as shown below, takes effect when there is a new input signal or when you restart the projector. When Source Lock is turned “Off”, the projector will search for other signals if the current input signal is lost. When Source Lock is turned “On”, it will “lock” the current source channel unless you press “Source” button on the remote control for the next channel. Selects a preferred closed caption ing mode from CCI, CC2, CC3, CC4, (CCI displays captions in the primary language in your area). Select “Off” to turn off the captioning feature. This function is on ly available when a composite video or S-Video input signal is selected and its system format is NTSC. Set your screen aspect ratio to 4:3. This function is not available when the aspect ratio is ” 16:9″ or “Auto” . Default is “Off” . Choose “On ” to enable VGA OUT connection. Default is “No” . Select “Yes” to do WirelessHD (WiHD) dongle pairing. Press the button and choose “Yes” to return the parameters on all menus to the factory default settings. Security Th is projector provides a useful security function for the admin istrator to manage usage of the projector . Press to change the “Security” setting. If the security function is enabled, your must enter the “Admin istrator Password” first before changing the security settings. Select “On ” to enable the security function. The user has to enter a password to operate the projector. Please refer to the ‘User Password” section for details. If “Off” is selected, then the user can turn on the projector without password.
****** Page 42 ****** 32 LAN/Control Channel Timeout(Min.) Once “Security” is activated to ” On”, the administrator can set timeout function. Press or to select the timeout interval. The range is from 10 minute to 990 minutes. When the time is up, the projector will prompt the user to enter the password again. The factory default setting of “Timeout(Min.)” is “Off” . Once the security function is enabled, the projector will request user to enter password when switch on the projector . Both “User Password” and “Administrator Password” can be accepted for this dialogue. User Password Press to setup or change the ” User Password”. Press number keys to set your password on the remote control and press “MENU” to confirm. Press IPÅddress 1 1K o.n.o: Sub-et u Gateway .N.nm.rs: Password Setting password Confirm Password Passwocd Confirm Password Note: Group Name and projector Name must be less then 32 characters. Alert Setting Enduser can send mail with error message right away if projector has problem. Acer I Control Panel I Netwo& Setting Alert – ‘l I ogout Entail Seffng Fnyt SMTP setting Seve• l] Alert Condition • Over lem•pctat..te Htus Zurnr»; Cut
****** Page 49 ****** 39 Logout After tap Logout, you will return to login page within 5 seconds. Acer Projector Web Server – I Control Panel Logout! Note: Functions vary depending on model definition
****** Page 50 ****** 40 Appendices Troubleshooting If you experience a problem with your Acer projector, refer to the following troubleshooting guide. If the problem persists, please contact your local reseller or service center. Image Problems and Solutions 2 Problem No image appears onscreen Partial, scrolling or incorrectly displayed image (for PC (Windows 2000/XPNista/ Windows 7/ Windows 8)) Solution Connected as described in the “Getting Started” section. Ensure none of the connector pins are bent or broken. Check if the projector lamp has been securely installed. Please refer to the “Replacing the Lamp ” section. Make sure you have removed the lens cap and the projector is switched on. Press “RESYNC” on the remote control. For an incorrectly displayed image: Open “My Computer”, open the “Control Panel”, and then double-click the “Display” Icon. Select the ” Settings” tab. Verify that your display resolution setting is lower than or equal to WUXGA-RB (1920 x 1200). Click the “Advanced Properties” button. If the problem still appears, change the monitor display you are using and follow the steps below: Verify that the resolution setting is lower than or equal to WUXGA-RB (1920 x 1200). Click the “Change” button under the ” Mon itor” tab. Click “Show all devices”. Next, select “Standard mon itor types” under the SP box, and choose the resolution mode you need under the ” Models” box. Verify that the resolution setting of the mon itor display is lower than or equal to WUXGA-RB (1920 x 1200).
****** Page 51 ****** 41 3 4 5 6 7 Partial, scrolling or incorrectly displayed image (For notebooks) The screen of the notebook computer is not displaying your presentation Image is unstable or flickering Image has vertical flickering bar Image is out of focus Press “RESYNC” on the remote control. For an incorrectly displayed image: Follow the steps for item 2 (above) to adjust the resolution of your computer. Press the toggle output settings. Example: [Fn]+[F4], Compaq Dell Gateway IBM HP NEC Tosh iba If you experience difficulty changing resolutions or your monitor freezes, restart all equipment including the projector. If you are using a Microsofte Windows@ based notebook: Some notebook PCs may deactivate their own screens when a second display device is in use. Each has a different way to be reactivated. Refer to your computer’s manual for detailed information. If you are using an Applee Mace OS based notebook: In System Preferences, open Display and select Video Mirroring “On” Adjust the “Tracking” to correct it. Refer to the ” Image” section for more information. Change the display color depth settings on your computer. Use “Frequency” to make an adjustment. Refer to the ” Image” section for more information. Check and reconfigure the display mode of your graphics card to make it compatible with the projector. Make sure the lens cap is removed. Adjusts the focus ring on the projector lens. Make sure the projection screen is within the required distance of 4.9 to 32.0 feet (1.5 to 9.8 meters) (XGA series) / 4.9 to 27.1 feet (1.5 to 8.3 meters) (WXGA series) / 1.6 to 10.9 feet (0.5 to 3.3 meters) (1080m 1-46517ST/E 145S/HE-801ST series) / 4.9 to 32.2 feet (1.5 to 9.8 meters) (1080p, 1-46517BD/ E 145D/HE-801J series) 14.3 to 23.3 feet (1.3 to 7.1 meters) (1080p, P5515/N 156/PN-805 series) from the projector. Refer to the ” How to Get a Preferred Image Size by Adjusting Distance and Zoom ” section for more information.
****** Page 52 ****** 42 8 9 10 11 Image is stretched when displaying a ” widescreen DVD title Image is too small or too large Image has slanted sides Image is reversed When you play a DVD encoded in anamorphic or 16:9 aspect ratio you may need to adjust the following settings: If you play a 4:3 format DVD title, please change the format to 4:3 in the projector OSD. If the image is still stretched, you will also need to adjust the aspect ratio. Set up the display format to 16:9 (wide) aspect ratio on your DVD player. If you play an Letterbox (LBX) format DVD title, please change the format to Letterbox (LBX) in the projector OSD. Adjust the zoom lever on the top of the projector. Move the projector closer to or further from the screen. Press “MENU” on the remote control. Go to “Image – -> Aspect Ratio” and try different settings or press ” RATIO” on the remote control to adjust directly. If possible, reposition the projector so that it is centered on the screen. Press the Keystone / button on the remote control until the sides are vertical. Press “MENU” on the remote control. Go to “Image – -> Auto Keystone” and choose “Off” on the OSD, if ” Keystone” button is not available on the remote control. Select “Image –> Projection ” on the OSD and adjust the projection direction.
****** Page 53 ****** OSD Messages Condition Message • 43 Message Reminder Fan Fail – the system fan is not working Fan Fail. Lamp will automatically turn of soon. Projector Overheated – the projector has exceeded its recommended operating temperature and must be allowed to cool down before it may be used. Please check the following message. Projector overheated, system will turn off automatically soon, please: I, Check If operation amblent temperature between 5 degree and 40 degree, 2. Check if filter needs to be cleaned. 3. Check if inlet or outlet is blocked. 4. Check if high altitude mode is set when the projector operating at high altitude area. Please also check the dust filters if they are installed. If the dust filter is clogged with dust, please clean it. Please refer to “Clean ing and replacing the dust filter” for details. • Replace the lamp – the lamp is about to reach its maximum lifetime. Prepare to replace it soon. Lamp is approaching the end of its useful life in full power operation. Problems with the Projector 2 Condition The projector stops responding to all controls Lamp burns out or makes a popping sound Replacement suggested! Solution If possible, turn off the projector, then unplug the power cord and wait at least 30 seconds before reconnecting power. When the lamp reaches the end of its useful life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn on until the lamp module has been replaced. To replace the lamp, follow the procedures in the “Replacing the Lamp” section.
****** Page 54 ****** 44 LED & Alarm Definition Listing LED Messages Message Input power plug Standby Power button ON Lamp retry Power off (Cooling state) Power button OFF (cooling completed; standby mode) Error (thermal failure) Error (fan lock) Error (lamp breakdown) Error (color wheel fail) Lamp_LED Red Flash ON to OFF IOOms ON Qu ick Flashing Temp_LED Red Flash ON to OFF IOOms ON Qu ick Flash ing Power LED Red Flash ON to OFF IOOms ON Quick Flashing ON Blue ON Qu ick Flashing ON ON ON ON
****** Page 55 ****** 45 Cleaning and replacing the dust filters Cleaning the dust filters Clean the dust filters after every 1000 hours of use. If they are note cleaned periodically, they can become clogged with dust, preventing proper ventilation. This can cause overheating and damage the projector. 2 1 Follow these steps: 1 2 3 4 5 Turn the projector off. Wait for the Power LED to stop flashing then unplug the power cord Allow the projector at least 30 mins to cool down. Pull out the dust filter. (Illustration #1) To clean the dust filters, use a small vacuum cleaner designed for computers and other office equipment. (Illustration #2) If the dirt is difficult to remove or the filter is broken, please contact your local dealer or service center to obtain a new filter.
****** Page 56 ****** 46 Replacing the Lamp Use a screwdriver to remove the screw(s) from the cover, and then pull out the lamp. The projector will detect the lamp life. You will be shown a warning message ” Lamp is approaching the end of its useful life in full power operation. Replacement suggested! ” When you see this message, change the lamp as soon as possible. Make sure the projector has been cooling down for at least 30 minutes before changing the lamp. Warning: The lamp compartment is hot! Allow it to cool down before changing the lamp. 2 1 3 6 5 To Change the Lamp Turn off the projector by pressing the Power button. Allow the projector at least 30 minutes to cool down. Disconnect the power cord. 1 2 3 Use a screwdriver to remove the screw from the cover. (Illustration #1) Push up and remove the cover. (Illustration #2) Remove the screw that secure the lamp module. (Illustration #3) Pull out the lamp plug. (Illustration #4) Lift the handle so that it stands up. (Illustration #5) Lift the handle so that it stands up. Pull out the lamp module by force. (Illustration #6) To replace the lamp module, use a new lamp and reverse the above steps. Warning: To reduce the risk of personal injury, do not drop the lamp module or touch the lamp bulb. The bulb may shatter and cause injury if it is dropped.
****** Page 57 ****** 47 Ceiling Mount Installation If you wish to install the projector using a ceiling mount, please refer to the steps below: 1 2 Drill four holes into a solid, structurally sound part of the ceiling, and secure the mount base. Note: Screws are not included. Please obtain the appropriate screws for your type of ceiling 3 3 Secure the ceiling rod using the appropriate type of four-cylinder screws. Short Rod O O o 0 Screw Type A 50 mm length 18 mm diameter – Ceiling Mount Base – Attach toceiling Long Rod Extension Rod Long Cylinder Cap Allen Key – For tightening/osening Tightening Screw Medium Rod
****** Page 58 ****** 48 3 4 Use the appropriate number of screws for the projector size to attach the projector to the ceiling mount bracket. Smaller Washer Large Washer Projector Bracket Supports projector and allows for adjustments To Screw Type B Spacer – For heat dissipation Note: It is recommended that you keep a reasonable space between the bracket and the projector to allow for proper heat distribution. Use two washers for extra support, if deemed necessary. Attach the ceiling bracket to the ceiling rod Screw Type A 50 mm length/ 8 mm diameter Large cylinder cap Allen Key – For tightening/loosening Tightening Screw
****** Page 59 ****** 5 49 Adjust the angle and positioning as necessary. Tightening Screw Allen Key 3600 Allen Key Tightening Screw Note: The appropriate type of screw and washer for each model is listed in the table below. 4 mm diameter screws are enclosed in the screw pack. Screw Type B Washer Type Diameter (mm) 4 Length (mm) 25 SCREW SPEC. M4 x 25 mm Large o o 55.00 mm 85.00 mm Small 3 3
****** Page 60 ****** 50 Specifications The specifications listed below are subject to change without notice. For final specs, please refer to Acer’s published marketing specifications. Projection system Resolution Computer compatibility Video compatibility Aspect ratio Displayable colors Projection lens Projection screen size (diagonal) DLP@ P1287/M416/PE-X45 series: Native 1024 x 768 XGA resolution P1387W/M426/PE-W45 series: Native 1280 x 800 WXGA resolution • P5515/N156/PN-805/H6517BD/E145D/HE-801J/ H6517ST/E145S/HE-801ST series: 1920k 1080 1080p resolution • Maximum: UXGA (1600 x 1200), WSXGA+ (1680×1050), 1080p(1920×1080), WUXGA-RB (1920 x 1200) IBM PC and compatibles, Apple Macintosh, iMac and VESA standards: SXGA, XGA, VGA, SVGA, SXGA+, WXGA, WXGA+, WSXGA + NTSC (3.58/443), PAL (B/D/G/H/I/WN), SECAM (B/D/G/ K/KI/L), HDTV (720p, 1080i, 1080p), EDTV (480p, 576p), SDTV (480i, 576i) Full, 4:3, 16:9, L Box 16.7 million colors P1287/M416/PE-X45/P 1387W/M426/PE-W45 series: f 2.41 2.70, f 18.17 mm 21.81 mm, 1.2x manual zoom and manual focus 146517ST/E145S/HE-801ST series: F = 2.80, f = 7.42 mm, 1.0x manual zoom and manual focus H6517BD/E 145D/HE-801J series: F = 2.5 2.67, f 21.90mm 24.00mm, 1:1.1 Manual Zoom and Manual Focus P5515/N 156/PN-805 series: F = 2.5 2.93, f — 15.98mm 21.42mm, 1:1.4 Manual Zoom and Manual Focus P1287/M416/PE-X45 series: 38″ (98 cm) 300″ (762 cm) P 1387W/M426/PE-W45/H6517ST/E145S/HE-801ST series: 45″ (115m) 300″ (762cm) 146517BD/E 145D/HE-801J series: 42″ (106cm) 300″ (762cm) P5515/N 156/PN-805 series: 40″ (103cm) 300″ (762cm)
****** Page 61 ****** Projection distance Throw ratio Horizontal scan rate Vertical refresh scan rate Lamp type Keystone correction Audio Weight Dimensions (W x D x H) Digital Zoom Power supply Power consumption 51 P1287/M416/PE-xa5 series: 4.9′ (1.5 m) 32.0′ (9.8 m) P1387W/M426/PE-W45 series: 4.9′ (1.5m) 27.1′ (8.3m) 146517ST/E145S/HE-801ST series: 1.6′ (0.5m) 10.9′ (3.3m) 146517BD/E 145D/HE-801J series: 4.9′ (1.5m) 32.2′ (9.8m) • P5515/N156/PN-805 series: 4.3′ (1.3m) 23.3′ (7.1m) P1287/M416/PE-X45 series: 62 “@2m (1.60 1.92:1) P1387W/M426/PE-W45 series: 73 “@2m (1.28 1.54:1) 146517ST/E145S/HE-801ST series: (0.50 0.50:1) 146517BD/E 145D/HE-801J series: (1.48 1.62:1) P5515/N 156/PN-805 series: 85 ’02m (1.07 1.45:1) 15 – 100 kHz 24- 120 Hz • P1287/M416/PE-X45/P1387W/M426/PE-W45/P5515/ N 156/PN-805 series: 260 W user-replaceable lamp 146517ST/E145S/HE-801ST/H6517BD/E145D/HE-801J series: 210W user-replaceable lamp • P1287/M416/PE-X45/P1387W/M426/PE-W45/ 146517ST/E145S/HE-801ST/H6517BD/E145D/HE-801J series: ±40 degrees P5515/N 156/PN-805 series: degrees • P1287/M416/PE-X45/P1387W/M426/PE-W45/P5515/ N156/PN-805 series: Internal speaker with 10 W output 146517ST/E145S/HE-801ST/H6517BD/E145D/HE-801J series: Internal speaker with 2 W output 2.5 3.0 Kg (5.51 6.61 lbs) 314 mm X 223.4 mm X 93.4 mm (12.4″ x 8.8″ x 3.7”) AC input 100 – 240 V auto-switch ing power supply P1287/M416/PE-X45/P 1387W/M426/PE-W45 series: Normal mode: 330W ± @ 1 IOVAC ECO mode: ± @ IIOVAC Standby mode < 0.5W 146517ST/E145S/HE-801ST/H6517BD/E145D/HE-801J series: Normal mode: 255W ± @ IIOVAC ECO mode: 196W± @ IIOVAC Standby mode: < 0.5W P5515/N 156/PN-805 series: Normal mode: 325W ± @ IIOVAC ECO mode: now ± @ IIOVAC Standby mode < 0.5W Network standby mode: <3W ****** Page 62 ****** 52 Operating temperature Standard package contents OOC to aooc / to 1040F AC power cord xl • VGA cable xl Remote control xl Battery x2 (for remote control) (option) User's gu ide (CD-ROM) xl Quick start guide xl Security card xl Carrying case xl (option) 1/0 connectors Power socket DC Jack VGA IN VGA IN 1 VGA IN 2 VGA output 3.5 mm audio jack input 1 S-Video Composite video 3.5 mm audio jack input 2 3.5 mm audio jack output RJ45 LAN input RS232 HDMI [MHL HDMI Mini USB xl (for firmware upgrade) P 1287/ M416/PE-X45/ P 1387M M426/PE-W45 x x x x P5515/N156/ P N-805 x x x H6517BD/E 145D/HE-801J/ H6517ST/E145S/HE-801ST x x x x x x x x x Note: Design and specifications are subject to change without notice. ****** Page 63 ****** Compatibility modes A. VGA Analog VGA Analog PC Signal 1 Modes VGA SVGA XGA SXGA QuadVGA SXGA+ UXGA PowerBook G4 PowerBook G4 PowerBook G4 PowerBook G4 PowerBook G4 PowerBook G4 i Mac DV (G3) Resolution 640×480 640×480 640×480 640×480 640×480 800×600 800×600 800×600 800×600 800×600 800×600 1024×768 1024×768 1024×768 1024×768 1024×768 1152×864 1 152×864 1 152×864 1280×1024 1280×1024 1280×1024 1280×1024 1280×960 1280×960 1400×1050 1600×1200 640×480 640×480 800×600 1024×768 1152×870 1280×960 1024×768 V.Frequency [Hz] 60 72 75 85 120 56 60 72 75 85 120 60 70 75 85 120 70 75 85 60 72 75 85 60 75 60 60 60 66.6(67) 60 60 75 75 75 53 H.Frequency [KHz] 31.5 37.9 37.5 43.3 61.9 35.1 37.9 48.1 46.9 53.7 77.4 48.4 56.5 60.0 68.7 99.0 63.8 67.5 77.1 64.0 77.0 80.0 91.1 60.0 75.2 65.3 75.0 31.4 34.9 37.9 484 68.7 75.0 60.0 ****** Page 64 ****** 54 2 3 1 VGA Analog – Extended Wide timing Modes WXGA WSXGA+ WUXGA VGA Analog Modes 480i 576i 480p 576p nop 720p 1080i 1080i 1080p 1080p 1080p *1080p Resolution 1280×768 1280×768 1280×768 1280×720 1280×720 1280×800 1280×800-RB *1920×1200 1440×900 1680×1050 1920×1080 (1080P) 1366×768 1920×1200-RB V.Frequency [Hz] 60 75 85 60 120 60 119.909 60 60 60 60 60 59.94 Component Signal Resolution 720×480(1440×480) 720×576(1440×576) 720×480 720×576 1280×720 1280×720 1920×1080 1920×1080 1920×1080 1920×1080 1920×1080 1920×1200 B. HDMI Digital HDMI PC Signal Modes VGA Resolution 640×480 640×480 640×480 V.Frequency [Hzl 59.94 (29.97) 50(25) 59.94 50 60 50 60(30) 50(25) 23.97/24 60 50 59.94 V.Frequency [Hzl 60 72 75 H.Frequency [KHz] 47.8 60.3 68.6 44.8 92.9 49.6 101.6 74 59.9 65.3 67.5 47.7 74.04 H.Frequency [KHz] 15.7 15.6 31.5 31.6 45.0 37.5 33.8 28.1 27.0 67.5 56.3 74.04 H.Frequency [KHz] 31.5 37.9 37.5 ****** Page 65 ****** SVGA XGA SXGA QuadVGA SXGA+ UXGA PowerBook G4 PowerBook G4 PowerBook G4 PowerBook G4 PowerBook G4 PowerBook G4 i Mac DV (G3) 640×480 640×480 800×600 800×600 800×600 800×600 800×600 800×600 1024×768 1024×768 1024×768 1024×768 1024×768 1152×864 1 152×864 1152×864 1280×1024 1280×1024 1280×1024 1280×1024 1280×960 1280×960 1400×1050 1600×1200 640×480 640×480 800×600 1024×768 1152×870 1280×960 1024×768 2 HDMI Extended Wide timing Modes WXGA Resolution 1280×768 1280×768 1280×768 1280×720 1280×720 1280×800 1280×800-RB 85 120 56 60 72 75 85 120 60 70 75 85 120 70 75 85 60 72 75 85 60 75 60 60 60 66.6(67) 60 60 75 75 75 V.Frequency [HzJ 60 75 85 60 120 60 119.909 55 43.3 61.9 35.1 37.9 48.1 46.9 53.7 77.4 48.4 56.5 60.0 68.7 99.0 63.8 67.5 77.1 64.0 77.0 80.0 91.1 60.0 75.2 65.3 75.0 31.4 34.9 37.9 48.4 68.7 75.0 60.0 H.Frequency [KHz] 47.8 60.3 68.6 44.8 92.9 49.6 101.6 ****** Page 66 ****** 56 3 4 WSXGA+ WUXGA 1440×900 *1920×1200 1680×1050 1920×1080 (1080P) 1366×768 1920×1200-RB HDMI Video Signal Modes 480i 576i 480p 576 720 nop 1080i 1080i 1080p 1080p 1080p *1080p Resolution 720×480(1440×480) 720×576(1440×576) 720×480 720×576 1280×720 1280×720 1920×1080 1920×1080 1920×1080 1920×1080 1920×1080 1920×1200 HDMI – 1.4a 3D Timing Modes 720 (Frame Packing) 720p (Frame Packing) 1080p (Frame Packing ) 720 (Frame Packin ) 720 (Frame Packin ) 1080i (Top and Bottom) 1080i (Top and Bottom) 1080 (To and Bottom) 1080p (Top and Bottom) 1080p (Top and Bottom) 720 (Sideb Side (Half)) 1080i (Sideb Side (Half)) 1080i (Side by Side (Half)) 1080p (Side by Side (Half) Resolution 1280 x 720 1280 x 720 1920 x1080 1280 x 720 1280 x 720 1920 x1080 1920 x1080 1920 x1080 1920 x1080 1920 x1080 1280 x 720 1920 x1080 1920 x1080 1920 x1080 60 60 60 60 60 59.94 V.Frequency [Hz] 59.94 (29.97) 50(25) 59.94 50 60 50 60(30) 50(25) 23.97/24 60 50 59.94 V.Frequency [Hz] 50 60 24 50 60 50 (25) 60 (30) 24 50 60 60 50 (25) 60 (30) 50 59.9 74 65.3 67.5 47.7 74.04 H.Frequency (KHz] 15.7 15.6 31.5 31.6 45.0 37.5 33.8 28.1 27.0 67.5 56.3 74.04 H.Frequency [KHz] 37.5 45.0 27.0 37.5 45.0 28.1 33.8 27 .o 56.3 67.5 45 .o 28.1 33.8 56.3 ****** Page 67 ****** 1080p (Sideb Side (Half) Graphic source monitor range limits C. MI-IL Digital Modes VGA 480i 15.7 576i 15.6 480p 480 2x 576p 576p 2K 720p nop 1080i 1080i 1080 1080 1080p Graphic source monitor 1920 x1080 60 Horizontal scan rate: Vertical scan rate: Max. ixel rate: V.Frequency 57 67.5 15k-100kHz 24-120 Hz 165 MHz H.Frequency [KHz] Resolution 640×480 720×480 (1440×480) 720×576 (1440×576) 720×480 1440×480 720×576 1440×576 1280×720 1280×720 1920×1080 1920×1080 1920×1080 1920×1080 1920×1080 Horizontal scan rate: Vertical scan rate: range limits Max. pixel rate: 59.94/60 59.94/60 50(25) 59.94/60 59.94/60 50 50 59.94/60 50 60(30) 50(25) 23.97/24 25 29.97/30 31.5 31.5 31.5 31.3 31.3 45.0 37.5 33.8 28.1 27.0 28.1 33.8 151<-50 kHz 24-60 Hz Digital: 75 MHz Note: * Functions vary depending on model definition. ****** Page 68 ****** 58 Regulations and safety notices FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the device and receiver. Connect the device into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/television technician for help. Notice: Shielded cables All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations. Notice: Peripheral devices Only peripherals (input/output devices, terminals, printers, etc.) certified to comply with the Class B limits may be attached to this equipment. Operation with non-certified peripherals is likely to result in interference to radio and TV reception. Caution Changes or modifications not expressly approved by the manufacturer could void the user's authority, which is granted by the Federal Communications Commission, to operate this device. Operation conditions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Notice: Canadian users This Class B digital apparatus complies with Canadian ICES-003. ****** Page 69 ****** 59 Remarque Ilintention des utilisateurs canadiens Cet appareil numérique de la classe B est conforme a la norme NMB-003 du Canada. Declaration of Conformity for EU countries Acer hereby declares that this projector series is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Compliant with Russian regulatory certification 001 Radio device regulatory notice Note: The regulatory information below is for models with wireless LAN and/or Bluetooth only. General This product complies with the radio frequency and safety standards of any country or region in which it has been approved for wireless use. Depending on configurations, this product may or may not contain wireless radio devices (such as wireless LAN and/or Bluetooth modules). Canada — Low-power license-exempt radio communication devices (RSS-210) a b Common information Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device. Operation in 2.4 GHz band To prevent radio interference to the licensed service, this device is intended to be operated indoors and installation outdoors is subject to licensing List of applicable countries This device must be used in strict accordance with the regulations and constraints in the country of use. For further information, please contact the local office in the country of use. Please see ec.europa.eu/enterprise/rtte/implem.htm for the latest country list. ****** Page 70 ****** acer Acer Incorporated 88. sec 1. Xintai 5th Rd.. Xizhi New Taipei City 221, Taiwan Declaration of Conformity Acer Incorporated 8F, 88, sec. 1, Xintai 5th Rd., Xizhi, New Taipei City 221, Taiwan Contact Person: Mr. RU Jan, e-mail: email@example.com And, Acer Italy s.r.l Via Lepetit, 40, 20020 Lainate (MI) Italy Tel: +39-02-939-921 ,Fax: +39-02 9399-2913 acer.lt Declare under our own responsibility that the product: Product: Trade Name: Model Number: DLP Projector Acer DNX1403/DWX1425/DIP1404/DIP1426/DIP1427 P1287/M416/PE-X45/P1387W/M426/PE-W45/P5515/ N156/PN-805/H6517BD/E145D/HE-801J/H6517ST/ E145S/HE-801ST To which this declaration refers conforms to the relevant standard or other standardizing documents: EN55022:2010 Class B; EN 55024:2010 EN61000-3-2:2006+A 1 Class A EN61000-3-3:2008 EN 60950-1 Regulation (EC) No. 1275/ 2008; EN 6230112005 EN50581:2012 We hereby declare above product is in compliance with the essential requirements and other relevant provisions of EMC Directive 2004/108/EC, Low Voltage Directive 2006/95/EC and RoHS Directive 2011/65/EU and Directive 2009/125/EC with regard to establishing a framework for the setting of ecodesign requirements for energy-related product. Year to begin affixing CE marking 2014. nac R Jan r. Manager Regulation, Accr Inc. Nor. 14 2014 Date ****** Page 71 ****** acer Acer America Corporation 333 West San Carlos St., Suite 1500 San Jose, CA 95110 Tel: 254-298-4011) Fax: 254-2984147 Federal Communications Commission Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The following local Manufacturer / Importer is responsible for this declaration: Product: Model Number: Machine Type: Name of Responsible Party: Address of Responsible Party: Contact Person: Phone No.: Fax No.: DLP Projector DNX1403/DWX1425/DIP1404/DIP1426/DIP1427 P1287/M416/PE-X45/P1387W/M426/PE-W45/ P5515/N156/PN-805/H6517BD/E145D/HE-801J/ 1-16517ST/E145S/HE-801ST Acer America Corporation 333 West San Carlos St. Suite 1500 San Jose, CA 95110 U.S.A. Acer Representative 254-298-4000 254-298-4147
FREE ENGLISH PDF
USER GUIDE – USER MANUAL
OWNER GUIDE – OWNER MANUAL
REFERENCE GUIDE – REFERENCE MANUAL
INSTRUCTION GUIDE – INSTRUCTION MANUAL