Post questions, comments, reviews or page errors in the comment box below.

Click here to download ACER H5360 (01) PDF MANUAL


PDF Content Summary:

****** Page 1 ****** Acer Projector 1-45360 Series Userls Guide

****** Page 2 ****** Copyright 0 2009. Acer Incorporated. All Rights Reserved. Acer Projector H5360 Series User’s Guide Original Issue: 08/2009 Changes may be made periodically to the information in th is publication without obligation to notify any person of such revisions or changes. Such changes will be incorporated in new editions of this manual or supplementary documents and publications. This company makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims the implied warranties of merchantability or fitness for a particular purpose. Record the model number, serial number, purchase date and place of purchase information in the space provided below. The serial number and model number are recorded on the label affixed to your projector. All correspondence concern ing your unit should include the serial number, model number and purchase information. No part of th is publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electron ically, mechanically, by photocopy, recording or otherwise, without the prior written permission of Acer Incorporated. Acer Projector H5360 Series Model number: Serial number: Date of purchase: Place of purchase: Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies’ product names or trademarks are used herein for identification purposes only and belong to their respective compames. ” HDMITM, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.”

****** Page 3 ****** iii Information for your safety and comfort Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. Turning the product off before cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. Caution for plug as disconnecting device Observe the following guidelines when connecting and disconnecting power to the external power supply unit: Install the power supply unit before connecting the power cord to the AC power outlet. Unplug the power cord before removing the power supply unit from the projector. If the system has multiple sources of power, disconnect power from the system by unplugging all power cords from the power supplies. Caution for Accessibility Be sure that the power outlet you plug the power cord into is easily accessible and located as close to the equipment operator as possible. When you need to disconnect power to the equipment, be sure to unplug the power cord from the electrical outlet. Warnings! Do not use this product near water. Do not place this product on an unstable cart, stand or table. If the product falls, it could be seriously damaged. Slots and openings are provided for ventilation to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should never be placed near or over a radiator or heat register, or in a built-in installation unless proper ventilation is provided. • Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind onto or into the product.

****** Page 4 ****** To avoid damage of internal components and to prevent battery leakage, do not place the product on a vibrating surface. Never use it under sporting, exercising, or any vibrating environment which will probably cause unexpected short current or damage rotor devices, lamp Using electrical power This product should be operated from the type of power indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company. Do not allow anything to rest on the power cord. Do not locate this product where people will walk on the cord. If an extension cord is used with this product, make sure that the total ampere rating of the equipment plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure that the total rating of all products plugged into the wall outlet does not exceed the fuse rating. Do not overload a power outlet, strip or receptacle by plugging in too many devices. The overall system load must not exceed 80% of the branch circuit rating. If power strips are used, the load should not exceed 80% of the power strip’s input rating. This product’s AC adapter is equipped with a three-wire grounded plug. The plug only fits in a grounded power outlet. Make sure the power outlet is properly grounded before inserting the AC adapter plug. Do not insert the plug into a non-grounded power outlet. Contact your electrician for details. Warning! The grounding pin is a safety feature. Using a power outlet that is not properly grounded may result in electric shock and/or injury. Note: The grounding pin also provides good protection from unexpected noise produced by other nearby electrical devices that may interfere with the performance of this product. Use the product only with the supplied power supply cord set. If you need to replace the power cord set, make sure that the new power cord meets the following requirements: detachable type, UL listed/CSA certified, type SPT-2, rated 7A 125V minimum, VDE approved or its equivalent, 4.6 meters (15 feet) maximum length.

****** Page 5 ****** Product servicing Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel. Unplug this product from the wall outlet and refer servicing to qualified service personnel when: the power cord or plug is damaged, cut or frayed liquid was spilled into the product the product was exposed to rain or water the product has been dropped or the case has been damaged the product exhibits a distinct change in performance, indicating a need for service the product does not operate normally after following the operating instructions Note: Adjust only those controls that are covered by the operating instructions, since improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal condition. Warning! For safety reasons, do not use non-compliant parts when adding or changing components. Consult your reseller for purchase options. Your device and its enhancements may contain small parts. Keep them out of the reach of small children. Additional safety information Do not look into the projector’s lens when the lamp is on. The bright may hurt your eyes. Turn on the projector first and then signal sources Do not place the product in following environments: Space that is poorly ventilated or confined. At least 50cm clearance from walls and free flow of air around the projector is necessary. Locations where temperatures may become excessively high, such as inside of a car with all windows rolled up. Locations where excessive humidity, dust, or cigarette smoke may contam inate optical components, shortening the life span and darken ing the image. Locations near fire alarms, Locations with an ambient temperature above 40 oc/104 OF . Locations where the altitudes are higher than 10000 feet. Unplug immediately if there is something wrong with your projector. Do not operate if smoke, strange noise or odor comes out of your projector. It

****** Page 6 ****** vi might cause fire or electric shock. In this case, unplug immediately and contact your dealer. Do not keep using this product to break or drop it. In this case contact your dealer for inspection. Do not face the projector lens to the sun. It can lead to fire. When switching the projector off, suggest to ensure the projector completes its cooling cycle before disconnecting power. Do not turn off the main power abruptly or unplug the projector during operation. It can lead to lamp breakage, fire, electric shock or other trouble. The best way is to wait for the fan to turn off before turning main power off. Do not touch air outlet grille and bottom plate which becomes hot. Clean the air filter frequently if have. The temperature inside may rise and cause damage when the filter/ventilation slots clogged with dirt or dust. Do not look into the air outlet grille when projector is operating. It may hurt your eyes. Always open the lens shutter or remove the lens cap when the projector is on. Do not block the projector lens with any object when the projector is under operation as this could cause the object to become heated and deformed or even cause a fire. To temporarily turn off the lamp, press HIDE on the remote control. The lamp becomes extremely hot during operation. Allow the projector to cool for approximately 45 minutes prior to removing the lamp assembly for replacement. Do not operate lamps beyond the rated lamp life. It could cause it to break on rare occasions. Never replace the lamp assembly or any electronic components unless the projector is unplugged. The product will detect the life of the lamp itself. Please be sure to change the lamp when is showing warning message When changing the lamp, please allow unit to cool down, and follow all changing instructions. Reset the i’ Lamp Hour Reset” function from the Onscreen display “Management” menu after replacing the lamp module Do not attempt to disassemble this projector. There are dangerous high voltages inside which may hurt you. The only user serviceable part is the lamp which has its own removable cover. Refer servicing only to suitable qualified professional service personnel. Do not stand the projector on end vertically. It may cause the projector to fall over, causing injury or damage. This product is capable of displaying inverted images for ceiling mount installation. Only use acer ceiling mount kit for mounting the projector and ensure it is securely installed.

****** Page 7 ****** vii Operating environment for using wireless function (Optional) Warning! For safety reasons, turn off all wireless or radio transmitting devices when using your machine under the following conditions. These devices may include, but are not limited to: wireless LAN (WLAN), Bluetooth and/or 3G. Remember to follow any special regulations in force in any area, and always switch off your device when its use is prohibited or when it may cause interference or danger. Use the device only in its normal operating positions. This device meets RF exposure guidelines when used normally, and it and its antenna are positioned at least 1.5 centimeters (5/8 inches) away from your body. It should not contain metal and you should position the device the above- stated distance from your body. To successfully transmit data files or messages, this device requires a good quality connection to the network. In some cases, transmission of data files or messages may be delayed until such a connection is available. Ensure that the above separation distance instructions are followed until the transmission is completed Parts of the device are magnetic. Metallic materials may be attracted to the device, and persons with hearing aids should not hold the device to the ear with the hearing aid. Do not place credit cards or other magnetic storage media near the device, because information stored on them may be erased. Medical devices Operation of any radio transmitting equipment, including wireless phones, may interfere with the functionality of inadequately protected medical devices. Consult a physician or the manufacturer of the medical device to determine if they are adequately shielded from external RF energy or if you have any questions. Switch off your device in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF transmissions. Pacemakers. Pacemaker manufacturers recommend that a minimum separation of 15.3 centimeters (6 inches) be maintained between wireless devices and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research. Persons with pacemakers should do the following: Always keep the device more than 15.3 centimeters (6 inches) from the pacemaker. Not carry the device near your pacemaker when the device is switched on. If you suspect interference, switch off your device, and move it.

****** Page 8 ****** vili Hearing aids. Some digital wireless devices may interfere with some hearing aids. If interference occurs, consult your service provider. Vehicles RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles such as electronic fuel injection systems, electronic antiskid (antilock) braking systems, electronic speed control systems, and air bag systems. For more information, check with the manufacturer, or its representative, of your vehicle or any equipment that has been added. Only qualified personnel should service the device, or install the device in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty that may apply to the device. Check regularly that all wireless equipment in your vehicle is mounted and operating properly. Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the device, its parts, or enhancements. For vehicles equipped with an air bag, remember that air bags inflate with great force. Do not place objects, including installed or portable wireless equipment in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed, and the air bag inflates, serious injury could result. Using your device while flying in aircraft is prohibited. Switch off your device before boarding an aircraft. The use of wireless teledevices in an aircraft may be dangerous to the operation of the aircraft, disrupt the wireless telephone network, and may be illegal. Potentially explosive environments Switch off your device when in any area with a potentially explosive atmosphere and obey all signs and instructions. Potentially explosive atmospheres include areas where you would normally be advised to turn off your vehicle engine. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Switch off the device at refueling points such as near gas pumps at service stations. Observe restrictions on the use of radio equipment in fuel depots, storage, and distribution areas; chemical plants; or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often, but not always, clearly marked. They include below deck on boats, chemical transfer or storage facilities, vehicles using liquefied petroleum gas (such as propane or butane), and areas where the air contains chemicals or particles such as grain, dust or metal powders. Caution for Listening To protect your hearing, follow these instructions. Increase the volume gradually until you can hear clearly and comfortably. Do not increase the volume level after your ears have adjusted. Do not listen to music at high volumes for extended periods. Do not increase the volume to block out noisy surroundings. Decrease the volume if you can’t hear people speaking near you .

****** Page 9 ****** ix Disposal instructions Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle. For more information on the Waste from Electrical and Electronics Equipment (WEEE) regulations, visit acer-group.com/public/ Sustainability/sustainability01. htm Mercury advisory For projectors or electronic products containing an LCD/CRT monitor or display: “Lamp(s) contain Mercury, Lamp(s) inside this product contain mercury and must be recycled or disposed of according to local, state or federal laws. For more information, contact the Electronic Industries Alliance at eiae.org. For lamp-specific disposal information, check lamprecycle.org

****** Page 10 ****** x First thing first Usage Notes Do: Turn off the product before cleaning. Use a soft cloth moistened with mild detergent to clean the display housing. Disconnect the power plug from AC outlet if the product is not being used for a long period of time. Don’t Block the slots and openings on the unit provided for ventilation. Use abrasive cleaners, waxes or solvents to clean the unit. Use under the following conditions: In extremely hot, cold or humid environments. In areas susceptible to excessive dust and dirt. Near any appliance that generates a strong magnetic field. Place In direct sunlight. Precautions Follow all warnings, precautions and maintenance as recommended in this user’s guide to maximize the life of your unit. Warning: Do not look into the projector’s lens when the lamp is on. The bright light may hurt your eyes. To reduce the risk of fire or electric shock, do not expose th is product to rain or moisture. Please do not open or disassemble the product as this may cause electric shock. When changing the lamp, please allow unit to cool down, and follow all changing instructions. Th is product will detect the life of the lamp itself. Please be sure to change the lamp when it shows warning messages. Reset the “Lamp Hour Reset” function from the Onscreen display “Management” menu after replacing the lamp module. When switch ing the projector off, please ensure the projector completes its cooling cycle before disconnecting power. Turn on the projector first and then the signal sources. Do not use lens cap when projector is in operation. When the lamp reaches the end of its life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn back on until the lamp module has been replaced. To replace the lamp, follow the procedures listed under “Replacing the Lamp ” .

****** Page 11 ****** Information for your safety and comfort First thing first Usage Notes Precautions Introduction Product Features Package Overview Projector Overview Projector Outlook Remote Control and Control Panel Layout Getting Started Connecting the Projector Turning the Projector On/Off Turning on the Projector Turning off the Projector Adjusting the Projected Image Adjusting the Height of Projected Image How to optimize image size and distance How to get a preferred image size by adjusting distance and zoom User Controls Installation menu Acer Empowering Technology Onscreen Display (OSD) Menus Color Image Setting Management Audio Timer Language Appendices iii x x x 1 2 3 3 4 6 6 7 7 8 9 9 10 12 14 14 15 16 17 18 21 23 23 24 24 25

****** Page 12 ****** Troubleshooting LED & Alarm Definition Listing Replacing the Lamp Ceiling Mount Installation Specifications Compatibility modes Regulations and safety notices 25 29 30 31 34 36 40

****** Page 13 ****** 1 Introduction Product Features This product is a single-chip DLP@ projector. Outstanding features include: DLP@ technology Native 1280 x 720 720p resolution 4:3 / 16:9 / L.Box aspect ratio supported Acer ColorBoost technology delivers nature’s true colors for vivid, life-like images High brightness and contrast ratio Versatile display modes (Bright, Standard, Movie, Dark Cinema, Game, Sports, User) for optimum performance in any situation NTSC / PAL / SECAM compatible and HDTV (720p, 1080i, 1080p) supported Lower power consumption and economy (ECO) mode extends lamp life Acer EcoProjeciton Technology delivers Intelligent power management approach and physical efficiency improvement. Empowering Key reveals Acer Empowering Technology utilities (Acer eView, eTimer, ePower Management) for easy adjustment of settings Advanced digital keystone correction optimizes presentations Multi-language onscreen display (OSD) menus Manual focus projection lens zooms up to 1. IX 2X digital zoom and pan move function Microsoft@ Windows@ 2000, XP, Vista@, Macintosh@ OS compliant

****** Page 14 ****** 2 Package Overview This projector comes with all the items shown below. Check to make sure your unit is complete. Contact your dealer immediately if any thing is missing. Projector with lens cap Composite video cable o User’s guide Carrying case Power cord Battery Remote control VGA cable Acer Project— Security Card Security card 9. Quick start guide

****** Page 15 ****** Projector Overview Projector Outlook Front / upper side 1 2 1 2 3 4 5 3 4 5 6 Description Ventilation (inlet) Ventilation (outlet) Remote control receivers Focus ring Zoom lens Rear side 3 1 escnptlon Power socket KensingtonTM lock port RS232 connector 4 6 7 8 9 10 6 6 7 8 2 3 4 5 PC analog signal/HDTV/component video 9 input connector (VGA IN) HDMI connector 3 7 8 3 9 1 10 Description Lens cap Power button Remote control Zoom lever Horn 2 escriptlon YPbPr input connector S-Video input connector Composite video input connector Audio input connector

****** Page 16 ****** 4 Remote Control and Control Panel Layout 1 3 4 5 6 7 2 Function Icon RESYNC rol MENU ZOOM RATIO SOURCE : HIDE 2 8 9 8 10 11 12 13 1 2 3 4 5 6 7 8 9 10 11 12 o Remote control rece Iver POWER MENU KeyPad 0-9 ASPECT RATIO RESYNC FREEZE KEYSTONE Four directional select keys ZOOM SOURCE HIDE Description Receives signals from remote control. Refer to the “Turning the Projector On/Off” section. Press “MENU” to launch the Onscreen display (OSD) menu, back to the previous step for the OSD menu operation or exit the OSD menu. Confirm your selection of items. Press “0-9” to input a password in the “Security” . To choose the desired aspect ratio (Auto/4:3/16:9/L.Box). Automatically synchron izes the projector to the input source. To pause the screen image. Adjusts the image to compensate for distortion caused by tilting the projector (± 40 degrees). Use up, down, left, right buttons to select Items or make adjustments to your selection. Zooms the projector display in or out. Changes the active source. Momentarily turns off the video. Press “HIDE” to hide the image, press again to display the image.

****** Page 17 ****** 13 Function Icon Empowering key 5 Description Un ique Acer functions: eView, eTimer, ePower Management. Note: Model NO NOTICE Rating: A-16-B DC 3V 60mA MAX BONTECH ELECTRONICS CO.,LTD. MADE IN CHINA Remote Control Placement Please refer to the illustration to attach the remote control to the projector.

****** Page 18 ****** 6 Getting Started Connecting the Projector VGA 1 S-Video Output 9 8 7 escriptlon 1 2 3 4 5 escriptlon Power cord RS232 cable VGA cable HDMI cable 3 RCA component cable o Video Output 6 7 8 9 Audio cable jack/jack Audio cable Jack/RCA Composite video cable S-Video cable Note: To ensure the projector works well with your comp uter, please make sure the timing of the display mode is compatible with the projector.

****** Page 19 ****** 7 Turning the Projector On/Off Turning on the Projector 1 2 3 4 Remove the lens cap.(lllustration #1) Ensure that the power cord and signal cable are securely connected. The Power indicator LED will flash red. Turn on the projector by pressing i’ Power” button on the control panel, and the Power indicator LED will turn blue. (Illustration #2) Turn on your source (computer, notebook, video player ,etc.). The projector will detect your source automatically. If the screen displays ” Lock” and “Source” icons, it means the projector is locked onto a specific source type and there is no such type of input signal detected. If the screen displays ” No Signal” , please make sure the signal cables are securely connected. If you connect to multiple sources at the same time, use the “Source” button on the remote control to switch between inputs. 2 Power button 1 Lens cap

****** Page 20 ****** 8 Turning off the Projector 1 2 3 4 To turn off the projector, press the ” Power” button twice. The message below will display onscreen for 5 seconds. “Please press power button again to complete the shutdown process. ” Immediately after powering off, the Power indicator LED will flash RED rapidly and the fan(s) will continue to operate for about 120 seconds. This is to ensure that the system cools correctly. Once the system has finished cooling, the Power indicator LED will turn solid RED which means projector enter standby mode. It is now safe to unplug the power cord. Warning: Do not turn on the projector immediately after powering off. Note: If you wish to turn the projector back on, you must wait for 60 seconds at least to press the ” Power” button to restart the projector. Warning indicators: If the projector automatically shuts down and the Power indicator quick flashing RED and steady BLUE by returns, please contact your local reseller or service center. If the projector automatically shuts down and the Power indicator quick flashing RED and steady BLUE by returns, this indicates that the projector has overheated. The message below will display onscreen if this is about to happen: “Projector Overheated. Lamp will automatically turn off soon. ” If the Power indicator quick flashing RED and steady BLUE by returns and the message below is displayed onscreen, please contact your local dealer or service center: “Fan fail. Lamp will automatically turn off soon. “

****** Page 21 ****** Adjusting the Projected Image Adjusting the Height of Projected Image The projector is equipped with elevator feet for adjusting the height of image. To raise/lower the image: 1 Use Tilt adjusting wheel (Illustration #1) to fine-tune the display angle. Tilt adjusting wheel

****** Page 22 ****** 10 How to optimize image size and distance Consult the table below to find the optimal image sizes achievable when the projector is positioned at a desired distance from the screen. Example: If the projector is 3 m from the screen, good image quality is possible for image sizes between 80″ and 87″ . Note: Remind as below figure, the space of 122 cm height is required when located at 3m distance. 87, Height: 122cm Form base to top of image Height 112cm 3m Desired Distance Figure: Fixed distance with different zoom and screen size.

****** Page 23 ****** 11 Top Screen size Desired (Min zoom) Distance Top Screen Size (Max zoom) Diagonal (m) 1.5 2 2.5 3 3.5 4 4.5 5 6 7 8 9 10 10.3 Diagonal (inch) 27 40 53 66 80 93 106 120 133 159 186 213 239 266 274 1.1x W (cm) x 59 x 33 88 x 50 118 x 66 147 x 83 176 x 99 206 x 116 235 x 132 265 x 149 294 x 165 353 x 199 412 x 232 471 x 265 529 x 298 588 x 331 606 x 341 From base to top of image (cm) 37 56 74 93 112 130 149 167 186 223 260 298 335 372 383 (in ch) 29 58 73 87 102 117 131 146 175 204 233 262 291 300 W (cm) x 65 x 36 97 x 54 129 x 73 161 x 91 194 x 109 226 x 127 258 x 145 290 x 163 323 x 181 387 x 218 452 x 254 516 x 290 581 x 327 645 x 363 665 x 374 From base to top of image (cm) 41 61 82 102 122 143 163 184 204 245 286 326 367 408 420 Zoom Ratio:

****** Page 24 ****** 12 How to get a preferred image size by adjusting distance and zoom Height Fcym base to top of 1.7 m 1.9 m Desired Distanæ The table below shows how to achieve a desired image size by adjusting either the position or the zoom ring. Example: to obtain an image size of 50″ set the projector at a distance 1.7 m and 1.9 m from the screen and adjust the zoom level accordingly.

****** Page 25 ****** Desired Image Size D istance (m) Diagonal (inch) 30 40 50 60 70 80 90 100 120 150 180 200 250 300 Zoom Ratio: 1.1x W (cm) x H (cm) 66 x 37 89 x 50 111 x 62 133 x 75 155 x 87 177 x 100 199k 112 221 x 125 266 x 149 332k 187 398 x 224 443 x 249 553 x 311 664 x 374 Max zoom 1.0 1.4 1.7 2.1 2.4 2.7 3.1 3.4 4.1 5.1 6.2 6.9 8.6 10.3 Min zoom 1.1 1.5 1.9 2.3 2.6 3.0 3.4 3.8 4.5 5.6 6.8 7.5 9.4 13 Top (cm) From base to top of mage 42 56 70 98 112 126 140 168 210 252 280 350 420

****** Page 26 ****** 14 User Controls Installation menu The installation menu provides an onscreen display (OSD) for projector installation and maintenance. Use the OSD only when the message “No signal input” is displayed on the screen. The menu options include settings and adjustments for screen size and distance, focus, keystone correction and more 1 2 3 4 5 Turn on the projector by pressing “Power” button on the control pad. Press the “MENU ” button on the control pad to launch the OSD for projector installation and maintenance. Installation Mode Projection Location Menu Location Auto K eystono Manual keystone Language Sewet Adjust Engl•sh Exit The background pattern acts as a guide to adjusting the calibration and alignment settings, such as screen size and distance, focus and more The Installation menu includes the following options: •Projection method •Projection location •Menu location •Keystone settings •Language settings •Reset to factory default function Use the up and down arrow keys to select an option, the left and right arrow keys to adjust selected option settings, and the right arrow key to enter a submenu for feature setting. The new settings will be saved automatically upon exiting the menu. Push the menu button anytime to exit the menu and return to the Acer welcome screen.

****** Page 27 ****** 15 Acer Empowering Technology Empowering@ Key mpowering technology Empowering Key Settings Acer eView Management Acer eTimer Management Acer ePower Management Acer eView Management empowering technology Acer eView Management Bright Standard Movie Dark Cinema Game Sports User Confirm e vit Acer eTimer Management e mpowering technology Acer eTimer Management Start II Minutes Period Oisplay Location Acer ePower Management e mpowering technology Acer ePower Management eco Mode High Altitude O Auto Shutdown Acer Empowering Key provide three Acer unique functions, they are “Acer eView Management”, “Acer eTimer Management” and ” Acer ePower Management” respectively. Press i’ key for more than one second to launch the Onscreen display main menu to modify its function. to launch “Acer eView Press Management” submenu. “Acer eView Management” is for display mode selection. Please refer to Onscreen Display Menus section for more detail. to launch “Acer eTimer Press Management” submenu. “Acer eTimer Management” provides the reminding function for presentation time control. Please refer to Onscreen Display Menus section for more detail. to launch ‘l Acer ePower Press Management”. “Acer ePower Management” provides user one shortcut to save lamp and projector life. Please refer to Onscreen Display section for more detail Off

****** Page 28 ****** 16 Onscreen Display (OSD) Menus The projector has multilingual OSD that allow you to make image adjustments and change a variety of settings. Using the OSD menus To open the OSD menu, press “MENU” on the remote control. When the OSD is displayed, use the A v keys to select any item in the main menu. After selecting the desired main menu item, press to enter submenu for feature setting. Use the A v keys to select the desired item and adjust the settings by using the keys. Select the next item to be adjusted in the submenu and adjust as described above. Press “MENU” on the remote control, the screen will return to the main menu. To exit OSD, press “MENU” on the remote control again. The OSD menu will close and the projector will automatically save the new settings. Main menu Color Display Mode Wall Color Brightness Contrast Color Temperature Oegamma Color R Color G Color a Saturation 3elect Sub menu Bright Setting Enter Exit

****** Page 29 ****** Color Display Mode Wall color Brightness Contrast Color Temperature Degamma Color R Color G Color B Color •splay Mode au COIL”‘ Tempe-aure gamma Bright 50 Flii There are many factory presets optimized for various types of mages. • Bright: For brightness optim ization. Standard: For common environment. Movie: For brighter and general movie/video/photo playing. Dark Cinema: For dark movie content. Game: For game content. Sports: For sport picture. User: Memorize user’s settings. Use this function to choose a proper color according to the wall. There are several choices, including white, light yellow, light blue, pink, dark green. It will compensate the color deviation due to the wall color to show the correct image tone. Adjust the brightness of the image. Press < to darken image. Press to lighten the image. "Contrast" controls the difference between the lightest and darkest parts of the picture. Adjusting the contrast changes the amount of black and white in the image. Press < to decrease the contrast. Press to increase the contrast. Adjust the color temperature. At higher color temperatures, the screen looks colder; at lower color temperatures, the screen looks warmer. Effects the representation of dark scenery. With greater gamma value, dark scenery will look brighter. Adjusts the red color. Adjusts the green color. Adjusts the blue color. ****** Page 30 ****** 18 Saturation Tint Adjusts a video image from black and wh ite to fully saturated color. Press < to decrease the amount of color in the image. Press to increase the amount of color in the image. Adjusts the color balance of red and green. Press to increase the amount of green in the image. Press to increase the amount of red in the image. Note: "Saturation" and "Tint" functions are not supported under computer mode or DVI mode. Image Projection mode Projection Location Image Pitßtt•m -13 Ert•ver Front: The factory default setting. Rear: Reverses the image so you can project from behind a translucent screen. Auto: Automatically adjusts projection location of image. Desktop Ceiling: Turns the image upside down for ceiling-mounted projection. ****** Page 31 ****** Aspect Ratio 1619 Auto Keystone Manual Keystone H. Position (Horizontal position) V. Position (Vertical position) Frequency Tracking Sharpeness 3D sync LR 19 Use th is function to choose your desired aspect ratio. Auto: Keep the image with original width-h igth ratio and maxi mize the image to fit native horizontal or vertical pixels. 4:3: The image will be scaled to fit the screen and displayed using a 4:3 ratio. 16:9: The image will be scaled to fit the width of the screen and the height adjusted to display the image using a 16:9 ratio. Automatically adjusts vertical image. Adjust image distortion caused by tilting projection. (±40 degrees) The Manual Keystone funcion is unavailable under Auto Keystone setting to “On ” . Press to move the image left. Press to to move the image right. Press to move the image down. Press to move the image up. “Frequency” changes the projector’s refresh rate to match the frequency of your computer’s graph ics card. If you can see a vertical flickering bar in the projected image, use this function to make the necessary adjustments. Synchron izes the signal timing of the projector with the graph ics card. If you experience an unstable or flickering image, use this function to correct it. Adjusts the sharpness of the image. Press < to decrease the sharpness. Press to increase the sharpness. Choose "NVIDIA 3D Vision " or "DLP 31)" to enable 3D function supported by NVID IA or Tl DLP 3D technology. • NVIDIA 3D Vision: Choose this item while using NVIDIA 3D glasses, IR emitter, NVIDIA graph ic card and NVIDIA compliant 3D games or 3D movie with corresponding SW player. Please visit NVIDIA URL (nvidia.com/object 3D_Vision_Requ irements.html) to check detail system configuration. DLP 3D: Choose th is item while using DLP 3D glasses, quad buffer (NVIDIA/ATI…) graphic card and HQFS format file or DVD with corresponding SW player. Off: Turn off 3D mode. If you see a discrete or overlapping image while wearing DLP 3D glasses, you may need to execute " Invert" to get best match of left/ right image sequence to get the correct image (for DLP 3D). Note: "H. Position", "V. Position "Frequency" and "Tracking" functions are not supported under DVI or Video mode. ****** Page 32 ****** 20 Note: "Sharpness" functions is not supported under DVI and Computer mode. Note: While using NVIDIA 3D Vison, please download and install latest NVIDIA 3D VISION driver from NVID IA web site for your graphic card to support this projector. Note: It needs correct settings on graph ic card 3D application program for correct 3D display. Note: The SW players, such as Stereoscopic Player and DDD TriDef Media Player can support 3D format files. You can down load these three players on web page below, NVIDIA Stereoscopic 3D Video Player: nvidia.com/object/3D_Drivers_Down loads.html – Stereoscopic Player (Trial): 3dtv.at/Down loads/lndex_en.aspx – DDD TriDef Media Player (Trial): tridef.com/down load/TriDef-3-D-Experience-4.0.2.html Note: "3D Sync LR" is only available when 3D is enabled. Note: There has reminder screen if 3D still enable when power on projector. Please adjust setting depended on your purpose. Notice 30 display mode is enabled naw- 1. Please make sure to Input correct 30 signals and wear 30 glasses at the same time. Yöu may need to execute "Invert"function for "30 Sync LR' option to get the correct image. 2. Please remember to turn off 3D ifyou dont want to see 30 images. ****** Page 33 ****** 21 Setting Menu Location Source Lock Closed Caption Security Setting Menu L-oc•ticw. source LOCE Closet Canon Securer Reset Select Choose the menu location on the display screen. When source lock is turned "off", the projector will search for other signals if the current input signal is lost. When source lock is turned "on it will " lock" the current source channel unless you press "Source" button on the remote control for the next channel. Selects a preferred closed captioning mode from CCI, CC2, CC3, CC4, (CCI displays captions in the primary language in your area). Select "Off" to turn off the captioning feature. This function is on ly available when a composite video or S-Video input signal is selected and its system format is NTSC. This function is not available when the aspect ratio is ” 16:9″ or 16:9 format detected under “Auto mode” .. Security This projector provides a useful security function for the administrator to manage usage of the projector . Press to change the “Security” setting. If the security function is enabled, your must enter the “Admin istrator Password” first before changing the security settings. Select ” On” to enable the security function. The user has to enter a password to operate the projector. Please refer to the ” User Password” section for details. If “Off” is selected, then the user can turn on the projector without password. Timeout(Min.) Once “Security” is activated to “On the adm inistrator can set timeout function. Press or to select the timeout interval. The range is from 10 minute to 990 minutes. When the time is up, the projector will prompt the user to enter the password again. The factory default setting of “Timeout(Min.)” is “Off”. Once the security function is enabled, the projector will request user to enter password when switch on the projector . Both “User Password” and “Administrator Password” can be accepted for th is dialogue.

****** Page 34 ****** 22 Set Passwcwd Set Reset User password Press to setup or change the ” User Password” . Press number keys to set your password on the remote control and press “MENU” to confirm. Press to delete character. Enter the password when you see “Confirm Password displayed. The password should be between 4 and 8 characters long. If you select “Request password on ly after plugging power cord the projector will prompt the user to enter the password every time the power cord is plugged. If you select “Always request password wh ile projector turns on ” , the user has to enter the password every time when the projector is turned on. Administrator Password The “Administrator Password” can be used in both the “Enter Administrator Password” and ” Enter Password” dialog boxes. Press to change the “Admin istrator Password” . • The factory defau It of “Administrator Password” is ” 1234″ If you forgot your administrator password, do the following to retrieve the admin istrator password: An unique 6-digit “Universal Password” which is printed on the Security Card (please check accessory in the box). Th is unique password is the number wh ich will be accepted by projector anytime no matter what the Admin istrator Password is. If losing this security card and number, please contact with an Acer service center. Press the button and choose “Yes” to return the parameters on all menus to the factory defau It settings.

****** Page 35 ****** Management Management High Shitude o Shutdoon Hour Elspse I-imp Reminding Lamp Hour Reset Seleel 23 Pren ECO Mode High Altitutde Auto Shutdown Lamp Hour Elapse Lamp Reminding Lamp Hour Reset Audio Volume Mute Choose “On ” to dim the projector lamp which will lower power consumption, extend the lamp life and reduce noise. Choose “Off” to return normal mode. Choose “On ” to turn on High Altitude mode. Operate the fans at full speed continuously to allow for proper high altitude cooling of the projector. The projector will automatically shutdown when there is no signal input after the allocated time. (in minutes) Displays the lamp’s elapsed operating time (in hours). Activate this function to display a reminder to change the lamp 30 hours before its expected end-of-life. Press the button and choose “Yes” to turn the lamp hour counter to 0 hours. an-r volume • Power On/Off Volume Alarm Volume Press to decrease the volume. Press to increase the volume. Choose “On ” to mute the volume. Choose “Off” to restore the volume. Select this function to adjust the notification volume when turn ing the projector on/off. Select this function to adjust the volume of any warning votifications.

****** Page 36 ****** 24 Timer Timer Location Timer Start Timer Period Timer Volume Timer Display Language Language Imer Tr•ner T*ner Stan Timer Volume Tw•ner • Ent Choose the location of the timer on the screen. Press to start or stop the timer. Press or to adjust the timer period. Select this function to adjust the nitification volume when the timer function is enabled and time is up. Press or to which timer mode to display on the screen. Language English I e: lina ansjk eutsct• aiol tatßiG tan ano agv•r ands Portugues Select Svenska Tütkß Enter EYI Choose the mu Itilingual OSD menu. Use the to select your preferred menu language. Press to confirm the selection. key

****** Page 37 ****** 25 Appendices Troubleshooting If you experience a problem with your Acer projector, refer to the following troubleshooting guide. If the problem persists, please contact your local reseller or service center. Image Problems and Solutions 2 Problem No image appears onscreen Partial, scrolling or incorrectly displayed image(For PC (Windows 95/98/ 2000/XP)) Solution Connected as described in the “Getting Started” section Ensure none of the connector pins are bent or broken. Check if the projector lamp has been securely installed. Please refer to the “Replacing the Lamp” section. Make sure you have removed the lens cap and the projector is switched on. Press “RESYNC” on the remote control. For an incorrectly displayed image: Open ” My Computer,” open the “Control Panel,” and then double-click the “Display” Icon. Select the “Settings” tab. Verify that your display resolution setting is lower than or equal to UXGA (1600 x 1200). Click the “Advanced Properties” button. If the problem still appears, change the mon itor display you are using and follow the steps below: Verify that the resolution setting is lower than or equal to UXGA (1600 x 1200). Click the “Change” button under the “Monitor” tab. Click “Show all devices”. Next, select “Standard monitor types” under the SP box, and choose the resolution mode you need under the “Models” box. Verify that the resolution setting of the mon itor display is lower than or equal to UXGA (1600 x 1200).

****** Page 38 ****** 26 3 4 5 6 7 8 Partial, scrolling or incorrectly displayed image (For notebooks) The screen of the notebook computer is not displaying your presentation lmaqe is unstable or ffickering Image has vertical flickering bar Image is out of focus Image is stretched when displaying a “widescreen ” DVD title Press ” RESYNC” on the remote control. For an incorrectly displayed image: Follow the steps for item 2 (above) to adjust the resolution of your computer. Press the toggle output settings. Example: Compaq [Fn]+[F4], Dell [Fn]+[F8], Gateway IBM HP NEC Toshiba ] If you experience difficu Ity changing resolutions or your monitor freezes, restart all equipment including the projector. If you are using a Microsofte Windows based notebook: Some notebook PCs may deactivate their own screens when a second display device is in use. Each has a different way to be reactivated. Refer to your computer’s manual for detailed information. If you are using an Apple@ Maco OS based notebook: In System Preferences, open Display and select Video Mirroring “On Adjust the “Tracking” to correct it. Refer to the “Image” section for more information. Change the display color depth settings on your computer. Use “Frequency” to make an adjustment. Refer to the “Image” section for more information. Check and reconfigure the display mode of your graphics card to make it compatible with the projector. Make sure the lens cap is removed. Adjusts the focus ring on the projector lens. Make sure the projection screen is within the required distance of 3.3 to 33.8 feet (1.0 to 10.3 meters) from the projector. Refer to the “How to Get a Preferred Image Size by Adjusting Distance and Zoom” section for more information. When you play a DVD encoded in anamorphic or 16:9 aspect ratio you may need to adjust the following settings: If you play a 4:3 format DVD title, please change the format to 4:3 in the projector OSD. If the image is still stretched, you will also need to adjust the aspect ratio. Set up the display format to 16:9 (wide) aspect ratio on your DVD player.

****** Page 39 ****** 9 10 11 Image is too small or too large Image has slanted sides Image is reversed 27 Adjust the zoom lever on the front of the projector. Move the projector closer to or further from the screen. Press “MENU” on the remote control. Go to “Image –> Aspect Ratio” and try different settings or press” Aspect Ratio” on the remote control to adjust directly. If possible, reposition the projector so that it is centered on the screen. Press the ” Keystone L/ ” button on the remote control until the sides are vertical. Press “MENU” on the remote control. Go to “Image – -> Auto Keystone” and choose “Off” on the OSD, if “Keystone” button is not available on the remote control. Select ” Image –> Projection ” on the OSD and adjust the projection direction. Problems with the Projector 2 Condition The projector stops responding to all controls Lamp burns out or makes a popping sound Solution If possible, turn off the projector, then unplug the power cord and wait at least 30 seconds before reconnecting power. When the lamp reaches the end of its useful life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn on until the lamp module has been replaced. To replace the lamp, follow the procedures in the “Replacing the Lamp” section.

****** Page 40 ****** 28 OSD Messages Condition Message Message Reminder Fan Fail – the system fan is not working. Fan Fail. Lamp will eutcrnaticelly tum of Projector Overheated – the projector has exceeded its recommended operating temperature and must be allowed to cool down before it may be used Projector Overheated. Lamp automatically tum of soon. Replace the lamp – the lamp is about to reach its maximum lifetime. Prepare to replace it soon. Lamp is approaching the of it. useful lifO in full operatiom Replacement

****** Page 41 ****** LED & Alarm Definition Listing LED Messages Message Input Power Plug Standby Power button ON Lamp retry Power off (Cooling state) Power button OFF: Cooling completed; Standby Mode Error (Thermal Failure) Error (Fan lock) Error (Lamp breakdown) Error (Color Wheel fail) Power LED Red Flash ON to OFF IOOms Quick Flash ing 29 Blue Qu ick Flashing Quick Flash ing RED and Steady BLUE by returns Quick Flash ing RED and Steady BLUE by returns Quick Flashing BLUE and Steady RED by returns Quick Flashing BLUE and Steady RED by returns

****** Page 42 ****** 30 Replacing the Lamp Use a screwdriver to remove the screw(s) from the cover, and then pull out the The projector will detect the lamp life. You will be shown a warning message JJ Lamp is approaching the end of its useful life in full power operation. Replacement Suggested! ” When you see this message, change the lamp as soon as possible. Make sure the projector has been cooling down for at least 30 minutes before changing the lamp Warning: The lamp compartment is hot! Allow it to cool down before changing the lamp. 2 To Change the Lamp 3 1 2 3 4 5 6 7 Turn off the projector by pressing the Power button. Allow the projector at least 30 mins to cool down. Disconnect the power cord. Use a screwdriver to remove the screw from the cover. (Illustration #1) Push up and remove the cover. Remove the two screws that secure the lamp module (Illustration #2) and pull up the lamp bar.(lllustration #3) Pull out the lamp module by force. (Illustration #4) To replace the lamp module, reverse the previous step. Warning: To reduce the risk of personal injury, do not drop the lamp module or touch the lamp bulb. The bulb may shatter and cause injury if it is dropped.

****** Page 43 ****** 31 Ceiling Mount Installation If you wish to install the projector using a ceiling mount, please refer to the steps below: 1 2 Drill four holes into a solid, structurally sound part of the ceiling, and secure the mount base. Note: Screws are not included. Please obtain the appropriate screws for your type of ceiling Secure the ceiling rod using the appropriate type of four-cylinder screws. Short Rod o o O O o Screw Type A 50 mm length / 8 mm diameter – Ceiling Mount Base – Attach to ceiling Long Rod Extension Rod Long Cylinder Cap Allen Key • For tightening/looseni Tightening Screw Medium Rod

****** Page 44 ****** 32 3 Use the appropriate number of screws for the projector size to attach the projector to the ceiling mount bracket. Smaller Washer Large Washer Projector Bracket Supports projector and allows – for adjustments To Screw Type B Spacer – For heat dissipation 4 Note: It is recommended that you keep a reasonable space between the bracket and the projector to allow for proper heat distribution. Use two washers for extra support, if deemed necessary. Attach the ceiling bracket to the ceiling rod. O O O Screw Type A 50 mm length /8 mm diameter Large cylinder cap Allen Key – For tightening/loosening Tightening Screw

****** Page 45 ****** 5 33 Adjust the angle and positioning as necessary. Tightening Screw Allen Key 3600 Allen Key Tightening Screw Note: The appropriate type of screw and washer for each model is listed in the table below. 3 mm diameter screws are enclosed in the screw pack. Screw Type B Models 145360 Washer Type Diameter (mm) Length (mm) 25 Large 15.00 mm Small SCREW SPEC. M3 x 25 mm 95.00 mm

****** Page 46 ****** 34 Specifications The specifications listed below are subject to change without notice. For final specs, please refer to Acer’s published marketing specifications. Projection system Resolution Computer compatibility Video compatibility Aspect ratio Displayable colors Projection lens Projection screen size (diagonal) Projection distance Throw ratio Horizontal scan rate Vertical refresh scan rate Lamp type Keystone correction Audio Weight Dimensions (W x D x H) Digital Zoom Power supply Power consumption Operating temperature 1/0 connectors 145360: Native: 720P (1280 x 720) , Maximum: UXGA (1600 X 1200), WSXGA+ (1680K 1050), 1080p( IBM PC and compatibles, Apple Macintosh, iMac and VESA standards: SXGA, XGA, VGA, SVGA, SXGA+, WXGA, WXGA+, WSXGA + NTSC (3.58/4.43), PAL (B/D/G/H/I/WN), SECAM (B/D/G/ K/KI/L), HDTV (720p, 1080i, 1080p), EDTV (480m 576p), SDTV (480i, 576i) Auto, 4:3, 16:9, L.Box 1.07 Billion colors F/ 2.5 – 2.67, f = 21.86 mm – 24.00 mm, 1.1X manual zoom lens 27″ (0.69m) – 300″ (7.62 m) 3.3′ (1.0 m) – 33.81 (10.3 m) (1.55 – 1.70:1) 30k – 100 kHz 50-85 Hz, 120Hz (for 3D mode only) 200W user-replaceable lamp ± 40 degrees Internal speaker with 2 W output 2.26 Kg (4.9 lbs.) 268 mm x 192 mm x 80 mm (10.6″ x 7.6″ x 3.1″) AC input 100 – 240 V auto-switching power supply 248W ± 10% for normal mode 201w ± for ECO mode to 350C / 410F to 950F Power socket xl VGA input xl RS232 xl Composite video xl S-Video xl 3 RCA Component video xl HDMI xl 3.5 mm audio jack input xl

****** Page 47 ****** Standard package contents 35 AC power cord xl VGA cable xl Composite video cable xl Remote control xl Battery xl (for remote control) User’s guide (CD-ROM) xl Quick start guide xl Security card xl Carrying case xl * Design and specifications are subject to change without notice.

****** Page 48 ****** 36 Compatibility modes A. VGA Analog 1 VGA Analog – PC Signal Modes VGA SVGA XGA SXGA QuadVGA SXGA+ UXGA PowerBook G4 PowerBook G4 PowerBook G4 PowerBook G4 PowerBook G4 PowerBook G4 i Mac DV(G3) Resolution 640×480 640×480 640×480 640×480 640×480 800×600 800×600 800×600 800×600 800×600 800×600 1024×768 1024×768 1024×768 1024×768 1024×768 1152×864 1 152×864 1 152×864 1280×1024 1280×1024 1280×1024 1280×1024 1280×960 1280×960 1400×1050 1600×1200 640×480 640×480 800×600 1024×768 1152×870 1280×960 1024×768 V.Frequency [Hz] 60 72 75 85 119.51 56 60 72 75 85 119.85 60 70 75 85 1 19.804 70 75 85 60 72 75 85 60 75 60 60 60 66.6(67) 60 60 75 75 75 H.Frequency [KHz] 31.47 37.86 37.50 43.27 61.60 35.20 37.88 48.08 46.88 53.67 77.20 48.36 56.48 60.02 68.67 98.80 63.80 67.50 77.10 63.98 77.90 79.98 91.15 60.00 75.00 65.32 75.00 31.50 35.00 37.88 48.36 68.68 75.20 60.30

****** Page 49 ****** 2 3 VGA Analog Modes WXGA WXGA+ WSXGA VGA Analog 480i 480p 576i 576p 720p 720p 1080i 1080i 1080p 1080p Extended Wide timing Resolution 1280×768 1280×768 1280×768 1280×720 1280×720 1280×800 1366×768 1440×900 1680×1050 1920×1080-RB 1920×1080-ElA V.Frequency [Hz] 1024×600 Component Signal 720×480 720×480 720×576 720×576 1280×720 1280×720 1920×1080 1920×1080 1920M 080 1920×1080 60 75 85 60 1 19.858 60 60 60 60 60 60 60 59.94(29.97) 59.94 50(25) 50 60 50 60(30) 50(25) 60 50 B. HDMI Digital (1) HDMI – PC Signal(same as DVD Modes VGA SVGA XGA Resolution 640×480 640×480 640×480 640×480 640×480 800×600 800×600 800×600 800×600 800×600 800×600 V.Frequency [Hz] 60 72 75 85 119.51 56 60 72 75 85 1 19.85 60 37 H.Frequency [KHzl 47.78 60.29 68.63 44.80 92.89 49.60 47.71 55.90 65.30 66.60 66.60 37.30 27.00 31.47 27.00 31.25 45.00 37.50 33.75 33.75 67.50 56.26 H.Frequency [KHz] 31.47 37.86 37.50 43.27 61.61 35.20 37.88 48.08 46.88 53.67 77.20 48.36

****** Page 50 ****** 38 SXGA 77.90 79.98 91.15 QuadVGA 75.00 PowerBook G4 31 50 PowerBook G4 35.00 PowerBook G4 37.88 PowerBook G4 PowerBook G4 PowerBook G4 i Mac DV(G3) 92.89 49.60 47.71 55.90 65.30 66.60 66.60 37.30 27.00 31.47 27.00 31.25 45.00 37.50 33.75 1024×768 1024×768 1024×768 1152×864 1152×864 1280×1024 1280×1024 1280×1024 1280×1024 1280×960 640×480 640×480 800×600 1024×768 1152×870 1280×960 1024×768 70 75 119.804 70 85 60 72 75 85 75 60 66.6(67) 60 60 75 75 75 (2) HDMI Extended Wide timing(same as DVI) Modes WXGA WXGA+ WSXGA 56.48 60.02 98.80 67.50 77.10 64.00 48.36 68.68 75.20 60.30 H.Frequency [KHzl 47.78 60.29 68.63 44.80 Resolution 1280×768 1280×768 1280×768 1280×720 1280×720 1280×800 1366×768 1440×900 1680×1050 1920×1080-RB 1920×1080-ElA 1024×600 (3) HDMI Video Signal 480i 480p 576i 576p 720p 720p 1080i 720×480 720×480 720×576 720×576 1920×1080 V.Frequency [Hz] 60 75 85 60 1 19.858 60 60 60 60 60 60 60 59.94(29.97) 59.94 50(25) 50 60 50 60(30)

****** Page 51 ****** 1080i 1080p 1080p 1920×1080 1920×1080 1920×1080 Horizontal scan rate: 50(25) 39 33.75 67.50 56.26 Graphic source moni- Vertical scan rate: tor range limits Max. pixel rate: 60 50 50-85 Hz, 30-100kHz 120Hz (for 3D mode only) 170MHz

****** Page 52 ****** 40 Regulations and safety notices FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the device and receiver. Connect the device into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/television technician for help. Notice: Shielded cables All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations. Notice: Peripheral devices Only peripherals (input/output devices, terminals, printers, etc.) certified to comply with the Class B limits may be attached to this equipment. Operation with non-certified peripherals is likely to result in interference to radio and TV reception. Caution Changes or modifications not expressly approved by the manufacturer could void the user Js authority, which is granted by the Federal Communications Commission, to operate this device. Operation conditions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, incl uding interference that may cause undesired operation. Notice: Canadian users This Class B digital apparatus complies with Canadian ICES-003.

****** Page 53 ****** 41 Remarque “intention des utilisateurs canadiens Cet appareil numérique de la classe B est conforme a la norme NMB-003 du Canada. Canada — Low-power license-exempt radio communication devices (RSS-210) a b Common information Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device. Operation in 2.4 GHz band To prevent radio interference to the licensed service, this device is intended to be operated indoors and installation outdoors is subject to licensing Declaration of Conformity for EU countries Acer hereby, declares that this projector series is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Compliant with Russian regulatory certification ME61 Radio device regulatory notice Note: The regulatory information below is for models with wireless LAN and/or Bluetooth only. General This product complies with the radio frequency and safety standards of any country or region in which it has been approved for wireless use. Depending on configurations, this product may or may not contain wireless radio devices (such as wireless LAN and/or Bluetooth modules). The below information is for products with such devices.

****** Page 54 ****** 42 European Union (EU) R&TTE Directive 1999/5/EC as attested by conformity with the following harmonized standard: Article 3.1 (a) Health and Safety EN60950-1:2001 + A11:2004 EN50371:2002 Article 3.1(b) EMC EN301 489-1 Vl.6.1 EN301 489-3 V 1.4.1 (Applicable to non-bluetooth wireless keyboard mouse set) EN301 489-17 VI .2.1 Article 3.2 Spectrum Usages EN300 440-2 VI .1.2 (Applicable to non-bluetooth wireless keyboard mouse set) EN300 328 Vl.7.1 EN301 893 V 1.4.1 (Applicable to 5GHz high performance RLAN) List of applicable countries EU member states as of May 2004 are: Belgium, Denmark, Germany, Greece, Spain, France, Ireland, Italy, Luxembourg, the Netherlands, Austria, Portugal, Finland, Sweden, Un ited Kingdom Estonia, Latvia, Lithuania, Poland, Hungary, Czech Republic, Slovak Republic, Sloven ia, Cyprus and Malta. Usage allowed in the countries of European Union, as well as Norway, Switzerland, Iceland and Liechtenstein. This device must be used in strict accordance with the regulations and constraints in the country of use. For further information, please contact a local office in the country of use.

****** Page 55 ****** Acer America Corporation 333 West San Carlos St., San Jose CA 95110, S, A. Tel 254-2984000 Fax 254-2984147 acer.com Federal Communications Commission Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (l) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The following local Manufacturer / Importer is responsible for this declaration: Product: Model Number: Machine Type: Name of Responsible Party: Address of Responsible Party: Contact Person: Phone No.: Fax No.: DLP Projector 1-17P0901 H5360 series Acer America Corporation 333 West San Carlos St. San Jose, CA 95110 Acer Representative 254-298-4000 254-298-4147

****** Page 56 ****** Acer Incorporated 88, sec- 1, Hsin Tai Wu Hsichih Taipei Hsien 221, Taiwan Declaration of Conformity we, Acer Incorporated W, 88, sec. 1, Hsin Tai wu Rd., Hsichih, Taipei Hsien 221, Taiwan Contact Person: Mr. Easy Lai, And, Acer Europe SA Via Cantonale, Centro Galleria 2 6928 Manno Switzerland Hereby declare that: Product: Trade Name; Model Number: Machine Type: Projector Acer H7P0901 H5360 series Is compliant with the essential requirements and other relevant provisions of the following EC directives, and that all the nece*sary steps have been taken and are in force to assure that production units of the same product will continue comply with the requirements. EMC Directive 2004/108/EC as attested by conformity with the following harmonized standards; EN55022, AS/NZS CISPR22, Class B EN55024 EN61000-3-2 Class A EN61000-3-3 Low Voltage Directive 2006/95/EC as attested by conformity with the following harmonized standard: EN60950-1: 2001 + All: 2004 RoHS Directive 2002/95/EC on the Restriction of the Use of certain Hazardous Substances in Electrical and Electronic Equipment – The maximum concentration values of the restricted substances by weight in homogenous material are: Lead Mercu 0.1% POI brominated Bi hen Is PBB’s 0.10/0 POI brominated Di hen I Ethers PBDE’s 0.10/0 Hexavalent Chromium 0.1% Cadmium 0.010/0 Directive 2005/32/EC of the European Parliament and of the Council with regard to Eco-design Requirements.

****** Page 57 ****** The standards listed below area lied to the roduct if built with WLAN module or wire ess •ey oar an mouse, R&TTE Directive 1999/5/EC as attested by conformity with the following harmonized standard: Article 3.1(a) Ilealth and Safety -v EN60950-l EN62311 • Article 3.1(b) EMC -v EN301 489-1 -v EN301 489-17 Article 3.2 Spectrum Usages EN300 328 -v EN-301 893 (Applicable to 5GHz high perfOrmance RI-AN). Year to begin affixing CE marking 2009. Easy Lai Ian ager Regulation Center, Acer Inc. Au . 15 2009 ate


FREE ENGLISH PDF

OPERATING INSTRUCTIONS

USER GUIDE – USER MANUAL

OWNER GUIDE – OWNER MANUAL

REFERENCE GUIDE – REFERENCE MANUAL

INSTRUCTION GUIDE – INSTRUCTION MANUAL

ACER H5360 (01) PDF MANUAL

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.