Post questions, comments, reviews or page errors in the comment box below.
PDF Content Summary:
****** Page 1 ****** Acer DLP Projector Pl 150/M306/PE-S45/F25S/AS329/ASV1712/ PR 120/MF-020/MS130/” 316/PE-X45/F25X/ AX329/ANX1711/PR220/MF-120/MXl 30/ P1350W/M326S/PE-W45S/F25WS/AW329S/ AWXI 710/PR320/MF-220/MW130/P1350WL/ M326/PE-W45/F25W/AW329/AWX1709/PR320T/ M F-220T/MW130L/X1123H/D800D/EV-S80H/ V50S/AS540/ASV1715/DX120/BS-020/KS330/ x 1223H/D810D/EV-X80H/V50X/AX540/ ANXI 714/DX220/BS-120/1<X330/X1323WH/ D820D/EV-W80H/V50W/AW540/AWX1713/ DX420/BS-320/KW330 Series User's Guide ****** Page 2 ****** Copyright 0 2017. Acer Incorporated. All Rights Reserved. Acer Projector User's Guide Original Issue: 06/2017 Changes may be made periodically to the information in th is publication without obligation to notify any person of such revisions or changes. Such changes will be incorporated in new editions of this manual or supplementary documents and publications. This company makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims the implied warranties of merchantability or fitness for a particular purpose. Record the model number, serial number, purchase date and place of purchase information in the space provided below. The serial number and model number are recorded on the label affixed to your projector. All correspondence concern ing your unit should include the serial number, model number and purchase information. No part of th is publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electron ically, mechanically, by photocopy, recording or otherwise, without the prior written permission of Acer Incorporated. Acer Projector Model number: Serial number: Date of purchase: Place of purchase: Acer and the Acer logo are registered trademarks of Acer Incorporated. Other compan iesl product names or trademarks are used herein for identification purposes only and belong to their respective companies. "HDMITM, the HDMI logo and High-Defin ition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC." ****** Page 3 ****** iii Information for Your Safety and Comfort Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. Turning the product off before cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. Caution for plug as disconnecting device Observe the following guidelines when connecting and disconnecting power to the external power supply unit: Install the power supply unit before connecting the power cord to the AC power outlet. Unplug the power cord before removing the power supply unit from the projector. If the system has multiple sources of power, disconnect power from the system by unplugging all power cords from the power supplies. Caution for Accessibility Be sure that the power outlet you plug the power cord into is easily accessible and located as close to the equipment operator as possible. When you need to disconnect power to the equipment, be sure to unplug the power cord from the electrical outlet. Warnings! Do not use this product near water. Do not place this product on an unstable cart, stand or table. If the product falls, it could be seriously damaged. Slots and openings are provided for ventilation to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should never be placed near or over a radiator or heat register, or in a built-in installation unless proper ventilation is provided. • Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind onto or into the product. ****** Page 4 ****** To avoid damage of internal components and to prevent battery leakage, do not place the product on a vibrating surface. Never use it under sporting, exercising, or any vibrating environment which will probably cause unexpected short current or damage rotor devices or lamp. Using electrical power This product should be operated from the type of power indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company. Do not allow anything to rest on the power cord. Do not locate this product where people will walk on the cord. If an extension cord is used with this product, make sure that the total ampere rating of the equipment plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure that the total rating of all products plugged into the wall outlet does not exceed the fuse rating. Do not overload a power outlet, strip or receptacle by plugging in too many devices. The overall system load must not exceed 80% of the branch circuit rating. If power strips are used, the load should not exceed 80% of the power strip's input rating. This product's AC adapter is equipped with a three-wire grounded plug. The plug only fits in a grounded power outlet. Make sure the power outlet is properly grounded before inserting the AC adapter plug. Do not insert the plug into a non-grounded power outlet. Contact your electrician for details. Warning! The grounding pin is a safety feature. Using a power outlet that is not properly grounded may result in electric shock and/or injury. Note: The grounding pin also provides good protection from unexpected noise produced by other nearby electrical devices that may interfere with the performance of this product. Use the product only with the supplied power supply cord set. If you need to replace the power cord set, make sure that the new power cord meets the following requirements: detachable type, UL listed/CSA certified, VDE approved or its equivalent, 4.5 meters (14.76 feet) maximum length. ****** Page 5 ****** Product servicing Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel. Unplug this product from the wall outlet and refer servicing to qualified service personnel when: the power cord or plug is damaged, cut or frayed liquid was spilled into the product the product was exposed to rain or water the product has been dropped or the case has been damaged the product exhibits a distinct change in performance, indicating a need for service the product does not operate normally after following the operating instructions Note: Adjust only those controls that are covered by the operating instructions, since improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal condition. Warning! For safety reasons, do not use non-compliant parts when adding or changing components. Consult your reseller for purchase options. Your device and its enhancements may contain small parts. Keep them out of the reach of small children. Additional safety information Do not look into the projector's lens when the lamp is on. The bright light may hurt your eyes. RG2 IEC 62471-5:2015 Turn on the projector first and then signal sources. Do not place the product in the following environments: Space that is poorly ventilated or confined. At least 50cm clearance from walls and free flow of air around the projector are necessary. Locations where temperatures may become excessively high, such as inside of a car with all windows rolled up. Locations where excessive humidity, dust, or cigarette smoke may contam inate optical components, shorten the life span and darken the image. Locations near fire alarms. Locations with an ambient temperature above 40 oc/104 OF ****** Page 6 ****** vi Locations where the altitudes are higher than 10000 feet. Unplug immediately if there is something wrong with your projector. Do not operate if smoke, strange noise or odor comes out of your projector. It might cause fire or electric shock. In this case, unplug immediately and contact your dealer. Do not keep using this product to break or drop it. In this case contact your dealer for inspection. Do not face the projector lens to the sun. It can lead to fire. When switching the projector off, please ensure the projector completes its cooling cycle before disconnecting power. Do not frequently turn off the main power abruptly or unplug the projector during operation. The best way is to wait for the fan to stop before turning main power off. Do not touch the air outlet grille and bottom plate which become hot. Clean the air filter frequently. The temperature inside may rise and cause damage when the filter/ventilation slots are clogged with dirt or dust Do not look into the air outlet grille when projector is operating. It may hurt your eyes. Always open the lens shutter or remove the lens cap when the projector is on. Do not block the projector lens with any object when the projector is under operation as this could cause the object to become heated and deformed or even cause a fire. To temporarily turn off the lamp, press HIDE on the remote control. Do not operate lamps beyond the rated lamp life. It could cause it to break on rare occasions. Contact your local dealer or Acer service center when you need to change the lamp. The product will detect the life of the lamp itself. Please contact your local dealer or Acer service center for changing the lamp, when lamp warning message displays. Do not attempt to disassemble this projector. There are dangerous high voltages inside which may hurt you. Do not stand the projector on end vertically. It may cause the projector to fall over, causing injury or damage. This product is capable of displaying inverted images for ceiling mount installation. Only use acer ceiling mount kit for mounting the projector and ensure it is securely installed. ****** Page 7 ****** vii Caution for Listening To protect your hearing, follow these instructions. Increase the volume gradually until you can hear clearly and comfortably. Do not increase the volume level after your ears have adjusted. Do not listen to music at high volumes for extended periods. Do not increase the volume to block out noisy surroundings. Decrease the volume if you can't hear people speaking near you . Disposal instructions Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle. For more information on the Waste from Electrical and Electronics Equipment (WEEE) regulations, visit acer-group.com/public/ Sustainabilitynndex.htm Mercury advisory For projectors or electronic products containing an LCD/CRT monitor or display: "Lamp(s) contain Mercury, Dispose Properly." Lamp(s) inside this product contain mercury and must be recycled or disposed of according to local, state or federal laws. For more information, contact the Electronic Industries Alliance at eiae.org. For lamp-specific disposal information, check lamprecycle.org ****** Page 8 ****** vili First Thing First Usage Notes Do: • Turn off the product before cleaning. • Use a soft cloth moistened with mild detergent to clean the display housing. • Disconnect the power plug from AC outlet if the product is not being used for a long period of time. Don't Block the slots and openings on the projector provided for ventilation. Use abrasive cleaners, waxes or solvents to clean the unit. Use under the following conditions: In extremely hot, cold or humid environments. In areas susceptible to excessive dust and dirt. Near any appliance that generates a strong magnetic field. Place in direct sunlight. Precautions Follow all warnings, precautions and maintenance as recommended in this user's guide to maximize the life of your unit. Warning: Do not look into the projector's lens when the lamp is on. The bright light may hurt your eyes. To reduce the risk of fire or electric shock, do not expose th is product to rain or moisture. Please do not open or disassemble the product as this may cause electric shock. The product will detect the life of the lamp itself. Please contact your local dealer or Acer service center for changing the lamp, when lamp warn ing message displays. When switch ing the projector off, please ensure the projector completes its cooling cycle before disconnecting power. Turn on the projector first and then the signal sources. Do not use lens cap when projector is in operation. When the lamp reaches the end of its life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn back on until the lamp module has been replaced. To replace the lamp, contact your local dealer or Acer service center. ****** Page 9 ****** Information for Your Safety and Comfort First Thing First Usage Notes Precautions Introduction Product Features Package Overview Projector Overview Projector Outlook Control Panel Remote Control Layout MHL Feature Introduction Getting Started Connecting the Projector Turning the Projector On/Off Turning On the Projector Turning Off the Projector Adjusting the Projected Image Adjusting the Height of the Projected Image How to Optimize Image Size and Distance How to Get a Preferred Image Size by Adjusting Distance and Zoom User Controls Installation Menu Onscreen Display (OSD) Menus Color Image Setting Management Audio Language Appendices iii viii vili vili 1 2 3 3 5 6 8 9 9 11 11 12 13 13 14 17 20 20 21 22 24 25 30 31 32 33 34 ****** Page 10 ****** Troubleshooting LED & Alarm Definition Listing Ceiling Mount Installation Specifications Compatibility Modes Regulations and safety notices 34 38 39 42 46 50 ****** Page 11 ****** 1 Introduction Product Features This product is a single-chip DLP@ projector, including the following outstanding features: DLP@ technology Pl 150/M306/PE-S45/F25S/AS329/PR120/M F-020/MS130/X1123H/D800D/EV- S80HN50S/AS540/DX120/BS-020/KS330: Native 800 x 600 SVGA resolution, Auto/4:3/16:9 aspect ratio supported Pl 1223H/D810D/EV- X80HN50X/AX540/DX220/BS-120/KX330: Native 1024 x 768 XGA resol ution, Auto/4:3/16:9 aspect ratio supported P1350W/M326S/PE-W45S/F25WS/AW329S/PR320/MF-220/MW130/P1350WL/ M326/PE-W45/F25W/AW329/PR320T/MF-220T/MW130L/X1323WH/D820D/ EV-W80HN50W/AW540/DX420/BS-320/KW330: Native 1280 x 800 WXGA resolution, Auto/Full/4:3/16:9/L.Box aspect ratio supported Enables projecting 3D content via DLP Link Technology: Blu-Ray 3D supported One-touch "3Di' button on remote control allows quick and easy access to the 3D functions Acer ColorBoost technology delivers vivid, life-like images High brightness and contrast ratio Versatile display modes enable optimum performance in any situation NTSC/PAUSECAM compatible and HDTV (720p, 1080i, 1080p) supported Lower power consumption and economy (ECO) mode extends lamp life Dynamic Black / ExtremeEco functions help decrease lamp power consumption and further extend lamp life. – Dynamic Black: If turned on, the projector dynamically adjusts the power consumption of the lamp according to the brightness of the image being projected. When projecting darker images the power consumption will be reduced and the contrast of the image will also be enhanced. – ExtremeEco: The projector will decrease the power consumption of the lamp by up to 70% when no input signal can be detected for 15 minutes. Acer EcoProjection Technology delivers Intelligent power management approach and physical efficiency improvement Advanced keystone correction delivers optimum presentations Multi-language Onscreen Display (OSD) menus Manual focus/zoom projection lens 0.8 2X digital zoom and pan move function Microsoft@Windows@ 2000, XP, 7, 8, 8.1, 10, Vista@, Macintosh OS, Chrome OS compliant CEC (Consumer Electronics Control) function supported LumiSense supported BluelightShield function supported ****** Page 12 ****** 2 Package Overview This projector comes with all the items shown below. Check to make sure you have them all. Contact your dealer immediately if any thing is missing. Projector HDMI cable (Optional) 000 oaoo 0000 cooo Remote control Carrying case (Optional) Power cord Acer Projector Security Card Security card (Optional) Quick start guide VGA cable (Optional) o User's guide (CD-ROM) (Optional) AAA Battery x 2 WirelessHD dongle kit (MWIHDI) (Optional) Note: The package content may differ by regions. ****** Page 13 ****** 3 Projector Overview Projector Outlook Front/upper side 1 2 3 2 escnp Ion Control panel Lens cap Power key and Power indicator LED Rear side o o 12 Ill 3 4 4 12 escnptlon 5678 10 5678 910 1 2 3 4 Audio input connector Audio output connector HDMI connector HDMI (MHL) connector Analog RGB signal/HDTV/ component video input connector 4 5 6 7 8 9 10 3 4 5 6 escriptlon Zoom ring and Focus ring Projection lens Remote control receiver Xl 123H/D800D/EV-S80H/V50S/ AS540/DX120/BS-020/KS330/ X1223H/D810D/EV-X80HN50X/ AX540/DX220/BS-120/KX330/ X1323WH/D820D/EV-W80H/ V50W/AW540/DX420/BS-320/ KW330 Pl 150/M306/PE-S45/F25S/AS329/ PR120/MF-020/MS130/P1250/ M316/PE-X45/F25X/AX329/PR220/ MF-120/MX130/P1350W/M326S/ PE-W45S/F25WS/AW329S/PR320/ MF-220/MW130/P1350WL/M326/ PE-W45/F25W/AW329/PR320T/ MF-220T/MW130L escnp Ion Mini USB connector Composite video input connector DC 5V output KensingtonTM lock port ****** Page 14 ****** 4 5 6 Description Monitor loop-through output connector (from VGA IN 1 only) RS232 connector 11 12 Description Power socket Tilt adjusting wheel ****** Page 15 ****** Control Panel 1 2 3 4 5 6 POWER LAMP ENTER TEMP URCE MENU 5 7 8 9 10 3 I 2 3 4 5 6 7 8 9 10 Function LAMP POWER Keystone Power key ENTER BACK TEMP SOURCE Four directional selection keys MENU Description Lamp indicator LED. Power indicator LED Adjusts image distortion caused by tilting projection (±40 degrees). Refer to the "Turning the Projector On/Off" section. Confirms your selection of items. Cancels your selection, or goes back to previous page. Temperature indicator LED. Changes the active source. Selects items or makes adjustments to your selection Launches the Onscreen Display (OSD) menu, returns to the previous step for the OSD menu operation or exits the OSD menu. ****** Page 16 ****** Remote Control Layout a,4ZK• 11 12 13 14 15 16 17 18 19 20 21 or UENU tooo pug, ' ooao o 10 oo 11 12 13 14 22 or 15 16 17 18 19 18 20 -21 escrip Ion ENTER 1 pgcn UEOIA 0000 MAX. INCHINA 11 12 13 15 16 17 18 19 18 20 MEN'O ccec•a•« ' 0000 po:uør 10 c€ic 1 2 3 5 6 Mode* No:V2501 Rating 3V — 60mA MAX coc MAOE IN CHINA MC..1PQ11.ffJ3 unction POWER RATIO Laser Keystone Fo ur /ll Play/Pause BACK • Stop FREEZE Refer to the “Turning the Projector On/Off” section. Chooses an aspect ratio. Emits visible laser pointer light for presentation purposes. This function is not available for the projectors sold in Japan/China. Adjusts image distortion caused by tilting projection (±40 degrees). Selects items or makes adjustments to your selection. Confirms your selection of items. Cancels your selection, or goes back to previous page. To pause the screen image.
****** Page 17 ****** 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 Function VGA PgUp/PgDn COMPONENT MEDIA Infrared transmitter 3D SOURCE MODE MENU HIDE HDMI/MHL ZOOM IN/ZOOM OUT VIDEO LAN/WiFi Keypad MUTE 7 Description To change source to VGA. This connection supports analog RGB, and YPbPr (480i/480p/576i/576p/720p/1080i/ 1080p). For computer mode only. Use this button to select the next or previous page. This function is only available when connected to a computer via a mini USB cable. (No function) (No function) Sends signals to the projector. Press to open the 3D menu for adjusting 3D settings. Changes the active source. Chooses a display mode. Launches the Onscreen Display (OSD) menu or exits the OSD menu. Press ” HIDE” to hide screen image; press again to display the image. To change source to HDMITM (or MHL). (for the model with HDMITM or MHL connector) Zooms the projector display in or out. To change source to composite video. (No function) Press “0—9” to input a password in the “Setting” > “Security” OSD. Mutes or unmutes the projector’s volume.
****** Page 18 ****** 8 MHL Feature Introduction When your smart device is connected to the projector, you can use some buttons on the remote control to control your smart device. Press “MODE” for one second to enter or leave the MHL control mode. After entering the MHL control mode, press “SOURCE” to switch between the navigation mode (default), media mode and numeric mode. 14 13 4 21 15 4 5 8 22 Function MODE SOURCE Four directional select keys Keypad MENU ENTER II Play/Pause BACK • Stop PgUp/PgDn MUTE escrip Ion Navigation Media mode Numeric mode mode Long press for one second to enter or leave the MHL control mode. After entering the MHL control mode, press to switch between the navigation mode (default), media mode and numeric mode. Up down Left Right Up down Left Right (No function) Goes to the root menu. Selects or enters items. Exits current page. (No function) (No function) (No function) (No function) (No function) (No function) Plays/Pauses/ Stops the playing of media files. Use this button to select the next or previous page. Mutes or unmutes the projector’s volume. (No function) (No function) (No function) (No function) Enters 0—9. (No function) (No function) (No function) (No function) (No function)
****** Page 19 ****** Getting Started Connecting the Projector VGA/HDMI USB DVD player, Set-top box, HDTV receiver :o RCA 9 Display 2 Speakers 2 2 Smartphone/ tablet O 3 DSub 5 a-Sub 3 3 1 7 4 11 5 o-Sub 10 ÖTÄÄ Video Output RS232 8 9 6 RS232 Cla 1 2 3 4 5 6 Description Power cord Audio cable HDMI (MHL) cable VGA to component video/HDTV adapter VGA cable USB cable 7 8 9 10 11 Description 3 RCA component cable Composite video cable RS232 cable WirelessHD dongle Wireless dongle Note: To ensure the projector works well with your comp uter,
****** Page 20 ****** 10 please make sure the timing of the display mode is compatible with the projector. Note: Some smart devices require a converter (supplied by the smart device maker) to enable the MHL function. Note: Compatible HDMI/MHL dongles: WirelessHD (MWIHDI), MWA3, Android (MWNDI), ChromecastTM.
****** Page 21 ****** 11 Turning the Projector On/Off Turning On the Projector 1 2 3 Ensure that the power cord and signal cable are securely connected. The Power LED will light red. Turn on the projector by pressing C) (POWER) on the control panel or remote control, and the Power indicator LED will turn blue. Turn on your source (computer, notebook, video player, etc.). The projector will detect your source automatically (when it is the first time you turn on the projector or the Source Selection function is “Auto”). If the screen displays ” No Signal” , please make sure the signal cables are securely connected. If you connect to multiple sources at the same time, use “SOURCE” on the control panel or remote control, or the direct source key on the remote control to switch between inputs.
****** Page 22 ****** 12 Turning Off the Projector 1 To turn the projector off, press the power button. This message appears: “Please press power button again to complete the shutdown process” Press the power button again. 2 The LED Power indicator will turn solid red to indicate standby mode. It is now safe to unplug the power cord. 3 When Instant Resume is selected. 1 2 3 4 The LED Power indicator will turn RED and blink rapidly after the projector is turned off, and the fan(s) will continue to operate for about 2 minutes to ensure that the system cools properly. As long as the power cord remains plugged in, you can press the power button to turn the projector immediately back on anytime during the 2-mjnute shutdown process. Once the system has finished cooling, the LED Power indicator will stop blinking and turn solid red to indicate standby mode. It is now safe to unplug the power cord. Warning indicators: “Projector Overheated. Lamp will automatically turn off soon. ” This onscreen message indicates that the projector has overheated. The lamp will automatically turn off, the projector will automatically shut down, and the LED Temp indicator will turn solid red. Contact your local dealer or service center. “Fan failed. Lamp will automatically turn off soon. ” This onscreen message indicates that the fan has failed. The lamp will automatically turn off, the projector will automatically shut down, and the LED Temp indicator will blink. Contact your local dealer or service center. Note: Whenever the projector automatically shuts down and the LED Temp indicator turns solid red, contact your local reseller or service center.
****** Page 23 ****** 13 Adjusting the Projected Image Adjusting the Height of the Projected Image The projector is equipped with two elevator feet for adjusting the image height. To raise the image: 1 Use the front Tilt adjusting wheel to raise the image to the desired height and angle. 2 Use the rear Tilt adjusting wheel to fine-tune the display angle. To lower the image: 1 Use the front Tilt adjusting wheel to lower the image to the desired height and angle. 2 Use the rear Tilt adjusting wheel to fine-tune the display angle. Tilt adjusting wheel Tilt adjusting wheel
****** Page 24 ****** 14 How to Optimize Image Size and Distance Consult the table below to find the optimal image sizes achievable when the projector is positioned at a desired distance from the screen. Pl 150/M306/PE-S45/F25S/AS329/PR 1201M 1 123H/D800D/EV- S80HN50S/AS540/DX120/BS-020/KS330/P1250/M316/PE-X45/F25X/AX329/ PR220/MF-120/MX130/X 1223H/D810D/EV-X80HN50X/AX540/DX220/BS-120/ KX330 If the projector is 3 m from the screen, good image quality is possible for image sizes between 69″ and 75″ Note: Remind as below figure, the space of 126 cm height is required when the projector is located at 3 m distance. n Size in Desired distance Minimum Screen Size (Min zoom) Desired From base to 75 Size 69″ Height; 115 c Height”. 126m F torn base to top of image Maximum Screen Size (Max zoom) Distance Diagonal Diagonal (m) 1.5 2 2.5 3 3.5 4 4.5 5 6 7 8 9 10 11 12 Zoom Ratio: (inch) W (cm)x H (cm) top of image (cm) 38 58 77 96 115 134 153 173 192 230 269 307 345 384 422 460 (inch) W (cm)x H (cm) 23 34 46 57 69 80 92 103 114 137 160 183 206 229 252 275 1.1 x 47 x 35 70 x 52 93 x 70 116 x 87 140K 105 163K 122 186K 140 209K 157 233K 174 279 x 209 326 x 244 372 x 279 419K 314 465 x 349 512K 384 558 x 419 25 38 50 63 75 88 100 113 126 151 176 201 226 251 276 301 51 x 38 77 x 57 102 x 77 128 x 96 153 x 115 179 x 134 204 x 153 230x 172 255 x 191 306 x 230 357 x 268 408 x 306 459 x 344 510 x 383 561 x 421 612 x 459 From base to top of image (cm) 42 63 105 126 147 168 189 210 253 295 337 379 421 463 505
****** Page 25 ****** 15 P1350W/M326S/PE-W45S/F25WS/AW329S/PR320/MF-220/MW130 If the projector is 3 m from the screen, good image quality is possible for image sizes between 89″ and 115″ . Note: Remind as below figure, the space of 170 cm height is required when the projector is located at 3 m distance. Size Olin screen Size Desired distance Minimum Screen Size (Min zoom) Desired From base to 89″ Height: 110 cm c Height”. 170cm From base to top of image Maximum Screen Size (Max zoom) Distance Diagonal Diagonal (m) 1.5 2 2.5 3 3.5 4 4.5 5 6 7 8 9 10 11 12 (inch) W (cm)x H (cm) top of image (cm) 44 66 88 109 131 153 175 197 219 263 307 350 394 438 482 525 (inch) W (cm)x H (cm) 30 44 59 74 89 103 118 133 148 177 207 237 266 296 325 355 Zoom Ratio: 1.3 x 64 x 40 96 x 60 127 x 80 159K 100 191 x 119 223K 139 255 x 159 287 x 179 318K 199 382 x 239 446 x 279 510K 318 573 x 358 637 x 398 701 x 438 764 x 478 38 58 77 96 115 134 153 173 192 230 269 307 345 384 422 460 83 x 52 124 77 165 x 103 207 x 129 248 x 155 289 x 181 331 x 207 372 x 232 413 x 258 496 x 310 579 x 362 661 x 413 744 x 465 826 x 517 909 x 568 992 x 620 From base to top of image (cm) 57 85 114 142 170 199 227 256 284 341 398 455 511 568 625 682
****** Page 26 ****** 16 P1350WL/M326/PE-W45/F25W/AW329/PR320T/MF-220T/MW130L/ X1323WH/D820D/EV-W80H/V50W/AW540/DX420/BS-320/KW330 If the projector is 3 m from the screen, good image quality is possible for image sizes between 82″ and 90″ Note: Remind as below figure, the space of 121 cm height is required when the projector is located at 3 m distance. Olin scr Desired distance Minimum Screen Size (Min zoom) Desired From base to 9 Height; 110 cm Height: 121 cm From base to top of image Maximum Screen Size (Max zoom) Distance Diagonal Diagonal (m) 1.5 2 2.5 3 3.5 4 4.5 5 6 7 8 9 10 11 12 (inch) W (cm)x H (cm) top of image (cm) 37 55 74 92 110 129 147 165 184 221 257 294 331 368 404 441 (inch) W (cm)x H (cm) 27 55 68 82 96 109 123 137 164 191 218 246 273 300 328 Zoom Ratio: 1.1 x 59 37 88 x 55 118 x 74 147 x 92 176K 110 206K 129 235 x 147 265 x 165 294K 184 353 x 221 412 x 257 471 x 294 529 x 331 588 x 368 647 x 404 706 x 441 30 45 60 75 90 105 120 135 150 180 210 240 270 300 329 359 65 x 40 97 x 60 129 x 81 161 x 101 194 x 121 226 x 141 258x 161 290x 181 323 x 202 387 x 242 452 x 282 516 x 323 581 x 363 645 x 403 710 x 444 774 x 484 From base to top of image (cm) 40 60 81 101 121 141 161 181 202 242 282 323 363 403 444 484
****** Page 27 ****** How to Get a Preferred Image Size by Adjusting Distance and Zoom The table below shows how to achieve a desired image size by adjusting either the position or the zoom ring. Pl 150/M306/PE-S45/F25S/AS329/PR 120/M F-020/MS 130/X 1 123H/D800D/EV- S80HN50S/AS540/DX120/BS-020/KS330/P1250/M316/PE-X45/F25X/AX329/ PR220/MF-120/Mx130/X 1223H/D81 OD/EV-X80HN50X/AX540/DX220/BS-120/ KX330 To obtain an image size of 70″ , set the projector at a distance between 2.8 m and 3.1 m from the screen and adjust the zoom level accordingly. 3.1 m Desired image size c -B 2.8 m Desired distance D istance (m) Height: 117 From base to top Of image Top (cm) Desired Image Size Diagonal (inch) 30 40 50 60 70 80 90 100 120 150 180 200 250 300 Zoom Ratio: 1.1 x W (cm) x H (cm) 61 x 46 81 x 61 102 x 76 122 x 91 142k 107 163 x 122 183 x 137 203 x 152 244 x 183 305 x 229 366 x 274 406 x 305 508 x 381 610 x 457 Max zoom 1.6 2.0 2.4 2.8 3.2 3.6 4.0 4.8 6.0 7.2 8.0 10.0 11.9 Min zoom 1.3 1.7 2.2 2.6 3.1 3.5 3.9 4.4 5.2 6.6 7.9 8.7 10.9 From base to top of image 50 67 101 117 134 151 168 201 251 302 335 419 503
****** Page 28 ****** 18 P1350W/M326S/PE-W45S/F25WS/AW329S/PR320/MF-220/MW130 To obtain an image size of 70″ set the projector at a distance between 1.8 m and 2.4 m from the screen and adjust the zoom level accordingly. 2.4 m c Desired Image Size Desired image size 1.8 m Desired distance D istance (m) Diagonal (inch) 30 40 50 60 70 80 90 100 120 150 180 200 250 300 Zoom Ratio: W (cm) x H (cm) 65 x 40 86 x 54 108 x 67 129 x 81 151 x 94 172k 108 194 x 121 215 x 135 258k 162 323 x 202 388 x 242 431 x 269 538 x 337 646 x 404 Max zoom 1.0 1.3 1.6 1.8 2.3 2.6 3.1 3.9 4.7 5.2 6.5 7.8 Min zoom 1.0 1.4 1.7 2.0 2.4 2.7 3.0 3.4 4.1 5.1 6.1 6.8 8.5 Height; 104 cm From base to top of image Top (cm) From base to top of image 44 59 74 89 104 118 133 148 178 222 267 296 370 444 1.3 x
****** Page 29 ****** 19 P1350WL/M326/PE-W45/F25W/AW329/PR320T/MF-220T/MW130L/ X1323WH/D820D/EV-W80H/V50W/AW540/DX420/BS-320/KW330 To obtain an image size of 70″ set the projector at a distance between 2.3 m and 2.6 m from the screen and adjust the zoom level accordingly. 2.6 m c Desired Image Size Desired image size 2.3 m Desired distance D istance (m) Diagonal (inch) 30 40 50 60 70 80 90 100 120 150 180 200 250 300 Zoom Ratio: 1.1 x W (cm)x H (cm) 65 x 40 86 x 54 108 x 67 129 x 81 151 x 94 172k 108 194 x 121 215 x 135 258k 162 323 x 202 388 x 242 431 x 269 538 x 337 646 x 404 Max zoom 1.3 1.7 2.0 2.3 2.7 3.0 3.3 4.0 5.0 6.0 6.7 8.3 10.0 Min zoom 1.1 1.5 1.8 2.2 2.6 2.9 3.3 3.7 4.4 5.5 6.6 7.3 9.2 Height: 94 cm From top Of •mage Top (cm) From base to top of image 40 54 67 81 94 108 121 135 162 202 242 269 337 404
****** Page 30 ****** 20 User Controls Installation Menu The Installation menu provides an Onscreen Display (OSD) for projector installation and maintenance. Use the OSD only when the message ‘INO signal ” is displayed on the screen or when the projector searches for input signal. 1 2 3 4 5 Turn on the projector by pressing d) (POWER) on the control panel or remote control. Press “MENU” on the control panel or remote control to launch the OSD for projector installation and maintenance. The background pattern acts as a guide to adjusting the calibration and alignment settings, such as screen size and distance, focus and more. Note: The OSD screenshot is for reference only and may differ from the actual design. The Installation menu includes several options. Use the up and down arrow keys to select an option, the left and right arrow keys to adjust selected option settings, and the right arrow key to enter a submenu for feature setting. The new settings will be saved automatically upon exiting the menu. Press “MENU” anytime to exit the menu and return to the Acer welcome screen.
****** Page 31 ****** 21 Onscreen Display (OSD) Menus The projector has multilingual Onscreen Display (OSD) menus that allow you to make image adjustments and change a variety of settings. Using the OSD menus To open the OSD menu, press ” MENU” on the control panel or remote control. When the OSD is displayed, use A v to select an item in the main menu. After selecting the desired main menu item, press to enter a submenu for feature setting Use A v to select the desired item and adjust the settings by using Select the next item to be adjusted in the submenu and adjust as described above. Press “MENU” on the control panel or remote control, the screen will return to the main menu. To exit the OSD menu, press i’ MENU” on the control panel or remote control again. It will close and the projector will automatically save the new settings. Main menu Submenu Color BluelightShield LumiSense Display Mode Wall Color Brightness Contrast Saturation Tint Color Temperature Gamma Exit Off Off Bri ght 50 50 0 O 50 CD 50 Setting ABC Select Enter Fruter Note: Some of the following OSD settings may not be available. Please refer to the actual OSD of your projector.
****** Page 32 ****** 22 Color BluelightShield LumiSense Display Mode Color Profile This function protects your eyes from over-exposure to blue light. The options are Off, Low, Medium, and High. Choose a preferred setting to reduce the level of blue light and get a comfortable viewing experience. When this function is enabled, LumiSense will be automatically set to “Off” The projector can intelligently optimizes the brightness and color saturation of projected image. The feature greatly enhances dark detail visibility and color saturation. Off: For normal mode. Normal: For enhancing the details in the dark area. Boost: For boosting brightness of the projected image. Dynamic Black: automatically optimizes the display of dark movie scenes enabling them to be shown in incredible detail. When this function is enabled, BluelightShield will be automatically set to “Off”. LumiSense function is unavailable when 3D is set to ” On ” There are many factory presets optimized for various types of images. Bright: For brightness optimization. Presentation: For meeting presentation with higher brightness. Standard: For common environment. Video: For playing video in a bright environment. Game: For game content. Education: For education environment. User 1/User 2: Memorize user’s settings. Available when User 1/User 2 is selected in the Display Mode menu. You can use one of the display modes as a starting point and customize the settings. The below OSD items can be adjusted and saved.
****** Page 33 ****** Wall Color Brightness Contrast Saturation Tint Color Temperature Gamma Rename 23 Use this function to choose a proper color according to the wall. There are several choices, including White, Light Yellow, Light Blue, Pink and Dark Green. It will compensate for the color deviation due to the wall color to show the correct image tone. Adjusts the brightness of the image. Press to darken the image. Press to lighten the image. Controls the degree of difference between the lightest and darkest parts of the picture. Adjusting the contrast changes the amount of black and white in the image. Press < to decrease the contrast. Press to increase the contrast. Adjusts a video image from black and white to fully saturated colors. to decrease the amount of color in the Press image. Press to increase the amount of color in the image. Adjusts the color balance of red and green. Press to increase the amount of green in the image. Press to increase the amount of red in the image. Adjusts the color temperature. At higher color temperatures, the screen looks colder; at lower color temperatures, the screen looks warmer. Effects the representation of dark scenery. With greater gamma value, dark scenery will look brighter. Available when User 1/User 2 is selected in the Display Mode menu. You can change User 1/User 2 to your preferred mode name in English letters. Note: "Saturation" and "Tint" functions are not supported under computer mode. ****** Page 34 ****** 24 Image Projection Mode Projection Location Aspect Ratio Front: The factory default setting. Ä] Rear: Reverses the image so you can project from behind a translucent screen. Auto: Automatically adjusts projection location of image. Desktop Ceiling: Turns the image upside down for ceiling- mounted projection. Use this function to choose your desired aspect ratio. Auto: Keeps the image with original width-height ratio and maximizes the image to fit native horizontal or vertical pixels. Full (for WXGA/1080p models): The image will be displayed making full use of the horizontal and vertical pixels. 4:3: The image will be scaled to fit the screen and displayed using a 4:3 ratio. 16:9: The image will be scaled to fit the screen and displayed using a 16:9 ratio. L.Box (for WXGA/1080p models): Keeps the original signal aspect ratio and zooms in by 1.333 times. Automatically adjusts image distortion caused by tilting Auto Keystone Manual Keystone Sharpness H. Position (Horizontal Position) projection (±40 degrees). Manually adjusts image distortion caused by tilting projection (±40 degrees). This function is unavailable when Auto Keystone is set to "On". Adjusts the sharpness of the image. Press Press Press Press to decrease the sharpness. to increase the sharpness. to move the image left. to move the image right ****** Page 35 ****** V. Position (Vertical Position) Frequency Tracking HDMI Color Range HDMI Scan Info 25 to move the image down. Press Press to move the image up. Changes the projector's refresh rate to match the frequency of your comp uter's graphics card. If you experience a vertical flickering bar in the projected image, use this function to correct it. Synchronizes the signal timing of the display with the graphics card. If you experience an unstable or flickering image, use this function to correct it. Adjusts the color range of the HDMI image data to prevent color display error. Auto: Automatically adjusts the color range by information from the player. Limited Range: Processes the input image as limited color range data. Full Range: Processes the input image as full color range data. Adjusts the overscan ratio of the HDMI image on screen. Auto: Automatically adjusts the overscan ratio by information from the player. Underscan: Always no overscan on the HDMI image. Overscan: Always keep overscan on the HDMI image. Note: "H. Position", "V. Position "Frequency" and "Tracking" functions are not supported under video mode. Note: "HDMI Color Range" and "HDMI Scan Info" are only available when the input signal is HDMI. Setting Use this function to select your desired startup screen. If you change the setting, it will take effect when you exit the OSD menu. Startup Screen • Acer: The default startup screen of your Acer projector. • User: Use the memorized picture from the "Screen Capture" function. ****** Page 36 ****** 26 Use this function to customize the startup screen. To capture the image that you want to use as the startup screen, follow the instructions below. Notice Before proceeding with the following steps, make sure that the "Keystone" is set to the default value "c) n and the projector is in its native resolution. Screen Capture Source Selection Closed Caption DC 5V Out VGA OUT (Standby) HDMI CEC Select "Screen Capture" to customize the startup screen. A dialog box appears to confirm the action. Choose "Yes" to use the current image as your customized startup screen. Choose No" to cancel the screen capture and exist the Onscreen Display (OSD). A message appears stating that the screen capture is in progress. When the screen capture is finished, the message disappears and the original display is shown. Manual: When switching input signals, you need to press USOURCE" on the control panel or remote control, or the direct source key on the remote control. Auto: The projector will detect your source automatically. Selects a preferred closed captioning mode from CCI, CC2, CC3, CC4 (CCI displays captions in the primary language in your area). Select " Off" to turn off the captioning feature. This function is only available when a composite video or S- Video input signal is selected and its system format is NTSC. Selecting " On" enables the function. The MHL port(s) and the DC 5V out port/USB A port (if available) on the projector can output 5V power when the projector is turned on. Only MHL port(s) will provide power output when MHL port(s) and USB A port are both plugged. Selecting "On" enables the function. The projector can output a VGA signal when it is in standby mode and the VGA IN (or VGA IN 1) and VGA OUT sockets are correctly connected to the devices. Enabling th is function increases the standby power consumption. Selecting "0ni' allows synchronized power ON/OFF operation between the projector and a CEC-compatible device connected to the HDMI/MHL port of the projector. This function is on ly available for the HDMI/MHL port. ****** Page 37 ****** Security 27 Security This projector provides a useful security function for the administrator to manage the projector. Press to change the "Security" setting. If the security function is enabled, your must enter "Administrator Password" first before changing the security setting. The factory default of "Administrator Password" is " 1234" . Select "On JJ to enable the security function. You have to enter password depending on the "Security Mode" . Please refer to "User Password" section for details. If "Off" is selected, you can switch on the projector without password. ****** Page 38 ****** 28 Security Timeout (Min.) Once "Security" is set to "On" , you can set timeout function. Press to select timeout duration. The range is from 10 to 990 minutes. When time is up, the projector will request you to enter the password again. The factory default setting of i' Timeout (Min.)" is i' Off" Once the security function is enabled, the projector will request you to enter password when switching on the projector. Both " User Password" and "Administrator Password" can be accepted for this dialogue. User Password Press to set up or change " User Password" Use the numerical keys on the remote control to set the password and press "ENTER" to confirm. To delete the digits, Press Control Panel,” and then double-click the “Display” icon. Select the “Settings” tab. Verify that your display resolution setting is lower than or equal to 1600 x 1200 or 1920 x 1080. Click the “Advanced Properties” button. If the problem still appears, change the mon itor display you are using and follow the steps below: Verify that the resolution setting is lower than or equal to 1600 x 1200 or 1920 x 1080. Click the “Change” button under the “Monitor” tab. Click “Show all devices > Standard monitor types” under the SP box, and choose the resolution mode you need under the ” Models” box. Verify that the resolution setting of the mon itor display is lower than or equal to 1600 x 1200 or 1920 x 1080.
****** Page 45 ****** 3 4 5 6 7 8 Partial, scrolling or incorrectly displayed image (For notebooks) The screen of the notebook computer is not displaying your presentation Image is unstable or flickering Image has vertical flickering bar Image is out of focus Image is stretched when displaying a “widescreen ” DVD title 35 For an incorrectly displayed image: Follow the steps for item 2 (above) to adjust the resolution of your computer. Press the toggle output settings. Example: Compaq [Fn]+[F4], Dell [Fn]+[F8], Gateway IBM HP NEC Toshiba If you experience difficulty changing resolutions or your monitor freezes, restart all equipment including the projector. If you are using a Microsofte Windowe based notebook: Some notebook PCs may deactivate their own screens when a second display device is in use. Each has a different way to be reactivated. Refer to your computer’s manual for detailed information. If you are using an Apple@ Maco OS based notebook: In System Preferences, open Display and select Video Mirroring “On.” Use “Tracking” to correct it. Refer to the Image” section for more information. Change the display color setting on your computer. Use “Frequency” to make an adjustment. Refer to the “Image” section for more information. Check and reconfigure the display mode of your graphics card to make it compatible with the projector. Adjust the focus ring on the projector lens. Make sure the projection screen is within the requ ired distance. (Refer to “Projection distance with clear focus” section for more information.) Refer to the ” How to Get a Preferred Image Size by Adjusting Distance and Zoom” section for more information. When you play a DVD encoded in anamorphic or 16:9 aspect ratio you may need to adjust the following settings: If you play a 4:3 format DVD title, please change the format to 4:3 with the projector OSD. If the image is still stretched, you will also need to adjust the aspect ratio. Set up the display format to 16:9 (wide) aspect ratio on your DVD player.
****** Page 46 ****** 36 9 10 11 Image is too small or too large Image has slanted sides Image is reversed Adjust the zoom lever on the top of the projector. Move the projector closer to or further from the screen. Press “MENU” on the control panel or remote control. Go to “Image” > “Aspect Ratio” and try different settings. If possible, reposition the projector so that it is centered on the screen and below the bottom of the screen. Press the Keystone correction keys on the control panel or remote control until the image becomes square. Press “MENU” on the control panel or remote control to open the OSD menu. Go to “Image” > “Auto Keystone” or “Image” > “Manual Keystone” to make adjustments. Select “Image” > “Projection Mode”, “Image” > “Projection Location ” on the OSD and adjust the projection direction. Problems with the Projector 2 Condition The projector stops responding to all controls Lamp burns out or makes a popping sound Solution If possible, turn off the projector, then unplug the power cord and wait at least 30 seconds before reconnecting power. Make sure that the control panel lock function is disabled. When the lamp reaches the end of its useful life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn on until the lamp module has been replaced. To replace the lamp, contact your local dealer or Acer service center.
****** Page 47 ****** OSD Messages Condition Message 37 Message Reminder Fan Fail – the system fan is not working. Fan Fail. Lamp will automatically turn off soon. Projector Overheated – the projector has exceeded its recommended operating temperature and must be allowed to cool down before it is used. Projector Overheated. Lamp will automatically turn off soon. Replace the lamp – the lamp is about to reach its maximum lifetime. Prepare to replace it soon. Lamp is approaching the end of its useful life in full power operation. Replacement suggested!
****** Page 48 ****** 38 LED & Alarm Definition Listing LED Messages Message Standby (Power cord plugged in) Power on Lamp retry Turning off (Cooling state) Turning off (Cooling completed) Firmware download Error (Thermal failure) Error (Fan lock failure) Error (Lamp breakdown) Error (Color wheel failure) Power LED Red Quick flash ing Blue Qu ick flashing LAMP LED Red Quick flashing TEMP LED Red Quick flashing
****** Page 49 ****** 39 Ceiling Mount Installation If you wish to install the projector using a ceiling mount, please refer to the steps below: 1 2 3 Drill four holes into a solid, structurally sound part of the ceiling, and secure the mount base. Choose the length combination based on actual environment. (CM-OIS doesn’t include Type 2 and Type 3.) Type 1 3 Type 2 11 3 Type 3 11 3 Type 1: For the standard size use three bracket screws to mount the projector to the ceiling mount bracket.
****** Page 50 ****** 40 4 5 Type 2 and Type 3: Alternatively, for the larger size, use the sliding extensions for more supports. Type 1 Type 2 Type 3 Note: It is recommended that you keep a reasonable space between the bracket and the projector to allow for proper heat distribution. Connect the main body connector to the projector bracket (illustration 1), and then screw up four screws (illustration 2). Illustration 1 Illustration 2 Adjust the angle and positioning as necessary. 3600
****** Page 51 ****** Diameter (mm) 41 Washer Type Small v Screw Type B 16. 5 Length (mm) 25 Large 4 O O 148.15 O 165 207 58.85 o 42 O 299.5 92.7 Unit: mm
****** Page 52 ****** 42 Specifications The specifications below are subject to change without notice. For final specs, please refer to Acer’s marketing documentation. Projection system Resolution Computer compatibility Video compatibility Aspect ratio Displayable colors DLPTM P 1150/M306/P E-S45/F25S/AS329/PR 120/MF-020/ MS 130/X1123H/D 800D/EV-S80HN50S/AS540/ DX120/BS-020/KS330: Native: SVGA (800 x 600) Maximum: UXGA (1600 x 1200), 1080p (1920 x 1080), WUXGA (1920 x 1200) (supports reduce blanking only) P 1250/M316/PE-X45/F25X/AX329/PR220/MF-120/ MX 130/X1223H/D810D/EV-X80HN50X/AX540/ DX220/BS-120/KX330: Native: XGA (1024 x 768) Maximum: UXGA (1600 x 1200), 1080p (1920 x 1080), WUXGA (1920 x 1200) (supports reduce blanking only) P 1350W/M326S/PE-W45S/F25WS/AW329S/PR320/ MF-220/MW130/P 1350WL/M326/PE-W45/F25W/ AW329/PR320T/MF-220T/MW130L/X1323WH/ D820D/EV-W80HN50W/AW540/DX420/BS-320/ KW330: Native: WXGA (1280 x 800) Maximum: UXGA (1600 x 1200), 1080p (1920 x 1080), WUXGA (1920 x 1200) (supports reduce blanking only) Refer to the “Compatibility Modes” section for more information. NTSC (3.58/4.43), PAL (MIN), PAL 60, SECAM, HDTV (720p, 1080i, 1080p), EDTV (480p, 576p), SDTV (480i, 576i) P 1150/M306/P E-S45/F25S/AS329/PR 120/MF-020/ MS 130/X1123H/D 800D/EV-S80HN50S/AS540/ DX120/BS-020/KS330/P1250/M316/PE-X45/F25X/ AX329/PR220/MF-120/MX130/X1223H/D810D/EV- X80HN50X/AX540/DX220/BS-120/KX330: Auto, 4:3 (native), 16:9 P 1350W/M326S/PE-W45S/F25WS/AW329S/PR320/ MF-220/MW130/P 1350WL/M326/PE-W45/F25W/ AW329/PR320T/MF-220T/MW130L/X1323WH/ D820D/EV-W80HN50W/AW540/DX420/BS-320/ KW330: Auto, 4:3, 16:9, Full, L Box 1.07 billion colors
****** Page 53 ****** Projection lens Projection screen size (diagonal) Projection distance with clear focus Throw ratio Horizontal scan rate Vertical refresh scan rate Keystone correction Digital zoom 43 P 1150/M306/PE-S45/F25S/AS329/PR 120/MF-020/ MS 130/X1123H/D 800D/EV-S80HN50S/AS540/ AX329/PR220/MF-120/MX130/X1223H/D810D/EV- X80HN50X/AX540/DX220/BS-120/KX330/ P 1350WL/M326/PE-W45/F25W/AW329/PR320T/ MF-220T/MW130L/X1323WH/D820D/EV-W80H/ V50W/AW540/DX420/BS-320/KW330: F = 2.56-2.68, f 22.0 mm -24.1 mm, 1:1.1 Manual Zoom and Manual Focus P 1350W/M326S/PE-W45S/F25WS/AW329S/PR320/ MF-220/MW130: F = 2.59 – 2.87, f = 16.88 mm -21.88 mm, 1:1.3 Manual Zoom and Manual Focus 60″ -300″ (152 cm – 762 cm) P 1150/M306/PE-S45/F25S/AS329/PR 120/MF-020/ MS 130/X1123H/D 800D/EV-S80HN50S/AS540/ DX120/BS-020/KS330/P1250/M316/PE-X45/F25X/ AX329/PR220/MF-120/MX130/X1223H/D810D/EV- X80HN50X/AX540/DX220/BS-120/KX330: W: 2.38 m – 7.15 m (7.8 – 23.51) T: 2.62 m – 7.87 m (8.6′ – 25.8′) P 1350W/M326S/PE-W45S/F25WS/AW329S/PR320/ MF-220/MW130: W: 1.57 m -4.71 m (5.21 – 15.51) T: 2.04 m – 6.12 m (6.7′ – 20.1′) P 1350WL/M326/PE-W45/F25W/AW329/PR320T/ MF-220T/MW130L/X1323WH/D820D/EV-W80H/ V50W/AW540/DX420/BS-320/KW330: W: 2 m -6 m (6.61 – 19.7′) T: 2.2 m – 6.6 m (7.21-21.71) P 1150/M306/PE-S45/F25S/AS329/PR 120/MF-020/ MS 130/X1123H/D 800D/EV-S80HN50S/AS540/ DX120/BS-020/KS330/P1250/M316/PE-X45/F25X/ AX329/PR220/MF-120/MX130/X1223H/D810D/EV- X80HN50X/AX540/DX220/BS-120/KX330: 1.96-2.15 (50″ ± 30/0@2m) P 1350W/M326S/PE-W45S/F25WS/AW329S/PR320/ MF-220/MW130: 1.57 (77″ ± 1.21 P 1350WL/M326/PE-W45/F25W/AW329/PR320T/ MF-220T/MW130L/X1323WH/D820D/EV-W80H/ V50W/AW540/DX420/BS-320/KW330: 1.55 – 1.7 (60″ ± @ 2 m) 15 – 100 KHz 24 – 120 Hz +/-40 Degrees (Vertical), Manual & Auto 0.8-2 x
****** Page 54 ****** 44 Audio Weight Dimensions (W x D x H) Power supply Power consumption Operating temperature 1/0 connectors P 1150/M306/P E-S45/F25S/AS329/PR 120/MF-020/ MS 130/X1123H/D 800D/EV-S80HN50S/AS540/ DX120/BS-020/KS330/X1223H/D810D/EV-X80H/ V50X/AX540/DX220/BS-120/KX330/X1323WH/ D820D/EV-W80HN50W/AW540/DX420/BS-320/ KW330: 3W speaker x 1 P 1250/M316/PE-X45/F25X/AX329/PR220/MF-120/ MX130/P1350W/M326S/PE-W45S/F25WS/ AW329S/PR320/MF-220/MW130/P 135 OWL/M326/ PE-W45Æ25W/AW329/PR320T/MF-220T/MW130L: IOW speaker x 1 Approximate 2.4 kg (5.29 lbs.) 299.5 x 220 x 91.6 mm (11.8″ x 8.7 “x 3.6″) 299.5 x 220 x 105.1 mm (11.8″ x 4.1”) (with tilt adjusting wheels) Universal AC input 100 – 240 V, input frequency 50/60 Hz Standard mode: 260 W @ 100 VAC ECO mode: 205 W @ 100 VAC Standby mode: < 0.5 W OOC to / to 1040F X 1123H/D 800D/EV-S80HN5 OS/AS540/DX 120/BS-020/ KS330/X1223H/D810D/EV-X80HN50X/AX540/DX220/ BS-120/KX330/X1323WH/D820D/EV-W80HN50W/ AW540/DX420/BS-320/KW330: Power socket x 1 USB (Type mini B) x 1 VGA input x 1 VGA output x 1 RS232x 1 3.5 mm audio jack input x 1 3.5 mm audio jack output x 1 Composite video x 1 HDMI x 1 P 1150/M306/PE-S45/F25S/AS329/PR 120/MF-020/MS 130/ P 1250/M316/PE-X45/F25X/AX329/PR220/MF-120/ MX 1350W/M326S/PE-W45S/F25WS/AW329S/ PR320/MF-220/MW130/P 1350WL/M326/PE-W45/F25W/ AW329/PR320T/MF-220T/MW130L: Power socket x 1 USB (Type mini B) x 1 VGA input x 2 VGA output x 1 RS232x 1 3.5 mm audio jack input x 1 3.5 mm audio jack output x 1 Composite video x 1 HDMI/MHL x 1 HDMI x 1 USB Type A (DC 5V OUT) x 1 ****** Page 55 ****** Standard package contents Accessory (optional) 45 AC power cord x 1 Remote control x 1 Battery x 2 (for the remote control) Quick start guide x 1 User's guide (CD-ROM) x 1 VGA cable x 1 HDMI cablex 1 Security card x 1 Carrying case x 1 WirelessHD dongle kit (MWIHDI) x 1 * Design and specifications are subject to change without notice. ****** Page 56 ****** 46 Compatibility Modes 1 VGA Analog – PC Signal 75.00 65.32 75.00 31.50 35.00 Mode VGA SVGA XGA SXGA QuadVGA SXGA+ UXGA PowerBook G4 Resolution 640 x 480 800 x 600 1024 x 768 1152 x 864 1280 x 1024 1280 x 960 1280 x 960 1400 x 1050 1600 x 1200 640 x 480 640 x 480 800 x 600 1024 x 768 1024 x 768 1152 x 870 V.Frequency [Hz] 60 72 75 85 120 56 60 72 75 85 120 60 70 75 85 120 70 75 85 60 72 75 85 60 75 60 60 60 66.6 (67) 60 60 75 75 H.Frequency [KHz] 31.47 37.86 37.50 43.27 61.91 35.20 37.88 48.08 46.88 53.67 77.43 48.36 56.48 60.02 68.68 98.96 63.85 67.50 77.10 63.98 76.97 79.98 91.15 60.00 37.88 48.36 60.241 68.681 ****** Page 57 ****** WXGA WSXGA+ acer 16:9 HD 1080 acer_timing WUXGA 1280 x 768 1280 x 768 1280 x 768 1280 x 720 1280 x 800 1280 x 800 – RB 1440 x 900 1680 x 1050 1366 x 768 1920 x 1080-RB 1920 x 1080-EIA 1024 x 600 1920 x 1200-RB 2 HDMI PC Signal Mode VGA 60 VGA 72 VGA 75 VGA 85 VGA 120 SVGA 56 SVGA 60 SVGA 72 SVGA 75 SVGA 85 SVGA 120 XGA 60 XGA 70 XGA 75 XGA 120 SXGA 75 SXGA 85 SXGA 60 SXGA 72 SXGA 75 SXGA 85 QuadVGA 75 Resolution 640 x 480 800 x 600 1024 x 768 1152 x 864 1280 x 1024 1280 x 960 60 75 85 60 60 120 60 60 60 60 60 60 59.95 V.Frequency (Hz] 59.94 72.809 75 85.008 119.518 56.25 60.317 72.188 75 85.061 119.854 60.004 70.069 75.029 119.804 75 84.99 60.02 72 75.025 85.024 75 47 47.78 60.29 68.63 45.00 49.70 101.6 55.94 65.29 47.71 66.60 67.50 37.50 74.04 H.Frequency [KHz] 31.469 37.861 37.5 43.269 61.91 35.156 37.879 48.077 46.875 53.674 77.425 48.363 56.476 60.023 98.958 67.5 77 63.981 76.97 79.976 91.146 75 ****** Page 58 ****** 48 15.73 31 47 15.63 31 25 45.00 37.50 33.75 28.13 67.50 56.26 27.00 26.97 33.75 SXGA+ 60 UXGA 60 Mac GA MAC13 Mac G4 Mac GA MAC19 MAC21 WXGA 60 WXGA 75 WXGA 85 WXGA 60 WXGA 60 WXGA 120-RB WXGA+ 60 1680×1050 60 acer 16:9 1920x 1080 RB 1920 x 1080 ElA acer_timing 1920 x 1200-RB 1400 x 1050 1600 x 1200 640 x 480@60Hz 640 x 480@67Hz 800 x 600@60Hz 1024 x 768@60Hz 1024 x 768@75Hz 1152 x 870@75Hz 1280 x 768 1280 x 720 1280 x 800 1280 x 800 1440 x 900 1680 x 1050 1366 x 768 1920 x1080 1920 x1080 1024 x 600 1920 x 1200 59.978 60 59.94 66.667 60.317 60.004 75.02 75.061 59.87 74.893 84.837 60 59.81 119.909 59.887 59.954 59.79 60 60 60 59.95 3 HDMI Video Signal 65.317 75 31.469 35 37.879 48.363 60.241 68.681 47776 60.289 68.633 45 49.702 101.563 55.935 65.29 47.712 66.587 67.5 37.5 74.038 H.Frequency [KHz] Mode 480i 480p 576i 576p 720p 720p 1 080i 1 080i 1080p 1080p 1080p 1080p 1080p Resolution 720 x 480 (1440 x 480) 720 x 480 720 x 576 (1440 x 576) 720 x 576 1280 x 720 1280 x 720 1920 x 1080 1920 x 1080 1920 x 1080 1920 x 1080 1920 x 1080 1920 x 1080 1920 x 1080 V.Frequency (Hz] 60 60 50 50 60 50 60 50 60 50 24 23.98 30 ****** Page 59 ****** 4 5 6 MHL Mode 480i 480p 576i 576p 720p 720p 1080i 1080i 1080p 1080p 1080p 1080p 1080p Video Signal Resolution 720 x 480 (1440 x 480) 720 x 480 720 x 576 (1440 x 576) 720 x 576 1280 x 720 1280 x 720 1920 x 1080 1920 x 1080 1920 x 1080 1920 x 1080 1920 x 1080 1920 x 1080 1920 x 1080 YPbPr Signal V.Frequency [Hz] 60 60 50 50 60 50 60 50 24 23.98 30 50 60 V.Frequency [Hz] Mode 480i 480p 576i 576p 720p 720p 1080i 1080i 1080p 1080p 1080p 1080p Mode NTSC PAL SECAM PAL-M PAL-N PAL-60 Resolution 720 x 480 720 x 480 720 x 576 720 x 576 1280 x 720 1280 x 720 1920 x 1080 1920 x 1080 1920 x 1080 1920 x 1080 1920 x 1080 1920 x 1080 Video, S-Video Signal V.Frequency [Hz] 15.73 15.63 15.63 15.73 15.63 15.73 15.73 59.94 59.94 50.00 50.00 60.00 50.00 60.00 50.00 60.00 50.00 24.00 23.98 H.Frequency 60 50 50 60 50 60 60 [KHz] NTSC4.43 49 H.Frequency [KHz] 15.73 31.47 15.63 31.25 45.00 37.50 33.75 28.13 27.00 26.97 33.75 56.26 67.5 H.Frequency [KHz] 15.73 31.47 15.63 31.25 45.00 37.50 33.75 28.13 67.5 56.26 27.00 26.97 fsc (MHz) 3.58 4.43 4.25 or 4.41 3.58 3.58 4.43 4.43 ****** Page 60 ****** 50 Regulations and safety notices FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the device and receiver. Connect the device into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/television technician for help. Notice: Shielded cables All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations. Notice: Peripheral devices Only peripherals (input/output devices, terminals, printers, etc.) certified to comply with the Class B limits may be attached to this equipment. Operation with non-certified peripherals is likely to result in interference to radio and TV reception. Caution Changes or modifications not expressly approved by the manufacturer could void the user Js authority, which is granted by the Federal Communications Commission, to operate this device. Operation conditions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, incl uding interference that may cause undesired operation. Notice: Canadian users This Class B digital apparatus complies with Canadian ICES-003. ****** Page 61 ****** 51 Remarque "intention des utilisateurs canadiens Cet appareil numérique de la classe B est conforme a la norme NMB-003 du Canada. Declaration of Conformity for EU countries Acer hereby, declares that this projector series is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Compliant with Russian regulatory certification 001 Radio device regulatory notice Note: The regulatory information below is for models with wireless LAN and/or Bluetooth only. General This product complies with the radio frequency and safety standards of any country or region in which it has been approved for wireless use. Depending on configurations, this product may or may not contain wireless radio devices (such as wireless LAN and/or Bluetooth modules). Canada — Low-power license-exempt radio communication devices (RSS-210) a b Common information Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device. Operation in 2.4 GHz band To prevent radio interference to the licensed service, this device is intended to be operated indoors and installation outdoors is subject to licensing. ****** Page 62 ****** 52 List of applicable countries Th is device must be used in strict accordance with the regu lations and constraints in the country of use. For further information, please contact a local office in the country of use. Please see ec.europa.eu/enterprise/rtte/implem.htm for the latest country list. ****** Page 63 ****** 53 acer Acer Incorporated 8F,88, see 1, Xintai 5th Xizhi New Taipei 221. Taiwan Declaration of Conformity we, Acer Incorporated 8F, 88, Sec. I, Xintai 5th Rd., Xizhi, New Taipei City 221, Taiwan And, Acer Italy s.r.l. Via Lepetit, 40, 20020 Lainate (MI) Italy Tel: +39-02-939-921, Fax: +39-02-9399-2913 acer.it Product: Trade Name: Model Number: Marketing Name: Projector Acer ASV1712/ANX1711/AWX1710/AWX1709/ASV1715/ ANX1714/AWX1713 P1150/PR120/MF-020/MS130/P1250/PR220/MF-120/ MX130/P1350W/PR320/MF-220/MW130[P1350WL/ PR320T/MF-220T/MW130L/X1123WDX120/BS-020/ KS330/X1223H/DX220/BS-120/KX330/X1323WH/DX420/ BS-320/KW330 We, Acer Incorporated, hereby declare under our sole responsibility that the product described above is in conformity with the relevant Union harmonization legislations as below Directive and following harmonized standards and/or other relevant standards have been applied: EN Class B EN 55024201(VAl :2015 LVDDir tiv •2 1 EN 1 :2010/A EN 50581:2012 @ Directive: 2009/' 25/F.c Regulation (EU) No. 617/ 2013 R lation No, EN 505642011 Year to begin affixing CE marking 2017. RU Jan/Sr. Manager Acer Incorporated (Taipei, Taiwan) EN 61000-3-212014 EN Regulation (EC) No. 278/2009; EN 5056±2011 June 14, 2017 Date ****** Page 64 ****** 54 acer Acer America Corporation 333 West San Carlos St., Suite 1500 San Jose, CA 95110 Tel: 254-298-4000 Fax: 254-298-4147 wv:w.acer.com Federal Communications Commission Declaration of Conformity This device complies with Palt 15 of the FCC Rules. Operation is subject to the following two conditions: (I) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The following local Manufacturer /lmporter is responsible for this declaration: Product: Model Number: Name of Responsible Patty Address of Responsible Party Contact Person: Phone No.. Fax No.. DLP Projector ASV1712/ANX1711/AWX1710/ AWXI 709/ASV1715/ANX1714/ AWXI 713 series Acer America Corporation 333 West San Carlos St. Suite 1500 San Jose, CA 95110 Acer Representative 254-298-4000 254-298-4147
FREE ENGLISH PDF
USER GUIDE – USER MANUAL
OWNER GUIDE – OWNER MANUAL
REFERENCE GUIDE – REFERENCE MANUAL
INSTRUCTION GUIDE – INSTRUCTION MANUAL