Post questions, comments, reviews or page errors in the comment box below.

Click here to download AAVIX A11405 (01) PDF MANUAL


PDF Content Summary:

****** Page 1 ****** OWNER’S 24 INCH 20V HEDGE TRIMMER FOR SERVICE CALL: WARNING : To reduce the risk of injury, user must read this manual before assembling, operating and maintaining this unit, You are responsible for operating the product properly & safely. Version: Vl.20171030

****** Page 2 ****** WARNING! READ ALL INSTRUCTIONS BEFORE OPERATING! Follow all instructions. Save all warnings and instructions for future reference. These instructions below are for your safety. Please read through them thoroughly before using. Familiarize yourself with them to reduce hazards like personal injuries and damage to property. TABLE OF CONTENTS Safety Rules Symbols Specifications Know Your Hedge Trimmer Assembly Operation Maintenance Troubleshooting…………………………………….. .2 .5 ..6 ..9 SAFETY RULES WARNING! Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains chemicals known to the state of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead-based paints; • Crystalline silica from bricks and cement and other masonry products and • Arsenic and chromium from chemically treated lumber. Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemical: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles. WARNING! This product maybe contains lead, phthalate or other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. Please wash your hands after use. GENERAL POWER TOOL SAFETY WARNINGS WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future The term “power tool” in the warnings refers to your electric (corded) power tool or battery operated (cordless) power tool. 1. WORK AREA SAFETY a) Keep work area clean and well lit. Cluttered or dark areas invite accidents. b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. c) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. 2

****** Page 3 ****** 2. ELECTRICAL SAFETY a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with grounded power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. b) Avoid body contact with grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is grounded. c) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock. e) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. f) If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock. 3. PERSONAL SAFETY a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. b) Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. c) Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energizing power tools that have the switch on invites accidents. d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. f) Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts. g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards. 4. POWER TOOL USE AND CARE a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. c) Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. g) Use the power tool, accessories and tool bits etc., in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. 3

****** Page 4 ****** 5. BATTERY TOOL USE AND CARE a) Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. b) Use power tools only with specifically designated battery pack. Use of any other battery packs may create a risk of injury and fire. c) When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fired) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns. 6. SERVICE a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. HEDGE TRIMMER SAFETY WARNINGS 1. Keep all parts of the body away from the cutter blade. Do not remove cut material or hold material to be cut when blades are moving. Make sure the switch is off when clearing jammed material. Blades coast after turn off. A moment of inattention while operating the hedge trimmer may result in serious personal injury. 2. Carry the hedge trimmer by the handle with the cutter blade stopped. When transporting or storing the hedge trimmer always fit the cutting device cover. Proper handling of the hedge trimmer will reduce possible personal injury from the cutter blades. 3. Hold the power tool by insulated gripping surfaces only, because the cutter blade may contact hidden wiring or its own cord. Cutter blades contacting a live wire may make exposed metal parts of the power tool live and could give the operator an electric shock. 4. Keep hands away from blade. Contact with blade will result in serious personal injury. 5. Use both hands when operating the hedge trimmer. Using one hand could cause loss of control and result in serious personal injury 6. Only use with handle and guard properly assembled to hedge trimmer. The use of the hedge trimmer without the proper guard or handle provided may result in serious personal injury 7. Check the hedge for foreign objects, e.g. wire fences GENERAL SAFETY WARNING FOR BATTERY PACK WARNING ! Risk of and burns. Do not disassemble, heat above 1000C (2120F), or incinerate. Do not expose cells or batteries to heat or fie. Avoid storage in direct sunlight. 2) Dispose of used battery promptly. When disposing of secondary cells or batteries, keep cells or batteries of different electrochemical systems separate from each other. 3) Keep battery out of reach of children and in original package until ready to use. 4) Never put batteries in mouth. If swallowed, contact your physician or local poison control center. 5) CAUTION — The battery used in this device may present a risk of fie or chemical burn if mistreated. Replace battery with (AAVIX) only. Use of another battery may present a risk of fire or explosion. 6) WARNING: Do not use a visibly damaged battery pack or appliance as applicable. 7) • WARNING! Do not modify or attempt to repair the appliance or the battery pack as applicable. 8) BATTERY MUST BE RECYCLED 9) Do not short-circuit a cell or battery. Do not store cells or batteries haphazardly in a box or drawer where they may short-circuit each other or be short-circuited by conductive materials. 10) Do not subject cells or batteries to mechanical shock. 1 1) Keep cells and batteries clean and dry. Wipe the cell or battery terminals with a clean dry cloth if they become dirty. 12) Do not maintain secondary cells and batteries on charge when not in use. 13) Retain the original cell and battery literature for 4

****** Page 5 ****** future reference. 14) Do not use any charger other than that specifically provided for use with the equipment. Secondary cells and batteries need to be charged before use. Always use the correct charger and refer to the manufacturer’s instructions or equipment manual for proper charging instructions. 15) When possible, remove the battery from the equipment when not in use. 16) Prevent unintentional starting. Ensure the switch is in the off-position before connecting to battery pack, picking up or carrying the appliance. Carrying the appliance with your finger on the switch or energizing appliance that have the switch on invites accidents. 1 7) Disconnect the battery pack from the appliance before making any adjustments, changing accessories, or storing appliance. Such preventive safety measures reduce the risk of starting the appliance accidentally. SYMBOLS To reduce the risk of injury, user must read instruction manual Wear ear protection Wear eye protection Wear dust mask Double insulation Do not expose to rain Wear protective gloves 18) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns. 19) Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained. MAX 450C/1130F Li-lon Remove plug from the mains immediately if the cable is damaged or cut Keep hands away from blades, Don’t touch the blades when starting or while operating the unit. Remove battery from the socket before carrying out any adjustment, servicing or maintenance. Do dispose of battery in household fire. Do not subject the battery to strong sunlight over long periods and do not leave it on a heater(max.450C /113FO) The charge is for indoor only. Protective temperature limiter. Li-lon battery, battery must be recycled. 5

****** Page 6 ****** SPECIFICATIONS Model# Motor Voltage Blade Length Max. Cutting Diameter Weight Protection Class Battery(Li-lon) Model# Max. Voltage * Capacity Charge Time Charger Model# Voltage Input Voltage Output A11405 20V 24inch(610mm) 3/4inch(19mm) 8.21bs(3.7kg) A112601 20V 2.0Ah Approx. Ihr A112701 120VAC, 60Hz 20VDC, 2.3A * Voltage measured without workload. Initial battery voltage reaches maximum of 20volts. Nominal voltage is 18volts. 6

****** Page 7 ****** KNOW YOUR HEDGE TRIMMER 2 3 4 5 6 7 8 10 1. Impact Guard 4. Front Handle 7. On/Off Switch 10. Battery Pack 11 2. Safety Guard 5. Up/Down Rotary Switch 8. Rotating Rear Handle 11. Battery Charger 3. Safety Switch 6. Rotating Handle Lock 9. Blade Cover ASSEMBLY BLADE COVER WARNING! Ensure the hedge trimmer is disconnected from the power supply before removing cover and preparing for use. Fitting and Removing the Blade Cover The hedge trimmer comes with a blade cover to protect the blades when storing. The blade cover must be removed prior to operation. 1. Slide the blade cover off the blade. 2. To fit, slide the cover back over the blade. WARNING! Never use the hedge trimmer with the blade cover fitted. SAFETY GUARD 1. Make sure that the safety guard is attached securely. BATTERY & CHARGER Do not expose the battery to extreme condition such as heat impact. Risk of injury from escaping electrolytic solution. After eye/skin contact rinse the affected area with water or a neutraliser and consult a doctor. Charge the battery in a dry room only. Prior to attaching the charger, check that the battery’s outer surface is clean and dry. There is a risk of injury due to electric shock. Only use the charger (AAVIX) to charge the cattery. Mind not to charge the appliance for more than 5 hour at a time. If you do, the battery and the appliance may be damaged and longer charging times would be a waste of energy. Excessive charging will void the warranty. Charge the battery before the first time of use. Do not briefly charge the battery several times in row. 1 . To remove the battery pack from the appliance, press the release button on the battery pull out the battery. 2. To insert the battery pack, place it on the guide track and push it back into the appliance. It will audibly snap in 3. Recharge the battery, when all the green light put out and only the last red light is bright on the battery pack. 7

****** Page 8 ****** 4. When charge is over, the red light on the battery charger from red to green. OPERATION CHECKS PRIOR TO OPERATION WARNING! Ensure the hedge trimmer is disconnected from the power supply before performing any of the following operations. If any parts are missing, damaged or broken, do not operate your Hedge trimmer until all damaged parts have been replaced or repaired. Failure to do so could result in serious personal injury. DO NOT USE WITHOUT HANDLE AND GUARD. 1. Check that the blades are not damaged. if so the blades will need to be replaced. WARNING! Make sure that the work area is free of rocks, debris, lines and other foreign objects. CONTROLS For user safety the safety switch and on/off switch must be operated simultaneously. 1. Using one hand depress and hold the safety switch on the front handle. 2. To turn on squeeze the on/off switch. 3. Once either the safety switch or on/off switch is released the hedge trimmer will stop. WARNING! Always use the hedge trimmer with both hands. Rotating the rear handle This hedge trimmer is fitted with a rotating rear handle. It can be rotated counter clockwise 450 and 900 and clockwise 450 and 900 1. To rotate the rear handle push the rotating handle lock and rotate the rear handle left or right to the desired position. Note: The handle has 5 positions, 450 and 900 to the left, 00 in the centre and 450 and 900 to the right. The rotating handle button will lock at any of these positions 2. To rotate the rear handle up or down to the desired position push the up/down rotary switch. USING THE HEDGE TRIMMER 1. Maintain proper footing and balance. Do not overreach. 2. Checking the battery charge level. The battery pack charge level in indicated by the charge state LED. Press the button for state of charge display on the battery pack. The LEDs indicates the battery’s charge level. 3. Squeeze both the safety switch and the on/off switch to start the trimmer. 8

****** Page 9 ****** 4. Use wide sweeping motions, feeding the blade teeth through the twigs. 5. A slight downward tilt will achieve the best results. 6. For trimming sides, begin at the bottom and sweep up. NOTE: Do not cut hedges when wet. (The best results are achieved when dry) MAINTENANCE WARNING! Ensure the hedge trimmer is disconnected from the power supply before performing any of the following operations. • When not in use, the Hedge Trimmer should be stored in a dry, frost free location not within the reach of children. • Keep ventilation slots of the Hedge Trimmer clean at all times and prevent any foreign matter from entering. • If the enclosure of the Hedge Trimmer requires cleaning do not use solvents but a moist cloth only. • There are no user serviceable parts in the Hedge Trimmer; if a fault is suspected or the supply cord requires replacement, return the Trimmer to a power tool repairer. • The blade rail should be cleaned and treated with light machine oil or spray lubricant (such as WD40, CRC 5.56 or RP7) after each use. When a job lasts for a longer period of time it is recommended that the blade rail also be treated with spray lubricant at regular intervals during operation. Note: Aavix will not be responsible for any damage or injuries caused by the repair of the hedge trimmer by an unauthorized person or by mishandling of the hedge trimmer. This tool is designed for DIY use – use in commercial or industrial environments will void the warranty. TROUBLESHOOTING Problem Blades are not cutting smoothly. Cause Blades could be worn or damaged Poor lubrication Remedy Contact customer service. Lubricate CARING FOR THE ENVIRONMENT Power tools that are no longer usable should not be disposed of with household waste but in an environmentally friendly way. Please recycle where facilities exist. Check with your local council authority for recycling advice. Recycling packaging reduces the need for landfill and raw materials. Reuse of recycled material decreases pollution in the environment. Please recycle packaging where facilities exist. Check with your local council authority for recycling advice. 9


FREE ENGLISH PDF

OPERATING INSTRUCTIONS

USER GUIDE – USER MANUAL

OWNER GUIDE – OWNER MANUAL

REFERENCE GUIDE – REFERENCE MANUAL

INSTRUCTION GUIDE – INSTRUCTION MANUAL

AAVIX A11405 (01) PDF MANUAL

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.