Post questions, comments, reviews or page errors in the comment box below.

Click here to download 3SIXT SNAP STICK (01) PDF MANUAL

PDF Content Summary:

****** Page 1 ****** O Bluetooth” SNAP STICK Wireless Smartphone Camera Stick with Bluetooth’ USER GUIDE

****** Page 2 ****** Getting familiar with your 3SlXT SNAP STICK Snap Stick Stopper LED Light Clamp Button USB Cable • USB Charging Port • ONIOFF switch : SIX SNAP STICK

****** Page 3 ****** GETTING STARTED for the first time The 3SlXT Snap Stick is based on Bluetooth HID* wireless communication technology – just pair, smile and snap. Charge Snap Stick for 60 minutes before use to maximise your timet using the supplied USB Cable The USB Cable can be inserted into a USB 2.0 or 3.0 port on a computer, USB wall or car charger. Also, before pairing, turn off nearby Bluetooth devices to avoid signal interference e.g. Bluetooth keyboards, mice, speakers etc. 1. For iOS smartphones (iPhone) 1. 2. 3. 5. Turn Snap Stick ON A blue LED light (O) should start flashing. Go to ‘Settings’ > ‘Bluetooth’ on your smartphone. Turn ‘Bluetooth’ ON or device Will automatically ‘Scan’. Wait for your device to find ‘kjstar’. Select ‘kjstar’ to pair Snap Stick with your Camera#. The blue LED light (O) should flash quickly to indicate that Snap Stick and your smartphone are paired. For Android smartphones (e.g. Samsung, HTC, LG, Nokia, Sony) 1. 2. 3. Turn Snap Stick ON A blue LED light (O) should start flashing Go to ‘Settings’ > ‘Bluetooth’ on your smartphone. Turn ‘Bluetooth’ ON or press ‘Scan’. For more informatior

****** Page 4 ****** 4. 5. Wait for your device to find ‘kjstar’. Select ‘kjstar’ to pair Snap Stick with your Camera#. The blue LED light (O) will continue to flash quickly to indicate that Snap Stick and your smartphone are paired. 2. 3. You must operate Snap Stick within 40 seconds from this pairing otherwise a re-start, re-scan and re-pajring of Snap Stick may be needed. Fixing your smartphone to the clamp (O) then Snap Stick (O) Place your device into the device clamp O). If your device is too smallt use the stopper Fix the device clamp onto the screw of the Snap Stick. Operating Snap Stick with your camera app 1. 2. 3. Go to your smartphone’s standard camera ap$ and make sure you can see yourself on the screen by pressing the camera flip icon-@ (iOS) or (Android) – if not already. Stretch the shaft of the Snap Stick to the desired length (up to 1 metre). Wait for you camera to auto-focus on you and click the ‘Press’ button Please note: Snap Stick automatically into ‘standby mode’ or sleep within 2 hours Of iractjvity, TO *wake’. press the Snap button (Snap Stick will awaken 5 seconds later). and support visit

****** Page 5 ****** INDICATIONS & TROUBLESHOOTING LED light does not light up when Snap Stick is turned ON Blue LED light flashes once Blue LED light keeps flashing quickly Blue LED light keeps flashing slowly Red LED light is on SPECIFICATIONS Working environment temperature Working environment relative humidity Battery capacity Charging voltage Charging time Standby time Autosleep/Standby There is no power left — charge Snap Stick Snap Stick is taking a photo Snap Stick is pairing with your device or Snap Stick is waking up from Standby/ Sleep Snap Stick’s battery is low – charge Snap Stick Snap Stick is charging -100 to 400 45mAH DC 5.OV 1 hour 100 hours 2 hours without use Bluetooth HID device a devtce providing the service of htman other data input and CiJtput to am] frcn’l a Bluetc.K)th HID Exanvles of guetCNJth HID devices are keymards„ mcg garnng cmtrollus, gamepads, rernote cmltrds, wmeters and temperature senscys *The of Snap suck to your carnera IS only needed once. If you ‘restore’ or ‘reset’ device to factory settings after ymu may have to re•pajr Snap Slick to your devtce ‘The standard camera agw:J iS app that came With tip deuce. Thlfd party cunera apps may behave according to Snap Sticks user Gildes instructitms.

****** Page 6 ****** > COMPATIBLE DEVICES O Bluetootli The Snap Stick is only compatible with SMART smartphones with Bluetooth version 3.0 or newer, running IOS 4.0 or newer and Android 3.0 or newer. > CAUTION & SAFETY • Please read the User Guide carefully before use • Please do not dismantle Snap Stick • Please do not use corrosive solvent to clean it • Do not charge Snap Stick under high temperature conditions • Do not use Snap Stick in wet or damp conditions Do not dispose Snap Stick into fire Do not knock or drop Snap Stick For more information visit The Buetooth@ word mark and logos are reestered trademarks owned by Buetooth SIG. Inc. iPod, iPhme. iPad are tracÉmarks of Apple Inc.. regstered In U.S. other cmlntrtes.








Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.