Free English XLINE WCF300 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD XLINE WCF300 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What are the safety precautions to observe when using the XLINE WCF300 WALL CHARGER?
Always read the operating manual carefully before using the XLINE WCF300 WALL CHARGER.
Use the XLINE WCF300 WALL CHARGER according to its intended purpose and the information in the user manual.
Do not interfere with or change the design of the XLINE WCF300 WALL CHARGER as it is dangerous and threatens with electric shock and loss of warranty.
Protect the XLINE WCF300 WALL CHARGER from falls and shocks.
When disconnecting the XLINE WCF300 WALL CHARGER from the electrical outlet, grab the plug, never grab the cable.
Protect the XLINE WCF300 WALL CHARGER from contamination and soiling.
Do not expose the XLINE WCF300 WALL CHARGER to moisture and overheating.
Only use the XLINE WCF300 WALL CHARGER indoors and in dry environments.
Do not connect or disconnect the XLINE WCF300 WALL CHARGER from the socket with wet hands.
Do not connect a damaged XLINE WCF300 WALL CHARGER or power cord to the power supply.
Connect the XLINE WCF300 WALL CHARGER to the power supply according to the data provided on the nameplate.
Portable devices should be charged in a well ventilated room only.
The XLINE WCF300 WALL CHARGER may be used by mentally and/or physically handicapped persons and persons without knowledge of or experience in operation of this device type, provided that they are supervised or instructed in safe operation, with clear understanding of all related risks.
After use, always disconnect the XLINE WCF300 WALL CHARGER from the power supply.
Do not insert any objects into the sockets of the XLINE WCF300 WALL CHARGER, except for the plugs intended for this purpose.
Keep the XLINE WCF300 WALL CHARGER out of reach of children.
The XLINE WCF300 WALL CHARGER is not a toy. Children should not play with the device.
How do I start up and operate the XLINE WCF300 WALL CHARGER?
The XLINE WCF300 WALL CHARGER is designed for AC 100-240 V mains voltage.
Insert the plug into an easily accessible electrical socket.
Connect the external device using a matching cable (not included). Connect the plug of the USB-A or USB-C cable to the matching charger socket, and then the other end of the cable to the external (charged) device.
The XLINE WCF300 WALL CHARGER will automatically start to charge the portable device matching the required characteristics.
After charging the device, unplug the mains plug of the charger from the socket.
What is the maximum output power when charging two devices simultaneously with the XLINE WCF300 WALL CHARGER?
Please note that when charging two devices at the same time, the max. output power of the XLINE WCF300 WALL CHARGER is 15W.
What should I do to clean and store the XLINE WCF300 WALL CHARGER?
Before cleaning, unplug the mains plug from the socket. Use a dry cloth made of soft material to clean the housing.
Store the unused XLINE WCF300 WALL CHARGER in a dry and safe place, not exposed to high temperatures, sunlight and other hazards.
What are the technical specifications for the XLINE WCF300 WALL CHARGER?
The technical data for the XLINE WCF300 WALL CHARGER is provided in the following table:
|
Data Point |
Specification |
|
Device model: |
WCF300* |
|
Input voltage: |
100-240V~ |
|
Input voltage and current: |
0.8A |
|
Input AC frequency: |
50/60Hz |
|
USB-C output voltage, current and power: |
5.0V 3.0A 15W 9.0V 3.0A 27W 12.0V 2.5A 30W 15.0V 2.0A 30W 20.0V 1.5A 30W |
|
USB-A output voltage, current and power: |
5.0V 3.0A 15W 9.0V 2.0A 18W 12.0V 1.5A 18W |
|
USB-C + USB-A output voltage, current and power: |
5.0V 3.0A, 15W Total |
|
Average operating efficiency: |
84.64% |
|
Low load (10%) efficiency: |
82.45% |
|
Standby power consumption: |
0.060W |
What are the components described in the device description of the XLINE WCF300 WALL CHARGER?
The device description of the XLINE WCF300 WALL CHARGER includes the following components:
1. Mains Plug
2. USB-C socket
3. USB-A socket
What should I do if the XLINE WCF300 WALL CHARGER is not charging a device?
If the XLINE WCF300 WALL CHARGER is not charging, check the following causes and solutions:
|
PROBLEM |
CAUSE |
SOLUTION |
|
Charger does not charge. |
Faulty charger. |
Pay attention to the external appearance of the XLINE WCF300 WALL CHARGER, whether there is any mechanical damage to its housing or USB sockets. |
|
Charger does not charge. |
Charging cable damaged. |
Replace the charging cable. |
|
Charger does not charge. |
Incorrect installation of the charging cable in the USB socket of the charger or the mains plug in the electrical socket. |
Make sure that the power cord and the AC plug supplying the XLINE WCF300 WALL CHARGER are installed correctly. |
What factors influence the charging speed of mobile devices when using the XLINE WCF300 WALL CHARGER?
The charging speed of mobile devices depends on the cable used and the charging capacity of the mobile device itself when using the XLINE WCF300 WALL CHARGER.
POWER DELIVERY/ QC FUNCTIONS of the XLINE WCF300 WALL CHARGER will only operate with devices supporting the respective systems.
CLICK HERE TO DOWNLOAD XLINE WCF300 (01) PDF DOCUMENT