WORX WX366.9 (01) PDF MANUAL


Post questions, comments, reviews or errors in the comment box below.

Your File is Ready … Download PDF

CLICK HERE TO DOWNLOAD WORX WX366.9 (01) PDF MANUAL


PDF Content Summary: SAFETY AND OPERATING MANUAL ORIGINAL INSTRUCTIONS Lithium-Ion hammer drill cordless WX366.3 WX366.4 WX366 WX366.5 WX366.1 WX366.2 WX366.9 GENERAL POWER TOOL SAFETY WARNINGS WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery- operated (cordless) power tool. 1. WORK AREA SAFETY a) Keep work area clean and well lit. Cluttered or dark areas invite accidents. b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. c) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. 2. ELECTRICAL SAFETY a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. c) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock. e) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. f) If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock. 3. PERSONAL SAFETY a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. b) Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. c) Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents. d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. g) If devices are provided for the connection of dust extraction and collection facilities, 2 ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards. 4. POWER TOOL USE AND CARE a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. c) Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. Lithium-Ion cordless hammer drill WX366 WX366.1 WX366.2 WX366.3 WX366.4 WX366.5 WX366.9 If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. 5. BATTERY TOOL USE AND CARE a) Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. b) Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire. c) When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire. d) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns. 6. SERVICE a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. DRILL SAFETY WARNINGS 1. Wear ear protectors when impact drilling. Exposure to noise can cause hearing loss. 2. Use auxiliary handle(s), if supplied with the tool. Loss of control can cause personal injury. 3. Hold power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring. Cutting accessory contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock. SCREW DRIVER AND IMPACT WRENCH SAFETY WARNING 1. Hold power tool by insulated gripping surfaces, when performing an operation where the fastener may contact hidden wiring. Fasteners contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock. ADDITIONAL SAFETY RULES FOR DRILL 1. Do over not 40store oC. the battery pack in temperatures 2. Always temperatures temperature charge is 0 the 18 oC oto C battery to 30 24 oC. opack C. Ideal between charging SAFETY WARNINGS FOR BATTERY PACK a) Do not dismantle, open or shred cells or battery pack. b) Do not short-circuit a battery pack. Do not store battery packs haphazardly in a box or drawer where they may short-circuit each other or be short-circuited by conductive materials. When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire. c) Do not expose battery pack to heat or fire. Avoid storage in direct sunlight. d) Do not subject battery pack to mechanical shock. e) In the event of battery leaking, do not allow the liquid to come into contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice. f) Seek medical advice immediately if a cell or battery pack has been swallowed. g) Keep battery pack clean and dry. h) Wipe the battery pack terminals with a clean dry cloth if they become dirty. i) Battery pack needs to be charged before use. Always refer to this instruction and use the correct charging procedure. j) Do not maintain battery pack on charge when not in use. k) After extended periods of storage, it may be necessary to charge and discharge the battery pack several times to obtain maximum performance. l) Battery pack gives its best performance when it is operated at normal room temperature (20°C ± 5°C). m) When disposing of battery packs, keep 3 Lithium-Ion cordless hammer drill WX366 WX366.1 WX366.2 WX366.3 WX366.4 WX366.5 WX366.9 battery packs of different electrochemical systems separate from each other. n) Recharge only with the charger specified by WORX. Do not use any charger other than that specifically provided for use with the equipment. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. o) Do not use any battery pack which is not designed for use with the equipment. p) Keep battery pack out of the reach of children. q) Retain the original product literature for future reference. r) Remove the battery from the equipment when not in use. s) Dispose of properly. 4 Lithium-Ion cordless hammer drill WX366 WX366.1 WX366.2 WX366.3 WX366.4 WX366.5 WX366.9 SYMBOLS To reduce the risk of injury, user must read instruction manual Warning Wear ear protection Wear eye protection Wear dust mask Do not expose to rain or water. Do not burn Li-Ion Do not dispose of batteries, Return exhausted batteries to your local col- lection or recycling point. Wear protective gloves. Lock Hammer drilling Screwdriving Drilling Wood Metal Brick High speed Low speed Waste electrical products must not be disposed of with household waste. Please recycle where facilities exist. Check with your local authorities or retailer for recycling advice. 5 Lithium-Ion cordless hammer drill WX366 WX366.1 WX366.2 WX366.3 WX366.4 WX366.5 WX366.9 3 1 2 849 56 76 A1 A2 1 2 1 3 2 Lithium-Ion hammer drill cordless WX366.3 WX366.4 WX366 WX366.5 WX366.1 WX366.2 WX366.9 C1 A3 B1 3 B2 2 3 1C2C3 D E121 7 Lithium-Ion cordless hammer drill WX366 WX366.1 WX366.2 WX366.3 WX366.4 WX366.5 WX366.9

D E1 1-18 E2F E3 8

Lithium-Ion cordless hammer drill WX366 WX366.1 WX366.2 WX366.3 WX366.4 WX366.5 WX366.9 NOISE INFORMATION A weighted sound pressure LpA: 78dB(A) A weighted sound power LwA: 89dB(A) KPA& KWA 3.0dB(A) Wear ear protection when sound pressure is over 80dB(A) VIBRATION INFORMATION Vibration total values (triax vector sum) determined according to EN 60745: Impact drilling into concrete 1. CHUCK 2. TORQUE ADJUSTMENT RING 3. TWO-SPEED GEAR CONTROL 4. FORWARD/REVERSE ROTATION CONTROL 5. SOFT GRIP HANDLE 6. BATTERY PACK * 7. BATTERY PACK RELEASE BUTTON 8. SIGHT LIGHT 9. ON/OFF SWITCH * Not all the accessories illustrated or described are included in standard delivery. Vibration emission value ah,ID = 4,247m/s2 TECHNICAL DATA Uncertainty K = 1,5m/s2 Type WX366 WX366.1 WX366.2 WX366.3 WX366.4 WX366.5 WX366.9 (3-designation of Drilling into metal machinery, representative of hammer drill) WX366 WX366.1 WX366.2 WX366.3 WX366.4 WX366.5 Vibration emission value ah,D = 3,008m/s2 Uncertainty K = 1,5m/s2 The declared vibration total value may be used for WX366.9 comparing one tool with another, and may also be used in a preliminary assessment of exposure. WARNING: The vibration emission value during Charger voltage 100-240V ~50/60Hz actual use of the power tool can differ from the declared value depending on the ways in which the tool Rated voltage 20V Max** is used dependant on the following examples and other variations on how the tool is used: No load speed 0-350 / 0-1300/min How the tool is used and the materials being cut or drilled. Impact rate 0-5600 / 0-20800/min The tool being in good condition and well maintained The use the correct accessory for the tool and ensuring it Number of clutch position 18+1+1 is sharp and in good condition. The tightness of the grip on the handles and if any anti vibration accessories are used. Max torque 30N.m And the tool is being used as intended by its design and Chuck capacity 10mm these instructions. This tool may cause hand-arm vibration syndrome Max. if its use is not adequately managed. drilling capacity WARNING: To be accurate, an estimation of exposure level in the actual conditions of use should take account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle but not actually doing the job. This may significantly reduce the exposure level over the total working period. Helping to minimize your vibration exposure risk. ALWAYS use sharp chisels, drills and blades. Maintain this tool in accordance with these instructions and keep well lubricated (where appropriate). If the tool is to be used regularly then invest in anti vibration accessories. 9 Steel 10mm Wood 30mm Brickwork 10mm Concrete 8mm Machine weight 1.3kg 0.95kg ** Voltage measured without workload. Initial battery voltage reaches maximum of 20 volts. Nominal voltage is 18 volts. Lithium-Ion hammer drill cordless WX366.3 WX366.4 WX366 WX366.5 WX366.1 WX366.2 WX366.9 Plan your work schedule to spread any high vibration tool use across a number of days. ACCESSORIESWX366 WX366.1 WX366.2 Charger(WA3860) 1 1 / Battery pack (WA3551.1) 1 1 / Charger (WA3760) / / 1 Battery (WA3550.1) / / 1 Battery(WA3549.1) / / / Double ended bit 1 1 1 WX366.3 WX366.4 WX366.5 WX366.9 Charger (WA3860) / / / / Battery pack (WA3551.1) / / / / Charger (WA3760) 1 1 1 / Battery (WA3550.1) / 2 2 / Battery (WA3549.1) 2 / / / Double ended bit 1 1 1 / We recommend that you purchase your accessories from the same store that sold you the tool. Refer to the accessory packaging for further details. Store personnel can assist you and offer advice. OPERATING INSTRUCTIONS NOTE: Before using the tool, read the instruction book carefully. INTENDED USE The machine is intended for driving in and loosening screws as well as for drilling in wood, metal and plastic. ASSEMBLY AND OPERATION ACTION FIGURE BEFORE OPERATION Removing the battery pack See Fig. A1 Charging the battery See Fig. A2 Installing the battery pack See Fig. A3 ASSEMBLY CHUCK ADJUSTMENT WARNING: Always lock off trigger switch and disconnect tool from power source when changing accessories. Always ensure the bit is secure before starting the tool. Damage to the Chuck or a loose bit may cause possible personal injury. --Removing the bits See Fig. B1 --Inserting the bits See Fig. B2 OPERATION FORWARD/REVERSE ROTATION CONTROL WARNING: Never change the direction of rotation when the chuck is rotating, wait until it has stopped! See Fig.C1, C2, C3 TWO-SPEED GEAR CONTROL See Fig. D 10 TORQUE ADJUSTMENT SCREWDRIVING, DRILLING, HAMMER DRILLING Lithium-Ion cordless hammer drill See Fig. E1, E2, E3 OPERATING THE ON/OFF SWITCHWARNING: Do not operate for long periods at See Fig. F low speed because excess heat will be produced internally. LED LIGHT INDICATOR (See Fig. F) To turn on the light, press the on/off switch and make sure the forward/reverse rotation control is on right/ left position. When you release the on/off switch, the light will be off. LED lighting increases visibility-great for dark or enclosed area. LED is also a battery capacity indicator. It will flash when power gets low. WARNING: To turn on the light, press the On/ Off switch and make sure the Forward/Reverse Rotation Control is on right/left position. PROBLEM SOLUTION 1. WHY DOES THE DRILL NOT TURN ON WHEN YOU PRESS THE SWITCH? The Forward and Reverse Switch, which is on top of the trigger, is positioned in the lock function. Unlock the Forward and Reverse Switch putting it into the WX366 WX366.1 WX366.2 WX366.3 WX366.4 WX366.5 WX366.9 DECLARATION required rotation position. Push the trigger and the drill will start to rotate (See Fig.B). 2. THE DRILL STOPS BEFORE THE SCREW IS COMPLETELY TIGHTENED. WHY? Verify the torque position of the Torque Adjustment Ring, you can find the Torque Adjustment Ring OF CONFORMITY We, Positec Power Tools (Europe) Ltd, PO Box 6242, Newbury, RG14 9LT, UK between the Chuck and the drill body. Position 1 is the lowest torque (screw driving force) and position 18 is the highest torque (screw driving force). Position is for drill operation. Position is for hammer drill operation.Regulate the Torque Adjustment Ring to a higher position to reach the best result (See Fig.E). Declare that the product, Description WORX Cordless Hammer Drill Type WX366 WX366.1 WX366.2 WX366.3 WX366.4 WX366.5 WX366.9 (3-designation of machinery, representative of Hammer drill) Function Drilling 3. I CAN NOT FIT THE BATTERY INTO THE BATTERY CHARGER. WHY? The battery can be inserted into the charger only in one direction. Turn the battery around until it can be inserted into the slot, the red LED Light should turn on Complies with the following Directives, 2006/42/EC 2011/65/EU 2014/30/EU when the battery is charging. Standards conform to 4. REASONS FOR DIFFERENT BATTERY PACK WORKING TIMES Charging time problems, as above, and having not used a Battery Pack for a prolonged time will reduce the Battery Pack working time. This can be corrected EN 55014-1 EN 55014-2 EN 60745-1 EN 60745-2-1 EN 60745-2-2 after several charge and discharge operations by charging & working with your drill. Heavy working conditions such as large screws into hard wood will use up the Battery Pack energy faster than lighter working conditions. Do not re-charge your Battery The person authorized to compile the technical file, Name Jim Kirkwood Address Positec Power Tools (Europe) Ltd, PO Box 6242, Newbury, RG14 9LT, UK Pack below 0oC and above 45oC as this will affect performance. MAINTENANCE Remove the Battery Pack from the tool before carrying out any adjustment, servicing or maintenance. Your power tool requires no additional lubrication or maintenance. There are no user serviceable parts in your power tool. Never use water or chemical cleaners to clean your power tool. Wipe clean with a dry cloth. Always store your power tool in a dry place. Keep the motor ventilation slots clean. Keep all working controls free 2017/12/8 Allen Ding Deputy Chief Engineer, Testing & Certification Positec Technology (China) Co., Ltd 18, Dongwang Road, Suzhou Industrial Park, Jiangsu 215123, P. R. China of dust. Occasionally you may see sparks through the ventilation slots. This is normal and will not damage your power tool. ENVIRONMENTAL PROTECTION Waste electrical products must not be disposed of with household waste. Please recycle where facilities exist. Check with your local authorities or retailer for recycling advice. 11 Lithium-Ion cordless hammer drill WX366 WX366.1 WX366.2 WX366.3 WX366.4 WX366.5 WX366.9 After-sales Service and Application At http://www.worx.com you can order spare parts or arrange the collection of a product in need of servicing or repair. Tel. Service: 0345 202 9679 E-Mail: customerservices@worxtools.com http://www.worx.com Copyright © 2017, Positec. All Rights Reserved. AR01018203


FREE ENGLISH PDF

OPERATING INSTRUCTIONS

USER GUIDE - USER MANUAL

OWNER GUIDE - OWNER MANUAL

REFERENCE GUIDE - REFERENCE MANUAL

INSTRUCTION GUIDE - INSTRUCTION MANUAL

Leave a Reply