Free English WE-VIBE SYNC 3000-01 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD WE-VIBE SYNC 3000-01 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What are the components and controls of the WE-VIBE SYNC 3000-01?
The WE-VIBE SYNC 3000-01 features the following components and control points:
| Component | Description |
| External/clitoral stimulator | The part of the device designed for external stimulation. |
| Internal/G-spot stimulator | The part of the device designed for internal vaginal and G-spot stimulation. |
| Control button | Main button located on the clitoral stimulator to power the device and change modes. |
| Charging contacts | Metallic points used to connect the device to its charging base. |
| Indicator light | Visual signal for battery status and charging progress. |
| On/intensity up | Top button on the remote used to turn the device on or increase vibration intensity. |
| Change modes | Middle button on the remote used to cycle through different vibration patterns. |
| Off/intensity down | Bottom button on the remote used to decrease intensity or turn the device off. |
How do I charge the WE-VIBE SYNC 3000-01?
To charge the WE-VIBE SYNC 3000-01, place the device onto the charging base ensuring the charging contacts are aligned. A full charge can take up to 2 hours, depending on the remaining battery levels. You do not need to completely drain the battery before recharging.
Note: When using a computer USB port, the device will not charge if the computer enters sleep mode. You can use any standard USB power adapter for charging.
What do the indicator lights mean on the WE-VIBE SYNC 3000-01?
The indicator light on the WE-VIBE SYNC 3000-01 provides the following status information:
Slow blink: Low battery level.
Fast blink: The device is currently charging.
Light stays on: The device is fully charged.
Light is off: There is no power, or the device is not properly placed on the charging base.
LED blinks once every 5 seconds: The device is too hot (+45 degrees Celsius) to charge. Charging will resume automatically once it reaches a safe temperature.
How do I clean and maintain the WE-VIBE SYNC 3000-01?
Wash the WE-VIBE SYNC 3000-01 with We-Vibe Clean or with mild soap and water. Avoid using cleaning products that contain alcohol, petrol, or acetone. Do not boil, bake, microwave, or place the device or its charging base in a dishwasher.
How do I turn the WE-VIBE SYNC 3000-01 on and off?
To turn on the WE-VIBE SYNC 3000-01, press the control button located on the clitoral stimulator part of the device.
To turn the device off, press and hold down the control button on the clitoral stimulator for 2 seconds.
How do I change the vibration modes on the WE-VIBE SYNC 3000-01?
Once the WE-VIBE SYNC 3000-01 is turned on, you can change the vibration mode by pressing the control button again. Each press will cycle to the next available mode.
What are the different vibration modes available on the WE-VIBE SYNC 3000-01?
The WE-VIBE SYNC 3000-01 features the following vibration patterns:
| Low | Pulse |
| Medium | Wave |
| High | Echo |
| Ultra | Tide |
| Crest | Surf |
How do I use the WE-VIBE SYNC 3000-01 during intercourse?
Step 1: Choose your favorite vibration mode.
Step 2: Apply a water-based lubricant to the device.
Step 3: Gently insert the internal G-spot stimulator into the vagina.
Step 4: Rest the external clitoral stimulator against the clitoris.
Step 5: Have your partner join you to have sex and share the vibrations.
How can I adjust the fit of the WE-VIBE SYNC 3000-01?
The WE-VIBE SYNC 3000-01 has two adjustable points to target the G-spot and clitoris with varying levels of pressure.
Adjusting the clitoral stimulator: Opening it will create a looser fit, while closing it creates a tighter fit. Hold the stimulator firmly in one hand and use your other thumb to apply pressure at the bend to open or close it.
Adjusting the G-spot stimulator: Hold the stimulator with both hands. Use both thumbs to apply pressure on the underside to bend it down slightly. To bend it up toward the clitoral stimulator, use the opposite motion with your fingers and thumbs.
Important: The device is designed to be adjusted to fit you once and then enjoyed. Avoid bending it repeatedly or rapidly during a single session.
How do I pair the WE-VIBE SYNC 3000-01 with its remote?
Step 1: Hold down the control button on your WE-VIBE SYNC 3000-01 for 5 seconds until it pulses twice.
Step 2: Hold down any button on the remote for 5 seconds.
Step 3: The device will pulse once when it is successfully paired with the remote. The remote operates within a range of 3 meters (10 feet).
Note: The device can only be paired with one controller at a time. If you pair it with a smartphone, you must re-pair it to use the remote again.
How do I pair the WE-VIBE SYNC 3000-01 with the We-Connect app?
Step 1: Download the We-Connect app on your smartphone.
Step 2: Open the app and follow the on-screen instructions for pairing.
Step 3: Once paired, you can use the app to control the device or send an invite to a partner to share control.
How do I replace the battery in the WE-VIBE SYNC 3000-01 remote?
Step 1: Remove the battery cover from the back of the remote control.
Step 2: Take out the old battery and replace it with a new CR2032 button cell battery.
Step 3: Replace the battery cover. Do not attempt to charge the remote’s non-rechargeable batteries.
Note: The remote is water-resistant, not waterproof. If water enters, open it, remove the battery, and drain the water. Let it dry completely before replacing the battery and using it again.
What safety warnings and usage restrictions apply to the WE-VIBE SYNC 3000-01?
Please adhere to the following safety guidelines for the WE-VIBE SYNC 3000-01:
The device is sold as an adult novelty only and is not intended for medical use.
It is not intended for use by children or persons with reduced physical, sensory, or mental capabilities.
Do not use the charger near water to avoid electric shock.
Do not use the device on swollen or inflamed areas of the skin.
Discontinue use immediately if discomfort occurs.
Do not use the device on the neck area.
Do not use the device with silicone lubricants as they will damage the product material.
Do not store the device in extreme temperatures.
CLICK HERE TO DOWNLOAD WE-VIBE SYNC 3000-01 (01) PDF DOCUMENT