UTILITECH 148008 (01) Image

FREE ENGLISH UTILITECH 148008 (01) PDF DOCUMENT.
FREE ENGLISH UTILITECH 148008 (01) PDF USER GUIDE.
FREE ENGLISH UTILITECH 148008 (01) PDF USER MANUAL.
FREE ENGLISH UTILITECH 148008 (01) PDF OWNER GUIDE.
FREE ENGLISH UTILITECH 148008 (01) PDF OWNER MANUAL.
FREE ENGLISH UTILITECH 148008 (01) PDF REFERENCE GUIDE.
FREE ENGLISH UTILITECH 148008 (01) PDF INSTRUCTION GUIDE.
FREE ENGLISH UTILITECH 148008 (01) PDF REFERENCE MANUAL.
FREE ENGLISH UTILITECH 148008 (01) PDF INSTRUCTION MANUAL.
FREE ENGLISH UTILITECH 148008 (01) PDF OPERATING INSTRUCTIONS.


CLICK HERE TO DOWNLOAD UTILITECH 148008 (01) PDF DOCUMENT

If this is not the document you want for this product, click here to see if we have any other documents for this product.

How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.

NO IMAGE CONTENT AT THIS TIME. PLEASE CHECK BACK LATER

How should I position the UTILITECH 148008 pump relative to the water source?

Set the UTILITECH 148008 pump as close as possible to the water source, keeping the vertical distance from the water to the pump as short as possible and no more than 20 ft.

A foot valve with a strainer (not provided) should be installed at the end of the suction hose or pipe to maintain prime during operation.


How do I connect the hoses to the UTILITECH 148008 pump?

Connect a garden hose or 1-in pipe to the pump inlet and outlet.


How do I prime the UTILITECH 148008 pump?

1. Remove the priming nut on the pump.

2. Fill the cavity with water.

3. Reinstall the priming nut.


What are the steps to start the UTILITECH 148008 pump?

1. Turn the switch to the ‘off’ position.

2. Plug the power into a GFCI outlet.

3. Turn the switch to the ‘on’ position to begin pumping.


What is the primary safety warning for the UTILITECH 148008 pump?

WARNING: FOR YOUR PROTECTION, ALWAYS DISCONNECT PUMP FROM POWER SOURCE BEFORE HANDLING.


CLICK HERE TO DOWNLOAD UTILITECH 148008 (01) PDF DOCUMENT


Leave comments, questions, reviews, tips, tricks, hacks or page errors below. Account not required.