Free English TP-LINK ARCHER T2U (03) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD TP-LINK ARCHER T2U (03) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What is the TP-LINK ARCHER T2U used for?
The TP-LINK ARCHER T2U wireless USB adapter connects your computer to a Wi-Fi network for smooth HD video, voice streaming, and online gaming.
What do the LED statuses mean on the TP-LINK ARCHER T2U?
You can check the working status of the TP-LINK ARCHER T2U using the following table:
| Status | Indication |
|---|---|
| Off | The driver has not been installed or the adapter’s radio has been disabled. |
| Flashing Slowly | The driver has been installed but no data is being transmitted or received. |
| Flashing Quickly | Data is being transmitted or received. |
What should I do if the LED on my TP-LINK ARCHER T2U is off?
If the LED is off, try these troubleshooting tips:
1. Check if the adapter is recognized and enabled or not.
2. Remove and reinsert the TP-LINK ARCHER T2U.
3. Reinstall the software, if necessary.
How do I connect the TP-LINK ARCHER T2U to a computer?
Before you start using your TP-LINK ARCHER T2U, insert the adapter into a USB port on your computer directly.
How do I install the driver for the TP-LINK ARCHER T2U on Windows?
1. Insert the resource CD into your CD drive and run the Autorun.exe from the pop-up Autoplay window. Note: In some operating systems, the CD screen will pop up automatically. Otherwise, run the CD manually.
2. Select TP-LINK ARCHER T2U and follow the instructions to complete the installation. Note: If you cannot install the driver successfully, disable the antivirus software and firewall, then try again.
3. When the confirmation screen appears, the driver has been installed successfully.
How do I join a wireless network using the TP-LINK ARCHER T2U on Windows?
You can join a wireless network via the Windows built-in wireless utility:
1. Click the network icon on the taskbar. Select the Wi-Fi network you want to join, and click Connect. Enter the network password when prompted.
2. When the network icon changes to indicate a connection, it means the TP-LINK ARCHER T2U has successfully connected to the network.
How do I uninstall the driver for the TP-LINK ARCHER T2U on Windows?
For Windows 8/8.1/10: Go to the Start menu to find the TP-Link application. Click Uninstall TP-LINK ARCHER T2U Driver, then follow the on-screen instructions to complete the uninstallation.
For Windows XP/7: Go to Start > All Programs > TP-Link > Uninstall TP-LINK ARCHER T2U Driver. Follow the on-screen instructions to complete the uninstallation.
How do I join a wireless network on Mac OS X using the TP-LINK ARCHER T2U?
You can use the TP-Link Utility to join a network:
1. Open TP-Link Utility and select the Site Survey tab. Then select the network you want to join from the list and click CONNECT.
2. The Authentication/Encryption screen displays. If your network uses wireless security, enter the Wi-Fi password of the network and click OK.
3. After successfully connecting, you will see a symbol in front of your network’s SSID.
How do I connect the TP-LINK ARCHER T2U using WPS on Mac OS X?
For PBC mode:
1. Press the WPS/QSS button on your router or access point.
2. Within 2 minutes, open TP-Link Utility, click the WPS tab, and click PBC.
For PIN mode:
1. Open TP-Link Utility and click the WPS tab. Note the PIN displayed. Select the network from the WPS AP List and click PIN.
2. Within 2 minutes, log in to the web management page of your router or access point, go to its WPS page, enter the PIN of the TP-LINK ARCHER T2U in the corresponding field, and click Connect.
How do I uninstall the driver and utility for the TP-LINK ARCHER T2U on Mac OS X?
1. Double click Uninstall.command in the downloaded folder.
2. A command window will pop up. Type the password of the root user to uninstall the software.
3. Wait until “Process completed” shows up, then restart your computer to finish the uninstallation.
What should I do if my TP-LINK ARCHER T2U is not detected?
If the TP-LINK ARCHER T2U is not detected, check the following:
1. Make sure the adapter is securely connected to the computer.
2. Make sure you meet the minimum system requirements and that the latest Windows and system updates are installed.
3. Make sure you use the latest driver for your specific adapter.
4. Try a different USB port on the computer.
5. Try restarting the computer or try using the TP-LINK ARCHER T2U on a different computer.
How do I check if I have successfully installed the driver for the TP-LINK ARCHER T2U?
1. On your computer, right-click the Computer icon and go to Manage.
2. Open the Device Manager and go to Network adapters.
3. Find the corresponding TP-LINK ARCHER T2U adapter, right-click it, and go to Properties.
4. If you see “This device is working properly,” you have successfully installed the driver.
What should I do if I cannot connect to Wi-Fi after installing the driver for the TP-LINK ARCHER T2U?
1. Check if you have successfully installed the driver.
2. Make sure the TP-LINK ARCHER T2U is securely connected to the computer.
3. Disable the antivirus software and firewall, then try again.
4. Try a different USB port on the computer.
5. Restart your computer and try again.
6. Reinstall the driver and try again.
How do I find the hardware version of the TP-LINK ARCHER T2U?
The hardware version is printed on the product label on the package or the TP-LINK ARCHER T2U adapter. There is a character string “Ver:X.Y” (for example, Ver:2.0) in the Serial Number field, and the number X is the hardware version of the adapter.
CLICK HERE TO DOWNLOAD TP-LINK ARCHER T2U (03) PDF DOCUMENT