SERENELIFE SLSPAMT26FB (01) PDF Document

The main functions of the Bubble Massage Mat for the SERENELIFE SLSPAMT26FB are bubble oxygen massages the back of the human body and an ion air purification.

The Inflatable Bathtub Dimensions (L x W x H) for the SERENELIFE SLSPAMT26FB are 66″ x 29.9″ x 25.9″ -in.

The Bubble Massage Mat Dimensions (L x W) for the SERENELIFE SLSPAMT26FB are 49.2″ x 16.92″ -in.

The Weight Capacity for the SERENELIFE SLSPAMT26FB is 345 lbs.

The Bubble Machine Voltage for the SERENELIFE SLSPAMT26FB is 120V.

The Remote Control Battery Material for the SERENELIFE SLSPAMT26FB is Mercury-Free Button Carp Manganese Battery.

The Battery Model is CR2032.

The Battery Capacity is 200mAh.

The Battery Rated Voltage is 3V.

Features of the SERENELIFE SLSPAMT26FB include:

Thick Inflatable Base and Zip Cover

Featured with Backrest and Armrests Support

Comes with Inflatable Pillow for Seating or Back Support

Strong and Durable, Made of PVC Material

With Convenient Cup Holder

Designed to Lay on Bathtub Floor

Connected with Air Hose that Delivers Massaging Bubbles

Safety Power Function

Built-in Heater that Creates a Soothing and Warming Experience

Equipped with Suction Cups for Non-Slip Comfort

Include Remote Control to Adjust Different Light Colors

2 Color-Changing Lights Pipe

Equipped with Drain Valve for Easy Water Removal

Modern, Sleek and Comfortable Design

Easy to Store and Transport when Deflated

Non-toxic and Environmentally Friendly Materials

Lightweight and Easy to Use

User-Friendly Control Panel

Adjustable Bubble Intensity Levels

Equipped with Safety System to Prevent Overheating and Accidental Water Leakage

What’s in the Box for the SERENELIFE SLSPAMT26FB:

(1) Inflatable Bathtub

(1) Bubble Machine

(1) Remote Control

(1) Plastic Drain

The indoor environment where this machine is used must be equipped with leakage protection device and use qualified power socket.

When using the SERENELIFE SLSPAMT26FB, ensure that the bathtub bubble machine is placed on the plane, and keep a certain distance from the water source. It is strictly prohibited to use it in places with high humidity.

When used with the machine, the indoor environment should not be too humid, and the power supply must be equipped with leakage protection device.

The elderly and children under the age of 13 should use this product under the care of their parents.

The following people or those with the following conditions should not use this product (within 30 minutes after meal, excessive hunger, severe physical failure, severe water shortage, high fever, massive blood loss, hypertension, heart disease, suppurative ulcer, new wound, drunkenness, unconsciousness, menstruation and pregnancy).

Person using medication should consult a physician before using the SERENELIFE SLSPAMT26FB.

No child of any age should ever use a bathtub unless supervised by an adult.

After use of the SERENELIFE SLSPAMT26FB, unplug the power plug immediately and remove the connection with the bath bucket to avoid the danger of the water in the bath bucket flowing back into the machine.

When the machine power cord is damaged or other parts of the machine fail, cut off the power supply in time, contact the dealer and return it to the manufacturer’s professional for repair. Do not repair or modify the bathtub bubble machine by yourself.

In colder areas, soak the SERENELIFE SLSPAMT26FB in warm water for a while before first use, and then open it for installation after the material becomes soft. Direct opening may damage the bathtub.

Please clean the SERENELIFE SLSPAMT26FB product with warm water for the first time. Do not use corrosive cleaning agents.

When injecting water into the SERENELIFE SLSPAMT26FB, please inject cold water first and then hot water, or adjust the hot water to the water temperature suitable for bathing and inject it directly. The maximum water level shall not exceed one-half according to personal needs.

When filling the SERENELIFE SLSPAMT26FB bathtub with water, do not touch the hot water above 50°C/122°F, so as not to cause the air bag to bulge.

The water temperature of the bath for the SERENELIFE SLSPAMT26FB is generally between 35-42 degrees. It is better to take a bath for 15-20 minutes.

Please drain the water after bathing the SERENELIFE SLSPAMT26FB. Please do not store water for a long time to avoid deformation of the bathtub.

Make sure that the area under or around the SERENELIFE SLSPAMT26FB bathtub is free of sharp objects.

Step 1: Connect the two supports as a whole, and insert the six supports into the support port of the bath barrel in turn.

Step 2: Insert 6 shaped rubber strips in sequence.

Step 3: Slide the connectors on the support respectively to fix the shaping strip of the bath barrel.

Step 4: Slide the connector on the support to fix the whole bath barrel shaping strip and check it.

Step 7: When installing the shelf, align the notch on the shelf with the bath barrel support frame.

Step 5: Connect the breather pipe to the machine.

Step 6: Connect the inflation connector fitting to the vent pipe.

Step 9: Connect the machine firmly with the wave making air inlet of the bath barrel.

Step 8: Align the inflating accessories with the air ring to inflate the bath barrel, and put the air nozzle cover on the back cover.

Step 10: Place the bath bucket on the hard ground easy to drain and add water.

Step 11: Twist down the vent pipe on the machine as a drain pipe and connect it to the drain of the bath barrel.

Step 12: If you need to extend the drainage pipe, please connect it in this way.

Step 1: Identify Machine accessories.

Step 2: Connect the breather pipe to the machine.

Step 3: Connect the inflation connector fitting to the vent pipe.

Step 4: Install the machine and prepare to inflate the bathtub.

Step 5: Connect the minimum air pump to inflate the bathtub back.

Step 6: First inflate the back of the bathtub.

Step 7: Use the corresponding inflation head to inflate the bathtub body in turn.

Step 8: After filling, cover the air nozzle to prevent air leakage.

Step 9: Connect the machine firmly with the wave making air inlet of the bath barrel.

Step 10: Place the bath bucket on the hard ground easy to drain and add water.

Step 11: Twist down the vent pipe on the machine as a drain pipe and connect it to the drain of the bath barrel.

Step 12: If you need to extend the drainage pipe, please connect it in this way.

The technical specifications for the SERENELIFE SLSPAMT26FB are detailed in the following table:

Additional specifications:

Bubble Massage Mat Main functions: bubble oxygen massages the back of human body, an ion air purification.

Specification 1: 124*43cm, Suitable for 1.7m bathtub with 104 jets

Specification 2: 100*43cm, Suitable for 1.5m bathtub with 90 jets

The Inflatable Bathtub Voltage is 120V, and its No-load power is 600W.

The Bubble Massage Mat Voltage is 120V.

The Negative Ion power for both is 1W.

The device for the SERENELIFE SLSPAMT26FB has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

This device for the SERENELIFE SLSPAMT26FB complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

When installing the water tank for the SERENELIFE SLSPAMT26FB, the inflation pipe can only be filled with normal air at normal temperature, which can be saturated by 80%.

This product for the SERENELIFE SLSPAMT26FB is not a life-saving appliance. It is forbidden to use it when it is launched into the water.