SAMSUNG GALAXY S II (02) PDF MANUAL

The earSmart voice processor in your phone captures your voice and all the sounds around you.

Working like the human ear, it processes and distinguishes these sounds, isolates your voice conversation, and removes background noise – from both ends of a call.

It also automatically equalizes and adjusts voice volume so you can hear and talk naturally, even in the noisiest places.

With earSmart technology, you can talk where you want, and have clear conversations for mobile calls, video chats, even speakerphone calls, without worrying about surrounding noise.

1. Remove the back cover by inserting a fingernail into the slot on the bottom side of your phone.

2. Lift the cover up and away from the phone.

Carefully slide the SIM card into the SIM card socket (as shown) until the card locks into place.

Make sure that the card’s gold contacts face into the phone and that the upper-left angled corner of the card is positioned as shown.

Important! The plug-in SIM card information and its contacts can be easily damaged by scratching or bending, so be careful when handling, inserting, or removing the card. Keep all SIM cards out of reach of small children.

Note: If the card is not inserted correctly, the phone will not detect the SIM card. Re-orient the card back into the slot if the SIM is not detected.

1. Remove the battery. Use your thumbnail or a sharp object to lift the battery up and then away from the device.

2. Push the microSD card into the slot until it clicks. Make sure the microSD’s gold contact pins face downward and the card is securely inserted.

Note: Your phone has been tested to support up to a 32GB memory card.

1. Remove the battery.

2. Push on the memory card until it clicks and is released.

3. Grasp the memory card and remove it from the phone.

1. Insert the battery into the opening on the back of the phone, making sure the connectors align.

2. Gently press down to secure the battery.

1. Place the battery cover onto the back of the phone and press down.

2. Press along the edge of the back cover until you have a secure seal.

Note: Make sure the battery is properly installed before switching on the phone.

Important! Verify that the handset battery is installed prior to connection. If the battery is not properly installed and the wall charger is connected, the handset may power off and on continuously, preventing proper operation.

Note: You must fully charge the battery before using your phone for the first time. A discharged battery recharges fully in approximately 4 hours.

1. Plug the flat end of the Travel Charger into the Power/Accessory Interface connector and the other end into a standard AC wall outlet.

2. When charging is finished, remove the flat end from the interface connector jack on the phone.

Note: Failure to unplug the wall charger before you remove the battery, can cause damage to the phone.

Warning! If your handset has a touch screen display, please note that a touch screen responds best to a light touch from the pad of your finger. Using excessive force or a metallic object when pressing on the touch screen may damage the tempered glass surface.

When the battery is weak and only a few minutes of talk time remain, the battery icon blinks and the device sounds a warning tone at regular intervals. In this condition, your phone conserves its remaining battery power, not by turning off the backlight, but by entering the dimming mode. For a quick check of your battery level, glance at the battery charge indicator located in the upper-right corner of your device’s display. Solid color indicates a full charge.

When the battery level becomes too low, the phone automatically turns off.

To switch the phone on:

1. Press and hold the Power key (on the upper right side of the phone) until the phone switches on.

2. Sweep your finger across the screen to unlock the phone.

To switch the phone off:

1. Press and hold the Power key until the Device options screen displays.

2. Tap Power off to switch off the phone.

3. At the Power off prompt, tap OK.

1. Press the Power key to lock the touch screen.

2. Press the Power key again to display the main screen then sweep your finger across the glass to unlock the touch screen.

When you first turn on your phone, you will need to set up a few things.

1. The Welcome screen displays. The default language for your phone is English. If you would like to select another language, tap English and select one of the listed languages.

2. Tap Start to begin. The Make it Google screen is displayed.

3. If you already have a Google account, tap Sign in, otherwise, tap Get an account and follow the on-screen instructions to create a Google account. You can also tap Not now if you want to create an account later.

4. At the Use Google location screen, a blue checkmark appears next to the text that explains that you allow Google’s location service to collect anonymous location data from your phone. If you disagree, tap the checkmark to remove it.

5. A blue checkmark also appears next to the text that explains that you allow your location to be used for Google search results and other Google services. If you disagree, tap the checkmark to remove it. Tap Next.

6. In the provided fields, enter your First and Last name so that your phone can personalize some applications. Tap Next.

7. Read the information on the Google services screen, then tap Next.

8. At the Setup complete screen, tap Finish to complete your setup. The main Home screen is displayed.

Note: In order to utilize your device to the fullest extent, you will need to create a Google™ Account when you first use your device. With a Google Account, you will have access to more Google applications and applications will always be in sync between your phone and computer.

If you did not create a new account during the setup procedure when you first turned your phone on, follow these steps:

1. From the Home screen, tap the Applications icon, then tap Gmail. The Add a Google Account screen displays.

2. If you already have a Google account, tap Existing to sign in and add the account to your phone. Or tap New to create a new Google account.

3. Follow the on-screen instructions to add a Google Account.

Note: If you already have a Google account, you only need to sign in.

A Google account password is required for Google applications. If you misplace or forget your Google Account password, follow these instructions to retrieve it:

1. From your computer, use an Internet browser to navigate to http://google.com/accounts.

2. Once the URL loads, click on the Can’t access your account? link.

3. From the Please select your issue section, select I forgot my password.

4. Select Reset your password here, then follow the password recovery procedure.

1. From the Home screen, tap the Phone icon, then tap the Voicemail icon.

2. Follow the tutorial to create a password, record a greeting, and record your name.

Note: These steps may be different depending on your network.

1. From the Home screen, tap the Phone icon, then tap the Voicemail icon. You may be prompted to enter a password.

2. When connected, follow the voice prompts from the voice mail center.

1. Dial your wireless phone number.

2. When you hear your voicemail greeting, press the asterisk key on the phone you are using.

3. Enter your passcode.

Android System Recovery is used for Google updates but the average user will never need to perform a system recovery.

To enter the Android System Recovery mode, follow these steps:

1. With the phone turned off, press the Power key and Volume Up/Down keys at the same time until the phone switches on.

2. Once the Samsung Galaxy S II logo appears, release the Power key while continuing to press the Volume Up/Down keys.

3. Continue to press the Volume Up/Down keys for at least 8 seconds, until Recovery mode is launched and the Android System Recovery screen is displayed.

4. Release the Volume Up/Down keys.

5. The following options are available:

• reboot system now: this option turns on your phone.

• apply update from external storage: this option allows you to apply updates from your memory card to your phone.

• wipe data/factory reset: deletes all data from the phone except pictures and videos.

• wipe cache partition: allows you to delete all cache data such as log files.

• apply update from cache: allows you to update your phone’s software once it has been placed in the cache after you have performed a Software update from the Settings menu.

• test redbend fota[FS]: for development purposes only.

6. Use the Volume Up/Down keys to scroll up or down, then use the Power key to make a selection.

Note: If you entered this menu by mistake, use the Volume Up/Down keys to select reboot system now, then press the Power key. Your phone will then continue to boot up.

You can boot your phone into Safe Mode if you wish to troubleshoot whether or not added applications are causing problems with the device. Safe mode will only load basic system software.

1. Make sure your phone is turned off.

2. Press and hold the power key to boot up your device.

3. After the animation starts to display, continually tap the Menu key until the backlight turns on behind the four bottom keys.

4. Press and hold the Menu key.

When the Home screen is displayed, Safe mode is displayed in the lower left corner of the screen.

If your device has fatal errors, hangs up, or freezes, you may need to reset the device to regain functionality.

If your device is frozen and unresponsive, press and hold the Power/Lock Key for 8 to 10 seconds.

For more information, refer to “Android System Recovery”.

The Front facing camera allows you to take pictures of yourself when you set the camera shooting mode to Self shot.

The Proximity and Light sensors use the ambient light level to adjust keypad access. If the light path is blocked, for example, when holding the phone close to your ear, the touch screen will turn off. They are also used to automatically adjust the brightness of the display.

The Menu key allows you to access sub-menus with additional options for different features and applications such as Home screen, Phone, Contacts, Messaging, and Web.

The Home key allows you to return to the main Home screen from any Home screen or menu. Press and hold to display Task Manager.

The Back key allows you to step backwards when navigating a menu or web page.

The Search key allows you to access the Google Search feature where you can search for items on the internet.

The Volume keys allow you to adjust the ringer volume while in standby mode or adjust the voice volume during a call. When receiving an incoming call, briefly press down either volume key to mute the ring tone. They also adjust text size when reading a message or using the browser in the Applications folder.

The Power/Accessory Interface connector allows you to connect a Travel Charger or other optional accessories such as a USB/data cable or a hands-free headset for convenient, hands-free conversations.

The Power/Lock key lets you power your phone on and off. It also allows you to lock or unlock the touch screen.

The 3.5mm Headset jack allows you to plug in headphones.

This icon displays your current signal strength. The greater the number of bars, the stronger the signal.

This icon indicates that Airplane Mode is active. You cannot send or receive any calls or access online information.

This icon displays when there is no SIM card in the phone.

This icon displays when there is no network available.

This icon displays when there is a system error or alert.

This icon displays when a call is in progress and you exit the call screen.

This icon displays when a call is on hold and you exit the call screen.

This icon displays when the speakerphone is on and you exit the call screen.

This icon displays when a call has been missed.

This icon displays when a call has been muted.

This icon displays when Call forwarding is set to Always forward.

This icon displays when your phone is set to automatically reject calls from your Reject list or all calls.

This icon displays your battery charge level. The icon shown is fully charged.

This icon displays when your battery is charging. It also displays battery charge level.

This icon shows your current battery only has three percent power remaining and will immediately shutdown.

This icon displays when your connection to an EDGE network is active.

This icon displays when your phone is communicating with the EDGE network.

This icon displays when your connection to a UMTS, HSDPA, HSPA, HSPA+, or 4G network is active.

This icon displays when your phone is communicating with the UMTS, HSDPA, HSPA, HSPA+, or 4G network.

This icon displays when your phone is downloading a file. It will blink green when it is installing.

This icon displays when a Play Store download has completed.

This icon displays when updates are available for download.

This icon displays when the phone is connected to a computer via a supported USB cable connection.

This icon displays when the phone is tethered via a supported USB cable connection.

This icon displays when a new text or multimedia message is received.

This icon displays when a new voice mail is received.

This icon displays when Email is received.

This icon displays when the time and date for a Calendar Event has arrived.

This icon displays when you set an alarm to ring at a specified time.

This icon displays when Silent mode is set to Mute.

This icon displays when Silent mode is set to Vibrate.

This icon displays when Bluetooth is activated.

This icon displays when a Bluetooth device has been paired with the phone.

This icon displays when Bluetooth is on but is not connected to a Bluetooth device.

This icon displays when Wi-Fi is connected, active, and communicating with a Wireless Access Point (WAP).

This icon displays when Wi-Fi is active but there is a communication issue with the target Wireless Access Point (WAP).

This icon displays when Wi-Fi Direct is active and your phone is connected to another device. It also displays when your phone has been configured as a portable Wi-Fi hotspot.

This icon displays when your phone is connected to a PC using Kies air.

This icon displays when your phone is connected to a Digital Living Network Alliance (DLNA) certified device using the AllShare application.

This icon displays when GPS is active and acquiring a signal.

This icon displays when Power saving mode is enabled.

This icon displays when TTY device has been inserted.

1. From the Home screen, tap the Applications icon, then tap one of the application icons.

2. Follow the on-screen instructions.

3. To return to the main Home screen, tap the Home key.

AllShare allows your phone to stream photos, music and videos from its memory to other Digital Living Network Alliance (DLNA) certified devices. Your phone can also play digital content streamed from other DLNA certified devices.

This application allows you to download books, magazines, and newspapers to read on your phone.

AT&T Code Scanner allows you to scan 2D (QR and datamatrix codes) and 1D (UPC and EAN) barcodes found in magazines, stores, and online.

AT&T FamilyMap provides peace of mind by being able to conveniently locate a family member from your wireless phone or PC and know that your family’s location information is secure and private.

AT&T Navigator provides you with access to real-time GPS-driven applications. These programs not only allow you to achieve turn-by-turn navigation, but also access local searches based on a variety of category parameters.

With AT&T Smart Wi-Fi, you can maximize your battery performance, maximize your data, simplify access to AT&T Hot Spots and Wi-Fi networks, automate your Wi-Fi connections, and track your data use.

Using this feature you can use the phone as a calculator. The calculator provides the basic arithmetic functions; addition, subtraction, multiplication, and division. You can also use this as a scientific calculator.

With the Calendar feature, you can consult the calendar by day, week, or month, create events, and set an alarm to act as a reminder, if necessary.

You can use your 8.0 megapixel camera to produce photos and videos.

The Clock application allows you to access alarms, view the World Clock, set a stopwatch, and use a timer.

You can manage your daily contacts by storing their name and number in your Address Book. Address Book entries can be sorted by name, entry, or group. You can also synchronize your phone Address Book with AT&T Address Book, the network backup service.

The Downloads application allows you to manage all of your downloads from Play Store and the Browser.

Email enables you to review and create email using various email services. You can also receive text message alerts when you receive an important email. This icon only displays in the Applications menu when Email has been removed as a Home screen shortcut.

Facebook enables you to go directly to your Facebook account without accessing it through your web browser.

The Gallery is where you view photos and play back videos. For photos, you can also perform basic editing tasks, view a slideshow, set photos as wallpaper or contact image, and share as a picture message.

Gmail is a web-based email service. Gmail is configured when you first set up your phone. Depending on your synchronization settings, Gmail can automatically synchronize with your Gmail account on the web.

Google+ makes messaging and sharing with your friends a lot easier. You can set up Circles of friends, visit the Stream to get updates from your Circles, use Messenger for fast messaging with everyone in your Circles, or use Instant Upload to automatically upload videos and photos to your own private album on Google+.

Kies air allows you to sync your Windows PC wirelessly with your phone provided they are both on the same Wi-Fi network. You can view call logs, videos, photos, bookmarks, IMs, and even send SMS messages from your home computer.

With Google Latitude, you can see the location of all of your friends on a map or on a list. You can also share or hide your location.

Live TV is a subscription service that allows you to watch your favorite TV shows using your handset.

Depending on your location, you can view basic, custom, and satellite maps and local business information, including locations, contact information, and driving directions. You can also post public messages about a location and track your friends.

Samsung Media Hub is your one stop for the hottest movie and TV content. You can rent or purchase your favorite content and watch from the convenience of anywhere.

This feature allows you to create a memo.

Messenger allows you to bring groups of friends together into a simple group conversation. When you get a new conversation in Messenger, Google+ sends an update to your phone.

The Mini Diary allows you to keep a diary of your daily activities and also attach pictures. You can publish your diary entries to Facebook and MySpace.

The Movies application allows you to rent movies to watch on your phone.

Music Player allows you to play music files that you have stored on your phone and memory card. You can also create playlists.

My Files allows you to manage your sounds, images, videos, bluetooth files, Android files, and other memory card data in one convenient location.

MyAT&T allows you to manage your own AT&T account. You can review and pay your bill, check minutes and data usage, upgrade to a new device, or change your rate plan.

Navigation is an internet-connected GPS navigation system with voice guidance. You can type or speak your destination.

News & Weather displays current news and weather for your location.

The Photo Editor application provides basic editing functions for pictures that you take on your phone. Along with basic image tuning like brightness, contrast, and color it also provides a wide variety of effects used for editing the picture.

Places is an application that uses Google Maps and your location to help you find Restaurants, Cafes, Bars, Attractions, and more. You can also add your own locations.

With Google Play Books, you can find more than 3 million free e-books and hundreds of thousands more to buy in the eBookstore.

With Google Play Movies, you can rent thousands of different movies. You can watch instantly, or download your movie for offline viewing at a later time.

With the Music application, while online, you can play music that you have added to your music file as well as any music you copied from your PC. While offline, you can listen to music you have copied from your PC.

The Play Store provides access to downloadable applications and games to install on your phone.

Qik Lite allows you to record and share live video from your device with your friends, family and your favorite social networks.

The Quickoffice application allows you to create and save Microsoft Word and Excel documents. You can also view existing Powerpoint presentations and PDFs.

The Search application is the same on-screen Internet search engine that is on the Google Search Bar on your main Home screen.

This icon navigates to the sound and phone settings for your phone. It includes such settings as: display, security, memory, and any extra settings associated with your phone.

With Social Hub, you can now easily and intuitively satisfy all of your relevant communication needs from one integrated user experience. E-mails, instant messaging, social network contents, and calendar contents from all major service providers are available.

Google Talk is a free Windows and web-based application for instant messaging offered by Google. Conversation logs are automatically saved to a Chats area in your Gmail account. This allows you to search a chat log and store them in your Gmail accounts.

The Task application allows you to keep track of tasks that you have. You can also sync them with different accounts.

The Task manager application provides information about the processes and programs running on your phone, as well as the memory status. It can also be used to terminate processes and applications.

Video Maker allows you to custom-make your own videos. You can add themes, music, pictures, and other videos to your video.

The Video Player application plays video files stored on your microSD card.

With the Voice command application you can use your voice to perform operations that you would normally have to do by hand such as dialing a phone number, texting a message, playing music, etc.

The Voice Recorder allows you to record an audio file up to one minute long and then immediately send it as a message.

With the Voice talk application you can use your voice to perform operations that you would normally have to do by hand such as dialing a phone number, texting a message, playing music, etc.

You can play Words Free, everyone’s favorite crossword game, with all of your friends that have an Android device.

YouTube is a video sharing website on which users can upload and share videos, and view them in MPEG-4 format.

The YP (Yellowpages) application provides quick and ready access to businesses, map locations, and storage of your favorite searches. This application allows you to tap into local businesses, locations, and events, connecting you to your search in real-time.

The Google Search Bar provides you an on-screen Internet search engine powered by Google™.

1. From the main home screen, sweep your screen to the left twice and then tap the Google Search bar.

2. Use the on-screen keypad to enter the item you want to search for, then tap the search icon.

3. Tap the microphone icon to use Google Voice Search.

Press the Menu key to display a context-sensitive menu of options for the current screen or feature.

Press the Home key to display the main Home screen. Press and hold to display recently used apps and access the Task manager.

Press the Back key to return to the previous screen, option or step.

Press the Search key to launch Quick Search, to search the web and your phone.

Lightly touch items to select or launch them. For example:

• Tap the on screen keyboard to enter characters or text.

• Tap a menu item to select it.

• Tap an application’s icon to launch the application.

Lightly touch the screen twice. For example:

• Double Tap the screen when using Voice talk to automatically prepare your device for voice commands.

Activate on-screen items by a touch and hold gesture. For example:

• Touch and hold a widget on the home screen to move it.

• Touch and hold on a field to display a pop-up menu of options.

To sweep, lightly drag your finger vertically or horizontally across the screen. Use sweep when:

• Unlocking the screen

• Scrolling through the Home screen or a menu

To pan, touch and hold a selected icon, then move the device to the left or right to reposition it to another page. You must first activate Motion on your device. Use panning to:

• Move icons on your Home screens or Application Menus to another page.

To activate the tilt feature, press and hold two points on the screen then tilt the device back and forth to reduce or enlarge the screen. Use tilt to:

• Reduce or enlarge the screen in the Gallery or Browser.

Turn your phone over so that the screen faces downward. For example:

• Mute incoming calls and playing sounds by turning your phone over.

1. Press the lock button located on the upper right side of your phone.

2. The lock screen will display with “Swipe screen to unlock” displayed at the bottom of the screen.

3. Swipe the touch screen in any direction.

4. The Home screen will display.

Your phone initially has seven home screens. If you like, you can place different applications on each of the home screens.

From the main Home screen, sweep the screen with your finger in either direction. The main Home Screen is located in the middle with three Home screens on each side.

Your phone initially has four Application Menus available. Follow these steps to navigate through the Application Menus:

1. At the Home screen, tap the Applications icon. The first Application Menu will be displayed.

2. Sweep the screen left or right to access the other three menus.

3. Tap one of the application icons.

Note: As you add applications, the number of Application menus that you have available will increase.

Sub-menus are available when you are at any Home screen or have selected a feature or application such as Phone, Contacts, Messaging, or Web.

To access a sub-menu:

1. Press the Menu key. A sub-menu will appear at the bottom of the phone screen.

2. Tap an option.

1. Press and hold the Home key from any screen to open the recently-used applications window.

2. Tap an icon to open the selected application.

or

Tap Task manager to go to the Task manager.

1. Press the Home key to activate the main Home screen.

2. Navigate to the desired Home Page.

3. Tap the Applications icon to display your current applications.

4. Scroll through the list and locate your desired application.

5. Touch and hold the application icon. This creates an immediate shortcut of the selected icon and closes the Applications tab.

6. While still holding the on-screen icon, position it on the current page. Once complete, release the screen to lock the new shortcut into its new position on the current screen.

Note: To move a shortcut from one screen to another, it must first be deleted from its current screen. Navigate to the new screen, then add the shortcut.

1. Press the Home key to activate the main Home screen.

2. Navigate to the desired Home Page.

3. Touch and hold on an empty area of the Home screen.

4. From the Add to Home window tap Shortcuts.

5. Tap a shortcut from the available list.

6. Follow the on-screen instructions to add the new shortcut to your current Home screen.

1. Press the Home key to activate the main Home screen.

2. Touch and hold the desired shortcut. This unlocks it from its location on the current screen.

3. Drag the icon over the Remove icon (trash can) and release it. As you place the shortcut into the Trash, both items turn red.

Note: This action does not delete the shortcut, it just removes it from the current screen.

You can change any of your primary shortcuts with the exception of the Applications and Home shortcuts.

1. Press the Home key to activate the main Home screen.

2. Tap the Applications icon to display your current applications.

3. Press the Menu key and tap View type.

4. Tap Customizable grid. A green circle will appear next to the option.

5. Press the Menu key and tap Edit. The Edit applications screen is displayed.

6. Tap OK.

7. Scroll through the list and locate your desired application.

8. Touch and hold the on-screen icon, then drag it over the primary shortcut that you want to replace. The new primary shortcut then appears at the bottom of the screen. The old primary shortcut will return to the menu.

9. Press the Menu key and tap Save.

10. Press the Home key to return to the main Home screen. The new primary shortcut will now appear on all Home screens.

Note: When a primary shortcut is removed, it will then appear as an option in the Application menu.

1. Press the Home key to activate the main Home screen.

2. Navigate to the desired Home Page.

3. Touch and hold on an empty area of the screen.

4. From the Add to Home window tap Widgets.

5. Tap an available Widget to place it on your current screen.

1. Touch and hold a Widget until you can move it around on the screen.

2. Drag the Widget over the Remove icon (trash can) and release it. As you place the Widget into the Trash, both items turn red.

Note: This action does not actually delete the Widget, it just removes it from the current Home screen. To move a Widget from one screen to another, it must first be deleted from its current screen. Activate the new screen, then add the Widget.

1. Press the Home key to activate the main Home screen.

2. Tap the Applications icon to display your current applications.

3. Press the Menu key and tap View type.

4. Tap Customizable grid. A green circle will appear next to the option.

5. Press the Menu key and tap Edit.

6. Scroll through the list and locate the icon you wish to move.

7. Touch and drag the icon to the position that you want. To move to a different page, drag the icon to the edge of the page until the page scrolls to the desired page.

8. Press the Menu key and tap Save.

9. Press the Home key to return to the main Home screen.

Folders are located on any of the seven available Home screens and can contain both files (such as data and images) and Contact information or entries.

To create a folder on-screen follow these steps:

1. Press the Home key to activate the main Home screen.

2. Navigate to the desired Home Page.

3. Touch and hold on an empty area of the screen.

4. From the Add to Home window tap Folders.

5. Tap an available folder type to place it on your current screen. Choices include New folder, All contacts, Contacts with phone numbers, Received list from Bluetooth, and Starred contacts.

Note: Starred contacts are those Contact entries tagged as very important.

You can change the Wallpaper (background) of your home screens by following these steps:

1. Press the Home key to activate the main Home screen.

2. Touch and hold on an empty area of the screen.

3. From the Add to Home window tap Wallpapers.

4. Tap one of the following options:

• Gallery: select a wallpaper from photographs you have taken with your camera.

• Live wallpapers: select an animated wallpaper.

• Wallpaper gallery: select from many still-life wallpapers.

5. Select a wallpaper and tap Set wallpaper or Save.

Your phone comes with seven Home screens. You can arrange the screens in any order that you want.

To move a Home screen, follow these steps:

1. Press the Home key to activate the main Home screen.

2. Press the Menu key and tap Edit.

3. Touch and hold the Home screen you want to move.

4. Drag it to the location that you would like to place it. When you move a Home screen, the other Home screens will be re-ordered automatically.

5. Press the Home key to return to the main Home screen.

To delete a Home screen, follow these steps:

1. Press the Home key to activate the main Home screen.

2. Press the Menu key and tap Edit.

3. Touch and hold the Home screen you want to delete.

4. Drag it to the trash can (Remove icon) located at the bottom of the screen.

5. If there are items on the Home screen that you want to delete, the “Home screen has items. Delete?” prompt is displayed.

6. Tap Yes to remove the page, otherwise, tap No.

7. Press the Home key to return to the main Home screen.

To add a Home screen, follow these steps:

1. Press the Home key to activate the main Home screen.

2. Press the Menu key and tap Edit.

3. Touch and hold the Home screen that contains the plus icon and drag it to the new location.

4. Press the Home key to return to the main Home screen. You can now add items to your new Home screen.

Note: The plus icon will only be displayed if a Home screen has previously been deleted.

The Notification Bar includes a pull-down list to show information about processes that are running, recent notifications, and alerts. To display the Status indicator:

• On the Home screen, touch and hold the Notification Bar until the pull-down displays, then drag down vertically.

1. From the Home screen, touch and hold the Notification Bar until the pull-down displays, then drag down vertically.

2. Tap the Clear button.

The notifications are cleared and the panel closes.

To store photos, music, videos, and other applications, you must mount (install) the SD card prior to use. Mounting the SD card establishes a USB connection with your computer.

1. Insert the SD card into the external, SD card slot.

2. Your SD card is scanned to see the available information on it.

Important! If access to the external SD card is not available, download and install the USB drivers. You must disable USB storage to mount the SD card.

Unmounting the SD card prevents corruption and damage to the SD card while removing it from the slot.

1. From the Home screen, tap the Applications icon, then tap Settings, then Storage.

2. Scroll to the bottom of the display and tap Unmount SD card.

3. Tap OK.

To view the memory allocation for your external SD card:

1. From the Home screen, tap the Applications icon, then tap Settings, then Storage.

2. The available memory for Device, USB, and SD card displays under the Total space and Available headings.

1. Ensure the SD card is mounted.

2. From the Home screen, tap the Applications icon, then tap Settings, then Storage.

3. Tap Format SD card.

4. At the Format SD card confirmation prompt, tap Format SD card.

Warning! Performing this step erases all data stored on the SD card.

5. Tap Delete all to format or press the Back key to cancel.

Tap the Applications icon → Settings → About phone → Status. Your phone number is displayed in the My phone number field.

1. From the Home screen, tap the Phone icon and use the on-screen keypad to enter the number you wish to dial.

2. Tap the green Call icon to make the call.

1. From the Home screen, tap the Phone icon, then touch and hold 0 +. The + character appears.

2. Use the on-screen keypad to enter the country code, area code, and phone number.

• If you make a mistake, tap the delete icon until the desired numbers have been deleted.

3. Tap the green Call icon to make the call.

To manually call a number with pause(s) without storing it in your Contacts list:

1. From the Home screen, tap the Phone icon and use the on-screen keypad to enter the phone number.

2. Press the Menu key to display the dialer sub-menu.

3. Tap Add 3-sec pause to add a three-second pause, and use the keypad to enter the additional numbers.

Tip: You can create pauses longer than three seconds by entering multiple 3 sec pauses.

Select Add wait to add a wait. A wait will pause the calling sequence until you enter a number or press a key.

Tap the green call icon to make the call.

After entering a number using the keypad:

• If you make a mistake, tap the backspace icon to erase a single character.

• Press and hold the backspace icon to erase the entire string of numbers.

Tap the red “End call” key.

1. From the Home screen, tap the green call icon.

2. Tap Logs (Logs icon). A list of recent calls is displayed.

3. Tap the desired Contact to enter the Details page, then tap the green call icon to make a call.

You can assign a short cut number to a phone number in your Contacts List for speed dialing.

1. Tap the Contacts icon to display your Contacts List.

2. Press the menu icon to display the Contacts List sub-menu.

3. Tap Speed dial setting.

4. The Speed dial setting screen displays showing the numbers 1 through 9. The number 1 is reserved for Voicemail.

5. Tap an unused number and the Contacts screen displays.

6. Select a contact to assign to the number. The selected contact number will display in the speed dial number box.

7. To remove a speed dial number or change the order, press the menu icon to display the Speed Dial sub-menu.

8. Tap Change order or Delete.

Tap the Keypad icon, and from the Dialer, touch and hold the speed dial number.

When a call is received the phone rings and displays the caller’s phone number, or name if stored in the Address Book.

1. At the incoming call screen:

• Touch and drag the green call icon in any direction to answer the call.

• Touch and drag the red end call icon in any direction to reject the call and send it to your voicemail.

• Touch and drag the Reject call with message tab upward and tap a predefined text message to send to the caller (e.g., I am driving, I am at the cinema, I am in class, I am in a meeting, Sorry, I am busy. Call back later.).

• or – Tap the + Create new message icon to compose a new message.

2. To end an answered call, tap the red “End call” icon.

From the Home screen and Application menus, you have the option to access the Dialer and initiate a call by tapping the green phone icon, then Keypad.

From the Dialer and the Contacts screen, the following tabs are located at the top of your screen:

• Keypad: dials the current number entered using the on-screen keypad.

• Logs: displays a list of all dialed, received, and missed calls.

• Favorites: displays your contacts that you have marked as Favorites. Also displays frequently called numbers.

After you begin to enter numbers, the Add to Contacts option appears so you can save the Contact if needed.

All calls made, received, and missed are listed in the Call log. Types of calls are identified by the following icons:

• Incoming Calls: Green arrow pointing down-left icon.

• Outgoing Calls: Orange arrow pointing up-right icon.

• Missed Calls: Red broken arrow with a phone receiver icon.

• Rejected Calls: Blue circle with a slash icon.

• Auto Rejected Calls: Blue circle with an ‘A’ and a slash icon.

The number of calls you have missed is displayed on the Home screen.

1. Touch the missed call icon with the number of missed calls on it and move it in any direction.

1. From the Home screen, tap the green phone icon, then tap Logs (Logs icon). A list of recent calls is displayed. If the number or caller is listed in your Address Book, the associated name is displayed.

2. Tap the desired missed call. The call detail page is displayed.

3. Tap the green phone icon.

1. From the Home screen, tap the green phone icon, then tap Logs (Logs icon). A list of recent calls is displayed.

2. Tap the call you want to save to your Address Book.

3. The call detail page is displayed. Tap Create contact to add the call to your Address Book. The Create contact screen is displayed.

– or – If you want to replace the number for an existing contact, tap Update existing.

4. Enter information into the various fields using the keypad.

5. Tap the Phone icon at the top of the display to select where you want the contact saved. It is saved to the Phone by default.

6. Tap Phone, SIM, or account name.

7. Tap the checkmark icon when you are finished to save the contact.

1. From the Home screen, tap the green phone icon, then tap Logs (Logs icon). A list of recent calls is displayed.

2. Tap the call you want to send a message to. The call detail page is displayed.

3. Tap the message icon.

4. At the Message screen, tap the empty text field and use the on-screen keypad to type in a message.

5. When you are done with your message, tap Send.

1. From the Home screen, tap the green phone icon, then tap Logs (Logs icon). A list of recent calls is displayed.

2. Touch and hold the call you want to delete from the Call log.

3. Tap Delete. The call is deleted from the Call log.

1. From the Home screen, tap the green phone icon, then tap Logs (Logs icon). A list of recent calls is displayed.

2. Touch and hold the call you want to add to the Reject List.

3. Tap Add to reject list. Future calls from this number will be rejected and sent to your voicemail.

1. From the Home screen, tap the green phone icon.

2. Tap Logs (Logs icon).

3. Press the menu icon to display the Call log sub-menu.

4. Tap Call duration.

5. The following times are displayed for Voice and Data:

• Last call: shows the length of time for the last call.

• Dialed calls: shows the total length of time for all calls made.

• Received calls: shows the total length of time for all calls received.

• All calls: shows the total length of time for all calls made and received.

6. You may reset these times to zero by pressing the menu icon then tapping Reset.

During a call, to adjust the earpiece volume, use the Volume keys on the left side of the phone.

• Press the Up volume key to increase the volume level and press the Down volume key to decrease the volume level.

From the Home screen, you can also adjust the ringer volume using these same keys.

During an active call there are several functions available by tapping a corresponding on-screen button.

• Hold: place the current active call on hold.

• Add call: displays the dialer so you can call another person.

• Keypad: displays the on-screen keypad, where you can enter numbers using DTMF (Dual Tone Multi-Frequency).

• End call: terminates the call.

• Speaker: routes the phone’s audio through either the speaker or through the earpiece.

– Tap Speaker to route the audio through the speaker. (You can adjust the speaker volume using the volume keys.) A green line will appear under the Speaker button.

– Tap Speaker again to use the phone’s earpiece. The green line will turn grey when Speaker is not activated.

• Mute/Unmute: turn the onboard microphone either on or off.

– Tap Mute during a call to mute the microphone. A green line will appear under the Mute button.

– Tap Mute again to unmute the microphone. The green line will turn grey when Mute is not activated.

• Headset: connects to a Bluetooth headset.

– Tap Headset during a call to activate a Bluetooth headset. A green line will appear under the Headset button.

– Tap Headset again to de-activate the Bluetooth headset. The green line will turn grey when the Headset is not activated.

• Press the menu icon for more options:

– Contacts: allows you to go to your Contact list.

– Memo: allows you to jot down a memo during a call.

• Noise Suppression On/Off: allows you to turn on the Noise Suppression feature when you are in a noisy area. Turn it Off when not needed to conserve battery power.

1. While on a call, tap Hold (pause icon). This action places the current caller on hold (which is displayed on-screen as a greyed-out box).

2. You can later reactivate this call by tapping Unhold.

This service requires network support.

1. Tap Hold (pause icon).

2. Tap Add call (Add call icon) to display the dialer.

3. Enter the new number and tap the green phone icon. Once connected, the active call will appear in a large box in the middle of your screen and the call on hold will appear in a small box in the upper right corner of your screen.

1. Tap Swap. The current call (caller #2) is placed on hold and the previous call on hold (caller #1) is then reactivated so that you can continue conversing with that person. The active call will appear in a green box.

2. Tap the red end call icon to end the currently active call.

Alternatively, the Swap function places the current call on hold and then activates the previous call. The active call will appear in a green box. Tap Swap again to switch back.

1. Tap Swap until the call you want to end appears in a green box.

2. Tap the red end call icon to end the specific call.

3. Tap the red end call icon to end the remaining call.

1. Tap the green phone icon and slide to the right to answer another call.

2. Tap “Put [Number] on hold” to put the first call on hold.

3. To switch between the two calls, tap Swap.

1. Tap the red end call icon to disconnect the active call.

2. The call on hold will now become the active call. Tap the red end call icon to end this call.

The 3-Way or Multi-Party feature allows you to answer a series of incoming calls and place them on hold. If this service is supported by the network, all calls can be joined together. You are notified of an incoming call by a call waiting tone.

To join calls into a multi-party call:

1. While on an active call, tap the green phone icon and slide to the right to answer the next incoming call.

2. Tap “Put [Number] on hold” to put the first call on hold.

3. Join the first two callers into a single multi-party call by tapping Merge.

4. To temporarily leave the conference call, tap Hold. To rejoin the conference call tap Unhold.

5. Tap the red end call icon to end the conference call.

Note: The Merge option combines all of the calls you have established with your phone (both active and on hold). Swap places the current call on hold and then activates the previous call.

1. Tap the Speaker icon. The Speaker button now appears with a green line underneath and the speakerphone is activated.

2. Use the Volume keys (located on the left side of your phone) to adjust the volume.

3. To deactivate the speakerphone, tap the Speaker icon again.

1. Tap the Mute icon. The Mute button now appears with a green line underneath and Mute is activated.

2. Tap the Mute icon again to deactivate the Mute function and reactivate the microphone.

1. Tap the Headset icon.

2. The phone will scan for your Bluetooth headset. When found, connect to the headset. The Headset button now appears with a green line underneath and the Bluetooth headset is activated.

3. Tap the Headset icon again to deactivate the Bluetooth headset and reactivate the phone speaker.

1. During the active call, press the menu icon then tap Contacts.

2. Tap the Address Book entry.

The Call Waiting feature allows you to answer an incoming call while you have a call in progress, if this service is supported by the network, and you must first activate the Call Waiting feature:

Tap the Applications icon, then go to Settings, then Call, then Additional settings, then select Call waiting. You are notified of an incoming call by a call waiting tone.

There are three text input methods available:

• Android keyboard (default): an on-screen QWERTY keypad that can be used in both portrait and landscape orientation.

• Google voice typing: uses Google voice recognition to convert your spoken words into on-screen text.

• Samsung Keypad: Samsung’s on-screen QWERTY keypad that can be used in both portrait and landscape orientation.

• Swype: a new way to enter text on touch screens. Instead of tapping each key, use your finger to trace over each letter of a word.

The available Text Input modes are: Sym and Abc.

• The ?123 icon (Symbol/Numeric Mode): activates the number, symbol, and emoticon keys.

• The ABC icon (ABC Mode): activates the default alphabet keys. Can also be set to Abc or abc by using the shift (up arrow icon) key.

Note: When in Abc mode, the Sym button will appear. When in Sym mode, the Abc/ABC/abc button will appear.

1. If desired, rotate your phone counterclockwise to a Landscape orientation.

2. When you tap the “Tap to enter message” field, the QWERTY keyboard displays.

3. Tap the desired alphabetic characters.

4. The screen initially opens in ABC mode (all caps). After typing the first letter, the shift key (full up arrow icon) will change to an outline up arrow icon, and following letters will be lowercase.

5. Tap the outline up arrow icon to input another upper-case letter or tap the outline up arrow icon twice to switch to ABC mode (all caps). The shift key will change to a full up arrow icon in ABC mode. All following letters will be uppercase until you tap the shift key again.

1. Rotate your phone counterclockwise to a Landscape orientation.

2. Tap the ?123 icon at the bottom of the screen. The Symbol/Numeric keyboard will display.

3. Tap the desired number, symbol, or emoticon characters.

4. Tap the 1/2 icon button to access additional symbols.

5. Tap ABC to return to Abc mode.

By using the Show Correction Suggestions option, you can have next-letter prediction and regional error correction.

1. In the text portion of the message screen, begin typing a word. A list of word options is displayed. Tap one of the words to replace the word that has already been typed or scroll the line of words to the left for more word choices.

2. Continue typing your message. Tap Send to send the message or press the menu icon for more options.

1. From a screen where you can enter text, touch and drag the notification bar icon down from the Notifications area then tap Select input method.

2. Tap the Samsung keypad radio button. It will turn green. The Samsung keypad is displayed.

Swype is a text input method that allows you to enter a word by sliding your finger or stylus from letter to letter, lifting your finger between words. For example, to enter the word “This”: Put your finger down on the “T”, and without lifting, glide it to the “h”, then to the “i” then over to the “s”.

The Samsung keypad is the default text input method, so to use Swype, you must first change the default keyboard setting.

1. From a screen where you can enter text, touch and drag the notification bar icon down from the Notifications area then tap Select input method.

2. Tap the Swype radio button. It will turn green. The Swype keyboard is displayed.

• Create a squiggle (like an S shape) to create a double letter (such as pp in apple).

• Touch and hold a key to view the punctuation menu then make a selection.

• Move your finger or stylus over the apostrophe to enter contractions.

• Double-tap on the word you want to change to correct a misspelled word, then tap the delete key to erase one character. Touch and hold the delete key to erase an entire word.

1. From a screen where you can enter text, tap the microphone icon.

2. The virtual keyboard is then removed and all subsequent input is done via the microphone as text to speech.

3. Select a language by tapping at the bottom of the Listening area.

• Tap Add more languages to assign a new language via the Google voice typing menu.

• Removing the check mark from the Automatic field allows you to select additional languages.

This feature uses Google voice recognition to convert your spoken words into on-screen text.

1. From a screen where you can enter text, tap the microphone icon.

2. At the Listening prompt, speak into the device’s microphone and watch your text being entered on-screen.

3. If the text is incorrect, tap the DELETE box.

4. Once you have completed entering your message, tap Done.

Note: This feature works best when you break your message down into smaller segments.

When you access the AT&T Address Book, the network backup service, contacts are automatically synchronized between your phone and online address book.

1. From the Home screen, tap the Applications icon, then Contacts (Contacts icon). Your Address Book is displayed.

2. If you have not synchronized your phone with your online AT&T Address Book recently, the AT&T Address Book screen is displayed. Tap Yes if you want to synchronize your Address Book.

3. Follow the on-screen instructions.

Use the following procedure to add a new contact to your Address Book.

Saving a Number from the Home screen:

1. From the Home screen, tap the Applications icon, then Contacts (Contacts icon), then the Plus icon.

2. Tap Phone (Phone icon) at the top of the display to select where you want the contact saved. It is saved to the Phone by default.

3. Tap Phone, SIM, or account name.

4. Tap the image icon and assign a picture to the new entry by choosing one of three options:

• Take photo: use the camera to take a new picture and assign it to this entry, then tap Save.

• Select picture from Gallery: retrieve a previously stored image from your Pictures folder and assign it to this entry. Tap an image to assign the image to the contact, then tap Save.

• Remove photo: although not an option with a new entry, deletes any previously assigned image on an existing contact.

5. Tap the Name field and use the on-screen keypad to enter the full name. Or, tap the dropdown arrow icon next to the Name field to display additional name fields.

6. Tap the Phone number field. The numerical keypad is displayed. The Mobile button initially displays next to the Phone number field. If you want to add a phone number that is not a mobile number, tap the Mobile button and select from Mobile, Home, Work, Work fax, Home Fax, Pager, Other, Custom (add your own label), or Callback.

7. Enter the phone number. Tap the plus icon to add another Phone number field or tap the minus icon to delete a field.

8. Tap the Address field. The keypad is displayed. The Home button initially displays next to the Address field. If you want to add an address that is not a Home address, tap the Home button and select from Home, Work, Other, or Custom (add your own label).

9. Enter the address. Tap the plus icon to add another address field or tap the minus icon to delete a field.

10. Tap any of the following fields that you want to add to your new contact:

• Events: tap the plus icon to add a Birthday, Anniversary, Other event, or Custom event.

• Groups: assign the contact to Co-workers, Family, or Friends group.

• Ringtone: adds a field used to assign a message tone that will sound when messages are received from this contact. Choose between Default, Ringtones, or Go to My files.

• Add another field: tap this button to add another field such as Phonetic name, Organization, Email, IM, Notes, Nickname, Website, or Relationship.

11. Tap the checkmark icon to save the new contact.

When you call automated systems, you are often required to enter a password or account number. You can store these numbers in your Contacts with pauses and waits.

1. From the Home screen, tap the Applications icon, then Contacts (Contacts icon), and then tap the name or number to open the Contact.

2. Tap the pencil icon to edit.

3. Tap the phone number field.

4. Tap the screen at the position where the pause or wait needs to be added.

5. Tap the *# icon.

6. Tap Pause to add a two-second pause or tap Wait to add a wait, and use the keypad to enter the additional numbers. A pause will be displayed as a comma (,) and a wait will be displayed as a semi-colon (;).

7. Tap the checkmark icon to save your changes, or tap the X icon to discard.

When editing an existing contact, you can tap a field and change or delete the information, or you can add additional fields to the contact’s list of information.

1. From the Home screen, tap the Applications icon, then Contacts (Contacts icon). Press and hold the Contact that you want to edit.

2. Tap Edit.

3. Tap any of the fields to add, change, or delete information.

4. Tap the checkmark icon to save the edited information.

1. From the Home screen, tap the Applications icon, then Contacts (Contacts icon).

2. Within the Contacts list (sorted alphabetically), tap a letter on the right side of the display to quickly jump to the contacts beginning with that letter.

3. Tap the contact you wish to call or message.

4. Once the contact is open, tap the phone icon to make a phone call or tap the message icon to send a message.

From the Contact list, sweep right over a listing to make a call. Sweep left over a listing to send a message.

1. From the Home screen, tap the Applications icon, then Contacts (Contacts icon).

2. Tap a contact name (the name you want to join to another entry). Typically, this is the same contact with a different name or account information.

3. Press the menu icon, then Join contact. The contact list is displayed.

4. Tap the second contact entry (the entry in which to join). The second contact is now joined with the first and the account information is merged into one screen.

Note: The information is still maintained in both entries, but displays in one record for easier viewing when you join the contacts.

5. Tap the Connections bar to view the contact information you joined. The contacts and information displays with an icon next to the contact name to indicate what type of account information is contained in the entry.

1. From the Home screen, tap the Applications icon, then Contacts (Contacts icon).

2. Tap a contact name (the account name from which you want to unlink an entry). Note: typically this is the same contact with a different name or account information.

3. Tap the Connections bar.

4. Tap the minus sign icon next to entry in which you want to unjoin. The contact is now separated and no longer displays in the merged record screen.

When you use messaging type applications, the application needs to know which information is primary (default) in a contact entry list.

1. From the Home screen, tap the Applications icon, then Contacts (Contacts icon).

2. Tap a Contact name.

3. Press the menu icon, then Mark as default. The Mark as default screen displays radio buttons next to the contact names or phone numbers of all the linked contacts. The radio button next to the default contact will be green.

4. To change the default contact, tap the radio button next to another entry that you want to be the default. The radio button will turn green, then tap the checkmark icon to save your changes.

From the Accounts menu you decide if you want applications to synchronize, send, and receive data at any given time, or if you want the applications to synchronize automatically.

1. From the Home screen, tap the Applications icon, then Contacts (Contacts icon).

2. Press the menu icon then tap Accounts.

3. Tap Sync all to synchronize all accounts. Or, tap the sync icon next to the account you want to sync, then tap Sync Now. The accounts are synchronized.

1. From the Home screen, tap the Applications icon, then Contacts (Contacts icon), then press the menu icon.

2. The following options are displayed:

• Delete: allows you to delete 1 or more of your contacts.

• SIM Management: allows you to copy contacts from your phone to your SIM card or from your SIM card to your phone. You can also delete contacts from your SIM.

• Import/Export: allows you to move contacts to or from your memory card. You can also send a namecard via Bluetooth, Email, Gmail, Messaging, or Wi-Fi Direct.

• Merge with Google: allows you to merge your contacts together with your Google account contacts.

• Accounts: allows you to add and manage mobile accounts on Facebook, Google, and Microsoft Exchange ActiveSync. Tap Add account and then follow the on-screen instructions.

• Speed dial setting: allows you to set up speed-dialing.

• Send email: allows you to send an email using your Google account.

• Send message: allows you to send a text or picture message.

• Contacts to display: You can choose to display all of your contacts or only display contacts on your Phone, SIM, or contacts stored to other accounts. You can also tap Customize to change other options on how your contacts are displayed.

• Settings: allows you to choose set the following options:

– Only contacts with phones: allows you to only display contacts that have phone numbers.

– Sort list by: allows you to sort by First name or Last name.

– Display contacts by: allows you to sort by First name first or Last name first.

– Service numbers: allows you to display or edit your service numbers.

– Send contact: allows you to send contacts via Bluetooth in the form of namecards.

• AT&T Address Book: allows you to access the AT&T Address Book so you can sync your contacts.

1. From the Home screen, tap the Applications icon, then Contacts (Contacts icon).

2. Tap a contact and at the contact’s display screen, press the menu icon.

3. The following options are displayed:

• History: allows you to view the phone and message history for the contact.

• Delete: allows you to delete the contact from your Address Book.

• Join contact: allows you to join contacts with other contacts (only displays when contact is saved to SIM).

• Mark as default: when you have multiple contacts linked together, you can mark one of them as default (only displays when contact is saved to the phone).

• Share namecard via: allows you to send the contact’s information via Bluetooth, Email, Gmail, Messaging, or Wi-Fi Direct.

• Add to/Remove from reject list: allows you to add or remove the contact from your reject list. If they call while being on the reject list, the call will be sent directly to voice mail.

• Print namecard: allows you to print the contact’s namecard to a Samsung printer using Wi-Fi.

1. From the Home screen, tap the Applications icon, then Contacts (Contacts icon).

2. Press and hold the contact name that you want to add to a group.

3. Tap Add to group. A list of groups is displayed.

4. Tap a group entry that you want to add the contact to. A checkmark will appear.

5. Tap the checkmark icon to save. The contact is added to the group.

1. From the Home screen, tap the Applications icon, then Contacts (Contacts icon), then tap the Groups tab.

2. Tap a group entry.

3. Press the menu icon, then Remove member.

4. Tap all of the contacts you want to remove from this group. A green checkmark will appear next to their name.

5. Tap the checkmark icon to remove. The contacts are now removed from the group.

1. From the Home screen, tap the Applications icon, then Contacts (Contacts icon), then tap the Groups tab, then press the menu icon, then tap New.

2. Tap the Group name field and use the on-screen keypad to enter a new group name.

3. Tap Group ringtone to choose an audio file for assignment to this new group. Choose from Default, Ringtones, or Go to My files.

4. Tap Add member to add contacts to the new group.

5. Tap the checkmark icon to save the new Group category.

To edit a Group entry, there must be at least one member as part of the selected group.

1. From the Home screen, tap the Applications icon, then Contacts (Contacts icon), then tap the Groups tab.

2. Tap a group entry.

3. Press the menu icon, then Edit.

4. Make modifications to the Group name or Group ringtone fields.

5. Tap Add member to add more contacts to this group.

6. Tap the checkmark icon to save your changes.

From the Home screen, tap the Applications icon, then Contacts (Contacts icon), then tap the Favorites tab.

1. From the Home screen, tap the Applications icon, then Contacts (Contacts icon).

2. Within the Contacts list, touch and hold a contact that you want to add to your favorites list.

3. Tap Add to favorites on the displayed list.

4. A gold star will appear next to the contact in the Address Book.

1. From the Home screen, tap the Applications icon, then Contacts (Contacts icon).

2. Within the Contacts list, touch and hold a contact that you want to remove from your favorites list. Contacts in your Favorites list will have a gold star.

3. Tap Remove from favorites on the displayed list.

4. The gold star will no longer appear next to the contact in the Address Book.

1. From the Home screen, tap the Applications icon, then Contacts (Contacts icon), then press the menu icon, then select SIM Management.

2. Tap Copy Contacts to SIM. The phone then displays a list of your current phone contacts.

3. Tap the contacts to place a checkmark adjacent to those entries you wish to have copied to the SIM card. Repeat this step for all individual entries you wish copied to the SIM or tap Select all to place a checkmark alongside all entries.

4. Tap the checkmark icon to copy.

5. At the Copy to SIM display, tap OK.

6. At the Copy Successful display, tap OK. The selected numbers are copied to the SIM card.

1. From the Home screen, tap the Applications icon, then Contacts (Contacts icon), then press the menu icon, then select SIM Management.

2. Tap Copy Contacts from SIM.

3. At the Create contact under account prompt, tap Phone, Microsoft Exchange ActiveSync or an account name. The phone then displays a list of your current contacts stored on your SIM card.

4. Tap the contacts to place a checkmark adjacent to those entries you wish to have copied to your phone. Repeat this step for all individual entries you wish copied to your phone or tap Select all to place a checkmark alongside all entries.

5. Tap the checkmark icon to copy.

6. At the Copy Successful display, tap OK. The selected numbers are copied to your phone.

1. From the Home screen, tap Contacts (Contacts icon), then press the menu icon, then select SIM Management.

2. Tap Delete Contacts from SIM. The phone then displays a list of your current phone contacts.

3. Tap the contacts to place a checkmark adjacent to those entries you wish to have deleted from the SIM card. Repeat this step for all individual entries you wish deleted from the SIM or tap Select all to place a checkmark alongside all entries.

4. Tap the checkmark icon to delete.

5. At the Delete contacts from SIM display, tap OK.

6. At the Delete Successful display, tap OK. The selected numbers are deleted from the SIM card.

1. From the Home screen, tap the Applications icon, then Contacts (Contacts icon).

2. Within the Contacts list, touch and hold a contact that you want to delete.

3. Tap Delete on the displayed list.

4. At the Delete prompt, tap OK to delete the contact or Cancel to exit.

You can view the list of Service Dialing Numbers (SDN) assigned by your service provider. These numbers may include emergency numbers, customer service numbers, and directory inquiries.

1. From the Home screen, tap the Applications icon, then Contacts (Contacts icon), then press the menu icon, then select Settings.

2. Tap Service numbers.

3. Scroll through the available numbers (if available).

4. Tap a number to call.

Note: This menu is available only when your SIM card supports Service Dialing Numbers.

1. Tap the Applications icon, then Settings, then Security, then Unknown sources to create a checkmark and allow the Samsung app to run.

2. At the informational prompt, tap OK.

3. Press the Home icon, then tap the Applications icon, then Media Hub (Media Hub icon).

4. If you do not have the Samsung Account App yet, an Attention prompt will display. Tap OK.

5. Tap Install. You will only need to do this once.

6. Tap Done.

7. Read the Terms and Conditions screen and tap the “I agree to the Terms and Conditions” checkbox.

8. Tap Accept to continue or Decline to exit.

9. At the Media Hub screen, “What’s New” is displayed with recently added media that you can rent or purchase.

10. Tap the menu icon for the following options:

• Movies: displays movies that are available for rent or purchase. Scroll through the top navigation bar and select a movie category. The movies of that type will be displayed below.

• TV Shows: displays TV shows that are available for purchase. Scroll through the top navigation bar and select a TV category. The TV shows of that type will be displayed below.

• My Media: allows you to view all of the media that you have purchased or rented. Tap a media entry to view it.

11. Scroll through the media listings and tap on an item you would like to purchase or rent.

12. Follow the on-screen instructions to create a Samsung account and make a purchase.

13. The media will be stored in the My Media folder.

1. Tap the Applications icon, then Music Player (Music Player icon).

2. Tap a library category at the top of the screen (All, Playlists, Albums, Artists, or Folders) to view the available music files.

3. Scroll through the list of songs and tap an entry to begin playback.

4. The following Music Player controls are available:

• Pause icon: Pause the song.

• Play icon: Start the song after being paused.

• Rewind icon (K): Press and hold to rewind the song. Tap to go to previous song.

• Fast-forward icon (K): Press and hold to fast-forward the song. Tap to go to next song.

• Volume icon: Volume control.

• Repeat one icon: repeats the currently playing song.

• Repeat all icon (A): Repeat all: replays the current list when the list ends.

• Play all icon (A): Play All: plays the current song list once.

• Shuffle on icon: Shuffle On: the current list of songs are randomly shuffled for playback.

• Shuffle off icon: Shuffle Off: songs play in order and are not shuffled.

• 5.1Ch icon: Allows you to listen to music using 5.1 Virtual Surround Sound.

• List icon: Displays your list of songs.

1. While in the Music Player, press the menu icon.

2. The following options are available:

• Add to quick list: adds the current music file to the Quick list.

• Via Bluetooth: scans for devices and pairs with a Bluetooth headset.

• Share music via: allows you to share your music by using AllShare, Bluetooth, Email, Gmail, Messaging, or Wi-Fi Direct.

• Set as: allows you to set a music file to Phone ringtone, Caller ringtone, or Alarm tone.

• Add to playlist: allows you to add the current music file to a selected playlist.

• Settings: allows you to change your music player settings.

• Details: allows you to view media info such as Title, Biography, Discography, and other information.

The Music Player Settings menu allows you to set preferences for the music player such as whether you want the music to play in the background, sound effects, and how the music menu displays.

1. From the Home screen, tap the Applications icon, then Music Player (Music Player icon).

2. Press the menu icon, then Settings.

3. Select one of the following settings:

• Equalizer: set a type of equalization. Selections are: Auto, Normal, Pop, Rock, Jazz, Dance, Classic, Live, or Custom.

• Sound effects: configure the music effects. Selections are: Normal, Wide, Concert Hall, Music clarity, Bass enhancement, or Externalization.

• Music menu: this menu allows you to select which categories you want to display. Choices are: Albums, Artists, Genres, Folders, Composers, Years, Most played, Recently played, or Recently added. Tap each item that you want to display in the Music menu.

• Visualization: when activated the music player displays an animated display.

• Lyrics: when activated, the lyrics of the song are displayed if available.

• Music auto off: when activated, music will automatically turn off after a set interval.

1. From the Home screen, tap the Applications icon, then Music Player (Music Player icon).

2. Tap the Playlists tab.

3. Press the menu icon, then Create.

4. Type a name for this playlist in the field and tap Save.

1. From the Home screen, tap the Applications icon, then Music Player (Music Player icon).

2. Tap the Playlists tab.

3. Tap the playlist name in which to add music.

4. Tap the Add music icon.

5. Tap a music file, or tap Select all to add all the music tracks to this playlist then tap Add.

1. From the Home screen, tap the Applications icon, then Music Player (Music Player icon).

2. Tap the Playlists tab.

3. Tap the playlist name in which to delete music.

4. Press the menu icon, then Remove.

5. Tap the checkbox to the right of each track you want to remove from this playlist, or tap Select all to remove all the music tracks from this playlist, then tap Remove.

1. From the Home screen, tap the Applications icon, then Music Player (Music Player icon).

2. Tap Playlists.

3. Press the menu icon, then Edit title.

4. Tap a playlist name to edit.

5. Tap the Name field for the selected playlist, enter a new name for the playlist then tap Save.

With Google Play Music, you can play music that you have added to your music file as well as any music you copied from your PC. While offline, you can listen to music you have copied from your PC.

1. From the Home screen, tap the Applications icon, then Play Music (Play Music icon). All music on your device and external SD card is displayed including Music folders that may contain multiple songs.

2. Tap a song to start playback.

3. From the main Play Music screen, you can tap any of the following tabs for a more detailed listing of songs: Recent, Artists, Albums, Songs, Playlists, and Genres.

4. Tap the menu icon for the following options:

• Shuffle all: allows you to play all of your music in a shuffled order.

• Settings: allows you to view Open source licenses and the music version for the Play Music application.

• Help: allows you to view a help file for the application.

AT&T U-verse Live TV is a subscription service that allows you to watch your favorite TV shows using your handset.

1. Sign on to your Google account if you have not already done so.

2. Tap the Applications icon, then Live TV (Live TV icon).

Note: The first time you use Live TV, you will need to download the application from the Play Store.

3. Read the Terms and Conditions and tap Accept to continue or Exit to exit.

4. Tap Purchase Options and follow the on-screen instructions to start your subscription.

5. When the Live TV main page displays, follow the on-screen instructions to watch TV.

Qik Lite is a mobile video sharing service.

1. You will need to sign onto a Wi-Fi network first in order to use Qik Lite.

2. Tap the Applications icon, then Qik Lite (Qik Lite icon).

3. The first time you access Qik Lite, tap Get started! to create your Qik account and follow the on-screen prompts. The instructions will help you download the app from the Play Store. Otherwise, tap “Already a Qik user?”.

4. Tap the username and password fields and enter your information, then tap Login.

Note: The first time you use Qik Lite, you will need to download the application from the Play Store.

5. Select one of the following options and follow the on-screen instructions:

• Video Chat: allows you to participate in two-way video chats.

• Record & Share: allows you to record videos and have them instantly uploaded for sharing or safe-keeping.

• Video Mail: allows you to send videos by email.

• Video Gallery: allows you to see all of your videos.

To use Video Chat, you and the person you want to Video Chat with must have a Qik Video account and be signed in.

1. Tap the Applications icon, then Qik Lite (Qik Lite icon).

2. Sign on to your Qik Video account and tap Video Chat.

3. At the Video Chat screen, tap Dialpad, then enter the phone number or the Qik user name of the person you want to Video Chat with.

4. Tap Start Video Chat.

Note: If the contact is not a Qik user, you have the option to send them a video mail. Tap Yes to continue, then tap Record new or Browse Gallery.

5. To end the Video Chat, tap End Chat.

The Video Player application plays video files stored on your microSD card.

1. Tap the Applications icon, then Video Player (Video Player icon).

2. All videos that you have on your memory card will be displayed. Tap the video that you want to play.

3. The video will begin to play.

4. The following video controls are available:

• Pause icon: Pause the video.

• Play icon: Start the video after being paused.

• Rewind icon (K): Press and hold to rewind the video. Tap to go to previous video.

• Fast-forward icon: Press and hold to fast-forward the video. Tap to go to next video.

• Volume icon: Volume control.

• Original size icon: Original size view. The video will be played in its original size.

• Full-screen ratio icon: Full-screen in ratio view. The video is enlarged as much as possible without becoming distorted.

• Full-screen view icon: Full-screen view. The entire screen is used, which may cause some minor distortion.

• 5.1Ch icon: Allows you to listen to music using 5.1 Virtual Surround Sound.

• AllShare icon: Allows you to share the video using the AllShare app.

Note: The screen view icons are a three-way toggle. The icon that is displayed, is the mode that will appear after the icon is tapped.

With Google Play Movies, you can rent thousands of different movies. You can watch instantly, or download your movie for offline viewing at a later time.

1. From the Home screen, tap the Applications icon, then Play Movies (Play Movies icon).

2. Sign on to your Google account if you have not already done so.

3. Following the on-screen instructions for renting and viewing movies.

Video Maker allows you to custom-make your own videos. You can add themes, music, pictures, and other videos to your video.

1. From the Home screen, tap the Applications icon, then Video Maker (Video Maker icon).

2. Follow the on-screen instructions.

The Gallery is where you view photos and play back videos.

1. Tap the Applications icon, then Gallery (Gallery icon). All of the Albums that hold your pictures and videos will be displayed with folder name and number of files.

2. Tap an Album and thumbnails of the contents will be displayed.

Viewing Pictures:

1. Tap a thumbnail to view the picture.

Note: If no control icons are displayed on the screen in addition to the picture, tap anywhere on the screen to display them.

2. The following options are available:

• Send via: allows you to send the picture via Bluetooth, Email, Gmail, Messaging, or Wi-Fi Direct.

• Delete: allows you to delete the picture. Tap Confirm deletions and the picture will be deleted.

3. Press the menu icon for additional options:

• Share via: allows you to share the picture via AllShare, Facebook, Google+, Picasa, or Social Hub.

• Set as: allows you to set the picture as a Contact icon, Home screen wallpaper, or Lock screen wallpaper.

• More: displays additional options for editing and printing.

Note: If no control icons are displayed on the screen in addition to the video, tap anywhere on the screen to display them.

1. Touch and hold a video to select it. A checkmark will appear on the thumbnail.

2. The following options are available:

• Send via: allows you to share the video via Bluetooth, Email, Gmail, Messaging, or Wi-Fi Direct.

• Delete: allows you to delete the video. Tap Confirm deletions and the video will be deleted.

• More: displays the following additional options:

– Share via: allows you to share a video via Facebook or YouTube.

– Play via: allows you to play a video via AllShare.

– Rename: allows you to rename a video.

– Details: provides details about the video such as Title, Type, Date taken, name of the Album it is in, Location, Latitude and Longitude (GPS coordinates), Size, Resolution, Duration, and File location.

3. Tap a thumbnail to play the video.

1. From the main Home screen, tap the Camera icon to activate the camera mode. (Note: If the Camera icon is deleted from the Home screen, or if you want to access the camera from another Home screen, you must tap Applications, then Camera).

2. Using the phone’s main display screen as a viewfinder, adjust the image by aiming the camera at the subject.

3. Before you take a picture, use the Up and Down Volume keys to zoom in or out. You can magnify the picture up to x4 (400 percent).

4. If desired, before taking the photo, you can tap on-screen icons to access various camera options and settings.

5. You can also tap the screen to move the focus to the area you touch.

6. Press the Camera key (camera shutter icon) until the shutter sounds. The picture is automatically stored within your designated storage location. If no microSD is installed, all pictures are stored on the Phone.

7. While viewing a picture, after you have taken it, tap the zoom in icon to zoom in or the zoom out icon to zoom out. Alternatively, tap each side of the picture and swipe outward or inward to zoom in or out. You can magnify the picture up to x4.

After viewing a photo you’ve taken, press the back icon to return to the viewfinder.

Options are represented by icons across both sides of the screen.

• Camera / Camcorder Mode icon: Allows you to switch between taking photos and recording videos. Once you change the mode, the corresponding indicator appears at the top left of the display. Slide the button up for Camera, or down for Camcorder.

• Self portrait icon: Allows you to set the front camera so you can take pictures of yourself or video chat.

• Flash icon: Allows you to set the flash options to Off, On, or Auto flash.

• Settings icon: Accesses further camera settings including:

– Edit shortcuts: allows you to set shortcut icons for the settings that you use the most.

– Self-portrait: (Same as above, allows setting front camera for self-pictures or video chat).

– Flash: (Same as above, set flash options to Off, On, or Auto flash).

– Shooting mode: allows you to set the shooting mode. Options are:

• Single shot: takes a single photo and view it before returning to the shooting mode.

• Smile shot: the camera focuses on the face of your subject. Once the camera detects the person’s smile, it takes the picture.

• Beauty: adjusts the contrast to smooth facial features.

• Panorama: takes a landscape photo by taking an initial photo and then adding additional images to itself. The guide box lets you view the area where the second part of the panoramic picture should fall within.

• Action shot: detects action and creates a panorama of the moving object.

• Cartoon: gives your photo a cartoon look.

– Scene mode: allows you to set the Scene to help take the best pictures possible. Options include None, Portrait, Landscape, Night, Sports, Party/Indoor, Beach/Snow, Sunset, Dawn, Fall Color, Firework, Text, Candlelight, and Backlight.

– Exposure value: allows you to adjust the brightness level by moving the slider.

– Focus mode: allows you to set this option to Auto focus, Macro, or Face detection.

– Timer: allows you to set a timer for how long to wait before taking a picture. Options include: Off, 2 sec, 5 sec, and 10 sec.

– Effects: allows you to change the color tone or apply special effects to the photo. Options include: None, Negative, Grayscale, and Sepia.

– Resolution: allows you to set the image size (e.g., 8M, W6.5M, etc.).

– White balance: allows you to set this option to Auto, Daylight, Cloudy, Incandescent, or Fluorescent.

– ISO: set light sensitivity (Auto, 100, 200, 400, 800).

– Metering: set light source measurement (Centre-weighted, Spot, Matrix).

– Outdoor visibility: improve pictures taken outdoors.

– Anti-Shake: reduces image blur.

– Auto contrast: provides clear image in backlight.

– Blink detection: warns if human eyes are blinking.

– Guidelines: turn guidelines On or Off.

– Image quality: set to Superfine, Fine, or Normal.

– GPS tag: turn GPS On or Off (Geotagging). Requires enabling GPS satellites in Location services.

– Shutter sound: turn shutter sound On or Off.

– Storage: configure default storage (Phone or Memory card).

– Reset: reset all camera settings to default.

After you take a photo or shoot a video, you can access various options from the Pictures and Videos Image Viewer. The last picture/video you took will be displayed as a thumbnail in the Image viewer icon on the camera screen.

Available options from the Image Viewer screen (showing the taken photo/video):

• Share: offers several ways to share your picture or video. Options include: AllShare, Bluetooth, Email, Facebook, Gmail, Google+, Messaging, Photo Editor, Picasa, Social Hub, and Wi-Fi Direct.

• Delete: allows you to delete the current picture/video. Tap OK to delete or Cancel.

• More: allows you to do the following:

– Set as (for pictures): allows you to assign the current image as either your current Wallpaper or as a Contact icon to display for a specific entry within your Address Book.

– Rename: allows you to rename a picture/video.

• Return to previous page (camera icon): takes you back to the previously active camera page where you can take another photo or shoot a new video.

When you take a picture, the file is saved in the Camera folder.

1. From the Home screen, tap the Applications icon, then My Files (My Files icon), then DCIM, then Camera.

2. Tap a photo file to open it in the Image viewer. Sweep the screen to the left to see the next picture or to the right to see the previous picture.

Before you select a picture in the Camera folder (accessed via My Files), press the menu icon to see the following options:

• Share: lets you share selected pictures with AllShare, Bluetooth, Email, Facebook, Gmail, Google+, Messaging, Photo Editor, Picasa, Social Hub, Wi-Fi Direct, or YouTube.

• Create folder: create a new sub-folder in the current folder. Can be on either the Phone or Memory Card.

• Delete: allows you to delete selected pictures. Tap the checkmark, to turn it green, next to any file or folder you want to delete, then tap Delete.

• View by: allows you to view the contents of the current folder as a list, as a list and details, or as thumbnails.

• Sort by: allows you to view the contents of the current folder sorted by Time, Type, Name, or Size.

• Move: allows you to move one or more pictures to a different folder.

• Copy: allows you to copy one or more pictures to a different folder.

• Rename: allows you to rename one or more picture files.

• Settings: lets you set several general folder options:

– Show hidden files: causes files and folders that would normally be hidden to be displayed.

– Show file extension: causes file extensions to be displayed. For example, jpg.

– Set Home directory: allows you to choose and set the Home directory.

1. From the Home screen, tap the Applications icon, then My Files (My Files icon), then navigate to DCIM, then Camera, and tap on the desired image.

2. Tap the menu icon, then Set as, then Contact photo.

3. Tap a contact entry.

4. Touch and drag the orange crop box anywhere on the picture.

5. Tap Save.

1. From the Home screen, tap the Applications icon, then My Files (My Files icon), then navigate to DCIM, then Camera, and tap on the desired image.

2. Tap the menu icon, then Set as, then select Home screen wallpaper or Lock screen wallpaper.

3. Touch and drag the orange crop box anywhere on the picture.

4. Tap Save to assign the wallpaper image. Tap Cancel to stop without updating the wallpaper image.

1. From the main Home screen, tap the Camera icon to activate the camera mode.

2. Touch and drag the Camera mode button down to Camcorder Mode.

3. Using the phone’s main display screen as a viewfinder, adjust the image by aiming the camcorder at the subject.

4. Before you take a video, use the Up and Down Volume keys to zoom in or out. You can magnify the picture up to x4 (400 percent).

5. Tap the Video key (record icon) to begin shooting video. The red light will blink while recording.

6. Tap the Video key (record icon) again to stop the recording and save the video file to your Camera folder.

7. Once the file has been saved, tap the image viewer thumbnail, then tap the play icon to play your video for review.

8. Press the back icon to return to the camcorder viewer.

Options are represented by icons across both sides of the screen.

• Camera / Camcorder Mode icon: Allows you to switch between taking photos and recording videos. Slide the button up for Camera, or down for Camcorder.

• Recording mode icon: Allows you to set the recording mode to: Normal (limited by available space), Limit for MMS (limited by MMS size restrictions), and Self recording (activates front-facing camera).

• Flash icon: Allows you to set the flash options to Off or On. When set to On, it stays on continually while taking a video.

• Settings icon: Accesses further camcorder settings including:

– Edit shortcuts: allows you to set shortcut icons for the settings that you use the most.

– Flash: (Same as above).

– Recording mode: (Same as above).

– Exposure value: adjust brightness by moving the slider.

– Timer: set a timer (Off, 2 sec, 5 sec, 10 sec) before recording starts.

– Effects: change color tone or apply special effects (None, Negative, Grayscale, Sepia).

– Resolution: set video size (e.g., 1920×1080, 1280×720, etc.).

– White balance: set to Auto, Daylight, Cloudy, Incandescent, or Fluorescent.

– Outdoor visibility: take better videos outdoors (Off or On).

– Video quality: set to Superfine, Fine, or Normal.

– Guidelines: turn guidelines On or Off.

– Storage: configure default storage (Phone or Memory card).

– Reset: reset all camcorder settings to default.

After you shoot a video, you can access various options from the Image Viewer. The last video you took will be displayed as a thumbnail in the Image viewer icon on the camcorder screen.

The following options are available from the Image Viewer screen (showing the taken video):

• Share: offers several ways to share your video. Options are: AllShare, Bluetooth, Email, Facebook, Gmail, Messaging, Wi-Fi Direct, and YouTube.

• Delete: allows you to delete the current video. Tap OK to delete or Cancel.

• More: allows you to access the following additional options:

– Play: allows you to play the video.

– Rename: allows you to rename the video.

When you shoot a video, the file is saved in the Camera folder.

1. From the Home screen, tap the Applications icon, then My Files (My Files icon), then DCIM, then Camera.

2. Tap a video file to open it in the viewer and initiate playback.

3. To pause the video, tap the Pause icon. To play the video, tap the Play icon.

Before you select a video to play from the Camera folder (accessed via My Files), press the menu icon to see the following options:

• Share: lets you share selected videos with AllShare, Bluetooth, Email, Facebook, Gmail, Google+, Messaging, Photo Editor, Picasa, Social Hub, Wi-Fi Direct, or YouTube.

• Create folder: create a new sub-folder in the current folder. Can be on either the Phone or Memory Card.

• Delete: allows you to delete selected videos. Tap the checkmark, to turn it green, next to any file or folder you want to delete, then tap Delete.

• View by: allows you to view the contents of the current folder as a list, as a list and details, or as thumbnails.

• Sort by: allows you to view the contents of the current folder sorted by Time, Type, Name, or Size.

• Move: allows you to move one or more videos to a different folder.

• Copy: allows you to copy one or more videos to a different folder.

• Rename: allows you to rename one or more video files.

• Settings: lets you set several general folder options (Show hidden files, Show file extension, Set Home directory).

While you are playing a video (accessed from My Files), press the menu icon to display the following options:

• Share via: lets you share the video with AllShare, Bluetooth, Facebook, Wi-Fi Direct, Messaging, YouTube, Email, or Gmail.

• Video brightness: allows you to set the brightness for a video that is playing. You can also select Automatic brightness.

• Via Bluetooth: scans for a Bluetooth device on which to play the video.

• Subtitles: allows you to view subtitles if they are present in the video.

• Color tone: allows you to set the color tone of a video to Normal, Warm, or Cold.

• Outdoor visibility: allows you to turn view videos outside. Select On or Off.

• Details: displays file information such as file name, format, resolution, file size, date & time, and forwarding capability.

Screen view options (toggle icons):

• AllShare icon: allows you to share the video using the AllShare app.

• 5.1 Ch. icon: allows you to listen to music using 5.1 Virtual Surround Sound.

• Original Size icon: the video will be played in its original size.

• Full-Screen in Ratio View icon: the video is enlarged as much as possible without becoming distorted.

• Full-Screen View icon: the entire screen is used, which may cause some minor distortion.

Playback controls:

• Pause/Resume: tap the Pause icon to pause the video being played. Tap the Play icon to resume playing.

• Previous/Next: tap the Previous icon (K) to jump to the previously played video or tap the Next icon to jump to the next video file in the Camera folder.

• Exit: to return to the videos list, tap the back/exit icon in the top right corner of the screen.

The Photo Editor application provides basic editing functions for pictures that you take on your phone.

1. From the Home screen, tap the Applications icon, then Photo Editor (Photo Editor icon).

2. Tap Select picture to edit a picture in your Gallery. Or, tap Capture picture to take a picture with the camera.

3. Tap the picture and it is loaded into the Photo Editor.

4. Use the following Photo Editor controls to edit your picture:

• Selection Size icon: allows you to set the size of the selection tool to Small, Medium, or Large.

• Selection tool icon: use the selection tool to mark an area for cropping, rotating, etc.

• Crop icon: allows you to crop (cut-out) an area of a photo.

• Rotate icon: allows you to rotate a photo in all 4 directions. You can also mirror image a photo.

• Move icon: use the move feature to move a photo around when you are zoomed in and the entire photo is not showing on the screen.

• Tools icon: allows you to Copy and Paste to different images. You can also use Warping and Fill.

• Effects icon: allows you to add various effects to your photo.

• Color icon: allows you to adjust the Saturation, Contrast, Brightness of a photo. You can also make it Grey-scale.

• Next icon (>): move to next photo project.

• Previous icon (<): move to previous photo project.

5. Press the menu icon to access the following options:

• New: starts a new Photo Editor project. Be sure and save the photo you are working on before starting a new project.

• Save: saves your photo to your gallery.

• Share: allows you to share your photo via AllShare, Bluetooth, Email, Facebook, Gmail, Google+, Messaging, Picasa, Social Hub, or Wi-Fi Direct.

When creating a message, adding an image, a sound file, or a video clip to a text message changes the message from a text message to a multimedia message.

1. From the main Home screen, tap Messaging then tap New message.

Note: The main Home screen initially contains the Messaging icon. If you delete it, or if you want to access Messaging from another Home screen, you must tap Applications then Messaging.

2. Tap on the Enter recipient field to manually enter a recipient or tap the contacts icon to select a recipient from your Contacts.

3. If adding a recipient from your Contacts, tap the contact to place a checkmark then tap the checkmark icon. The contact will be placed in the recipient field.

4. Tap the “Tap to enter message” field and use the on-screen keypad to enter a message.

5. Add more recipients by tapping the recipient field if needed. You can enter additional recipients by separating each entry with a semicolon (;).

6. Review your message and tap Send.

For the Group option, if the number of recipients is less than 10, all members in the group will be added. You will need to delete any unnecessary members in the list by selecting the trash can icon and deleting unwanted entries.

If you exit a message before you send it, it will be automatically saved as a draft.

1. From the main Home screen, tap Messaging.

2. Before composing a message, press the menu icon to reveal additional messaging options:

• Search: allows you to search through all of your messages for a certain word or string of words. Enter a search string in the Messaging Search window and tap the search icon.

• Settings: allows you to access Messaging settings.

• Delete threads: allows you to delete any message thread. Select the messages to delete and a green checkmark will appear next to the message. Tap Delete.

While composing a message, press the menu icon to reveal additional messaging options. These can include:

• Insert smiley: allows you to add emoticons, such as a happy face to your message.

• Call: allows you to call the contact. This option only appears if you have entered a phone number for the recipient.

• Add text: allows you to copy text from your Location, Contacts, Memo, Task, or Calendar to add to your message.

• Add to Contacts: allows you to add the recipient to your Contacts list. This option only appears if the recipient is not already in your Contacts list.

• View contact: allows you to see information on the recipient. This option only appears if the recipient is in your Contacts list.

• Add slide: allows you to add a new page to a message.

• Delete message: allows you to delete the message.

To add an attachment to your message, tap the attachment icon and select one of the following options:

• Pictures: allows you to tap an existing image from your Pictures list to add it to your message.

• Take picture: allows you to temporarily exit the message, take a photo with phone’s camera, and then add it to your message by tapping Save.

• Videos: allows you to choose an existing video from the Videos list, then add it to your message.

• Capture video: allows you to temporarily exit the message, record a video clip using the phone’s camera, and then add it to your message by tapping Save.

• Audio: allows you to choose an existing audio file from the Audio list, then add it to your message by tapping the circle to the right of the audio so that it turns green, then tapping OK.

• Record audio: allows you to temporarily exit the message and record an audio clip using the phone’s microphone. It is then automatically attached to the message.

• Location: allows you to attach a thumbnail of a map showing your location.

• Contacts: allows you to tap on an existing Address Book entry, then add it to your message by tapping the checkmark icon.

• Calendar: allows you to tap on an existing Calendar event, then add it to your message by tapping Add.

• Memo: allows you to tap on an existing Memo, then add it to your message by tapping Attach.

• Task: allows you to tap on an existing Task list, then add it to your message by tapping Attach.

You can copy text such as names, phone numbers, and events from your Contacts, Calendar or a Memo.

1. While composing a message, press the menu icon then tap Add text.

2. At the Add text screen, select one of the following:

• Location: allows you to add an address and the link to the location on Google Maps.

• Contacts: allows you to add the name and phone number of any of your contacts to your message.

• Memo: allows you to add an entire memo to your message.

• Task: allows you to add a task to your message.

• Calendar: allows you to add the name, date, and time of a calendar event to your message.

3. Tap the information you want to send. This will place a checkmark next to the item.

4. Tap Add unless you are adding text from Location or Contacts. The text is added to your message.

1. When you receive a new message, the new message icon will appear at the top of your screen.

2. Open the Notification Bar and select the message. For more information, refer to “Notification Bar”.

– or –

From the main Home screen, tap Messaging then tap the new message to view it.

The selected message appears in the display.

To play a multimedia message, tap the play icon. The video is started in the video player.

To scroll through the message (if additional text pages have been added), touch the screen and in a single motion, scroll up or down the page.

To open a threaded message follow these steps:

1. From the main Home screen, tap Messaging. Tap the message thread you want to view.

2. Touch and hold the message thread to display the following options:

• View contact: displays the contact’s information. This option only displays if the sender is in your Contacts list.

• Add to Contacts: displays the Contacts information screen. This option only displays if the sender is not in your Contacts list.

• Delete thread: displays a confirmation dialog box that when pressed, deletes the entire thread.

1. From the main Home screen, tap Messaging.

2. Touch and hold a message, then tap Delete thread.

3. At the Delete prompt, tap OK to delete or Cancel to cancel.

1. From the main Home screen, tap Messaging.

2. Press the menu icon then tap Delete threads.

3. Tap each message you want to delete. A checkmark will appear beside each message you select.

4. Tap Delete.

5. At the Delete prompt, tap OK to delete or Cancel to cancel.

You can search through your messages by using the Message Search feature.

1. From the main Home screen, tap Messaging.

2. Tap the menu icon then tap Search.

3. Use the on-screen keypad to enter a word or phrase to search for, then tap the search icon.

4. All messages that contain the search string you entered are displayed.

To configure the settings for text messages, multimedia messages, Voice mails, and Push messages:

1. From the main Home screen, tap Messaging, then press the menu icon, then tap Settings.

2. The following Messaging settings are available:

• Message font size: allows you to set the size of your message text to Normal, Small, or Tiny.

• Split view: allows you to enable split view when you have the phone in landscape orientation.

• Delete old messages: deletes old messages when the limit is reached, rather than having them overwritten.

• Text message limit: allows you to set a limit on how many text messages can be in one conversation.

• Multimedia message limit: allows you to set a limit on how many multimedia messages can be in one conversation.

• Manage SIM card messages: allows you to manage the messages that you have stored on your SIM card.

• Message center: allows you to enter the number of your Message center where your messages reside while the system is attempting to deliver them.

• Input mode: allows you to set the input mode for your text messages. Choose between GSM alphabet, Unicode, or Automatic.

• Auto-retrieve: allows the message system to retrieve messages automatically.

• Creation mode: allows you to select the creation mode, Free, Restricted, or Warning.

– Restricted: you can only create and submit messages with content belonging to the Core MM Content Domain.

– Warning: the phone will warn you via pop up messages that you are creating a multimedia message which does not fit the Core MM Content Domain.

– Free: you may add any content to the message.

• Push messages: allows you to receive push messages from the network.

• CB activation: allows you to receive Cell Broadcast (CB) messages.

• Channel configuration: allows you to set up the channel that you will receive CB messages on.

• Language: allows you to select all of the languages that you want to receive CB messages in.

• Notifications: allows you to see message notifications on your status bar.

• Select ringtone: allows you to set the ringtone for your message notifications.

• Emergency alerts: allows you to receive wireless emergency alerts from the Commercial Mobile Alerting System (CMAS).

There are three types of Emergency Alerts:

• Alerts issued by the President

• Alerts involving imminent threats to safety of life (Extreme and Severe)

• AMBER Alerts (missing child alert)

Customers may choose not to receive Imminent Threats (Extreme and Severe) and AMBER Alerts. Alerts issued by the President can not be disabled.

To disable Imminent Threats and AMBER Alerts, follow the instructions below:

1. From the main Home screen, tap Messaging.

2. Press the menu icon then tap Settings.

3. Scroll to the bottom and tap Emergency alerts.

4. All alerts are enabled by default (checkmark showing). Tap on an alert option to disable the alert and remove the checkmark.

1. From the Home screen, tap the Email icon. Your accounts screen displays with an Email setup screen displayed.

2. Enter your email address in the Email address field.

3. Enter your password in the Password field.

4. If you want to see your password as it is being typed, tap Show password to create a checkmark.

5. Tap Next.

6. Enter an account name for this email account (optional).

7. Tap Done.

Use the following procedure to configure your phone to synchronize with a corporate email account.

1. From the Home screen, tap the Email icon. Your accounts screen displays with an Email setup screen displayed.

2. Enter your email address in the Email address field.

3. Enter your password in the Password field.

4. If you want to see your password as it is being typed, tap Show password to create a checkmark.

5. Scroll down and tap Manual setup.

6. Tap the Microsoft Exchange ActiveSync field.

7. Enter all the Exchange server information, Domain, Username and Password, then tap Next.

8. At the prompt tap OK. The Account options screen is displayed.

9. Enter the desired information in the different fields, then tap Next.

10. If your corporate email system requires that a Device Administrator is activated, an Activate device administrator screen will display. Tap Activate.

11. Enter an Account name for this account (Optional). Wait for the Inbox to synchronize before use.

12. Tap Done.

13. Press the menu icon, then More, then Account Settings to change the account settings.

To create additional email accounts after setting up your first account, follow these steps:

1. From the Home screen, tap the Email icon. Your Email screen displays showing your emails from the active account.

2. Press the menu icon, then tap Settings, then tap the plus icon, then enter the information required to set up another account.

1. From the Home screen, tap the Email icon. Your Email screen displays showing your emails from the active account.

2. Tap the Inbox button at the top of your screen that displays the optional name you assigned to your first email account (for example, Work, Gmail, etc.). Your Email accounts screen is displayed.

3. Tap the Email account you would like to switch to. You can also select Combined view which will display email messages from all accounts.

4. The new Email account is displayed.

Note: You must sign in to your Gmail account in order to access Gmail.

1. Sign on to your Google account if you are not already signed on.

2. From the Home screen, tap the Applications icon, then tap the Gmail icon.

3. Follow the on-screen instructions. The Inbox loads conversations and email.

1. From the Gmail Inbox, tap the plus icon at the bottom of the screen to create a new message.

2. Enter the recipients Email address in the To field. Separate multiple recipient email addresses with a comma.

3. Tap the menu icon and select Add Cc/Bcc to add a carbon or blind copy.

4. Enter the subject of this message in the Subject field.

5. Tap the Compose email field and begin composing your message.

6. Tap the send icon to send.

1. From the Gmail Inbox, tap a message to view it.

2. The following options are available at the bottom of the screen:

• Archive: archives the selected message.

• Delete: deletes the message.

• Labels: allows you to attach labels to a message.

• Mark Unread: after reading a message, marks as unread.

• Newer: swipe your screen to the right to see newer messages.

• Older: swipe your screen to the left to see older messages.

3. Before selecting a message, press the menu icon to select one of the following additional options:

• Label settings: allows you to set sync and notification settings.

• Settings: displays Email settings that you can modify.

• Help: displays a webpage so you can search the web for help.

• Send feedback: allows you to send feedback or report a problem.

4. After selecting a message, press the menu icon to select one of the following additional options:

• Mark important/not important: allows you to set the importance of a message.

• Mute: allows you to mute the sound in a message if applicable.

• Report spam: allows you to report a message as spam. Tap the UNDO option if you change your mind.

• Settings: displays Email settings that you can modify.

• Help: displays a webpage so you can search the web for help.

• Send feedback: allows you to send feedback or report a problem.

1. Tap the refresh icon at the bottom of the screen to refresh the screen, send and receive new emails, and synchronize your email with the Gmail account.

2. Tap the labels icon at the bottom of the screen to set up and manage Labels for your Gmail messages.

3. Tap the search icon at the bottom of the screen to search through your Gmail messages.

1. From the Home screen, tap the Applications icon, then tap the Talk icon.

2. Press Next to set up a Google account or to Sign in.

3. Tap Create to create a new Google account. – or – Tap Sign in if you have an existing Google account.

4. After entering your user name and password, press the Down Navigation key.

5. Tap Sign in.

6. Begin using Google Talk.

Note: The Network confirms your login and processes. This could take up to 5 minutes to complete.

1. Sign on to your Google account.

2. From the Home screen, tap the Applications icon, then tap the Google+ icon.

3. Select the account you want to use to sign in to Google+. – or – Tap Create a new account to create another account.

4. Follow the on-screen instructions to use Google+.

1. Sign on to your Google account.

2. From the Home screen, tap the Applications icon, then tap the Messenger icon. – or – From the Google+ application, select Messenger.

3. Select the account you want to use to sign in to Google+. – or – Tap Create a new account to create another account.

4. At the Messenger screen, tap the new message icon to start a new message.

5. In the upper text field, enter a name, email address, or circle.

6. In the bottom message field, enter a message then tap the send icon.

7. From the Messenger screen, tap Learn more for more detailed information.

From any Home screen, tap the Applications icon, then tap Settings.

– or –

From any Home screen, press the menu icon, then tap Settings.

The Settings screen displays.

1. From the Home screen, tap the Applications icon, then tap Settings.

2. Tap the ON/OFF slider, located to the right of the Wi-Fi field, to turn Wi-Fi ON.

1. From the Home screen, tap the Applications icon, then tap Settings, then tap Wi-Fi.

2. Tap the menu icon, then tap Advanced.

The following options are available:

• Network notification: alerts you when a new WAP is available.

• Keep Wi-Fi on during sleep: allows you to specify when to disconnect from Wi-Fi.

• Avoid poor connections: will not use a Wi-Fi network with poor internet connections.

• Auto connect: allows you to be automatically connected to an AT&T Wi-Fi Hotspot as soon as your phone detects it.

• Notify AT&T network: automatically notifies you when you are in the range of an AT&T Wi-Fi network.

• Wi-Fi frequency band: allows you to specify the frequency range of operation. Choose from Auto, 5GHz only, or 2.4 GHz only.

Activating Bluetooth:

1. From the Home screen, tap the Applications icon, then tap Settings.

2. Tap the ON/OFF slider, located to the right of the Bluetooth field, to turn Bluetooth ON. The Bluetooth icon will be displayed.

Additional Bluetooth Settings:

When Bluetooth is on, additional settings are available.

1. From the Home screen, tap the Applications icon, then tap Settings, then tap Bluetooth.

2. Tap Scan for devices to scan for nearby discoverable devices. After searching, tap a device to pair with it.

3. Tap the settings icon next to a paired device or the menu icon for general Bluetooth settings to configure:

• Device name: Your device’s default name displays on screen. Tap to change the device name. Available when Bluetooth is turned On.

• Visible time-out: Use this setting to control when to automatically turn off the Discoverable option: 2 minutes, 5 minutes, 1 hour, or Never timeout.

• Show received files: Show the list of files received by using Bluetooth.

From this screen you can view your Mobile data usage and turn your Mobile data capability On or Off.

1. From the Home screen, tap the Applications icon, then tap Settings, then tap Data usage.

2. Tap the ON/OFF slider, located to the right of the Mobile data field, to turn Mobile data usage ON or OFF.

3. Tap Set mobile data limit to create a checkmark and allow a data limit to be set.

4. Touch and drag the red limit bar to the GB limit that you desire.

5. Tap the Data usage cycle drop-down menu and select a date. The data usage displays as a visual (chart) and also displays a list of each application with a breakdown of how many MB were used per application.

Note: Data is measured by your device. Your service provider may account for data usage differently.

6. Press the menu icon to display additional options. Tap to activate:

• Data roaming: enables Data roaming on your device.

• Restrict background data: restricts some apps and services from working unless you are connected to a Wi-Fi network.

• Show Wi-Fi usage: displays a Wi-Fi tab that shows Wi-Fi usage.

From the Home screen, tap the Applications icon, then tap Settings, then tap More…. Options display for Airplane mode, USB Utilities, VPN, Tethering and portable hotspots, Wi-Fi Direct, and Mobile networks.

Airplane mode allows you to use many of your phone’s features, such as Camera, Games, and more, when you are in an airplane or in any other area where making or receiving calls or data is prohibited.

Important! When your phone is in Airplane Mode, it cannot send or receive any calls or access online information or applications.

1. From the Home screen, tap the Applications icon, then tap Settings, then tap More….

2. Tap Airplane mode. A check mark displayed next to the feature indicates Airplane mode is active. The Airplane mode icon is displayed at the top of your screen. Tap it again to deactivate.

This option allows you to copy files between your PC and the memory card in your phone.

1. From the Home screen, tap the Applications icon, then tap Settings, then tap More…, then tap USB utilities.

2. Tap Connect storage to PC.

3. Connect your phone to your PC using a USB cable.

4. Tap Turn on USB storage.

5. From your PC, open the folder to view your files.

6. Copy files between your PC and the memory card.

7. To exit, tap Turn off USB storage on your phone.

Important! Before you can use a VPN you must establish and configure it.

Note: You must first set up a Lock screen using either a PIN or a password.

Before you add a VPN you must determine which VPN protocol to use: PPTP (Point-to-Point Tunneling Protocol), L2TP (Layer 2 Tunneling Protocol), L2TP/IPSec PSK (Pre-shared key based L2TP/IPSec), or L2TP/IPSec CRT (Certificate based L2TP/IPSec).

1. From the Home screen, tap the Applications icon, then tap Settings, then tap More…, then tap VPN.

2. Tap Add VPN network.

3. Enter a name for the VPN network in the Name field.

4. Select a VPN type from the Type drop-down menu. The options are:

• PPTP (Point-to-Point Tunneling Protocol)

• L2TP/IPSec PSK (Layer 2 Tunneling Protocol / Internet Protocol Security Pre-Shared Key)

• L2TP/IPSec RSA

• IPSec Xauth PSK

• IPSec Xauth RSA

• IPSec Hybrid RSA

5. Enter the Server address and any other required fields.

6. Tap the Show advanced options check box to display additional VPN options.

7. Tap Save to save your VPN settings.

This option allows you to share your phone’s mobile data connection via USB.

1. From the Home screen, tap the Applications icon, then tap Settings, then tap More…, then tap Tethering and portable hotspots.

2. Connect your phone to your PC using a USB cable.

3. Tap USB tethering to add a checkmark and activate the feature. The USB tethering icon is displayed at the top of your screen.

This option allows you to share your phone’s mobile data connection as a portable Wi-Fi hotspot.

1. From the Home screen, tap the Applications icon, then tap Settings, then tap More…, then tap Tethering and portable hotspots, then tap Portable Wi-Fi hotspot.

2. Turn Portable Wi-Fi hotspots on by tapping the slider so that it changes to the ON position. The Portable Wi-Fi hotspot icon is displayed at the top of your screen.

Note: If your account has not been updated to enable the Wi-Fi hotspot feature, contact your service provider.

3. Tap Configure portable Wi-Fi hotspot.

4. Enter or edit the Network SSID, Security setting and Password.

5. Tap Next to move to the next field if applicable.

6. Tap Done when you are finished.

7. Tap Hide my device to create a checkmark if you want your device hidden from broadcast.

8. Tap Save.

1. Activate Wi-Fi on the device that wants to connect to your phone.

2. Find [GalaxySII_xxxx] (or your custom SSID) in the Wi-Fi network list and connect to it. XXXX are four randomly generated digits that will appear when you set up a Portable Wi-Fi hotspot on your device unless you customize the SSID.

The connected device can now use internet through your Portable Wi-Fi hotspot.

From the Tethering and portable hotspot menu (Settings > More… > Tethering and portable hotspot), tap Help for additional information.

Wi-Fi Direct allows device-to-device connections so you can transfer large amounts of data over a Wi-Fi connection.

1. From the Home screen, tap the Applications icon, then tap Settings, then tap More…, then tap Wi-Fi Direct.

2. Tap the OFF / ON icon to turn Wi-Fi Direct on.

To activate the data network, this option must be selected. It is set on by default.

1. From the Home screen, tap the Applications icon, then tap Settings, then tap More…, then tap Mobile networks.

2. Tap Use packet data to create a checkmark and activate the feature, or uncheck it to deactivate.

Data roaming allows you to connect to your service provider’s partner networks and access data services when you are out of your service providers area of coverage.

1. From the Home screen, tap the Applications icon, then tap Settings, then tap More…, then tap Mobile networks.

2. Tap Data roaming to create a checkmark and activate the feature, or uncheck it to deactivate.

To use Wi-Fi you need access to a wireless access point (hotspot). This section refers to mobile network APNs.

1. From the Home screen, tap the Applications icon, then tap Settings, then tap More…, then tap Mobile networks.

2. Tap Access Point Names.

A list of the Access Point names display. The active access point displays a green, filled circle to the right of the name.

Using this feature you can view the current network connection. You can also scan and select a network operator manually, or set the network selection to Automatic.

Important! You must deactivate data service prior to searching for an available network.

1. From the Home screen, tap the Applications icon, then tap Settings, then tap More…, then tap Mobile networks.

2. Tap Network operators. The current network connection displays at the bottom of the list.

3. Tap Search networks to manually search for a network.

4. Tap Select automatically to automatically select a network connection.

Note: Connecting to 2G networks slows the data transfer speed and time.

Alternatively, to set default behavior:

1. From the Home screen, tap the Applications icon, then tap Settings, then tap Wireless and network, then tap Mobile networks.

2. Tap Network operators.

3. Tap Default setup.

4. Tap Manual to locate and connect to a network manually, or tap Automatic to allow the device to automatically select a network.

To access the Call settings menu: From the Home screen, tap the Applications icon, then tap Settings, then tap Call.

Call rejection:

1. From the Home screen, tap the Applications icon, then tap Settings, then tap Call, then tap Call rejection to enable your phone to reject calls.

2. Tap Auto reject mode.

3. Select Off, All numbers, or Auto reject numbers.

4. Tap Auto reject list.

5. Tap the plus icon to manually add numbers to the Reject list.

6. Tap Unknown, to create a checkmark and automatically reject all unknown calls.

1. From the Home screen, tap the Applications icon, then tap Settings, then tap Call, then tap Set reject messages.

2. Tap the plus icon to manually add a reject message.

– or –

Tap one of the pre-written messages to be displayed when you want the call to be rejected. You can edit the message if desired.

3. Tap Save.

1. From the Home screen, tap the Applications icon, then tap Settings, then tap Call, then tap Call alert.

2. Tap Answer vibration to enable your phone to vibrate when the called party answers the phone.

3. Tap Call status tones to set the sound settings during a call then tap OK.

4. Tap Alerts on call to set the alert type.

1. From the Home screen, tap the Applications icon, then tap Settings, then tap Call, then tap Call answering/ending.

2. The following options are available:

• Answering key: Tap this option to be able to accept incoming calls by pressing the Home key.

• Automatic answering: Tap this option if you are using a headset and want the call to be automatically answered. Select the time interval before the call is automatically answered.

• The Power key ends calls: This option will allow you to end a call by pressing the power key without turning off the screen.

From the Home screen, tap the Applications icon, then tap Settings, then tap Call, then tap Turn on proximity sensor. When you answer a call, the screen will be turned off to save power.

1. From the Home screen, tap the Applications icon, then tap Settings, then tap Call, then tap Call forwarding, then tap Voice call.

2. Tap one of the following options:

• Always forward: allows you to forward all voice calls.

• Forward when busy: allows you to forward voice calls to a designated number instead of your voice mail number if you are on another phone call.

• Forward when unanswered: allows you to forward voice calls to a designated number instead of your voicemail number when there is no answer on your phone. You can also select the amount of time that the phone delays before forwarding.

• Forward when unreachable: allows you to forward voice calls to a designated number instead of your voicemail number when you are not in an area covered by your service provider or when your phone is switched off.

This menu is used to activate or deactivate Hearing Aid Compatibility for this device.

1. From the Home screen, tap the Applications icon, then tap Settings, then tap Call, then tap TTY mode.

2. Tap Full TTY. A green checkmark will appear. Tap TTY mode off to turn it off.

1. From the Home screen, tap the Applications icon, then tap Settings, then tap Call, then tap Additional settings.

2. Tap one of the following options:

• Caller ID: allows you to choose how your Caller ID will be displayed. Select Network Default, Hide number, or Show number.

• Call waiting: the network service informs you when someone is trying to reach you during another call. Tap to activate.

• Auto redial: automatically redials the last number if the call was either cut off or was unable to connect. Tap to activate.

• Fixed dialing numbers: allows you to restrict outgoing calls to a limited set of phone numbers.

FDN (Fixed Dialing Number) mode restricts your outgoing calls to a limited set of phone numbers. When this feature is enabled, you can make calls only to phone numbers stored in the FDN list on the SIM card.

Important! Not all SIM cards use a PIN2 code. If your SIM card does not, this menu does not display. The PIN2 code is provided by your carrier. Entering an incorrect PIN2 code could cause the phone to lock. Contact customer service for assistance.

Enabling FDN:

1. From the Home screen, tap the Applications icon, then Settings, then Call, then Additional settings, then Fixed dialing numbers.

2. Tap Enable FDN.

3. At the prompt, enter your PIN2 code and tap OK. FDN is enabled.

4. To disable FDN after it has been enabled, tap Disable FDN, enter your PIN2 code and tap OK.

Managing the FDN List:

Note: Before you can manage an FDN list a list must be created.

1. From the Home screen, tap the Applications icon, then Settings, then Call, then Additional settings, then Fixed dialing numbers.

2. Tap FDN list.

3. A list of all existing FDN numbers will be displayed.

1. From the Home screen, tap the Applications icon, then tap Settings, then tap Call, then tap Additional settings, then tap Fixed dialing numbers.

2. Tap Change PIN2.

3. At the prompt, enter your old PIN2 code.

4. At the prompt, enter a new PIN2 code.

5. Confirm your PIN2 code.

1. From the Home screen, tap the Applications icon, then tap Settings, then tap Call, then tap Voicemail service. Voicemail service provided by your carrier is the default.

2. Tap My carrier to remove the carrier Voicemail service (if you wish to set a different one, though options for setting a new one are not detailed here other than changing the number).

1. From the Home screen, tap the Applications icon, then tap Settings, then tap Call, then tap Voicemail.

2. Tap the Voice mail number field, backspace to erase the digits, and enter a new voicemail number using the keypad, then tap OK.

3. Tap OK.

From this menu you can control the sounds on the phone.

To access Sound settings: From the Home screen, tap the Applications icon, then tap Settings, then tap Sound.

Volume:

The Volume option allows you to change the volume for all phone sounds in one easy location.

1. From the Home screen, tap the Applications icon, then tap Settings, then tap Sound, then tap Volume.

2. Touch and drag the slider to adjust the sound volume for Media, Ringtone, Notifications, and System.

3. Tap OK.

Vibration intensity allows you to select how intense the vibration is for different options.

1. From the Home screen, tap the Applications icon, then tap Settings, then tap Sound, then tap Vibration intensity.

2. Touch and drag the slider to adjust the Vibration intensity for Ringtone, Notification, and Vibrate on screen tap.

Silent mode is convenient when you wish to stop the phone from making noise. In Silent Mode the speaker is muted and the phone only vibrates (if set to Vibrate) to notify you of incoming calls, or other functions that normally have a defined tone or sound as an alert.

1. From the Home screen, tap the Applications icon, then tap Settings, then tap Sound.

2. Tap Silent mode.

3. Tap Off, Vibrate, or Mute.

– or –

1. From the Home screen, press the Lock key until Phone options displays. Then select your desired silent mode option from the display.

To toggle Silent mode on/off once configured (e.g. from Vibrate to Sound or vice-versa):

1. Go to Settings > Sound.

2. Tap Silent mode to activate or deactivate this mode (the current mode displays).

This option allows you to set the ringtone.

1. From the Home screen, tap the Applications icon, then tap Settings, then tap Sound.

2. Tap Phone ringtone.

3. Tap a ringtone and tap OK.

This option allows you to set the ringtone that will sound for notifications and alarms.

1. From the Home screen, tap the Applications icon, then tap Settings, then tap Sound.

2. Tap Default Notifications.

3. Tap a ringtone and tap OK.

This option allows you to set your phone to vibrate and ring.

1. From the Home screen, tap the Applications icon, then tap Settings, then tap Sound.

2. Tap Vibrate and ring. A green checkmark appears, indicating it is active.

The System tone settings are used when you use the dialing pad, make a screen selection, lock your screen, or tap the screen.

1. From the Home screen, tap the Applications icon, then tap Settings, then tap Sound.

2. Tap any of the following options to create a checkmark and activate the feature:

• Keytones: makes a sound when you tap a key on the keyboard.

• Touch sounds: makes a sound when you touch the screen.

• Screen lock sound: makes a sound when your screen is locked or unlocked.

• Vibrate on screen tap: makes a vibration when you tap the screen.

In this menu, you can change various settings for the display such as the font, orientation, pop-up notifications, puzzle lock feature, animation, brightness, screen timeout, power saving mode, and tv out settings.

To access Display Settings: From the Home screen, tap the Applications icon, then tap Settings, then tap Display.

The following options display:

• Home screen wallpaper: allows you to set the home screen wallpaper.

• Lock screen wallpaper: allows you to set the lock screen wallpaper.

• Clock: allows you to display the clock on the lock screen.

• Weather: allows you to display the weather on the lock screen.

• Weather settings: allows you to have the temperature displayed in Fahrenheit or Celsius. You can also set the Auto refresh rate.

• Clock and weather position: allows you to set the location of the Clock and Weather to Top, Middle, or Bottom.

• Brightness: configures the LCD Brightness levels. Tap Automatic brightness to allow the phone to self-adjust or drag the slider and tap OK.

• Screen mode: allows you to set the screen mode to Dynamic, Standard, or Movie.

• Auto-rotate screen: allows you to switch the display orientation automatically when you rotate the phone.

• Screen timeout: adjusts the delay time before the screen automatically turns off. Selections are: 15 seconds, 30 seconds, 1 minute, 2 minutes, 5 minutes, and 10 minutes.

• Font style: allows you to set the font style that your phone will use. You can also tap Get fonts online to choose from a wider selection.

• Touch key light duration: allows you to set the time that the touch keys located on the bottom of your phone are lit.

• Auto adjust screen power: allows you to save power because the phone analyzes the displayed screen image and adjusts the LCD brightness.

• Gyroscope calibration: allows you to calibrate the gyro sensors. Place your device on a level surface and tap Calibrate.

Power Saving Mode allows you to manage your phone to conserve power.

1. From the Home screen, tap the Applications icon, then tap Settings, then tap Power saving.

2. Tap System power saving to create a checkmark and activate the feature. System power saving uses default settings to help save power on your phone.

– or –

Tap Custom power saving to create a checkmark and activate the feature. Custom power saving allows you to select the items that will be used to save power.

3. If you selected Custom power saving, tap Custom power saving settings to access the following options:

• Power saving on at: allows you to set the battery power level when Power saving mode will be enabled.

• Turn off Wi-Fi: automatically turns off Wi-Fi when you are not connected with Mobile AP.

• Turn off Bluetooth: automatically turns off Bluetooth when it is not in use.

• Turn off GPS: automatically turns off GPS when it is not in use.

• Turn off Sync: automatically turns off Sync when the phone is not synchronizing with the server.

• Brightness: allows you to manually adjust the brightness of the screen. Tap this option to enable the next Brightness option.

• Brightness (percentage): allows you to set the Brightness percentage of the screen.

• Screen timeout: allows you to set the time before the screen times out and goes into lock mode.

4. Tap Learn about power saving to learn about various ways to conserve battery power.

From this menu you can view the memory allocation for the memory card and USB as well as mount or unmount the SD card.

To view memory allocation:

From the Home screen, tap the Applications icon, then tap Settings, then tap Storage. The available memory displays under the Total space and Available space headings for both Device memory, USB storage, and SD card.

Formatting USB storage:

Tap Format USB storage to erase all data on the phone’s USB storage such as music and photos.

SD card management:

1. Tap Unmount SD card to unmount your SD card so that you can safely remove it, then tap OK.

2. Tap Format SD card to re-format your SD card. This will delete all data on your SD card including music, videos, and photos.

3. Tap Format SD card again.

4. Tap Delete all to continue or press the back icon to cancel.

See how much battery power is used for device activities.

1. From a Home screen, tap the Applications icon, then tap Settings, then tap Battery.

The battery level displays in percentage. The amount of time the battery was used also displays. Battery usage displays in percentages per application.

2. Tap Screen, Cell standby, Android OS, or any other listed application to view how it is affecting battery use.

Note: Other applications may be running that affect battery use.

See how memory is being used by Downloaded or Running applications.

1. From a Home screen, tap the Applications icon, then tap Settings, then tap Applications.

2. Tap Downloaded, On SD card, Running, or All to display memory usage for that category of applications.

The graph at the bottom of the Downloaded tab shows used and free device memory. The graph at the bottom of the Running tab shows used and free RAM.

Displays apps you have downloaded onto your device.

1. From a Home screen, tap the Applications icon, then tap Settings, then tap Applications.

2. Tap the Downloaded tab to view a list of all the downloaded applications on your device.

3. To switch the order of the lists displayed in the Downloaded tabs, press the menu icon then tap Sort by size or Sort by name.

4. Tap an application to view and update information about the application, including memory usage, default settings, and permissions. From here you can typically Clear data, Clear cache, or Uninstall the application.

View and control services running on your device.

1. From a Home screen, tap the Applications icon, then tap Settings, then tap Applications.

2. Tap the Running tab. All the applications that are currently running on the device display.

3. Tap Show cached processes to display all the cached processes that are running. Tap Show services in use to switch back.

4. Tap one of the applications/services to view application information. The following options may display:

• Stop: Stops the application from running on the device. This is usually done prior to uninstalling the application.

• Report: Report failure and other application information.

Warning! Not all services can be stopped. Stopping services may have undesirable consequences on the application or Android System.

Note: Options vary by application.

This menu allows you to set up, manage, and synchronize accounts, including your Google and email accounts.

Adding an Account:

1. From a Home screen, tap the Applications icon, then tap Settings, then tap Accounts and sync.

2. Tap Add account.

3. Tap one of the account types.

4. Use the keyboard and follow the prompts to enter your credentials and set up the account.

Removing an Account:

Important! Removing an account also deletes all of its messages, contacts, and other data from the device.

1. From a Home screen, tap the Applications icon, then tap Settings, then tap Accounts and sync.

2. Tap an account to display its settings.

3. Tap Remove account, then tap Remove account at the prompt to remove the account and delete all its messages, contacts, and other data.

Synchronizing Account:

Select the items you want to synchronize on your account such as Books, Calendar, Contacts, and more.

1. From a Home screen, tap the Applications icon, then tap Settings, then tap Accounts and sync.

2. To synchronize all accounts, tap Sync all. Tap Cancel sync to stop the synchronization.

3. On the Auto-sync field, tap the OFF / ON icon to turn Auto-sync on or off, which controls whether changes you make to information on your device or on the web are automatically synced with each other.

To sync account information manually:

1. From a Home screen, tap the Applications icon, then tap Settings, then tap Accounts and sync.

2. Tap on an account.

3. Tap Sync Now to synchronize all data for the selected account.

– or –

Under Data and synchronization, tap the account data to synchronize, such as Books, Calendar, Contacts, Email, and so on.

The Location services settings allow you to set up how the phone will determine your location and the sensor settings for your phone.

1. From the Home screen, tap the Applications icon, then tap Settings, then tap Location services.

2. Tap any of the following options to create a checkmark and activate the service:

• Google location service: allows applications to use data from other sources such as mobile networks and Wi-Fi to help determine your location.

• GPS satellites: allows applications to use GPS to pinpoint your location.

• Use sensor aiding: this option enhances the positioning capabilities of your phone and conserves power using sensors.

• Location and Google search: allows Google to use your location data for improved search results and other services.

Choose settings for unlocking your screen.

1. From the Home screen, tap the Applications icon, then tap Settings, then tap Security.

2. Tap Screen lock for these options:

• None: No pattern, PIN, or password is required. The screen will never lock.

• Slide: Swipe the screen to unlock it.

• Face unlock: The phone recognizes your face and unlocks the phone. Follow the on-screen instructions to set it up.

• Pattern: A screen unlock pattern is a touch gesture you create and use to unlock your device. Follow the prompts to create or change your screen unlock pattern.

• PIN: Select a PIN to use for unlocking the screen.

• Password: Create a password for unlocking the screen.

This option allows you to show owner information on the lock screen. You can also enter text to display on the lock screen.

1. From the Home screen, tap the Applications icon, then tap Settings, then tap Security, then tap Owner information.

2. Tap the Show owner info on lock screen checkbox to create a checkmark if you want your owner information displayed.

3. Enter text that you would like displayed on your lockscreen.

4. Press the back icon twice to save the new text and return to the previous screen.

To require a numeric PIN or password to decrypt your device each time you power it on or encrypt the data on your SD card each time it is connected:

Tip: Make sure your battery is charged more than 80 percent. Encryption may take an hour or more.

1. From the Home screen, tap the Applications icon, then tap Settings, then tap Security.

2. Tap Encrypt device. For more information, read the displayed help screen. This will encrypt the phone’s internal storage.

3. Tap Encrypt SD card to enable the encryption on SD card data that requires a password be entered each time the microSD card is connected.

Prevent another user from using your SIM card to make unauthorized calls or from accessing information stored on your SIM card by protecting the information using a PIN code. When enabled, your phone will ask for a PIN number each time you use the phone. Using this option you can also change your SIM PIN number.

1. From the Home screen, tap the Applications icon, then tap Settings, then tap Security.

2. Tap Set up SIM card lock.

3. Tap Lock SIM card, enter your SIM PIN code, then tap OK.

Note: You must activate Lock SIM card before you can change your SIM PIN code.

To change the SIM PIN:

4. Tap Change SIM PIN.

5. Enter your old SIM PIN code and tap OK.

6. Enter your new SIM PIN code and tap OK.

7. Re-type your new SIM PIN code and tap OK.

When enabled, password characters display briefly as you touch them while entering passwords.

1. From the Home screen, tap the Applications icon, then tap Settings, then tap Security.

2. Tap Make passwords visible to create a checkmark and enable or disable the display of password characters.

The Device Administration feature allows you to select one or more administration applications that control your device for security purposes (for example, if your phone is lost or stolen). These applications enforce remote or local device security policies.

Some of the features a device administration application might control are:

• Setting the number of failed password attempts before the device is restored to factory settings.

• Automatically locking the device.

• Restoring factory settings on the device.

Note: If a device uses multiple enabled administration applications, the strictest policy is enforced.

1. From the Home screen, tap the Applications icon, then tap Settings, then tap Security.

2. Tap Device administrators.

3. Select a device administrator and follow the prompts. If no device administrators are listed, you may need to install an application that provides this functionality.

This feature allows you to download and install non-Market applications.

1. From the Home screen, tap the Applications icon, then tap Settings, then tap Security.

2. Tap Unknown sources. A check mark is displayed to indicate it is active. Tap again to disable.

Warning! Enabling this option causes your device and personal data to be more vulnerable to attack by applications from unknown sources.

If a certificate authority (CA) certificate gets compromised or for some other reason you do not trust it, you can disable or remove it.

1. From the Home screen, tap the Applications icon, then tap Settings, then tap Security.

2. Tap Trusted credentials.

The trusted credentials screen has two tabs:

• System: Displays CA certificates that are permanently installed in the ROM of your device.

• User: Displays any CA certificates that you installed, for example, in the process of installing a client certificate.

3. Tap a CA certificate to examine its details. A scrolling screen displays the details.

4. Scroll to the bottom of the details screen and tap Disable to disable a System certificate or Remove to remove a User certificate.

Note: The Remove button is only displayed when a CA certificate is installed by the User. Otherwise, only the Disable button is displayed.

Caution! When you disable a system CA certificate, the Disable button changes to Enable, so you can enable the certificate again, if necessary. When you remove a user-installed CA certificate, it is permanently deleted and must be re-installed, if needed.

5. Tap OK on the details screen to return to the certificate list. When a certificate is enabled, a check mark appears in the check box next to it in the list.

Install encrypted certificates from an installed memory card.

Note: You must have installed a memory card containing encrypted certificates to use this feature.

1. From the Home screen, tap the Applications icon, then tap Settings, then tap Security.

2. Tap Install from device storage, then choose a certificate and follow the prompts to install.

Clear stored credentials.

Note: This setting only appears if you have installed encrypted certificates.

1. From the Home screen, tap the Applications icon, then tap Settings, then tap Security.

2. Tap Clear credentials to remove all certificates.

You can change the language used by your device by following these steps:

1. From the Home screen, tap the Applications icon, then tap Settings, then tap Language and input, then tap Language.

2. Tap a language from the list.

You can change the keyboard used by your device by following these steps:

1. From the Home screen, tap the Applications icon, then tap Settings, then tap Language and input.

2. Tap Default and select a keyboard. Select either Android keyboard, Samsung keypad, or Swype.

3. Tap Configure input methods.

4. Tap the settings icon next to the input method that you would like to configure the settings for.

5. Based on your selection of input method, the appropriate settings will appear and are explained in subsequent sections (Android Keyboard settings, Google voice typing settings, Samsung Keypad settings, Swype Settings).

From this menu you can set Android keyboard options.

1. From the Home screen, tap the Applications icon, then Settings, then Language and input, then Android keyboard (if it’s your default or you wish to configure it).

2. Tap the settings icon next to Android keyboard.

3. The following options are available:

• Input languages: tap on a language that you want to input.

• Auto-capitalization: check this field to have the keyboard automatically capitalize the first letter of the first word after a period, the first word in a text field, and all words in name fields.

• Vibrate on keypress: check this field to have the phone vibrate each time you touch a key on the keyboard.

• Sound on keypress: check this field to play a sound each time you touch a key on the keyboard.

• Popup on keypress: check this field to show a small popup of each character that you type.

• Show settings key: allows you to select how the settings key will be displayed.

• Voice input key: check this field to be able to enter text in a message by talking.

• Auto correction: allows you to correct mistyped words by using the spacebar and punctuation.

• Show correction suggestions: check this field to show suggested words in a field above the keyboard as you type.

• Advanced settings: the following advanced settings are displayed:

– Key popup dismiss delay: allows you to set the delay time that key pop-ups are dismissed. Select No delay or Default.

– Suggest Contact names: allows you to use names from your Contacts for suggestions and corrections.

– Bigram suggestions: uses the previous word to help improve suggestions.

– Enable recorrections: allows you to see suggestions when you make recorrections.

– Keypress vibration duration settings: allows you to set the time that each keypress vibrates. Drag the slider bar to the desired time.

– Keypress sound volume settings: If the keys are set to make a sound when pressed, this setting allows you to set the volume.

From this menu you can set Google voice typing options.

1. From the Home screen, tap the Applications icon, then tap Settings, then tap Language and input.

2. Tap the settings icon next to Google voice typing.

3. The following options are available:

• Select input languages: tap on a language that you want to input. Select Automatic to use the local language or select a language from the list.

• Block offensive words: tap to create a checkmark and enable the blocking of recognized offensive words from the results of your voice-input Google typing.

From this menu you can set Samsung keypad options.

1. From the Home screen, tap the Applications icon, then tap Settings, then tap Language and input.

2. Tap the settings icon next to Samsung keypad.

3. Tap the Portrait keypad types field and select a text input method: Qwerty Keypad or 3×4 Keypad.

4. Tap the Input languages field and tap one of the languages.

5. To use XT9 Predictive text method, tap XT9 to create a checkmark and enable the feature.

6. If you are using XT9 Predictive text method, tap XT9 advanced settings (see separate Q&A for XT9 Advanced Settings).

7. Tap the Keypad sweeping field to be able to sweep the keypad and change from ABC to ?123 mode.

8. Tap the Character preview field to display small pop-up windows to verify the character you entered.

9. Tap the Auto-capitalization field to enable automatic capitalization.

10. Tap Voice input to activate the Voice input feature. Voice input is an experimental feature using Google’s networked speech recognition application.

11. Tap Auto-full stop to activate the Auto-full stop feature. When you double space in a message, a period and space is added and the keyboard is placed into Uppercase mode so you can start the new sentence with a capital letter.

12. Tap Tutorial for a short tutorial on using the Samsung keypad.

The following XT9 Advanced settings are only available if the XT9 field has been selected in Samsung Keypad settings.

1. From the Home screen, tap the Applications icon, then Settings, then Language and input.

2. Tap the settings icon next to Samsung keypad.

3. Tap XT9 Advanced settings.

4. Tap the Word completion field to enable word completion. Your phone will predict how to complete the word you have started.

5. Tap the Word completion point field to set how many letters should be entered before a prediction is made.

6. Tap the Spell correction field. This option corrects typographical errors by selecting from a list of possible words.

7. Tap the Next word prediction field to enable word prediction for the next word.

8. Tap the Auto-append field to automatically add predictions to the word you are typing.

9. Tap the Auto-substitution field to automatically replace words that you are typing. This option will help for accidental misspellings.

10. Tap the Regional correction field. This option sets the device to automatically correct mistyped words according to normal spelling for your region.

11. Tap the Recapture field. This option sets the device to re-display the word suggestion list when you select the wrong word from the list.

12. To add a new word to the T9 dictionary: Tap the XT9 my words field, then press the menu icon then Add. Enter the new word in the Register to XT9 my words field, then tap Done.

13. To add words to substitute (for example youve becomes you’ve) tap XT9 auto-substitution.

14. A list of substitutions is displayed. If you don’t see the substitution you want, press the menu icon then Add, and then input the Shortcut word and Substitution word. Tap Done.

To configure Swype settings:

1. From the Home screen, tap the Applications icon, then tap Settings, then tap Language and input.

2. Tap the settings icon next to Swype.

3. Tap one of the following Swype settings:

• Select Input Method: allows you to switch between different keyboard types.

• How to Swype: provides tips on how to learn to use Swype.

• Personal dictionary: Allows you to setup and manage your own dictionary.

• Preferences: Allows you to view and modify the following Swype options:

– Audio feedback: When enabled, plays sounds as you enter text.

– Vibrate on keypress: check this field to have the phone vibrate each time you touch a key on the keyboard.

– Show tips: When enabled, the device displays helpful tips.

– Auto-spacing: When enabled, inserts spaces automatically when you pause entering text.

– Auto-capitalization: When enabled, automatically capitalizes the first letter of the first word in a sentence.

– Show complete trace: When enabled, briefly display the Swype trace.

– Word suggestion: When enabled, suggests possible matching words as you enter text.

– Speed vs. accuracy: Send the sensitivity of Swype text recognition.

– Reset Swype’s dictionary: Deletes all of the words you have added and loads the default dictionary.

– Version: View the current Swype software version.

• Language Options: Allows you to set the language that you will be using.

Speech Settings (Voice search):

This menu allows you to set the speech settings for Voice search.

1. From the Home screen, tap the Applications icon, then tap Settings, then tap Language and input.

2. Tap Voice recognition and select either Google or Samsung powered by Vlingo as your Voice recognition engine.

3. Tap Voice search to configure:

• Language: Choose a language for your voice input.

• SafeSearch: Set the sensitivity for filtering of explicit images from the results of your voice-input Google searches.

• Block offensive words: Enable or disable blocking of recognized offensive words from the results of your voice-input Google searches.

Voice output (Text-to-speech):

Voice output provides audible readout of text, for example, the contents of email messages.

1. From the Home screen, tap the Applications icon, then tap Settings, then tap Language and input.

2. Tap Text-to-speech output and select the preferred TTS engine. Google Text-to-speech engine is the default.

3. Tap the settings icon next to the preferred TTS engine to configure the following settings:

• Language: allows you to set the language for spoken text.

• Settings for Google Text-to-speech engine: allows you to view Open Source Licenses.

• Install voice data: allows you to install voice data for speech synthesis.

4. From the Text-to-speech output screen, scroll down to the General heading to access the following options:

• Speech rate: Set the speed at which the text is spoken.

• Listen to an example: Play a sample of speech synthesis (available if voice data is installed).

• Driving mode: Incoming calls and new notifications are read aloud when enabled.

• Driving mode settings: allows you to select items that will be read out when received or activated.

This option sets your Pointer speed.

1. From the Home screen, tap the Applications icon, then tap Settings, then tap Language and input.

2. Tap Pointer speed then drag the slide to the right to go faster or to the left to go slower.

3. Tap OK to save your setting.

Back Up My Data:

By setting this option, the Google server will back up all of your settings and data.

1. From the Home screen, tap the Applications icon, then tap Settings, then tap Backup and reset.

2. Tap Back up my data to enable or disable back up of application data, Wi-Fi passwords, and other settings to the Google server.

Backup Account:

If you have enabled the Back up my data option, then the Backup account option is available.

1. From the Home screen, tap the Applications icon, then tap Settings, then tap Backup and reset.

2. Tap Backup account and tap your Google Gmail account or tap Add account to set your Google Gmail account to be backed up to the Google server.

Automatic Restore:

By setting this option, when you reinstall an application, all of your backed up settings and data will be restored.

1. From the Home screen, tap the Applications icon, then tap Settings, then tap Backup and reset.

2. Tap Automatic restore to enable or disable automatic restoration of settings from the Google server.

From this menu you can reset your phone and sound settings to the factory default settings.

Warning! Performing a Factory data reset will erase all data from your phone and internal SD card, including your Google account, system and application data and settings, and downloaded applications. It will not erase current system software, bundled applications, and external SD card files such as music and photos (unless Format USB storage is also selected for internal SD/USB storage).

1. From the Home screen, tap the Applications icon, then tap Settings, then tap Backup and reset.

2. Tap Factory data reset. The Factory data reset screen displays reset information.

3. Tap Format USB storage to create a checkmark if you want to erase all data from USB storage (which may refer to internal phone storage partitioned as USB storage) including music and photos.

4. Tap Reset phone, then follow the prompts to perform the reset.

This menu allows you to select the Audio output mode when using a car or desk dock.

1. From the Home screen, tap the Applications icon, then tap Settings, then tap Dock.

2. Tap Audio output mode to use the external dock speakers when the phone is docked.

This menu allows you to change the current time and date displayed.

1. From the Home screen, tap the Applications icon, then tap Settings, then tap Date and time.

2. Tap Automatic date and time to allow the network set the date and time. (Uncheck this to set manually).

3. Tap Automatic time zone to allow the network set the time zone. (Uncheck this to set manually).

Important! Deactivate Automatic date and time to manually set the rest of the options.

4. Tap Set date and use the plus or minus icons to set the Month, Day, and Year then tap Set.

5. Tap Set time and use the plus or minus icons, set Hour, and Minute. Tap PM or AM, then tap Set.

6. Tap Select time zone, then tap a time zone.

7. Optional: Tap Use 24-hour format. If this is not selected the phone automatically uses a 12-hour format.

8. Tap Select date format and tap the date format type.

Accessibility services are special features to make using the device easier for those with certain physical disabilities. Use the Accessibility settings to activate these services.

1. From the Home screen, tap the Applications icon, then tap Settings, then tap Accessibility.

2. Tap TalkBack to activate the TalkBack feature.

Note: TalkBack, when installed and enabled, speaks feedback to help blind and low-vision users.

Important! TalkBack can collect all of the text you enter, except passwords, including personal data and credit card numbers. It may also log your user interface interactions with the device.

3. Tap The power key ends calls option to create a checkmark if you want to press the power key to end calls. This will not turn off the screen.

4. Tap Auto-rotate screen to automatically rotate the screen from landscape to portrait when you rotate your phone.

5. Tap Tap and hold delay and then tap a delay time. Options are: Short, Medium, and Long.

6. Tap Install Web scripts if want to allow apps to install scripts from Google that make their Web content more accessible. Tap Allow.

The Motion settings allow you to set up various Motion activation services.

1. From the Home screen, tap the Applications icon, then tap Settings, then tap Motion.

2. Tap Motion activation to activate the feature. A checkmark is displayed.

3. The following options are available. Tap the ON/OFF icon on the top bar to activate each option:

• Tilt to zoom: allows you to use the Tilt feature to reduce or enlarge the screen when in Gallery or Browser. Tap Tilt to zoom, then tap Sensitivity and set the sensitivity using the slider. A checkmark appears in the Use motion box. Tap Learn about tilt for more information.

• Pan to edit: allows you to use the Panning feature to move icons from one page to another in Home and Application edit mode. Tap Pan to edit, then tap Sensitivity and set the sensitivity using the slider. Tap Learn about panning for more information.

• Double tap: automatically prepares your phone for voice commands in Voice talk. Tap to activate. Tap Learn about double tap for more information.

• Turn over to mute: allows you to mute incoming calls and sounds by turning your phone over. Tap to activate. Tap Learn about turn over for more information.

Use the Developer options to set options for application development.

Note: These settings are used for development purposes.

To access Developer Options: From the Home screen, tap the Applications icon, then Settings, then Developer options.

USB Debugging:

When enabled, allows debugging when the device is attached to a PC by a USB cable.

1. Access Developer options.

2. Tap USB debugging to enable or disable the setting. When enabled, a check mark appears in the check box.

Allow Mock Locations:

This setting is used by developers when developing location-based applications.

1. Access Developer options.

2. Tap Allow mock locations to enable or disable the setting. When enabled, a check mark appears in the check box.

Desktop Backup Password:

Protect the desktop with a backup password ID.

1. Access Developer options.

2. Tap Desktop backup password.

3. In the Settings screen, enter the current full backup password, the new password for full backups, then enter the new password again.

4. Tap Set backup password to save the password change.

User Interface Options:

Configure the user interface by setting the behavior for the way the screen behaves when using applications or displaying data.

1. Access Developer options.

2. Tap the check box next to each option to enable:

• Strict mode enabled: Makes the screen flash when applications perform long operations on the main thread.

• Show pointer location: Highlights the data that was touched on the screen.

• Show touches: Displays touch interactions on the screen.

• Show screen updates: Areas of the screen flash when they update.

• Show CPU usage: Screen highlights the current CPU usage.

• Force GPU rendering: Uses a 2D acceleration in applications.

• Window animation scale: Configure the scale for animation (ranges from off to 10x).

• Transition animation scale: Configure the scale for transitioning when using animation (ranges from off to 10x).

Application Options:

1. Access Developer options.

2. Tap Do not keep activities to destroy every activity as soon as the application is closed.

3. Tap Limit background processes to set the number of processes that can run in the background. Options are: Standard limit, No background processes, and 1 to 4 processes at most.

4. Tap Show all ANRs to display a prompt when applications running in the background are not responding.

This menu contains legal information, system tutorial information, and other phone information such as the model number, firmware version, baseband version, kernal version, and software build number.

To access phone information:

From the Home screen, tap the Applications icon, then tap Settings, then tap About phone.

The following information displays:

• Software update: allows you to update your phone software, if available.

• Status: displays the battery status, the level of the battery (percentage), network, signal strength, mobile network type, service state, roaming status, mobile network state, the phone number for this device, IMEI number, IMEI SV, IP address, Wi-Fi MAC address, Bluetooth address, Serial number, and Up time.

• Legal information: select one of the following options: Open source licenses, Google legal, License settings.

• Model number: displays the phone’s model number.

• Android version: displays the android version loaded on this handset.

• Baseband version: displays the baseband version loaded on this handset.

• Kernel version: displays the kernel version loaded on this handset.

• Build number: displays the software, build number.

Software Update:

The AT&T Software Update feature enables you to use your phone to connect to the network and upload any new phone software directly to your phone. The phone automatically updates with the latest available software when you access this option.

1. From the Home screen, tap the Applications icon, then Settings, then About phone, then Software update.

2. Tap Check for updates.

3. At the Software update prompt, tap OK to continue.

4. The phone automatically updates the software (if available), otherwise, when the Current software is up to date prompt is displayed, tap OK.

5. When updating software, once the update file is downloaded, you can delay the update on the start screen by postponing it for a certain period of time. If you want to resume the update before the selected time, tap Continue update.

The Browser is your access to the mobile web.

Accessing the Mobile Web:

From the Home screen, tap the Web icon. The AT&T/YAHOO! mobile homepage (or your set homepage) displays.

Navigating with the Browser:

1. To select an item, tap an entry.

2. To scroll through a website, sweep the screen with your finger in an up or down motion.

3. Sweep the screen left to right to move laterally across a web page.

4. To return to the previous page, press the back icon.

There are several ways to Zoom in and out on your browser. After tapping on a link or article, use one of these methods:

• Tilting: Tap and hold the screen at two points then tilt the device back and forth to reduce or enlarge the screen. You must first enable motion in the Settings section.

• Double tap: Quickly tap the screen twice on the web page to zoom in or out.

• Pinching: Sweep in opposite directions at the same time to zoom in or out (use a pinching-in or pinching-out motion).

From the browser home page or any web page, press the menu icon to access the following options:

• Refresh: reloads the current page.

• Forward: forwards the browser to another web page.

• New window: displays a new window so you can browse multiple URLs.

• New incognito window: displays a new window that is not tracked on your web history or search history. Pages that you view incognito are marked with the incognito symbol.

• Add bookmark: allows you to add a URL to your bookmark list.

• Share page: allows you to share the page using Gmail or as a message.

• Find on page: allows you to search in the current page.

• Desktop view: Your browser displays a website in a modified format that makes it easier to read or displays a website the same way it would appear on your PC.

• Save for offline reading: saves the web page so you can read it later even when offline.

• Brightness/Color: allows you to adjust the brightness and color of your display.

• Page info: displays information about the selected page.

• Downloads: displays the download history.

• Print: allows you to print the screen or web page on a Samsung printer using Wi-Fi.

• Settings: allows you to modify your web settings.

Enter a URL:

You can access a website quickly by entering the URL. Websites are optimized for viewing on your phone.

1. Tap the URL field at the top of your screen.

2. Enter the URL using the on-screen keypad. The website displays.

Search the Internet:

To perform an internet search using keywords, follow these steps:

1. From the Google homepage (or a search bar), tap the Web Search field.

2. Enter the keyword(s) to search using the on-screen keypad and tap the search icon.

3. Tap a link to view the website.

You can have up to eight Internet windows open at one time.

To add a new window:

1. From your browser, press the menu icon then tap New window. A new browser window is opened.

To manage open windows:

2. Tap the windows icon to see thumbnails of all open windows.

3. Tap a window listing to open up that Internet window.

4. Tap the ‘X’ icon at the top right corner of the web page thumbnail to delete the window.

While navigating a website, you can bookmark a site to quickly and easily access it at a future time.

Using Bookmarks:

1. From the Home webpage (browser), tap the bookmark icon. The Bookmarks page is displayed. You can also view your Most visited websites and view your History here.

2. Press the menu icon on the Bookmarks page to display the following options:

• Bookmark last-viewed page: Creates a new bookmark for the last webpage that you viewed (if you navigated away from it before bookmarking).

• List/Grid view: You can select Grid view (default) or List view.

• Create folder: Creates a new bookmark folder.

• Change order: Allows you to move pages around on the Bookmarks page.

• Move to folder: Allows you to move a page to a folder.

• Delete: Allows you to delete a bookmark.

3. Tap a bookmark to view the webpage, or touch and hold a bookmark for the following options:

• Open: Opens the webpage of the selected bookmark.

• Open in new window: Opens the webpage in a new window.

• Edit bookmark: Allows you to edit the name or URL of the bookmark.

• Add shortcut to home screen: Adds a shortcut to the bookmarked webpage to your phone’s Home screen.

• Share link: Allows you to share a URL address via Bluetooth, Email, etc.

• Copy link URL: Allows you to copy the URL address.

• Delete bookmark: Allows you to delete a bookmark.

• Set as homepage: Sets the bookmark to your new homepage.

Adding Bookmarks:

1. From any webpage you want to bookmark, tap the menu icon, then tap Add bookmark.

2. Use the on-screen keypad to enter the name of the bookmark, the URL, and the Folder.

3. Tap the save/checkmark icon.

4. “Saved to bookmarks” will appear at the bottom of the page.

Editing Bookmarks:

1. From the Bookmarks page, tap and hold the bookmark you want to edit.

2. Tap Edit bookmark.

3. Use the on-screen keypad to edit the name of the bookmark or the URL.

4. Tap the save/checkmark icon.

Deleting Bookmarks:

1. From the Bookmarks page, tap and hold the bookmark you want to delete.

2. Tap Delete bookmark.

3. At the Delete confirmation window, tap OK.

Emptying the Cookies:

A cookie is a small file which is placed on your phone by a website during navigation.

1. From the Home webpage (browser), press the menu icon, then tap Settings, then tap Privacy and security, then tap Clear all cookie data.

2. At the Clear prompt, tap OK to delete the cookies or tap Cancel to exit.

Using your History:

The History list provides you with a list of the most recently visited websites.

1. From the Home webpage (browser), tap the bookmark icon, then tap History. A list of your most recently visited websites is displayed with Name and URL address.

2. Tap on a category such as Today or Most visited.

3. Tap any entry to display the webpage.

4. To clear history, from the History list, press the menu icon then tap Clear history.

Saved Pages (Offline reading):

The Saved pages list provides you with a list of the websites that you have saved.

1. From the Home webpage (browser), tap the bookmark icon, then tap Saved pages. A list of your saved webpages is displayed with Name and URL address.

2. Tap any entry to display the webpage.

To make adjustments in your browser settings, follow these steps:

1. From the browser, tap the menu icon, then tap Settings.

2. The following options are available:

General:

• Set home page: Sets the current home page for the Web browser.

• Form auto-fill: allows you to fill in web forms with a single tap.

• Auto-fill text: allows you to enter text to be used in the Form auto-fill feature.

Privacy and security:

• Clear cache: Deletes all currently cached data. Tap OK to complete the process.

• Clear history: Clears the browser navigation history. Tap OK to complete the process.

• Show security warnings: Notifies you if there is a security issue with the current website.

• Accept cookies: Allows sites, that require cookies, to save and read cookies from your device.

• Clear all cookie data: Deletes all current browser cookie files.

• Remember form data: Allows the device to store data from any previously filled out forms. Remove the checkmark to disable this function.

• Clear form data: Deletes any stored data from previously filled out forms. Tap OK to complete the process.

• Enable location: Allows websites to request access to your location.

• Clear location access: Clears location access for all websites. Tap OK to complete the process.

• Remember passwords: Stores usernames and passwords for visited sites. Remove the checkmark to disable this function.

In the browser settings, select “Clear passwords”. Tap OK to complete the process.

In browser Accessibility settings, enable “Force zoom”.

In browser Accessibility settings, use the “Text size” option to preview the text size, scale the text size using a slider bar, and minimize the font size using a slider bar.

In browser Accessibility settings, use “Inverted rendering” to select Inverted rendering (black becomes white and vice versa), and adjust the Contrast using a slider bar.

In browser Advanced settings, use “Select search engine” to set your default search engine to Google, Yahoo!, or Bing.

In browser Advanced settings, “Open in background” launches new pages in a separate page and displays them behind the current one. Remove the checkmark to disable this function.

In browser Advanced settings, “Enable JavaScript” enables Javascript for the current Web page. Without this feature, some pages may not display properly. Remove the checkmark to disable this function.

In browser Advanced settings, enable “Enable plug-ins”.

In browser settings, use the “Default storage” option.

In browser settings, use “Website settings”.

In browser settings, use “Default zoom”. Set to Far, Medium, or Close.

In browser settings, enable “Open pages in overview”.

In browser settings, enable “Auto-fit pages”.

In browser settings, “Block pop-ups” prevents popup advertisement or windows from appearing on-screen. Remove the checkmark to disable this function.

In browser settings, use “Text encoding”.

In browser settings, use “Reset to default”.

In browser Bandwidth management settings, enable “Preload search results”.

In browser settings, enable “Load images”.

In browser Labs settings, use “Quick controls” by swiping your thumb from the left or right edge of the screen.

In browser Labs settings, enable “Full screen”.

1. From the Home screen, tap Settings.

2. Tap the ON/OFF slider, located to the right of the Wi-Fi field, to turn Wi-Fi ON.

1. From the Home screen, tap Settings → Wi-Fi. The network names and security settings (Open network or Secured with WEP) of detected Wi-Fi networks are displayed in the Wi-Fi networks section.

2. Tap the network you want to connect to.

Note: When you select an open network, you will be automatically connected to the network.

3. Enter a wireless password if necessary.

1. Tap Add network.

2. Enter the Network SSID. This is the name of your Wireless Access Point.

3. Tap the Security field and select a security option. This must match the current security setting on your target WAP.

4. If secured, you will also need to enter your WAP’s password.

5. Tap Save to store the new information and connect to your target WAP.

Note: The next time your device connects to a previously accessed or secured wireless network, you are not prompted to enter the WAP key again, unless you reset your device back to its factory default settings.

1. From the Home screen, tap Settings.

2. Tap the ON/OFF slider, located to the right of the Wi-Fi field, to turn Wi-Fi OFF.

1. From the Home screen, tap Settings → Wi-Fi.

2. Tap Scan. All available Wi-Fi networks are displayed.

The Wi-Fi icon with solid waves and up/down arrows displays when Wi-Fi is connected, active, and communicating with a Wireless Access Point (WAP).

The Wi-Fi icon with faded waves and an exclamation mark displays when Wi-Fi is active but there is a communication issue with the target Wireless Access Point (WAP).

The Wi-Fi icon with two arrows displays when connected to another device using Wi-Fi Direct.

The Wi-Fi settings – Advanced menu allows you to set up many of your device’s Wi-Fi service, including:

• Setting your Wi-Fi sleep policy

• Viewing your device’s MAC Address

• Configuring use of either a DHCP or Static IP

1. From the Home screen, tap Settings → Wi-Fi.

2. Press Advanced.

1. From the Home screen, tap Settings → More….

2. Tap the ON/OFF slider, located to the right of the Wi-Fi Direct field, to turn Wi-Fi Direct ON.

1. Turn on Wi-Fi Direct on your phone.

2. At the Wi-Fi Direct prompt, tap OK.

3. From the Settings screen, tap Wi-Fi Direct.

4. Repeat steps 1 – 3 on the other device you want to connect with. The steps on a different model of phone, may be different.

5. On your phone, tap Scan. The device scans for other Wi-Fi Direct devices.

6. Once the device you want to connect to is displayed, tap on it.

7. The other device has 2 minutes to tap OK for the connection to be made.

8. Once connected, the other device will show as Connected in your list of Wi-Fi Direct devices and the Wi-Fi Direct icon will display at the top of your screen.

In the Wi-Fi Direct settings, press the menu key, then press Device name.

In the Wi-Fi Direct settings, press the menu key, then press Help.

1. View the information that you want to share. For example, if you want to share a photo, find the photo in your camera viewer or My Files folder, then tap the Share, Share via, or Send via option.

2. Tap the Wi-Fi Direct option.

3. Tap the connected device name. For example, Android_49ba.

4. The other device will receive a prompt to receive the information and must tap OK.

5. The file is transferred and the other device will receive a screen notification that a Wi-Fi file has been received. The file can be found in My Files in the ShareViaWifi folder.

Note: Depending on the other device model, the prompts and shared folder information may differ.

1. From the Home screen, tap the applications icon → AT&T Smart Wi-Fi.

Note: The first time you use the AT&T Smart Wi-Fi, you will need to download the application from Play Store.

2. At the Install screen, tap Ok.

3. Sign on to your Google account if you have not already done so.

4. Follow the on-screen instructions to download the updated application from Play Store.

5. Read the License Agreement and tap Accept to continue.

6. At the Welcome screen, tap OK.

7. At the Initial Setting screen, tap Yes if you want AT&T Smart Wi-Fi to automatically connect to any hotspot that is available for public use. Otherwise, tap No.

8. Follow the on-screen instructions to use AT&T Wi-Fi.

1. From the Home screen, tap Settings.

2. Tap the ON/OFF slider, located to the right of the Bluetooth field, to turn Bluetooth ON. When active, the Bluetooth icon appears within the Status area.

1. From the Home screen, tap Settings.

2. Tap the ON/OFF slider, located to the right of the Bluetooth field, to turn Bluetooth OFF.

The Bluetooth symbol displays when Bluetooth is active.

The Bluetooth symbol with connection lines displays when Bluetooth is connected (paired) and communicating.

The Bluetooth settings menu allows you to set up many of the characteristics of your device’s Bluetooth service, including:

• Entering or changing the name your device uses for Bluetooth communication and description

• Setting your device’s visibility (or “discoverability”) for other Bluetooth devices

• Displaying your device’s Bluetooth address

1. From the Home screen, tap Settings.

2. Verify your Bluetooth is ON.

3. Tap Bluetooth.

1. From the Bluetooth settings page, press the menu key, then press Device name.

2. Enter a new name.

3. Tap OK to complete the rename process.

1. From the Bluetooth settings page, press the menu key, then press Visible time-out.

• Making your device visible allows it to be detected by other devices for pairing and communication.

2. Select a time that you would like your device visibility to time-out.

Note: Your device is visible for up to 120 seconds (2 minutes). This value appears as a countdown within this field.

From the Bluetooth settings page, press the menu key, then press Show received files. A list of all files received from Bluetooth is displayed.

1. Verify your Bluetooth is active.

2. From the Bluetooth settings page, tap Scan for devices to search for visible external Bluetooth-compatible devices such as headsets, devices, printers, and computers.

1. Verify your Bluetooth is active.

2. Tap Scan for devices. Your device will display a list of discovered in-range Bluetooth devices.

3. Tap a device from the list to initiate pairing.

4. Enter the passkey or PIN code, if needed, and tap OK.

5. The external device will then have to also accept the connection and enter your device’s PIN code. Once successfully paired to an external device, the Bluetooth connected icon appears within the Status area.

Note: Due to different specifications and features of other Bluetooth-compatible devices, display and operations may be different, and functions such as transfer or exchange may not be possible with all Bluetooth compatible devices.

Note: Pairing between two Bluetooth devices is a one-time process. Once a pairing has been created, the devices will continue to recognize their partnership and exchange information without having to re-enter a passcode again.

1. Verify your Bluetooth is active.

2. From the Bluetooth settings page, tap the previously paired device (from the bottom of the page).

3. Tap OK to confirm disconnection.

– or –

From the Bluetooth settings page, touch and hold the name of the previously paired device, and select Disconnect.

Note: Disconnections are manually done but often occur automatically if the paired device goes out of range of your phone or it is powered off.

1. Verify your Bluetooth is active.

2. From the Bluetooth settings page, touch and hold the name of the previously paired device (from the bottom of the page). This opens the connected device’s menu options.

3. Tap Unpair to delete the paired device.

Note: Prior to using this feature, Bluetooth must first be enabled, and the recipient’s device must be visible.

1. Verify your Bluetooth is active.

2. From the Home screen, tap Contacts.

3. Press the menu key → Import/Export → Send namecard via.

4. Tap each contact that you would like to send via Bluetooth. A green checkmark will appear next to each entry you select.

5. Tap the checkmark icon.

6. Tap Bluetooth.

7. Select the paired device to send the contacts to.

Note: The external Bluetooth device must be visible and communicating for the pairing to be successful.

8. A Bluetooth share notification will appear in your notifications list.

You can connect your device to a PC using an optional PC data cable using various USB connection modes. When you connect the device to a PC, you can synchronize files with Windows Media Player, transfer data to and from your device directly, or use the Kies air application to access your PC wirelessly.

Note: The file directory of the memory card displays as a removable disk, separate from the internal memory.

1. Insert a memory card into the device to transfer files from or to the memory card to your PC.

2. From the Home screen, tap Settings → More… → USB utilities.

3. On your phone, tap Connect storage to PC.

4. Connect the multifunction jack on your device to a PC using a PC data cable.

5. A pop-up window displays on the PC when connected.

6. On your phone, tap Turn on USB storage.

7. Tap OK. Your phone will appear on your PC as a removable disk.

8. On the PC pop-up, click Open folder to view files.

9. Copy files between your PC and your memory card.

1. Sign onto the same Wi-Fi network from your phone and from your PC.

2. On your phone, from the Home screen, tap Kies air.

3. From the Kies air homescreen, tap Start. A web URL is displayed on your phone screen.

4. From your PC, enter the URL in your web browser.

5. On your phone, an Access Request prompt is displayed. Tap Allow to continue.

6. Tap the Remember for today checkbox if you will be using Kies air with the same PC later.

7. From your PC, a security warning may be displayed asking if you want to run this application. Click Run to continue.

8. On your PC, the Kies air screen is displayed. On your phone, the Kies air icon appears at the top of your screen.

9. Follow the on-screen instructions to view and share information between your phone and PC.

10. To exit the Kies air application, tap Stop on your phone, then close out the web browser on your PC.

Near Field Communication (NFC) may be available on this phone in the future, but is now temporarily disabled.

To open applications quickly, add the icons of frequently-used applications to one of the Home screens.

You can also add an application icon as a Primary Shortcut that will display on all Home screens. If you add an application as a primary shortcut, the application icon will not be displayed in the Applications menu.

1. Connect to a Wi-Fi network.

2. From the Home screen, tap AllShare. The AllShare screen is displayed.

3. To share media, tap Videos, Photos, or Music and tap on the media that you would like to share.

4. At the Select device screen, any devices that you can share with are displayed.

5. Tap on a device to share media.

6. Tap the Remote device tab at the top of the screen. All devices that you can receive media from are displayed.

7. Tap a device name. Media that you can receive from the other device is listed.

8. Tap an item that you want to stream to your phone.

9. Press Settings to configure the following settings:

• Device name: defaults to your phone. Use the keypad to enter a new Media server if desired, and tap Save.

• Share videos/photos/music: allows you to restrict what is shared from your phone. Tap the items you want to share.

• Upload from other devices: allows you set the phone to select how uploads from other devices are started. Tap Always accept, Always ask, or Always reject.

• Default memory: allows you to have media saved to your Phone or Memory Card. Tap an option.

• Subtitles: allows you to see subtitles on shared media.

Depending on the setting you changed, a pop-up screen may display to restart AllShare. Tap Yes to continue.

1. From the Home screen, tap the applications icon → Amazon Kindle.

2. At the Kindle display, tap Get Kindle for Android.

3. Sign on to your Google account.

4. Follow the on-screen instructions to download the application from Play Store.

1. From the Home screen, tap the applications icon → AT&T Code Scanner.

Note: The first time you use the AT&T Code Scanner, you will need to download the updated application from Play Store. When the Play Store page displays, tap Update.

2. Sign on to your Google account if you are not already signed on.

3. Read the Terms and Conditions and tap Accept to continue.

4. At the My Profile screen, tap OK to allow your location information to be used or tap Don’t Allow to bypass.

5. Enter your information in the My Profile section.

6. Tap ON to activate your profile. This allows the application to customize your results. For example, your zip code may help to deliver a coupon for a restaurant in your neighborhood. You can toggle the activation button between ON and OFF.

7. Tap Done.

8. Read the tutorial and tap Next until you are at the end of the tutorial. Tap Finish.

9. Position your phone approximately 2-5 inches from the barcode. Ensure that the barcode is completely within the window. Keep your phone steady for best results.

10. The scanner will automatically scan the barcode. It may take several seconds.

11. After the scan, tap Yes to open the web page to view the information on the barcode that was scanned.

1. From the Home screen, tap the applications icon → AT&T FamilyMap.

Note: The first time you use AT&T Family Map, you will need to download the application from Play Store.

2. At the AT&T FamilyMap Sign In webpage, enter your Phone Number and Password in the appropriate fields and tap Submit.

3. Follow the on-screen instructions.

Important! You must have a data plan to use this feature.

Note: These services require the purchase of a subscription.

1. From the Home screen, tap the applications icon → AT&T Navigator.

2. Read the Terms of Service and tap Accept to acknowledge the terms of use. The first time that you use AT&T Navigator, the necessary files will be downloaded. The AT&T Navigator main screen displays.

3. Tap an AT&T Navigator plan that you choose to purchase.

4. Follow the on-screen instructions.

1. From the Home screen, tap the applications icon → Calculator.

2. Enter the first number using the on-screen numeric keys.

3. Enter the operation for your calculation by tapping the corresponding on-screen arithmetic function key.

4. Enter the second number.

5. To view the result, tap equals (=).

6. To view calculator history, tap the history button located at the top of the calculator buttons. A history of your past calculations is displayed. Tap the history button again to display the calculator keypad.

7. To clear the calculator history, press the menu key → Clear history.

8. To change the text size, press the menu key → Text size. Tap Small, Medium, or Large.

1. From the Home screen, tap the applications icon → Calendar.

2. The following options are available:

• Month: the calendar displays the selected month with today’s date highlighted. At the bottom of the calendar, scheduled events display in the order that they occur.

• Week: the calendar displays the selected week with today’s time and date highlighted.

• Day: the calendar displays the selected day with any events highlighted.

• List: the Event List displays all events that you have added for all dates in the order that they appear.

From any Calendar view, press the Menu key to display the following options:

• Create event: allows you to create a new event for any day or time period.

• Go to: allows you to go to any date on your calendar.

• Today: takes you to today’s date, if you are not already there.

• Search: allows you to search through your calendar for a particular word or words.

• Delete: displays the event list, where you can select events to delete.

• Settings: displays the following calendar settings:

– Calendars: displays all calendars they you have created.

– Default view: allows you to set the default view to Month, Week, Day, or List.

– Day view: allows you to set the Day view to display with times listed or as a list of events. Select Time grid or Event List.

– First day of week: allows you to set the first day of the week to Sunday or Monday. This will affect how the Month view calendar is displayed.

– Hide declined events: will not display events you have received from others if you have declined them.

– Hide birthdays from Contacts: will not display the birthdays of your contacts.

– Lock time zone: allows you to lock the event times and dates to the time zone that you select.

– Select time zone: allows you to set the time zone to which event times and dates will be locked.

– Set alerts & notifications: allows you to turn on audio alerts, set Status bar notification, or turn alerts off.

– Vibration: allows you to set the Event notification tone to vibrate Always, Only in Silent mode or Never.

– Select ringtone: allows you to set the ringtone for the Event notification tone.

– Calendar sync: allows you to sync your calendar with other accounts such as email or social accounts.

1. From the Calendar, tap the List icon.

2. Tap any event to display it.

3. Press the Menu key to display the following options:

• Edit: allows you the change the Event name, date, time, location, participants, alarm, alarm details, and description. Tap Save.

• Delete: allows you to delete any event. Tap OK at the prompt.

• Send via: allows you to send event information via Bluetooth, Email, Messaging, or Wi-Fi Direct.

1. From the Home screen, tap the applications icon → Clock → Create alarm. The following options display:

• Time: tap the (+) or (-) to set the new time for the event, at which time an alarm will sound.

• Alarm repeat: use this option to set the repeating status for the alarm by tapping one of the following options:

– Weekly: sets the alarm to sound once every week on the day and time that is set.

– Daily: sets the alarm to sound all seven days of the week.

– Every weekday (Mon-Fri): sets the alarm to sound on all five weekdays.

– One-time event: sets the alarm to sound only once.

• Alarm type: sets the way in which the alarm sounds when activated (Melody, Vibration, Vibration and melody, and Briefing).

• Alarm volume: drag the slider to adjust the alarm’s volume.

• Alarm tone: sets the sound file which is played when the alarm is activated. Select Sounds or Go to My files.

• Snooze: use this option to set a Duration (3, 5, 10, 15, or 30 Minutes) and Snooze repeat (1, 2, 3, 5, or 10 Times).

• Smart alarm: tracks body movements and calculates the best time for sounding the alarm. Place the phone somewhere on your bed then the phone’s movement sensor (also known as accelerometer) is sensitive enough to work from any part of the bed. Set the Duration and the Tone.

• Name: allows you to use a specific name for the alarm. The name will appear on the display when the alarm activates.

2. Tap Save to store the alarm details.

To stop an alarm when it sounds, touch and sweep the X icon to the right.

To activate the Snooze feature after an alarm sounds, touch and sweep the Zz icon to the left. Snooze must first be set in the alarm settings.

1. From the Home screen, tap the applications icon → Clock → Alarm → Menu key → Delete.

2. Tap the alarm or alarms you wish to delete. A green checkmark will appear next to each selection.

3. Tap Delete.

1. From the Home screen, tap the applications icon → Clock → World clock. The clock for your time zone is displayed.

2. Tap Add city to add another city to the World Clock.

3. Scroll through the list of cities to find the city you want to add, or tap the Search bar and use the keypad to enter a city to search for.

4. Tap the city you want to add. The clock for that city will display.

5. To set Daylight Savings time, press and hold a city, then tap DST settings.

6. Select Automatic, Off, 1 hour, or 2 hours.

7. If Daylight Savings Time is selected, the sun symbol on the World Clock listing will appear orange.

1. From the Home screen, tap the applications icon → Clock → World clock → Menu key → Delete.

2. Tap the city clocks you wish to delete.

3. Tap Delete.

1. From the Home screen, tap the applications icon → Clock → Stopwatch.

2. Tap Start to start the stopwatch and tap Lap to mark a unit of time per lap.

3. Tap Stop to stop the stopwatch.

4. Tap Restart to continue or tap Reset to erase all times recorded.

1. From the Home screen, tap the applications icon → Clock → Timer.

2. The min field is highlighted and set to 1 minute. Use the keypad to set the number of minutes you want.

3. Tap the hr field to set hours if desired. As you tap different fields, they will become highlighted.

4. Tap the sec field to set seconds.

5. Tap Start to begin the timer and tap Stop to pause the timer.

6. After stopping, tap Restart to continue or tap Reset to set the timer back to the original setting.

1. From the Home screen, tap the applications icon → Downloads. All of your downloads are listed.

2. Tap the Internet downloads tab to see all of the downloads you have made from the Browser.

3. Tap the Other downloads tab to see all other downloads.

4. Tap Sort by size to see your downloads sorted in size order.

5. Tap Sort by date to see your downloads sorted in date order.

1. From the Home screen, tap the applications icon → Facebook.

2. If you already have a Facebook account, tap on the Email and Password fields and enter your information using the on-screen keyboard, then tap Login.

– or –

If you don’t have a Facebook account, tap Sign up and follow the on-screen instructions.

1. Sign on to your Google account.

2. From the Home screen, tap the applications icon → Latitude. Your location is displayed on the map, accurate to 30 meters.

1. From the Latitude map screen, tap FRIENDS LIST to display your Latitude friends. At first, only your name is displayed.

2. Tap the add friends icon.

3. Tap Select from Contacts or Add via email address.

4. Tap a contact or enter an email address and tap Add friends.

5. At the Send sharing requests prompt, tap Yes. Your friend will receive an email or text message with your location marked on a map. They will also receive instructions on how to view your location from the web or use Latitude on their phone or tablet provided it is available. Once they acknowledge your request, their location will display on your phone. They can share their location from their computer, phone, or tablet.

6. To view the map, tap MAP VIEW.

From the map display, press the Menu key to display the following options:

• Clear Map: allows you to remove all markings and layers from the map.

• Search: allows you to search for a place of interest.

• Directions: displays navigation directions to a location from a starting point.

• Layers: Layers are additional items that you can have displayed on your map. They include Traffic, Satellite, Terrain, Transit Lines, Latitude, My Maps, Bicycling, and Wikipedia.

• Settings: displays the Google Mobile Help web page where you can receive help on Google Maps.

– Cache Settings: allows you to set options to pre-fetch map tiles when not using WiFi and to clear the cache that holds the map tiles.

– Location settings: allows you to manage the settings for your Background location reporting, Location history, Latitude location sharing, and Check-ins.

– Labs: this is a testing ground for experimental features that aren’t ready for primetime. They may change, break or disappear at any time. Click on a Lab to enable or disable it.

– Terms, Privacy & Notices: displays the Terms and Conditions, Privacy Policy, or Legal Notices information. Select the desired information from the pop-up menu.

– Feedback: allows you to send feedback to Google.

– About: displays general information about Google maps such as Version, Platform, Locale, Total data sent, Total data received, Free memory, etc.

• Help: displays the Google Mobile Help web page where you can receive help on Google Maps.

Important! Before using Google Maps you must have an active data (3G) connection. The Maps application does not cover every country or city.

1. From the Home screen, tap Settings → Location services.

2. Tap the GPS satellites field. A green checkmark will display next to the field.

Note: Selecting GPS satellites allows you to locate places of interest at the street-level. However, this also requires a clear view of the sky and uses more battery power.

To receive better GPS signals, avoid using your device in the following conditions:

• inside a building or between buildings

• in a tunnel or underground passage

• in poor weather

• around high-voltage or electromagnetic fields

• in a vehicle with tinted windows

1. From the Home screen, tap the applications icon → Maps. A map will display with your location in the very center.

2. Icons for the following options are displayed at the bottom of the screen:

• Search icon: allows you to search for a place of interest.

• Directions icon: displays navigation directions to a location from a starting point.

• Places icon: find Restaurants, Cafes, Bars, Attractions, and other businesses.

• Layers icon: additional items that you can have displayed on your map. They include Traffic, Satellite, Terrain, Transit Lines, Latitude, My Maps, Bicycling, and Wikipedia.

3. Press the Menu key to display the following options:

• Clear Map: allows you to remove all markings and layers from the map.

• Settings: displays the Google Mobile Help web page where you can receive help on Google Maps.

– Cache settings: allows you to set options to pre-fetch map tiles when not using WiFi and to clear the cache that holds the map tiles.

– Location settings: allows you to manage the settings for your Background location reporting, Location history, Latitude location sharing, and Check-ins.

– Labs: this is a testing ground for experimental features that aren’t ready for primetime. They may change, break or disappear at any time. Click on a Lab to enable or disable it.

– Terms, Privacy & Notices: displays the Terms and Conditions, Privacy Policy, or Legal Notices information. Select the desired information from the pop-up menu.

– Feedback: allows you to send feedback to Google.

– About: displays general information about Google maps such as Version, Platform, Locale, Total data sent, Total data received, Free memory, etc.

• Help: displays the Google Mobile Help web page where you can receive help on Google Maps.

1. From the Home screen, tap the applications icon → Memo.

2. To create a new memo, tap Create memo.

– or –

Press the Menu key → Create.

3. Type your Memo using the keypad and tap Save. The memo will display in the memo list.

4. To send a Memo, touch and hold the Memo in the Memo list.

5. Tap Send.

6. Tap Bluetooth, Email, Messaging, or Wi-Fi Direct.

7. Enter the recipient information and tap Send.

8. To modify a Memo, tap the pencil icon in the top right corner of the Memo. Edit the Memo then tap Save.

9. From the Memo list, press the Menu key to display the following options:

• Create: allows you to create a new memo.

• Delete: allows you to delete one or all of your memos.

• Search: allows you to search your memos for a particular word or words.

• Send: allows you to send one or several of your memos at one time. You can send via Bluetooth, Email, Messaging, or Wi-Fi.

• Sort by: allows you to sort by Date or Color.

• SNS log-in: allows you to log into your Facebook, Twitter, Myspace, or LinkedIn accounts.

• Sync memo: allows you to sync your memos Google Docs or send individual memos.

• PIN lock: allows you to set a PIN lock so that a PIN must be entered before reading a memo.

1. From the Home screen, tap the applications icon → Mini Diary.

2. Tap Create diary to start a new diary entry.

3. Tap the Tap to add photo field to add a photo.

4. To take a new picture, tap Camera. To add a photo from your Gallery, tap Gallery.

5. Tap the Tap to add text field to add text to your diary then tap Done.

6. Use the on-screen keypad to enter a memo then tap Done.

7. Tap the Add location field to add your location then tap Done.

8. Tap Save.

9. The diary entry will be added to your Mini Diary with today’s date.

10. While in a diary entry that has been previously saved, press the Menu key to display the following options:

• Create: allows you to create a new diary entry.

For a previously saved diary entry, menu options include:

• Delete: allows you to delete a diary entry.

• Go to: allows you to go to a selected date on the Calendar.

• Change photo: allows you to change your photo if you have already added one. This option only displays if a photo has been added.

• Delete photo: allows you to delete your photo. This option only displays if a photo has been added.

• Publish: allows you to publish your diary to Facebook.

• Send via: allows you to send your Diary entry by Email or Messaging.

11. At the Mini Diary screen, press the Menu key to display the following options:

• Search: allows you to search your diaries for a particular word or words.

• List by: allows you to sort by Date or Location.

• Delete all: allows you to delete all diary entries.

• Settings: allows you to select Auto update which will update your Selected city based on GPS.

1. From the Home screen, tap Settings → Security → Unknown sources. You are now allowed to download non-Market applications.

2. From the Home screen, tap the applications icon → Movies.

3. Read the Terms of Service, then tap the I accept the mSpot Terms of Service checkbox.

4. Enter your birth date, and tap OK.

5. At the Movies download screen, select the desired movie and tap Rent.

6. Follow the on-screen instructions to rent the movie.

1. From the Home screen, tap the applications icon → My Files.

2. The following folders display:

• DCIM: this is the default location for pictures and videos taken by the device. Tap DCIM → Camera to view the picture or video files.

• Android: the Android folder stores files that are used in Android applications.

• external_sd: this folder displays all of the files that you have on your memory card.

• bluetooth: this folder stores files sent via a Bluetooth device.

Note: Different folders may appear depending on how your phone is configured.

Note: The first time you use myAT&T, you will need to download the updated application from Play Store. When the Play Store page displays, tap Update or Install then follow the on-screen instructions.

1. From the Home screen, tap the applications icon → myAT&T.

2. Sign into your Google Account. If you haven’t set up an account, create one.

3. After signing into your Google Account, Play Store displays the myAT&T application.

4. Follow the on-screen instructions to update the app.

1. From the Home screen, tap the applications icon → myAT&T. The myAT&T page is displayed.

2. Read the Terms and Conditions and tap Accept to continue.

3. Enter your User ID and Password using the on-screen keypad, then tap Login.

Note: For User ID, you can use your wireless phone number, U-verse Member ID, Home Phone & DSL username, or your AT&T Access ID.

4. Follow the on-screen instructions.

Note: For voice-guided navigation, you need to install text-to-speech support from Play Store.

To receive better GPS signals, avoid using your device in the following conditions:

• inside a building or between buildings

• in a tunnel or underground passage

• in poor weather

• around high-voltage or electromagnetic fields

• in a vehicle with tinted windows

1. From the Home screen, tap the applications icon → Navigation.

2. Read the Navigation information page and tap Accept to continue or Don’t accept to exit.

3. Select one of the following options:

• Speak destination: allows you to speak your destination.

• Type destination: allows you to use the keypad to enter your destination.

• Contacts: displays a list of all of your contacts that have addresses listed.

• Starred places: allows you to keep a list of favorite destinations, locations, restaurants, etc. Just tap a starred item to get directions.

• Recent destinations: allows you to access information on previous destinations you have used. This option only appears after you have entered one or more destinations.

Press the Menu key for the following options:

• Exit navigation: exits the Navigation application and returns you to the Application Menu screen.

• Route info: displays your route on a map.

• Set destination: displays the Choose Destination screen where you can speak or type your destination.

• Search: allows you to speak or type a destination, place, or service to search for.

• Layers: are additional items that you can have displayed on your map. They include:

– Traffic view: displays real-time traffic conditions so you can plan the fastest route.

– Satellite: allows you to see you the map as a satellite image.

– Parking: allows you to see registered parking areas.

– Gas stations: allows you to see registered gas stations.

– ATMs & banks: allows you to see registered ATMs and Banks.

– Restaurants: allows you to see registered restaurants.

• Directions list: displays the written directions on how to arrive at your destination.

• Help: takes you to the Google Mobile Help web page.

• Settings: includes the following options:

– Screen dimming: set this option to dim the screen between instructions in order to conserve battery power.

– Terms, privacy & notices: displays Terms and Conditions for Google mobile products, the Google Privacy Policy, and Google legal notices.

1. From the Home screen, tap the applications icon → Navigation.

2. Tap either Speak Destination or Type Destination.

3. If typing in the address, enter the address, City, and State using the keypad. As you type, possible addresses will be displayed. Tap on one when you see the address you want. The route will be displayed.

4. If speaking the address, the Voice guidance screen is displayed. For voice-guided navigation you need to install text-to-speech support from Play Store. Tap Install to install the application or tap Skip to exit.

Note: You will need to be signed on to your Google account before downloading applications from Play Store.

5. As you drive the route display will be updated and you will receive voice-guided navigation directions.

1. From the Home screen, tap the applications icon → News & Weather. The Weather screen is displayed with current temperature, conditions, Humidity, and Wind speed.

2. Tap the temperature to display a graph mapping the days temperature and humidity.

3. While on the Weather screen, press the Menu key to display the following options:

• Refresh: allows you to refresh the screen. Your location and the weather is updated if there have been any changes.

• Settings: allows you to set weather, news, and refresh settings.

– Weather settings: allows you to choose location(s) and set the metric for temperature displays.

– News settings: allows you to choose topics, configure settings for fetching articles and images, and view the terms of service for news service.

– Refresh settings: allows you to choose options for updating content.

– Application version: displays the application version number.

4. To view the news, sweep the screen to the left to display TOP STORIES, U.S., SPORTS, and ENTERTAINMENT.

1. From the Home screen, tap the applications icon → Places.

2. Tap on one of the business categories to search for a particular business. All of the business categories that are close to you will be displayed.

3. Tap on a business that you want to see the details for.

4. The business details such as address, phone, website, and location are displayed. You can also see reviews from around the web and from Google users.

1. From the Home screen, tap the applications icon → Play Books.

2. Sign on to your Google account.

3. Follow the on-screen instructions for using the Play Books application.

1. From the main Home screen, tap Play Store.

2. Sign on to your Google account.

3. The first time you sign in, Play Store Terms of Service will be displayed. Tap Accept to continue or Decline to exit.

4. Tap Apps, Games, or AT&T to download or purchase games or applications. You can also download updates to existing applications.

5. Follow on the on-screen instructions.

Note: To use any downloaded Play Store application that requires a USB connection between your phone and your PC, you should first set the USB utilities setting to Connect storage to PC.

1. From the Home screen, tap the applications icon → Quickoffice.

2. The first time you use the Quickoffice application, read the License information and tap I Accept to continue.

3. Tap the E-mail Address field, then use the keypad to enter your E-mail address.

4. Tap Register Now.

– or –

Tap Register Later.

The Quickoffice screen is displayed.

5. The following Quickoffice applications are available:

• Quickword: allows you to create and save Word documents on your phone. you can also access Word documents from your SD card and your Recent Documents folder.

• Quicksheet: allows you to create and save Excel spreadsheet documents.

• Quickpoint: allows you to view existing Powerpoint documents from your SD card and your Recent Documents folder.

• QuickPDF: allows you to view existing PDF documents from your SD card and your Recent Documents folder.

6. Select an option and follow the on-screen instructions.

1. From the Home screen, tap the applications icon → Social Hub. The Social Hub Welcome page describes all of the available features.

2. To setup your Social Hub account, tap Set up now.

3. Tap on the Social Hub account type that you would like to setup.

4. Read the SNS disclaimer, tap the I accept all the terms above checkbox, then tap Agree to continue.

5. Tap Next.

6. Follow the on-screen instructions for adding an account.

7. From the Social Hub main screen, tap the Feeds or Messages tabs to see information pertaining to your account.

8. To add another account, press the Menu key → Accounts then tap Add account.

9. To refresh your status, press the Menu key → Refresh.

1. From the Home screen, tap the applications icon → Task.

2. Tap Create task to start a new task entry.

3. Tap the Name field and enter a task name using the keypad.

4. Tap the Due date field and enter a due date name using the keypad. If there is no date that the task is due, tap the No due date checkbox.

5. If desired, enter Task, Priority, Reminder, and Notes then tap Save.

6. At the Task list screen, press the Menu key to display the following options:

• Create task: allows you to create a new task.

• Delete: allows you to delete one or all of your tasks.

• Search: allows you to search your tasks for a particular word or words.

• List by: allows you to sort by Due date, Status, or Priority.

• Sync task: allows you to sync your tasks to any of your accounts.

7. From the Task list screen, tap a task once you have completed it and a checkmark appears next to the task. The task name is also grayed out so that you can still read it.

1. From the Home screen, tap the applications icon → Task manager.

2. The Task Manager options are located at the top of the screen. The following options are available:

• Active applications: displays all of the applications that are presently running on your phone. Tap Exit to end an application, or tap Exit all to end all running applications.

• Downloaded: displays the size of your downloaded application programs.

• RAM: displays the Random Access Memory (RAM) and allows you to clear different levels of RAM.

• Storage: displays a summary of the phone’s storage.

• Help: displays information on how to extend battery life.

1. From the Home screen, tap the applications icon → Voice command.

2. Read the Samsung Disclaimer then tap Confirm to continue.

3. Read the Vlingo Terms of Service then tap Agree to continue.

4. Read the information on the How to Use Samsung voice screen, then tap Confirm.

5. Read the information on the Help screen and tap Finish.

6. At the Voice talk screen, tap on an icon for assistance in using Voice command or tap Tap & Speak to speak what you would like to do.

7. Follow the on-screen instructions.

8. For more information, press the Menu key → Help.

1. From the Home screen, tap the applications icon → Voice Recorder.

2. To start recording, tap Record and speak into the microphone.

3. During the recording process you can either tap Stop to stop and save the recording or Pause to temporarily halt the recording. After pausing, tap Record to resume recording. Once the audio recording has stopped, the message is automatically saved. Tap Cancel to cancel the recording without saving.

4. Tap List to display a list of all your voice recordings. Tap a voice recording to play it.

5. Press the Menu key to display the following options:

• Share: allows you to share your recording using Bluetooth, Email, Gmail, Messaging, or Wi-Fi Direct.

• Delete: allows you to delete 1 or more voice recordings. Tap the recordings to delete and tap Done.

• Rename: allows you to rename your recordings.

• Settings: the following settings are available:

– Storage: allows you to choose where your recordings will be saved. Select between Phone or memory card.

– Default name: allows you to choose the name prefix for your recordings. For example, if your Default name is Voice, your recordings would be named Voice 001, Voice 002, Voice 003, etc.

– Recording quality: allows you to set the recording quality to High or Normal.

– Limit for MMS: allows you to select On or Off. If you Limit for MMS by selecting On, you will be assured that the recording can be sent in a message.

1. From the Home screen, tap the applications icon → Voice talk.

2. Read the Samsung Disclaimer then tap Confirm to continue.

3. Read the Vlingo Terms of Service then tap Agree to continue.

4. Read the information on the How to use Samsung voice screen, then tap Next.

5. Read the information on the Wake up Voice talk screen, then tap Next.

6. Read the information on the What can I say? screen, then tap Done.

7. At the Voice talk screen, tap on an icon for assistance in using Voice command or tap Tap & Speak to speak what you would like to do.

8. Follow the on-screen instructions.

Note: The first time you use Words Free, you will need to download the updated application from Play Store. When the Play Store page displays, tap Update or Install then follow the on-screen instructions.

1. From the Home screen, tap the applications icon → Words Free.

2. Sign on to your Google account if you have not already done so.

3. Tap Login with Facebook or Login with Email Address.

4. Enter your email address and tap Connect!.

5. Enter a preferred Username and tap OK.

6. Tap the + icon to create a new game and follow the on-screen instructions.

Note: YouTube is a data-intensive feature. It is recommended that you upgrade to a large data plan to avoid additional data charges.

1. From the Home screen, tap the applications icon → YouTube.

2. Tap the search field (magnifying glass icon) to search for specific videos, scroll down to browse through the main page thumbnails, or scroll to the bottom to explore additional options.

3. To view a video, tap an available preview thumbnail or tap the title link.

4. If you prefer high quality video, as the video starts to play, tap HQ.

5. Tap the camcorder icon to go to your camcorder so you can take your own videos.

Note: It is not necessary to sign in to the YouTube site to view content. However, if you wish to sign in to access additional options, access the page via the Web browser and tap Sign in at the top right corner, enter your YouTube or Google username and password, and tap Sign in.

Note: The first time you use YP, you will need to download the updated application from Play Store. When the Play Store page displays, tap Update or Install then follow the on-screen instructions.

1. From the Home screen, tap the applications icon → YP.

2. Sign on to your Google account if you have not already done so.

3. Read the End-User License Agreement (EULA) and tap Accept to continue.

4. Read the introduction information and tap Continue.

5. Your location is found using GPS. Tap OK to allow YP to use your current location.

6. Tap the Find a business nearby! field.

7. Enter information in the What: and Near: fields and tap Search.

8. Results will be displayed.

9. Tap the map icon to see the locations marked with pins on the map.

10. Pinch the map screen inwards to zoom out or pinch it outwards to zoom in.

11. Tap a pin to read information about the location.

12. Tap the Menu key to display additional options.

If you consider a call necessary and appropriate, follow these tips:

• Use a hands-free device;

• Secure your phone within easy reach;

• Place calls when you are not moving;

• Plan calls when your car will be stationary;

• Do not engage in stressful or emotional conversations;

• Let the person with whom you are speaking know that you are driving and will suspend the call if necessary;

• Do not take notes or look up phone numbers while driving;

• Do not disassemble, crush, puncture, shred, or otherwise attempt to change the form of your battery. Do not put a high degree of pressure on the battery. This can cause leakage or an internal short-circuit, resulting in overheating.

• Do not let the phone or battery come in contact with liquids. Liquids can get into the phone’s circuits, leading to corrosion. Even when the phone appears to be dry and appears to operate normally, the circuitry could slowly corrode and pose a safety hazard. If the phone and/or battery get wet, have them checked by your service provider or contact Samsung, even if they appear to be working properly.

• Do not place your battery in or near a heat source. Excessive heating can damage the phone or the battery and could cause the phone or the battery to explode. Do not dry a wet or damp battery with an appliance or heat source such as a microwave oven, hair dryer, iron, or radiator. Avoid leaving your phone in your car in high temperatures.

• Do not dispose of the phone or the battery in a fire. The phone or the battery may explode when overheated.

• Do not handle a damaged or leaking battery. Do not let leaking battery fluid come in contact with your eyes, skin or clothing. For safe disposal options, contact your nearest Samsung-authorized service center.

• Avoid dropping the cell phone. Dropping the phone or the battery, especially on a hard surface, can potentially cause damage to the phone and battery. If you suspect damage to the phone or battery, take it to a service center for inspection.

• Never use any charger or battery that is damaged in any way.

• Do not allow the battery to touch metal objects. Accidental short-circuiting can occur when a metallic object (coin, key, jewelry, clip, or pen) causes a direct connection between the + and – terminals of the battery (metal strips on the battery), for example when you carry a spare battery in a pocket or bag. Short-circuiting the terminals may damage the battery or the object causing the short-circuiting.

Important! Use only Samsung-approved batteries, and recharge your battery only with Samsung-approved chargers which are specifically designed for your phone.