RICOH PJ WX5350N (01) PDF MANUAL


Post questions, comments, reviews or page errors in the comment box below.

Your File is Ready … Download PDF

CLICK HERE TO DOWNLOAD RICOH PJ WX5350N (01) PDF MANUAL


PDF Content Summary: User’s Manual Read this manual carefully before you use this machine and keep it handy for future reference. For safe and correct use, be sure to read the Important Information in this manual before using the machine. • Macintosh, Mac OS X and PowerBook are trademarks of Apple Inc. registered in the U.S. and other countries. • Microsoft, Windows, Windows Vista, Internet Explorer, .NET Framework and PowerPoint are either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. • MicroSaver is a registered trademark of Kensington Computer Products Group, a division of ACCO Brands. • HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. • Trademark PJLink is a trademark applied for trademark rights in Japan, the United States of America and other countries and areas. • Wi-Fi®, Wi-Fi Alliance®, and Wi-Fi Protected Access (WPA, WPA2)® are registered trademarks of the Wi-Fi Alliance. • Blu-ray is a trademark of Blu-ray Disc Association • Crestron, Crestron Control, and Crestron RoomView are trademarks or registered trademarks of Crestron Electron ics, Inc. • Other product and company names mentioned in this user’s manual may be the trademarks or registered trademarks of their respective holders. • GPL/LGPL Software Licenses The product includes software licensed under GNU General Public License (GPL), GNU Lesser General Public License (LGPL), and others. For more information on each software, see “readme.pdf”inside the “about GPL&LGPL”folder on the supplied Source Code CD-ROM. NOTES (1) The contents of this user’s manual may not be reprinted in part or whole without permission. (2) The contents of this user’s manual are subject to change without notice. (3) Great care has been taken in the preparation of this user’s manual; however, should you notice any questionable points, errors or omissions, please contact us. (4) Notwithstanding article (3), Ricoh will not be responsible for any claims on loss of profit or other matters deemed to result from using the Projector. Important Information Safety Cautions Precautions Please read this manual carefully before using your Ricoh projector and keep the manual handy for future reference. CAUTION To turn off main power, be sure to remove the plug from power outlet. The power outlet socket should be installed as near to the equipment as possible, and should be easily accessible. CAUTION TO PREVENT SHOCK, DO NOT OPEN THE CABINET. THERE ARE HIGH-VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol warns the user that uninsulated voltage within the unit may be sufficient to cause electrical shock. Therefore, it is dangerous to make any kind of contact with any part inside of the unit. This symbol alerts the user that important information concerning the operation and maintenance of this unit has been provided. The information should be read carefully to avoid problems. WARNING: TO PREVENT FIRE OR SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. DO NOT USETHIS UNIT’S PLUG WITH AN EXTENSION CORD OR IN AN OUTLET UNLESSALL THE PRONGS CAN BE FULLY INSERTED. DOC Compliance Notice (for Canada only) This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Machine Noise Information Regulation - 3. GPSGV, The highest sound pressure level is less than 70 dB (A) in accordance with EN ISO 7779. CAUTION Avoid displaying stationary images for a prolonged period of time. Doing so can result in these images being temporarily sustained on the surface of the LCD panel. If this should happen, continue to use your projector. The static background from previous images will disappear. User Information on Electrical and Electronic Equipment Users in the countries where this symbol shown in this section has been specified in national law on collection and treatment of E-waste Our Products contain high quality components and are designed to facilitate recycling. Our products or product packaging are marked with the symbol below. i Important Information The symbol indicates that the product must not be treated as municipal waste. It must be disposed of separately via the appropriate return and collection systems available. By following these instructions you ensure that this product is treated correctly and help to reduce potential impacts on the environment and human health, which could otherwise result from inappropriate handling. Recycling of products helps to conserve natural resources and protect the environment. For more detailed information on collection and recycling systems for this product, please contact the shop where you purchased it, your local dealer or sales/service representatives. All Other Users If you wish to discard this product, please contact your local authorities, the shop where you bought this product, your local dealer or sales/service representatives. Note for the Battery and/or Accumulator Symbol (For EU countries only) In accordance with the Battery Directive 2006/66/EC Article 20 Information for end-users Annex II, the above symbol is printed on batteries and accumulators. This symbol means that in the European Union, used batteries and accumulators should be disposed of separately from your household waste. In the EU, there are separate collection systems for not only used electrical and electronic products but also batteries and accumulators. Please dispose of them correctly at your local community waste collection/recycling centre. WARNING TO CALIFORNIA RESIDENTS: Handling the cables supplied with this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. WASH HANDS AFTER HANDLING. RF Interference (for USA only) WARNING The Federal Communications Commission does not allow any modifications or changes to the unit EXCEPT those specified by RicohAmericas Corporation in this manual.Failure to comply with this government regulation could void your right to operate this equipment.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio / TV technician for help. For UK only: In UK, a BS approved power cord with moulded plug has a Black (five Amps) fuse installed for use with this equipment. If a power cord is not supplied with this equipment please contact your supplier. ii Important Information Important Safeguards These safety instructions are to ensure the long life of your projector and to prevent fire and shock. Please read them carefully and heed all warnings. Installation • Do not place the projector in the following conditions: - on an unstable cart, stand, or table. - near water, baths, or damp rooms. - in direct sunlight, near heaters, or heat radiating appliances. - in a dusty, smoky or steamy environment. - on a sheet of paper or cloth, rugs or carpets. • If you wish to have the projector installed on the ceiling: - Do not attempt to install the projector yourself. - The projector must be installed by qualified technicians in order to ensure proper operation and reduce the risk of bodily injury. - In addition, the ceiling must be strong enough to support the projector and the installation must be in accordance with any local building codes. - Please consult your dealer for more information. WARNING • Do not use any other object than the projector’s sliding lens cover to cover the lens while the projector is on. Doing so can cause the object to get extremely hot, and possibly resulting in a fire or damage due to the heat emitted from the light output. Place the projector in a horizontal position The tilt angle of the projector should not exceed 10 degrees, nor should the projector be installed in any way other than the desktop and ceiling mount, otherwise lamp life could decrease dramatically. 10° iii Important Information Fire and Shock Precautions • Ensure that there is sufficient ventilation and that vents are unobstructed to prevent the build-up of heat inside your projector. Allow at least 4 inches (10cm) of space between your projector and a wall. • Do not try to touch the ventilation outlet on the left front (when seen from the front) as it can become heated while the projector is turned on and immediately after the projector is turned off. Parts of the projector may become tem porarily heated if the projector is turned off with the Power button or if the AC power supply is disconnected during normal projector operation. Use caution when picking up the projector. • Prevent foreign objects such as paper clips and bits of paper from falling into your projector. Do not attempt to retrieve any objects that might fall into your projector. Do not insert any metal objects such as a wire or screwdriver into your projector. If something should fall into your projector, disconnect it immediately and have the object removed by a qualified service personnel. • Do not place any objects on top of the projector. • Do not touch the power plug during a thunderstorm. Doing so can cause electrical shock or fire. • The projector is designed to operate on a power supply of 100-240V AC 50/60 Hz. Ensure that your power supply fits this requirement before attempting to use your projector. • Do not look into the lens while the projector is on. Serious damage to your eyes could result. • Keep any items (magnifying glass etc.) out of the light path of the projector. The light path being projected from the lens is extensive, therefore any kind of abnormal objects that can redirect light coming out of the lens, can cause an unpredictable outcome such as a fire or injury to the eyes. • Do not place any objects, which are easily affected by heat, in front of a projector exhaust vent. Doing so could lead to the object melting or getting your hands burned from the heat that is emitted from the exhaust. • Handle the power cord carefully. A damaged or frayed power cord can cause electric shock or fire. - Do not use any power cord other than the one supplied with the projector. - Do not bend or tug the power cord excessively. - Do not place the power cord under the projector, or any heavy object. - Do not cover the power cord with other soft materials such as rugs. - Do not heat the power cord. - Do not handle the power plug with wet hands. • Turn off the projector, unplug the power cord and have the projector serviced by a qualified service personnel under the following conditions: - When the power cord or plug is damaged or frayed. - If liquid has been spilled into the projector, or if it has been exposed to rain or water. - If the projector does not operate normally when you follow the instructions described in this user’s manual. - If the projector has been dropped or the cabinet has been damaged. - If the projector exhibits a distinct change in performance, indicating a need for service. • Disconnect the power cord and any other cables before carrying the projector. • Turn off the projector and unplug the power cord before cleaning the cabinet or replacing the lamp. • Turn off the projector and unplug the power cord if the projector is not to be used for an extended period of time. • When using a LAN cable (only models with the RJ-45 LAN port): For safety, do not connect to the connector for peripheral device wiring that might have excessive voltage. iv Important Information CAUTION • Do not use the tilt-foot for purposes other than originally intended. Misuses such as gripping the tilt-foot or hang ing on the wall can cause damage to the projector. • Do not send the projector in the soft case by parcel delivery service or cargo shipment. The projector inside the soft case could be damaged. • Select [HIGH] in Fan mode if you continue to use the projector for consecutive days. (From the menu, select [SETUP] → [OPTIONS(1)] → [FAN MODE] → [HIGH].) • Do not try to touch the ventilation outlet on the left front (when seen from the front) as it can become heated while the projector is turned on and immediately after the projector is turned off. • Do not turn off the AC power for 60 seconds after the lamp is turned on and while the Power indicator is blinking blue. Doing so could cause premature lamp failure. Remote Control Precautions • Handle the remote control carefully. • If the remote control gets wet, wipe it dry immediately. • Avoid excessive heat and humidity. • Do not short, heat, or take apart batteries. • Do not throw batteries into fire. • If you will not be using the remote control for a long time, remove the batteries. • Ensure that you have the batteries’ polarity (+/−) aligned correctly. • Do not use new and old batteries together, or use different types of batteries together. • Dispose of used batteries according to your local regulations. Note for US Residents The lamp in this product contains mercury. Please dispose according to Local, State or Federal Laws. Lamp Replacement • Use the specified lamp for safety and performance. • To replace the lamp, follow all instructions provided on page 146. • Be sure to replace the lamp and filter when the message [THE LAMP HAS REACHED THE END OF ITS USABLE LIFE. PLEASE REPLACE THE LAMP AND FILTER.] appears. If you continue to use the lamp after the lamp has reached the end of its usable life, the lamp bulb may shatter, and pieces of glass may be scattered in the lamp case. Do not touch them as the pieces of glass may cause injury. If this happens, contact your dealer for lamp replacement. A Lamp Characteristic The projector has a high-pressure mercury lamp as a light source. A lamp has a characteristic that its brightness gradually decreases with age. Also repeatedly turning the lamp on and off will increase the possibility of its lower brightness. CAUTION: • DO NOT TOUCH THE LAMP immediately after it has been used. It will be extremely hot. Turn the projector off and then disconnect the power cord. Allow at least one hour for the lamp to cool before handling. • When removing the lamp from a ceiling-mounted projector, make sure that no one is under the projector. Glass fragments could fall if the lamp has been burned out. v Important Information About High Altitude mode • Set [FAN MODE] to [HIGH ALTITUDE] when using the projector at altitudes approximately 5500 feet/1600 meters or higher. Using the projector at altitudes approximately 5500 feet/1600 meters or higher without setting to [HIGH ALTITUDE] can cause the projector to overheat and the protector could shut down. If this happens, wait a couple minutes and turn on the projector. • Using the projector at altitudes less than approximately 5500 feet/1600 meters and setting to [HIGH ALTITUDE] can cause the lamp to overcool, causing the image to flicker. Switch [FAN MODE] to [AUTO]. • Using the projector at altitudes approximately 5500 feet/1600 meters or higher can shorten the life of optical com ponents such as the lamp. About Copyright of original projected pictures: Please note that using this projector for the purpose of commercial gain or the attraction of public attention in a venue such as a coffee shop or hotel and employing compression or expansion of the screen image with the following func tions may raise concern about the infringement of copyrights which are protected by copyright law. [ASPECT], [KEYSTONE], Magnifying feature and other similar features. Turkish RoHS information relevant for Turkish market EEE Yonetmeliğine Uygundur. This device is not intended for use in the direct field of view at visual display workplaces.To avoid incommoding reflec tions at visual display workplaces this device must not be placed in the direct field of view. • FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B Personal Computer and Peripheral, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. This equipment has been tested to comply with the limits for a Class B personal computer and periph-eral, pursuant to Subpart B of Part 15 of FCC Rules. Only peripherals (computer input/output devices, terminals, printers, etc.) certi fied (DoC) or verified to comply with Class B limits may be attached to this equipment. Operation with non-certified (DoC) or non-verified personal computer and/or peripherals is likely to result in Interference to radio and TV reception. The connection of a unshielded equipment interface cable to this equipment will invalidate the FCC Certification of this device and may cause interference levels which Exceed the limits established by FCC for equipment. You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. vi Important Information Regulatory Information/Disclaimers Installation and use of this Wireless LAN device must be in strict accordance with the instructions included in the user documentation provided with the product. Any changes or modifications (including the antennas) made to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment. The manufacturer is not responsible for any radio or television interference caused by unauthorized modification of this device, or the substitution of the connecting cables and equipment other than manufacturer specified. It is the responsibility of the user to correct any interference caused by such unauthorized modification, substitution or attach ment. Manufacturer and its authorized resellers or distributors will assume no liability for any damage or violation of government regulations arising from failing to comply with these guidelines. IEEE 802.11b or 802.11g operation of this product in the U.S.A. is firmware-limited to channels 1 through 11. CAUTION This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must be installed to provide a separation distance of at least 7.87"/20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This Class B digital apparatus complies with Canadian RSS-210. Cet appareil numerique de la Classe B est conforme a la norme CNR-210 du Canada. Industry Canada Statement This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: 1) this device may not cause interference and 2) this device must accept any interference, including interference that may cause undesired operation of the device Regulatory Statement: Operation of this device is subjected to the following National regulations and may be prohibited to use if certain restriction should be applied. France: Outdoor use limited to 10mW e.i.r.p. within the band 2454 – 2483.5 MHz. Derogation in French overseas departments of Guyane and La Reunion: outdoor use not allowed in band 2400 - 2420 MHz. vii Important Information Safety Labels of This Machine 1 Do not look into the lens while the projector is on. Serious damage to your eyes could result. Do not use any other object than the projector's sliding lens cover to cover the lens while the projector is on. Doing so can cause the object to get extremely hot, and possibly resulting in a fire or damage due to the heat emitted from the light output. 2 Donottry totouchtheventilationoutletontheleftfront(whenseenfromthefront)as it canbecomeheatedwhiletheprojec toris turnedonandimmediatelyaftertheprojectoris turnedoff.Partsoftheprojectormaybecometemporarilyheatedifthe projector is turned off with the Power button or if theAC power supply is disconnected during normal projector operation. Use caution when picking up the projector. 3 Do not remove any screws except the lamp cover screws. Do not block or cover the vents. 4 To replace the lamp, first unplug the power cord then wait for more than 1 hour. The lamp might be broken. Be careful of pieces of broken glass.

3 4 1 2

viii Table of Contents Important Information............................................................................................i 1. Introduction.......................................................................................................... 1 1 What’s in the Box?......................................................................................................... 1 2 Introduction to the Projector........................................................................................... 2 Congratulations on Your Purchase of the Projector.................................................. 2 Features you’ll enjoy:................................................................................................ 2 About this user’s manual.......................................................................................... 3 3 Part Names of the Projector .......................................................................................... 4 Front/Top.................................................................................................................. 4 Rear ......................................................................................................................... 5 Top Features ............................................................................................................ 6 Terminal Panel Features .......................................................................................... 7 4 Part Names of the Remote Control................................................................................ 8 Battery Installation ................................................................................................... 9 Remote Control Precautions .................................................................................... 9 Operating Range for Wireless Remote Control ........................................................ 9 5 Operating Environment for Software Included on CD-ROM .........................................10 Operating Environment ...........................................................................................11 2. Projecting an Image (Basic Operation) ...............................................12 1 Flow of Projecting an Image .........................................................................................12 2 Connecting Your Computer/Connecting the Power Cord ..............................................13 3 Turning on the Projector................................................................................................14 Note on Startup screen (Menu Language Select screen).......................................15 4 Selecting a Source .......................................................................................................16 Selecting the computer or video source..................................................................16 5 Adjusting the Picture Size and Position ........................................................................17 Adjusting the vertical position of a projected image (Lens shift) .............................18 Focus ......................................................................................................................19 Zoom...................................................................................................................... 20 Adjust the Tilt Foot ................................................................................................. 21 6 Correcting Keystone Distortion Manually..................................................................... 22 Adjusting with buttons on the cabinet..................................................................... 22 Adjusting with the remote control........................................................................... 23 7 Optimizing Computer Signal Automatically.................................................................. 24 Adjusting the Image Using Auto Adjust .................................................................. 24 8 Turning Up or Down Volume ........................................................................................ 24 9 Turning off the Projector............................................................................................... 25  After Use...................................................................................................................... 26 3. Convenient Features..................................................................................... 27 1 Turning off the Image and Sound................................................................................. 27 2 Freezing a Picture........................................................................................................ 27 3 Enlarging a Picture ...................................................................................................... 27 4 Changing Eco Mode/Checking Energy-Saving Effect Using Eco Mode [LAMP POWER]..................................................................................................... 28 ix Table of Contents Checking Energy-Saving Effect [CARBON METER].............................................. 29 5 Preventing the Unauthorized Use of the Projector [SECURITY] ......................................30 6 Using the Remote Mouse Receiver............................................................................. 33 7 Operating Your Computer’s Mouse Functions from the Projector’s Remote Control via the USB Cable (Remote Mouse Function) ....................................................... 35 8 Projecting Your Computer’s Screen Image from the Projector via the USB Cable (USB Display) ........................................................................................................ 36 9 Controlling the Projector by Using an HTTP Browser.................................................. 38  Projecting Your Computer’s Screen Image from the Projector via a Network [NETWORK PROJECTOR]............................................................. 45  Using the Projector to Operate Your Computer via a Network [REMOTE DESKTOP] ... 49 4. Using the Viewer ............................................................................................. 54 1 What you can do with the Viewer................................................................................. 54 2 Preparing presentation materials................................................................................. 57 3 Projecting images stored in a USB memory device..................................................... 58 Starting the Viewer................................................................................................. 58 Exiting the Viewer .................................................................................................. 60 Names and functions of Viewer screen.................................................................. 61 Viewer option settings............................................................................................ 66 4 Projecting data from shared folder............................................................................... 69 Connecting the projector to the shared folder ....................................................... 69 Disconnecting the shared folder from the projector................................................ 72 5 Projecting data from media server............................................................................... 73 Setting up “Media Sharing” in Windows Media Player 11....................................... 73 Setting up “Media Sharing” in Windows Media Player 12....................................... 75 Connecting the projector to the media server .........................................................76 Disconnecting the projector from the media server................................................ 77 5. Using On-Screen Menu................................................................................ 78 1 Using the Menus.......................................................................................................... 78 2 Menu Elements............................................................................................................ 79 3 List of Menu Items ....................................................................................................... 80 4 Menu Descriptions & Functions [INPUT] ..................................................................... 82 COMPUTER1 and 2 .............................................................................................. 82 HDMI...................................................................................................................... 82 VIDEO.................................................................................................................... 82 S-VIDEO ................................................................................................................ 82 VIEWER................................................................................................................. 82 NETWORK............................................................................................................. 82 USB DISPLAY........................................................................................................ 82 5 Menu Descriptions & Functions [ADJUST] .................................................................. 83 [PICTURE] ............................................................................................................. 83 [IMAGE OPTIONS] ................................................................................................ 86 [AUDIO].................................................................................................................. 90 6 Menu Descriptions & Functions [SETUP].................................................................... 91 [GENERAL]............................................................................................................ 91 [MENU] .................................................................................................................. 93 x Table of Contents [INSTALLATION] .................................................................................................... 95 [OPTIONS(1)] ........................................................................................................ 97 [OPTIONS(2)] ........................................................................................................ 99 7 Menu Descriptions & Functions [INFO.] .....................................................................101 [USAGE TIME] ......................................................................................................101 [SOURCE].............................................................................................................102 [WIRED LAN]........................................................................................................102 [WIRELESS LAN] .................................................................................................102 [VERSION(1)] .......................................................................................................103 [VERSION(2)] .......................................................................................................103 [OTHERS] .............................................................................................................103 8 Menu Descriptions & Functions [RESET]...................................................................104 Returning to Factory Default [RESET] ..................................................................104 9 Application Menu ........................................................................................................105 ADVANCED NETWORK / PROJECTION UTILITY...............................................105 NETWORK PROJECTOR.....................................................................................106 REMOTE DESKTOP CONNECTION ...................................................................106 NETWORK SETTINGS.........................................................................................107 TOOLS..................................................................................................................123 6. Installation and Connections..................................................................128 1 Setting Up the Screen and the Projector ....................................................................128 Selecting a Location..............................................................................................128 Throw Distance and Screen Size..........................................................................130 2 Making Connections...................................................................................................132 Connecting Your Computer ...................................................................................132 Connecting an External Monitor............................................................................134 Connecting Your DVD Player or Other AV Equipment...........................................135 Connecting Component Input ...............................................................................136 Connecting HDMI Input.........................................................................................137 Connecting to a Wired LAN...................................................................................138 Connecting to a Wireless LAN (sold separately)...................................................139 Mounting a wireless LAN unit ...............................................................................140 7. Maintenance .....................................................................................................142 1 Cleaning the Filters.....................................................................................................142 2 Cleaning the Lens.......................................................................................................145 3 Cleaning the Cabinet..................................................................................................145 4 Replacing the Lamp and the Filters ............................................................................146 8. User Supportware..........................................................................................151 1 Installing Software Program........................................................................................151 Installation for Windows software..........................................................................151 Installation for Macintosh software........................................................................153 2 Projecting Your Computer’s Screen Image from the Projector over a LAN (Projection Utility)..................................................................................................154 3 Projecting an Image from an Angle (Geometric Correction Tool in Projection Utility) .157 What you can do with GCT...................................................................................157 Projecting an Image from an Angle (GCT)............................................................157 xi Table of Contents 4 Projecting Images or Videos from the Projector over a LAN (Advanced Network Utility) ...................................................................................159 What you can do with Advanced Network Utility...................................................159 Connecting the projector to a LAN........................................................................160 Basic Operation of Advanced Network Utility .......................................................161 5 Projecting Your Mac’s Screen Image from the Projector over a LAN (Advanced Network Utility for Mac).......................................................................165 What you can do with Advanced Network Utility...................................................165 Operating environment..........................................................................................165 Connecting the projector to a LAN........................................................................165 Using Advanced Network Utility............................................................................166 6 JPEG Conversion Tool................................................................................................168 Installing JPEG Conversion Tool ...........................................................................168 7 Managing the Projector Using Projector Management Utility......................................169 Operating environment..........................................................................................169 Installing Projector Management Utility.................................................................169 9. Appendix..............................................................................................................170 1 Troubleshooting ..........................................................................................................170 Indicator Messages...............................................................................................170 Common Problems & Solutions ............................................................................171 If there is no picture, or the picture is not displayed correctly................................172 2 Specifications .............................................................................................................173 3 Cabinet Dimensions ...................................................................................................175 4 Pin Assignments of D-Sub Computer Input Connector...............................................176 5 Compatible Input Signal List.......................................................................................177 6 PC Control Codes and Cable Connection ..................................................................178 xii 1. Introduction 1 What’s in the Box? Make sure your box contains everything listed. If any pieces are missing, contact your dealer. Please save the original box and packing materials if you ever need to ship your projector. NOTE: The bundled items may vary depending on the product destination. Projector Remote control Batteries (AAA × 2)

Remote mouse receiver Power cord Computer cable (VGA) (Y156079) CD-ROM (× 2) User’s manual (PDF), the utility

software and the source code • Important Infomation • Quick Setup Guide Unless otherwise described in the user’s manual, the drawings for the projector cabinet show examples of the PJ X5360N. 1 1. Introduction 2 Introduction to the Projector This section introduces you to your new projector and describes the features and controls. Congratulations on Your Purchase of the Projector This projector is one of the very best projectors available today. The projector enables you to project precise images up to 300 inches across (measured diagonally) from your PC or Macintosh computer (desktop or notebook), VCR, DVD player, or document camera. You can use the projector on a tabletop or cart, you can use the projector to project images from behind the screen, and the projector can be permanently mounted on a ceiling*1. The remote control can be used wirelessly. *1 Do not attempt to mount the projector on a ceiling yourself. The projector must be installed by qualified technicians in order to ensure proper operation and reduce the risk of bodily injury. In addition, the ceiling must be strong enough to support the projector and the installation must be in accordance with any local building codes. Please consult your dealer for more information. Features you’ll enjoy: • Quick start (3 seconds*1), Quick Power Off (0 seconds), Direct Power Off 3 seconds*1 after turning on the power, the projector is ready to display PC or video images. The projector can be put away immediately after the projector is powered down. No cool down period is required after the projector is turned off from the remote control or cabinet control panel. The projector has a feature called “Direct Power Off”. This feature allows the projector to be turned off (even when projecting an image) by using the Main Power Switch or disconnecting the AC power supply. To turn off the AC power supply when the projector is powered on, use a power strip equipped with a switch and a breaker. *1 The quick start time is only when [STANDBY MODE] is set to [NORMAL] in the on-screen message. • 0.2 W (100-130 V AC)/0.4 W (200-240 V AC) in standby condition with energy saving technology Selecting [POWER-SAVING] for [STANDBY MODE] from the menu can put the projector in power-saving mode that consumes only 0.2 W (100-130 V AC)/0.4 W (200-240 V AC). • Carbon Meter This feature will show energy-saving effect in terms of CO2 emission reduction (kg) when the projector’s [LAMP POWER] is set to [AUTO ECO] or [ECO1]. The amount of CO2 emission reduction will be displayed in the confirmation message at the time of power-off and in the INFO of the on-screen menu. • Lamp life up to 3500 hours without cleaning the filters regularly Using in Eco Mode allows you to prolong the projector’s lamp life up to 3500 hours (up to 3000 hours in NORMAL Mode (ECO Mode OFF)) The two-layer, large filters require no regular cleaning. Filter replacement is requred only when lamp replacement is done. • Vertical lens shift mechanism offers installation flexibility Manual lens shift that can be adjusted by turning dials on the top of the projector. • HDMI input port provides digital signal The HDMI input provides HDCP compatible digital signals. The HDMI input also supports audio signal. • 10 W built-in speaker for an integrated audio solution Powerful 10 watt monaural speaker provides volume need for large rooms. 2 1. Introduction • The supplied remote control allows you to assign a CONTROL ID to the projector Multiple projectors can be operated separately and independently with the same single remote control by assigning an ID number to each projector. • Vertical keystone correction Keystone feature allows the projector to correct vertical distortion. • USB Display Using a commercially available USB cable (compatible with USB 2.0 specifications) to connect the computer with the projector allows you to send your computer screen image to the projector without the need of a traditional computer cable (VGA). • Wired/wireless LAN compatibility (wireless LAN unit sold separately) The projector is equipped with a LAN port (RJ-45) for connection to a wired LAN for transferring images from a computer to the projector, controlling the projector from a computer, etc. Furthermore, the projector can be used in a wireless LAN by mounting the separately sold wireless LAN unit (NP02LM). • Software programs (User Supportware) contained in the supplied CD-ROM The supplied Ricoh Projector includes programs: Projection Utility, Advanced Network Utility, Advanced Network Utility for Mac, JPEG Conversion Tool, and Projector Management Utility. • LAN-compatible Viewer The projector’s built-in Viewer allows you to view images or movie files in the shared folder of your PC connected to a wired or wireless LAN. * The Viewer supports the Media Sharing function of Windows Media Player 11. • AUTO POWER ON and POWER OFF ON NO SIGNAL features The POWER ON METHOD,AUTO POWER ON(COMP1), POWER OFF ON NO SIGNAL, and OFFTIMER features eliminate the need to always use the Power button on the remote control or projector cabinet. • Preventing unauthorized use of the projector Enhanced smart security settings for keyword protection, cabinet control panel lock, security slot, and security chain opening to help prevent unauthorized access, adjustments and theft deterrence. • High resolution up to UXGA High resolution display - up to UXGA compatible, XGA (PJ X5360N)/WXGA (PJ WX5350N) native resolution. • Crestron RoomView® supported The projector suppors Crestron RoomView which allows you to control and manage equipment connected to your network from your computer. About this user’s manual The fastest way to get started is to take your time and do everything right the first time. Take a few minutes now to review the user’s manual. This may save you time later on. At the beginning of each section of the manual you’ll find an overview. If the section doesn’t apply, you can skip it. 3 1. Introduction 3 Part Names of the Projector Front/Top Controls

Zoom Lever (→ page 20) Focus Lever (→ page 19) Ventilation (outlet) Heated air is exhausted from here. Lens Cover Adjustable Tilt Foot Lever (→ page 21) Adjustable Tilt Foot (→ page 21) (→ page 6) Lens Shift Dial (Vertical) (→ page 18) Ventilation (inlet) / Filter Cover (→ page 142, 149) Remote Sensor (→ page 9) Lens

4

Rear Port Cover for USB Wireless LAN Unit 1. Introduction Remote Sensor (→ page 9) When using the USB Wireless LAN Unit, first remove the cover. (→ page 140) Monaural Speaker (10 W) Terminal Panel (→ page 7) AC Input Connect the supplied power cord’s three-pin plug here, and plug the other end into an active wall outlet. (→ page 13) * This security slot supports the MicroSaver ® Security System. Opening and closing the lens cover Slide the lens cover to the left to uncover the lens. To cover the lens, slide the lens cover to the right. NOTE: Lamp Cover (→ page 147) Built-in Security Slot ( )* Security chain opening Attach an anti-theft device. The security chain opening ac cepts security wires or chains up to 0.18 inch/4.6 mm in diameter. Rear Foot (→ page 21)

• The lens cover works in conjunction with the AV mute function. Closing the lens cover will turn off the image and sound during normal projector operation; opening it will restore the image and sound. With the lens cover closed the image and sound is turned off, however the lamp is still lit. If the projector stays this way for about 2 hours, it will turn off automatically. • Do not pull the lens cover with excessive force or apply strong pressure in either the up or down direction. Doing so can cause damage to the lens cover sliding mechanism! 5 1. Introduction Top Features

9 10

8 11 5

6 3 1. (Power) Button (→ page 14, 25) 2. Power Indicator (→ page 13, 14, 25, 170) 3. Status Indicator (→ page 170) 4. Lamp Indicator (→ page 146, 170) 5. Eco Button (→ page 28) 6. Input Button (→ page 16) 7. Auto Set Button (→ page 24) 8. Menu Button (→ page 78) 7 4 1/2

9.  / Volume Buttons  / Keystone Buttons  (→ page 22, 24) 10. Enter Button (→ page 78) 11. Back Button (→ page 78) 6 1. Introduction Terminal Panel Features 13 12 6 5 3 2 1 4 10 11 9 7 8 14 1. Computer 1 In / Component Input Connector (Mini D-Sub 15 Pin) (→ page 132, 136) 2. Computer 1 Audio In Mini Jack (Stereo Mini) (→ page 132, 134, 136) 3. Computer 2 In / Component Input Connector (Mini D-Sub 15 Pin) (→ page 132, 136) 4. Computer 2 Audio In Mini Jack (Stereo Mini) (→ page 132, 134, 136) 5. HDMI In Connector (Type A) (→ page 132, 137) 6. USB (PC) Port (Type B) (→ page 35, 36, 132) 7. Monitor Out (Comp.1) Connector (Mini D-Sub 15 Pin) (→ page 134) 8. Audio Out Mini Jack (Stereo Mini) (→ page 134) 9. S-Video In Connector (Mini DIN 4 Pin) (→ page 135) 10. Video In Connector (RCA) (→ page 135) 11. Video/S-Video Audio In (L/Mono, R) Connectors (RCA) (→ page 135) 12. LAN Port (RJ-45) (→ page 140) 13. USB Port (Type A) (→ page 60) 14. PC Control Port (D-Sub 9 Pin) (→ page 178) Use this port to connect a PC or control system. This enables you to control the projector using serial commu nication protocol. If you are writing your own program, typical PC control codes are on page 178.Be sure to use a crossing cable. 7 1. Introduction 4 Part Names of the Remote Control

1 2 4 8 9 11 1417 18 21 22 23 26 31 1. Infrared Transmitter (→ page 9) 2. Power On Button (→ page 14) 3. Power Standby Button (→ page 25) 4, 5, 6. Computer 1/2/3 Button (→ page 16) 375 6 10 15 13 12 16 19 20 25 27 24 28 29 30 11. Viewer Button (→ page 16, 58) 12. Network Button (→ page 16) 13. USB Display Button (→ page 16) 14. ID Set Button (→ page 96) 15. Numeric Keypad Button/Clear Button (→ page 96) 16. Freeze Button (→ page 27) 17. AV Mute Button (→ page 27) 18. Menu Button (→ page 78) 19. Back Button (→ page 78) 20.  Button (→ page 78) 21. Enter Button (→ page 78) 22. Magnify (+)(–) Button (→ page 27) 23. Mouse L Click Button* (→ page 35) 24. Mouse R Click Button* (→ page 35) 25. Page / Button* (→ page 35) 26. Eco Button (→ page 28) 27. Keystone Button (→ page 23)

(Computer 3 button is not available.) 7. Auto Set Button (→ page 24) 8. Video Button (→ page 16) 9. S-Video Button (→ page 16) 10. HDMI Button (→ page 16) 28. Picture Button (→ page 83, 85) 29. Volume (+)(–) Button (→ page 24) 30. Aspect Button (→ page 88) 31. Help Button (→ page 101)

* The Page /, , Mouse L Click and Mouse R Click buttons work only when a USB cable is connected with your computer. 8

Battery Installation 1 Press firmly and slide the battery cover off. OPEN Remote Control Precautions • Handle the remote control carefully. 2 Install new batteries (AAA).Ensure that you have the batteries’polarity (+/−) aligned correctly. 1. Introduction 3 Slip the cover back over the batter ies until it snaps into place. Do not mix different types of batteries or new and old batteries. OPEN

• If the remote control gets wet, wipe it dry immediately. • Avoid excessive heat and humidity. • Do not short, heat, or take apart batteries. • Do not throw batteries into fire. • If you will not be using the remote control for a long time, remove the batteries. • Ensure that you have the batteries’ polarity (+/−) aligned correctly. • Do not use new and old batteries together, or use different types of batteries together. • Dispose of used batteries according to your local regulations. Operating Range for Wireless Remote Control 7 m/22 feet 30° 30° 30° Remote control

Remote control 30° 30° 30° 7 m/22 feet Remote sensor on projector cabinet 30° 30°

7 m/22 feet 7 m/22 feet • The infrared signal operates by line-of-sight up to a distance of about 22 feet/7 m and within a 60-degree angle of the remote sensor on the projector cabinet. • The projector will not respond if there are objects between the remote control and the sensor, or if strong light falls on the sensor. Weak batteries will also prevent the remote control from properly operating the projector. 9 1. Introduction 5 Operating Environment for Software Included on CD-ROM Names and Features of Bundled Software Programs Name of software program Features Projection Utility • This is a software program used to project your computer’s screen over the USB cable or the wired/wireless network. The computer cable (VGA) is not required. (→ page 36, page 154) • This software program can be used to control the power ON/OFF and source selection of the projector from your computer. • The Geometric Correction Tool (GCT) function allows you to correct distortion of images projected on a curved wall. (→ page 157) Advanced Network Utility • This is a software program used to send the screens of your personal comput ers to the projector via wired/wireless LAN (Meeting mode). Projected images can be transferred and saved to personal computers. When “Meeting Mode”is used, projected images can be sent and saved to the personal computers. Images can be sent from a personal computer to not only one projector but also to two or more projectors at the same time.(→ page 159) Advanced Network Utility for Mac • This is a software program used to send the Mac’s screen image to the projec tor over a network (wired or wireless LAN).(→ page 165) For Mac’s operating environment, see page 165. JPEG Conversion Tool • The JPEG Conversion Tool converts JPEG files not supported by the projec tor, image files in other formats, PowerPoint files, and other similar files into JPEG files. (→ page 168) Projector Management Utility • Projector Management Utility conforms to the PJLink class 1 standards, and is compatible with all class 1 commands. A maximum of 100 projectors connected to the network can be managed using one computer. (→ page 169) Projector Management Utility’s operating environment, see page 169. NOTE: • Projection Utility does not support “Meeting Mode” in Advanced Network Utility and Advanced Network Utility for Mac included with our other models. 10 1. Introduction Operating Environment The following is the operating environment for Projection Utility. For the operating environment of other software pro gram, refer to the help function of each software program. Supported OS Windows 7 Home Basic Windows 7 Home Premium Windows 7 Professional Windows 7 Ultimate Windows 7 Enterprise Windows Vista Home Basic Windows Vista Home Premium Windows Vista Business Windows Vista Ultimate Windows Vista Enterprise Windows XP Home Edition Service Pack 3 or later Windows XP Professional Service Pack 3 or later • Only 32-bit version • Windows power-saving function is not supported. Processor • Windows 7/Windows Vista Pentium M 1.2 GHz equivalent or higher required Dual core 1.5 GHz or higher recommended • Windows XP Pentium M 1.0 GHz equivalent or higher required Dual core 1.0 GHz or higher recommended Memory • Windows 7/Windows Vista 512 MB or more required 1 GB or more recommended • Windows XP 256 MB or more required 512 MB or more recommended * More memory may be required to run additional applications simultaneously. Graphic processor • Windows 7/Windows Vista The “Graphics” score 3.0 or more of “Windows Experience Index” recommended. Network environment TCP/IP-compatible wired LAN or wireless LAN (* Use a wireless LAN unit complying with the Wi-Fi standard.) Resolution • Windows 7/Windows Vista SVGA (800 × 600) or higher required XGA (1024 × 768) recommended • Windows XP VGA (640 × 480) or higher required XGA (1024 × 768) recommended 1024 dots × 768 lines - 1280 dots × 800 lines recommended (PJ WX5350N) Screen Colors High Color (15 bits, 16 bits) True Color (24 bits, 32 bits) (recommended) • 256 or fewer colors are not supported. 11 2. Projecting an Image (Basic Operation)This section describes how to turn on the projector and to project a picture onto the screen. 1 Flow of Projecting an Image Step 1 • Connecting your computer / Connecting the power cord (→ page 13) Step 2 • Turning on the projector (→ page 14) Step 3 • Selecting a source (→ page 16) Step 4 • Adjusting the picture size and position (→ page 17) • Correcting keystone distortion [KEYSTONE] (→ page 22) Step 5 • Adjusting a picture and sound - Optimizing a computer signal automatically (→ page 24) - Turning up or down volume (→ page 24) Step 6 • Making a presentation Step 7 • Turning off the projector (→ page 25) Step 8 • After use (→ page 26) 12 2. Projecting an Image (Basic Operation) 2 Connecting Your Computer/Connecting the Power Cord 1. Connect your computer to the projector. This section will show you a basic connection to a computer. For information about other connections, see "2 Making Connections" on page 132. Connect the computer cable (VGA) between the projector’s Computer 1 In connector and the computer’s port (mini D-Sub 15 Pin). Turn two thumb screws of both connectors to fix the computer cable (VGA). 2. Connect the supplied power cord to the projector. First connect the supplied power cord’s three-pin plug to the AC IN of the projector, and then connect the other plug of the supplied power cord in the wall outlet. The projector’s Power indicator will flash for a few seconds and then will light orange* (standby mode). The Status indicator will also light green*. * This will apply for both indicators when [NORMAL] is selected for [STANDBY MODE]. See the Power Indicator section.(→ page 170) Make sure that the prongs are fully inserted into both the AC IN and the wall outlet. To wall outlet ← CAUTION: Parts of the projector may become temporarily heated if the projector is turned off with the Power button or if the AC power supply is disconnected during normal projector operation. Use caution when picking up the projector. 13

3 Turning on the Projector 1. Slide the lens cover to the left to uncover the lens. 2. Press the (Power) button on the projector cabinet or the Power On button on the remote control. The Power indicator will turn to blue and the projector will become ready to use. TIP: • When the message “PROJECTOR IS LOCKED! ENTER YOUR KEYWORD.” is displayed, it means that the [SECURITY] feature is turned on. (→ page 30) • When the ECO message is displayed, it means that [ON] is selected for [ECO MESSAGE]. (→ page 94) • Pressing buttons such as Power button and Menu button will make sound. To turn off the beep sound, select [OFF] for [BEEP] from the menu. (→ page 98) After you turn on your projector, ensure that the computer or video source is turned on and that the lens cover is open. NOTE: When no input signal is present, the no-signal guidance is displayed (factory menu setting). 2. Projecting an Image (Basic Operation) Standby Blinking Power On Steady orange light Blinking blue light Steady blue light (→ page 170)

14 2. Projecting an Image (Basic Operation) Note on Startup screen (Menu Language Select screen) When you first turn on the projector, you will get the Startup menu.This menu gives you the opportunity to select one of the 17 menu languages. To select a menu language, follow these steps: 1. Use the , H, F or E button to select one of the 17 languages from the menu. 2. Press the Enter button to execute the selection. After this has been done, you can proceed to the menu op eration. If you want, you can select the menu language later. (→ [LANGUAGE] on page 80 and 93) NOTE: • When turning off the power supply and then back on by using a power strip or breaker. Allow a minimum of 1 second between turning off the main power supply and turning it back on again. Failing to do so could result in no power to the projector. (There will be no stand-by LED) Should this happen, unplug the power cord and plug it in again. Turn on the main power. • If one of the following things happens, the projector will not turn on. • If the internal temperature of the projector is too high, the projector detects abnormal high temperature. In this condition the projector will not turn on to protect the internal system. If this happens, wait for the projector’s internal components to cool down. • When the lamp reaches its end of usable life, the projector will not turn on. If this happens, replace the lamp. • If the Status indicator lights orange with the Power button pressed, it means that the [CONTROL PANEL LOCK] is turned on. Cancel the lock by turning it off. (→ page 95) • If the lamp fails to light, and if the Status indicator flashes on and off in a cycle of six times, wait a full minute and then turn on the power. • While the Power indicator is blinking blue in short cycles, the power cannot be turned off by using the Power button. • Immediately after turning on the projector, screen flicker may occur. This is normal. Wait 3 to 5 minutes until the lamp lighting is stabilized. • When the projector is turned on, it may take some time before the lamp light becomes bright. • If you turn on the projector immediately after the lamp is turned off or when the temperature is high, the fans run without display ing an image for some time and then the projector will display the image. 15 2. Projecting an Image (Basic Operation) 4 Selecting a Source Selecting the computer or video source NOTE: Turn on the computer or video source equipment connected to the projector. Detecting the Signal Automatically Press the Input button once. The projector will search for the available input source and display it. The input source will change as follows: COMPUTER1 → COMPUTER2 → HDMI → VIDEO → S-VIDEO → VIEWER → USB DISPLAY → COMPUTER1 → ... • With the INPUT screen displayed, you can press the Input button a few times to select the input source. TIP: If no input signal is present, the input will be skipped. Using the Remote Control Press any one of the Computer 1, Computer 2, HDMI, Video, S-Video, Viewer, Network, or USB Display buttons. Selecting Default Source You can set a source as the default source so that it will be displayed each time the projector is turned on. 1. Press the Menu button. The menu will be displayed. 2. Press the  button twice to select [SETUP] and press the H button or the Enter button to select [GENERAL]. 3. Press the  button three times to select [OPTIONS(2)]. 4. Press the H button six times to select [DEFAULT SOURCE SELECT] and press the Enter button. The [DEFAULT SOURCE SELECT] screen will be displayed. (→ page 100) 5. Select a source as the default source, and press the Enter button. 6. Press the Back button a few times to close the menu. 7. Restart the projector. The source you selected in step 5 will be projected. NOTE: Even when [AUTO] is turned on, the [NETWORK] will not be automatically selected. To set your network as the default source, select [NETWORK]. TIP: • When the projector is in Standby mode, applying a computer signal from a computer connected to the Computer 1 In input will power on the projector and simultaneously project the computer’s image. ([AUTO POWER ON(COMP1)] → page 100) • On the Windows 7 keyboard, a combination of the Windows and P keys allows you to set up external display easily and quickly. 16 2. Projecting an Image (Basic Operation) 5 Adjusting the Picture Size and Position Use the Lens Shift dial, the adjustable tilt foot lever, the Zoom lever and the Focus lever to adjust the picture size and position. In this chapter drawings and cables are omitted for clarity.

Adjusting the vertical position of a projected image [Lens shift] (→ page 18) Adjusting the focus [Focus lever] (→ page 19) Finely adjusting the size of an image [Zoom lever] (→ page 20) Adjusting the throw angle (the height of an image) [Tilt foot] *¹ (→ page 21) Adjusting the left and right tilt of an image [Rear foot] (→ page 21) Adjusting the keystone correction [Keystone] (→ page 22)

NOTE*1: Adjust the throw angle (the height of an image) when the image position is higher than the lens shift adjustable range. 17 2. Projecting an Image (Basic Operation) Adjusting the vertical position of a projected image (Lens shift) Rotate the Lens Shift dial. In this user’s manual, the upward maximum shift is referred to as “normal position”. Downward Upward Lens Shift dial NOTE: The Lens Shift dial cannot be rotated beyond the maximum upward or downward shift. Forcibly rotating may cause damage to the projector. TIP: Lens shift can be adjusted with the range below. If you wish to move up the image higher than this limit, use the tilt foot of the projector. Desktop front projection [PJ X5360N] Height of projected image Vertical shift range (0 to 0.5V) [PJ WX5350N] Height of projected image Vertical shift range (0 to 0.6V) 18 2. Projecting an Image (Basic Operation) Ceiling front projection [PJ X5360N] Vertical shift range (0 to 0.5V) Height of projected image [PJ WX5350N] Vertical shift range (0 to 0.6V) Height of projected image Focus Use the Focus lever to obtain the best focus. Focus Lever 19 2. Projecting an Image (Basic Operation) Zoom Use the Zoom lever to adjust the image size on the screen. Zoom Lever 20

Adjust the Tilt Foot 1. Lift the front edge of the projector. CAUTION: 2. Projecting an Image (Basic Operation)

1 Do not try to touch the ventilation outlet during Tilt Foot adjustment as it can become heated while the projector is turned on and after it is turned off. 2 2. Push up and hold the Adjustable Tilt Foot Lever on the front of the

projector to extend the adjustable tilt foot. 3. Lower the front of the projector to the desired height. 4. Release the Adjustable Tilt Foot Lever to lock the Adjustable tilt foot. The tilt foot can be extended up to 1.6 inch/40 mm. There is approximately 10 degrees (up) of adjustment for the front of the projector. Rotate the rear foot to the desired height in order to square the image on the projection surface. CAUTION: • Do not use the tilt-foot for purposes other than originally intended. Misuses such as using the tilt foot to carry or hang (from the wall or ceiling) the projector can cause damage to the projector. Adjusting the left and right tilt of an image [Rear foot] • Rotate the rear foot. The rear foot can be extended up to 0.5 inch/12 mm. Rotating the rear foot allows the projector to be placed horizontally. NOTE: • Do not extend the rear foot beyond its height limit (0.5 inch/12 mm). Doing so may cause the rear foot to come out of the projector. Adjustable Tilt Foot Adjustable Tilt Foot Lever 3 Rear foot

Up Down 21 2. Projecting an Image (Basic Operation) 6 Correcting Keystone Distortion Manually If the screen is tilted vertically, keystone distortion becomes large. To correct keystone distortion manually, proceed with the following steps to correct keystone distortion. NOTE: • The maximum range of vertical keystone correction is +/−30 degrees. • The Keystone correction can cause an image to be slightly blurred because the correction is made electronically. • The Keystone correction range can be made narrower, depending on a signal or its aspect ratio selection. Adjusting with buttons on the cabinet 1. Press the  or  button with no menus displayed. The keystone bar will be displayed. 2. Use the  or  to correct the keystone distortion. 3. Press the Enter button. The keystone bar will be closed. NOTE: • When the menu is displayed, the above operation is not available. When the menu is displayed, press the Menu button to close the menu and start the Keystone correction. From the menu, select [SETUP] → [GENERAL] → [KEYSTONE]. The changes can be saved with [KEYSTONE SAVE]. (→ page 91) • Keystone control is not available with the  or  button when VIEWER or NETWORK is used. 22 2. Projecting an Image (Basic Operation) Adjusting with the remote control 1. Press the Keystone button. The Keystone bar will be displayed. 2. Use the  or  button to correct the keystone distortion. Adjust so that the right and left sides are parallel. 3. Press the Back button. The Keystone bar will be closed. 23 2. Projecting an Image (Basic Operation) 7 Optimizing Computer Signal Automatically Adjusting the Image Using Auto Adjust Optimizing a computer image automatically. (COMPUTER1/COMPUTER2) Press the Auto Set button to optimize a computer image automatically. This adjustment may be necessary when you connect your computer for the first time. [Poor picture] [Normal picture] NOTE: Some signals may take time to display or may not be displayed correctly. • If the Auto Adjust operation cannot optimize the computer signal, try to adjust [H-POSITION], [V-POSITION], [FREQUENCY], and [PHASE] manually. (→ page 86, 87) 8 Turning Up or Down Volume Sound level from the speaker can be adjusted. Increase volume Decrease volume TIP: When no menus appear, the  and  buttons on the projector cabinet work as a volume control. NOTE: • Volume control is not available with the  or  button when an image is enlarged by using the Magnify (+) button or when the menu is displayed. • Volume control is not available with the  or  button when VIEWER or NET WORK is used. TIP: • The [BEEP] sound volume cannot be adjusted. To turn off the [BEEP] sound, from the menu, select [SETUP] → [OPTIONS(1)] → [BEEP] → [OFF]. • Volume can be controlled from the menu ([ADJUST] → [AUDIO]) 24 2. Projecting an Image (Basic Operation) 9 Turning off the Projector To turn off the projector: 1. First, press the (Power) button on the projector cabi net or the Power Standby button on the remote control. The [POWER OFF / ARE YOU SURE ? / CARBON SAV INGS- SESSION 0.000[g-CO2]] message will appear. 2. Secondly, press the Enter button or press the (Power) or the Power Standby button again.

The lamp will turn off and the projector will go into standby mode. When in standby mode, the Power indicator will light orange and the Status indicator will light green when [NORMAL] is selected for [STANDBY MODE]. CAUTION: Power On Steady blue light Standby Steady orange light Press twice

Parts of the projector may become temporarily heated if the projector is turned off with the Power button or if the AC power supply is disconnected during normal projector operation. Use caution when picking up the projector. NOTE: • While the Power indicator is blinking blue in short cycles, the power cannot be turned off. • You cannot turn off the power for 60 seconds immediately after turning it on and displaying an image. • Do not disconnect the AC power supply to the projector within 10 seconds of making adjustment or setting changes and closing the menu. Doing so can cause loss of adjustments and settings. 25 2. Projecting an Image (Basic Operation)  After Use Preparation: Make sure that the projector is turned off. 1. Unplug the power cord. 2. Disconnect any other cables. • Remove the USB memory if it is inserted into the projector. 3. Retract adjustable tilt foot if extended. 4. Slide the lens cover to the right to cover the lens. 26 3. Convenient Features 1 Turning off the Image and Sound Press theAV Mute button to turn off the image and sound for a short period of time. Press again to restore the image and sound. The projector’s power-saving function will work 10 seconds after the image is turned off. As a result, the lamp power will be reduced. NOTE: • Even though the image is turned off, the menu still remains on the screen. • Sound from the Audio Out jack (Stereo mini) can be turned off. • To restore the image, even if you press the AV Mute button immediately after the start of the power-saving function, the lamp brightness may not be restored to its original level. 2 Freezing a Picture Press the Freeze button to freeze a picture.Press again to resume motion. NOTE: The image is frozen but the original video is still playing back. 3 Enlarging a Picture You can enlarge the picture up to four times. NOTE: The maximum magnification may be less than four times depending on the signal. To do so: 1. Press the Magnify (+) button to magnify the picture. To move the magnified image, use the ,, or  button. 27 3. Convenient Features 2. Press the  button. The area of the magnified image will be moved 3. Press the Magnify (−) button. Each time the Magnify (−) button is pressed, the image is reduced. NOTE: • The image will be enlarged or reduced at the center of the screen. • Displaying the menu will cancel the current magnification. 4 Changing Eco Mode/Checking Energy-Saving Effect Using Eco Mode [LAMP POWER] The LAMP POWER (ECO1) increases lamp life, while lowering power consumption and cutting down on CO2 emissions. Three brightness modes of the lamp can be selected: [STND.], [AUTO ECO], and [ECO1] modes. [LAMP POWER] Description Status of Lamp indicator [STND.] This is the default setting (100% Brightness). Off

[AUTO ECO] Lamp power consumption will be changed between [STND.] and [ECO1] automatically according to picture level NOTE: A bright gradation may be less visible depending on the image. [ECO1] Low lamp power consumption (approx. 75% Bright ness). To turn on the [LAMP POWER], do the following: 1. Press the Eco button on the remote control to display [LAMP POWER] screen. 2. Press the Eco button again to select a mode you wish. • Each time the Eco button is pressed, the choices will be changed: STND. → AUTO ECO → ECO1 → STND. • When the projector is in ECO mode, the Lamp indicator will light green. TIP: • The leaf symbol at the bottom of the menu shows the current selection of ECO mode. 28 Steady Green light

3. Convenient Features NOTE: • The [LAMP POWER] can be changed by using the menu. Select [SETUP] → [GENERAL] → [LAMP POWER]. • The lamp life remaining and lamp hours used can be checked in [USAGE TIME]. Select [INFO.] → [USAGE TIME]. • The projector is always in [ECO1] for 90 seconds after the lamp is turned on and while the Power indicator is blinking blue. The lamp condition will not be affected even when [LAMP POWER] is changed. • After a lapse of 1 minute from when the projector displays no-signal guidance, a blue, black or logo screen, [LAMP POWER] will automatically switch to [ECO1]. The projector will return to the [STND.] once a signal is accepted. • If the projector is overheated in [STND.] mode, there may be a case where the [LAMP POWER] automatically changes to [ECO1] mode to protect the projector. When the projector is in [ECO1] mode, the picture brightness decreases. When the projector comes back to normal temperature, the [LAMP POWER] returns to [STND.] mode. Thermometer symbol [ ] indicates the [LAMP POWER] is automatically set to [ECO1] mode because the internal temperature is too high. Checking Energy-Saving Effect [CARBON METER] This feature will show energy-saving effect in terms of CO2 emission reduction (kg) when the projector’s [LAMP POWER] is set to [AUTO ECO] or [ECO1]. This feature is called as [CARBON METER]. There are two messages: [TOTAL CO2 REDUCTION] and [CARBON SAVINGS-SESSION]. The [TOTAL CO2 RE DUCTION] message shows the total amount of CO2 emission reduction from the time of shipment up to now.You can check the information on [USAGE TIME] from [INFO.] of the menu. (→ page 101) The [CARBON SAVINGS-SESSION] message shows the amount of CO2 emission reduction between the time of changing to LAMP POWER immediately after the time of power-on and the time of power-off.The [CARBON SAVINGS SESSION] message will be displayed in the [POWER OFF/ ARE YOU SURE ?] message at the time of power-off. TIP: • The formula as shown below is used to calculate the amount of CO2 emission reduction. Amount of CO2 emission reduction = (Power consumption in STND. for LAMP POWER − Power consumption in AUTO ECO/ECO1 for LAMP POWER) × CO2 conversion factor.* When the image is turned off with the AV Mute button or with the lens cover closed, the amount of CO2 emmission reduction will also increase. * Calculation for amount of CO2 emission reduction is based on an OECD publication “CO2 Emissions from Fuel Combustion, 2008 Edition”. • The [TOTAL CO2 REDUCTION] is calculated based on savings recorded in 15 minutes intervals. • This formula will not apply to the power consumption which is not affected by whether [LAMP POWER] is turned on or off. 29 3. Convenient Features 5 Preventing the Unauthorized Use of the Projector [SECURITY] A keyword can be set for your projector using the Menu to avoid operation by an unauthorized user.When a keyword is set, turning on the projector will display the Keyword input screen. Unless the correct keyword is entered, the projector cannot project an image. • The [SECURITY] setting cannot be cancelled by using the [RESET] of the menu. To enable the Security function: 1. Press the Menu button. The menu will be displayed. 2. Press the  button twice to select [SETUP] and press the  button or the Enter button to select [GENERAL]. 3. Press the  button to select [INSTALLATION]. 4. Press the  button three times to select [SECURITY] and press the Enter button. The OFF/ON menu will be displayed. 5. Press the  button to select [ON] and press the Enter button. The [SECURITY KEYWORD] screen will be displayed. 6. Type in a combination of the four  buttons and press the Enter button. NOTE: A keyword must be 4 to 10 digits in length. The [CONFIRM KEYWORD] screen will be displayed. NOTE: Make a note of your password and store it in a safe place. 30 3. Convenient Features 7. Type in the same combination of  buttons and press the Enter button. The confirmation screen will be displayed. 8. Select [YES] and press the Enter button. The SECURITY function has been enabled. To turn on the projector when [SECURITY] is enabled: 1. Press the Power button. The projector will be turned on and display a message to the effect that the projector is locked. 2. Press the Menu button. 3. Type in the correct keyword and press the Enter button. The projector will display an image. NOTE: The security disable mode is maintained until the main power is turned off or unplugging the power cord. 31 3. Convenient Features To disable the SECURITY function: 1. Press the Menu button. The menu will be displayed. 2. Select [SETUP] → [INSTALLATION] → [SECURITY] and press the Enter button. The OFF/ON menu will be displayed. 3. Select [OFF] and press the Enter button. The SECURITY KEYWORD screen will be displayed. 4. Type in your keyword and press the Enter button. When the correct keyword is entered, the SECURITY function will be disabled. NOTE: If you forget your keyword, contact your dealer. Your dealer will provide you with your keyword in exchange for your request code. Your request code is displayed in the Keyword Confirmation screen. In this example [NB52-YGK8-2VD6-K585-JNE6-EYA8] is a request code. 32 3. Convenient Features 6 Using the Remote Mouse Receiver The remote mouse receiver enables you to operate your computer’s mouse functions from the remote control. It is a great convenience for clicking through your computer-generated presentations. Connecting the remote mouse receiver to your computer If you wish to use the remote mouse function, connect the mouse receiver and computer. The mouse receiver can be connected directly to the computer’s USB port (type A). NOTE: Depending on the type of connection or OS installed on your computer, you may have to restart your computer or change your computer settings. Computer Remote mouse receiver To USB port of PC or Macintosh When operating a computer via the remote mouse receiver 7 m/22 feet Remote sensor on the remote mouse receiver When connecting using the USB terminal For PC, the mouse receiver can only be used with a Windows XP*, Windows Vista, Windows 7, or Mac OS X 10.0.0 or later operating system. * NOTE: In SP1 or older version of Windows XP, if the mouse cursor will not move correctly, do the following: Clear the Enhance pointer precision check box underneath the mouse speed slider in the Mouse Properties dialog box [Pointer Options tab]. NOTE: The Page  and  buttons do not work with PowerPoint for Macintosh. NOTE: Wait at least 5 seconds after disconnecting the mouse receiver before reconnecting it and vice versa. The computer may not identify the mouse receiver if it is repeatedly connected and disconnected in rapid intervals. 33 3. Convenient Features Operating your computer’s mouse from the remote control You can operate your computer’s mouse from the remote control. Page / Button: scrolls the viewing area of the window or to move to the previous or next slide in PowerPoint on your computer.  Buttons: moves the mouse cursor on your computer. L Click Button: works as the mouse left button. R Click Button: works as the mouse right button. NOTE: • When you operate the computer using the  or  button with the menu displayed, both the menu and the mouse pointer will be affected. Close the menu and perform the mouse operation. • The Page  and  buttons do not work with PowerPoint for Macintosh. About Drag Mode: By pressing the L Click or R Click button for 2 or 3 seconds then releasing, the drag mode is set and the drag opera tion can be performed simply by pressing the  button.To drop the item, press the L Click (or R Click) button.To cancel it, press the R Click (or L Click) button. TIP: You can change the Pointer speed on the Mouse Properties dialog box on the Windows. For more information, see the user documentation or online help supplied with your computer. 34 3. Convenient Features 7 Operating Your Computer’s Mouse Functions from the Projec tor’s Remote Control via the USB Cable (Remote Mouse Function) The built-in remote mouse function enables you to operate your computer’s mouse functions from the supplied remote control when the projector is connected to a computer via a commercially available USB cable (compatible with USB 2.0 specifications). The Remote Mouse function works for the Computer 1 or Computer 2 input while the computer screen is displayed. The Remote Mouse function will not work while you freeze or magnify an image. - Using the USB cable to connect the projector and the computer will also start USB Display function. (→ page 36) USB cable (not supplied) NOTE: • A USB cable must support the USB 2.0 Specifications. • The mouse function can be used with the following operating systems: Windows 7, Windows XP, or Windows Vista • In older version than SP2 of Windows XP, if the mouse cursor will not move correctly, do the following: Clear the Enhance pointer precision check box underneath the mouse speed slider in the Mouse Properties dialog box [Pointer Options tab]. • Wait at least 5 seconds after disconnecting the USB cable before reconnecting it and vice versa. The computer may not identify the USB cable if it is repeatedly connected and disconnected in rapid intervals. NOTE: • Connect the projector to the computer with a USB cable after starting the computer. Failure to so may fail to start the computer. Operating your computer’s mouse from the remote control You can operate your computer’s mouse from the remote control. Page / Button ����������������������������scrolls the viewing area of the window or to move to the previous or next slide in PowerPoint on your computer.  Buttons������������������������������moves the mouse cursor on your computer. Mouse L Click/Enter Button �������������works as the mouse left button. Mouse R Click Button ����������������������works as the mouse right button. NOTE: • When you operate the computer using the  or  button with the menu displayed, both the menu and the mouse pointer will be affected. Close the menu and perform the mouse operation. TIP: You can change the Pointer speed on the Mouse Properties dialog box on the Windows. For more information, see the user documentation or online help supplied with your computer. 35 3. Convenient Features 8 Projecting Your Computer’s Screen Image from the Projector via the USB Cable (USB Display) Using a commercially available USB cable (compatible with USB 2.0 specifications) to connect the computer with the projector allows you to send your computer screen image to the projector for displaying. Power On/Off and source selection of the projector can be done from your computer without connecting a computer cable (VGA). NOTE: • To make USB DISPLAY available on Windows XP, the Windows user account must have “Administrator” privilege. • USB Display uses functions of Projection Utility contained on CD-ROM (→ page 154). Starting USB Display, however, will not install Projection Utility on your computer. This is because USB Display executes the projector’s program only. • USB Display will not work in [POWER-SAVING] of [STANDBY MODE]. (→ page 99) 1. Start the computer. 2. Connect the projector’s power cord to the wall outlet and put the projector into standby condition. • Open the projector’s lens cover. 3. Use the USB cable to connect the computer with the projector. USB cable (not supplied) → To wall outlet Power cord (supplied) The message “The projector is in standby mode. Connect it?” will be displayed on the computer screen. • The control window of Projection Utility will be displayed on the top of the screen. NOTE: Depending on the computer setting, the “AutoPlay” window may be displayed when the computer detects the connection to the projector. If this happens, click the “Start USB Display” window. 4. Click “Yes”. The projector will turn on and the message “The projector is getting ready. Please wait.” will be displayed on the computer screen. This message will disappear in a few seconds. 36 3. Convenient Features 5. Operate the control window. (6) (1) (2) (3) (4) (5) (1) (Source)����� Selects an input source of the projector. (2) (Picture) ���� Turns on or off the AV-MUTE (Picture mute), FREEZE (Freeze a picture), and Geometric Correction Tool (GCT) functions. (3) (Sound) ����� Turns on or off AV-MUTE (Sound mute), play the sound and turns up or down the volume. (4) (Etc)����������� Uses “Update”, “HTTP Server”*, “Settings” and “Information”. * The HTTP Server cannot be selected when a USB cable is connected. (5) (Exit)���������� Exit Projection Utility. You can also turn off the projector at the same time. (6) (Help)����������� Displays the help of Projection Utility. 37 3. Convenient Features 9 Controlling the Projector by Using an HTTP Browser Overview The HTTP Server function provides settings and operations for: 1. Setting for wired/wireless network (NETWORK SETTINGS) To use wireless LAN connection, the optional USB Wireless LAN Unit is required. (→ page 139) 2. Setting Alert Mail (ALERT MAIL) When the projector is connected to a wired/wireless network, lamp replace time or error messages will be sent via e-mail. 3. Operating the projector Power on/off, selecting input, volume control and picture adjustments are possible. 4. Configure the settings such as PJLink PASSWORD Two ways of access to the HTTP server function are available: • Start the Web browser on the computer via the network connected to the projector and enter the following URL : <the projector’s IP address> /index.html • Use Projection Utility contained on the supplied CD-ROM. TIP: The factory setting IP address is [DHCP ON]. NOTE: • To use the projector in a network, consult with your network administrator about network settings. • The display’s or button’s response can be slowed down or operation may not be accepted depending the settings of your network. Should this happen, consult your network administrator. The projector may not respond if its buttons are repeatedly pressed in rapid intervals. Should this happen, wait a moment and repeat. If you still can’t get any response, turn off and back on the projec tor. • If the PROJECTOR NETWORK SETTINGS screen does not appear in the web browser, press the Ctrl+F5 keys to refresh your web browser (or clear the cache). • This device uses “JavaScript” and “Cookies” and the browser should be set to accept these functions. The setting method will vary depending on the version of browser. Please refer to the help files and the other information provided in your software. Preparation before Use Connect the projector to a commercially available LAN cable before engaging in browser operations. (→ page 138) Operation with a browser that uses a proxy server may not be possible depending on the type of proxy server and the setting method. Although the type of proxy server will be a factor, it is possible that items that have actually been set will not be displayed depending on the effectiveness of the cache, and the contents set from the browser may not be reflected in operation. It is recommended that a proxy server not be used unless it is unavoidable. 38 3. Convenient Features Handling of the Address for Operation via a Browser Regarding the actual address that is entered for the address or entered to the URL column when operation of the pro jector is via a browser, the host name can be used as it is when the host name corresponding to the IP address of the projector has been registered to the domain name server by a network administrator, or the host name corresponding to the IP address of the projector has been set in the “HOSTS” file of the computer being used. Example 1: When the host name of the projector has been set to “pj.ricoh.co.jp”, access is gained to the network setting by specifying pj.ricoh.co.jp/index.html for the address or the entry column of the URL. Example 2: When the IP address of the projector is “192.168.73.1”, access is gained to the network setting by specifying 192.168.73.1/index.html for the address or the entry column of the URL. PROJECTOR ADJUSTMENT POWER: This controls the power of the projector. ON ������������������������� Power is switched on. OFF ������������������������ Power is switched off. VOLUME: This controls the volume of the projector. ��������������������������� Increases the volume adjustment value. ��������������������������� Decreases the volume adjustment value. AV MUTE: This controls the mute function of the projector. PICTURE (On)�������� Mutes the video. PICTURE (Off) ������� Cancels the video muting. SOUND (On)���������� Mutes the audio. SOUND (Off)���������� Cancels the audio muting. ALL ON������������������ Mutes each of the video, and audio functions. ALL OFF ����������������� Cancels the muting of each of the video, and audio functions. 39 3. Convenient Features PICTURE: Controls the video adjustment of the projector. BRIGHTNESS  ���� Increases the brightness adjustment value. BRIGHTNESS  ���� Decreases the brightness adjustment value. CONTRAST �������� Increases the contrast adjustment value. CONTRAST �������� Decreases the contrast adjustment value. COLOR SATURATION  �� Increases the color adjustment value. COLOR SATURATION  �� Decreases the color adjustment value. TINT  ������������������ Increases the hue adjustment value. TINT  ������������������ Decreases the hue adjustment value. SHARPNESS  ����� Increases the sharpness adjustment value. SHARPNESS  ����� Decreases the sharpness adjustment value. • The functions that can be controlled will vary depending on the signal being input to the projector. (→ page 85) SOURCE SELECT: This switches the input connector of the projector. COMPUTER1 ��������� Switches to the Computer 1 In connector. COMPUTER2 ��������� Switches to the Computer 2 In connector. HDMI ��������������������� Switches to the HDMI In connector. VIDEO�������������������� Switches to the Video In connector. S-VIDEO ���������������� Switches to the S-Video In connector. VIEWER����������������� Switches to the data on the USB memory device. NETWORK ������������� Switches to a LAN signal. USB DISPLAY �������� Switches to the USB Port (PC). PROJECTOR STATUS: This displays the condition of the projector. LAMP LIFE REMAINING �����Displays the remaining life of the lamp as a percentage. LAMP TIME ������������������������Displays how many hours the lamp has been used. FILTER HOURS USED���������Displays how many hours the filter has been used. ERROR STATUS������������������Displays the status of errors occurring within the projector. LOGOFF: Logging off your projector and returning to the authentication screen (LOGON screen). 40 3. Convenient Features NETWORK SETTINGS • SETTINGS WIRED LAN or WIRELESS LAN SETTING Set for wired LAN or for wireless LAN. APPLY Apply your settings to wired LAN or wireless LAN. DHCP ON Automatically assign IP address, subnet mask, and gateway to the projector from your DHCP server. DHCP OFF Set IP address, subnet mask, and gateway to the projector assigned by your network administrator. IP ADDRESS Set your IP address of the network connected to the projector. SUBNET MASK Set your subnet mask number of the network connected to the projector. GATEWAY Set the default gateway of the network connected to the projector. WINS Set the IP address of your WINS server of the network connected to the projector when [DHCP] is turned on, this option is not available. AUTO DNS ON DHCP server will automatically assign IP address of DNS server connected to the projector. AUTO DNS OFF Set your IP address of DNS server connected to the projector. Setting for WIRED LAN PROFILE 1/PROFILE 2 Two settings can be set for wired LAN connection. Select PROFILE 1 or PROFILE 2. DISABLE Turn off wired LAN connection Setting for WIRELESS LAN (the optional Wireless LAN Unit required) EASY CONNECTION Execute a wireless LAN using EASY CONNECTION. SIMPLE ACCESS POINT Set the projector for simple access point. WPS Use WPS (Wi-Fi Protected Setup™) to set up the wireless LAN for the projector. CHANNEL Select a channel.Available channels vary depending on the country and region.When you select [INFRASTRUCTURE], make sure that the projector and your access point are on the same channel; when you select [ADHOC], make sure that the projector and your computer are on the same channel. PROFILE 1/PROFILE 2 Two settings can be set for wireless LAN connection.Select PROFILE 1 or PROFILE 2. SSID Enter an identifier (SSID) for wireless LAN. Communication can be done only with equipment whose SSID matches SSID for your wireless LAN. 41 3. Convenient Features SITE SURVEY Displays a list of available SSIDs for wireless LAN on site. Select an SSID which you can access.

COMMUNICATION MODE Select communication method when using wireless LAN. INFRASTRUCTURE: Select this option when communicating with one or more equip ment connected to the wireless LAN network via a wireless access point. ADHOC: Select this option when using the wireless LAN to directly communicate with a computer in peer-to-peer mode.

SECURITY TYPE Turn on or off the encryption mode for secure transmission. When turn on the encryp tion mode, set WEP key or encrypted key. DISABLE Will not turn on the encryption feature.Your communications may be monitored by someone. WEP 64 bit Uses 64-bit datalength for secure transmission. WEP 128 bit Uses 128-bit datalength for secure transmission. This option will increase privacy and security when compared to use of 64-bit datalength encryption.

WPA-PSK TKIP/ WPA-PSK AES/ WPA2-PSK TKIP/ WPA2-PSK AES/ WPA-EAP TKIP EAP-TLS/ WPA-EAP AES EAP-TLS/ WPA-EAP TKIP PEAP-MSCHAP v2/ WPA-EAP AES PEAP-MSCHAP v2/ WPA2-EAP TKIP EAP-TLS/ WPA2-EAP AES EAP-TLS/ WPA2-EAP TKIP PEAP-MSCHAP v2/ WPA2-EAP AES PEAP-MSCHAP v2 NOTE: These options parovide stronger security than WEP.

• The WEP settings must be the same as communication devices such as PC or access point in your wireless network. • When you use WEP, your image transmission speed will slow down. • Other encryption keys than WEP 64bit and WEP 128bit are not available when [ADHOC] is selected from [COMMUNICATION MODE]. • To install a digital certificate, use the projector’s menu. (→ page 112) INDEX Select encryption key when selecting [WEP 64 bit] or [WEP 128 bit] in [SECURITY TYPE]. KEY When selecting [WEP 64 bit] or [WEP 128 bit] in [SECURITY TYPE]: Enter WEP key. Select Characters (ASCII) Hexadecimal digit (HEX) WEP 64 bit Up to 5 characters Up to 10 characters WEP 128 bit Up to 13 characters Up to 26 characters When selecting [WPA PSK-TKIP], [WPA PSK-AES], [WPA2 PSK-TKIP] or [WPA2 PSK-AES]: Enter encryption key. Key length must be 8 or greater and 63 or less. USERNAME Set a user name for WPA-EAP/WPA2-EAP. PASSWORD Set a password forWPA-EAPTKIP PEAP-MSCHAP v2/WPA-EAPAES PEAP-MSCHAP v2/WPA2-EAP TKIP PEAP-MSCHAP v2/WPA2-EAP AES PEAP-MSCHAP v2.

USE DIGITAL CERTIFI CATE Select this if you use a digital certificate for WPA-EAP TKIP PEAP-MSCHAP v2/WPA EAP AES PEAP-MSCHAP v2/WPA2-EAP TKIP PEAP-MSCHAP v2/WPA2-EAP AES PEAP-MSCHAP v2.

42 3. Convenient Features • NAME PROJECTOR NAME Enter a name for your projector so that your computer can identify the projector. A projector name must be 16 characters or less. TIP: Projector name will not be affected even when [RESET] is done from the menu. HOST NAME Enter the hostname of the network connected to the projector. A host name must be 15 or less. DOMAIN NAME Enter the domain name of the network connected to the projector. A domain name must be 60 characters or less. • ALERT MAIL ALERT MAIL This option will notify your computer of lamp replace time or error messages via e-mail when using wireless or wired LAN. Placing a checkmark will turn on the Alert Mail feature. Clearing a checkmark will turn off the Alert Mail feature. Sample of a message to be sent from the projector: The lamp and filters are at the end of its usable life. Please replace the lamp and filters. Projector Name: Ricoh Projector Lamp Hours Used: 100 [H] SENDER’S ADDRESS Enter sender’s address. SMTP SERVER NAME Enter the SMTP server name to be connected to the projector.

RECIPIENT’S ADDRESS 1,2,3 Enter your recipient’s address. Up to three addresses can be entered.

TEST MAIL Send a test mail to check whether your settings are correct or not NOTE: • If you execute a test, you may not receive an Alert mail. Should this happen, check if network settings are correct. • If you entered an incorrect address in a test, you may not receive an Alert mail. Should this happen, check if the Recipient’s Address is correct. SAVE Click this button to save your settings to the projector’s memory. 43 3. Convenient Features • NETWORK SERVICE PJLink PASSWORD Set a password for PJLink*. A password must be 32 characters or less. Do not forget your password. However, if you forget your password, consult with your dealer. HTTP PASSWORD Set a password for HTTP server. A password must be 10 characters or less. NOTE: If you forget your password, contact your dealer. *What is PJLink? PJLink is a standardization of protocol used for controlling projectors of different manufacturers.This standard pro tocol is established by Japan Business Machine and Information System Industries Association (JBMIA) in 2005. The projector supports all the commands of PJLink Class 1. Setting of PJLink will not be affected even when [RESET] is done from the menu. • CRESTRON DISABLE Disables Crestron Control™. ENABLE Enables Crestron Control. IP ADDRESS Set your IP address of Crestron server. IP ID Set your IP ID of Crestron server. • INFORMATION WIRED LAN Display a list of settings of wired LAN connection. WIRELESS LAN Display a list of settings of wireless LAN connection. UPDATE Reflect settings when they are changed. 44 3. Convenient Features  Projecting Your Computer’s Screen Image from the Projector via a Network [NETWORK PROJECTOR] By selecting the projector connected to the same network as that of your PC, the PC screen image can be projected to the screen via network. There is no need of connection using the computer cable (VGA). Operation Environment Applicable OS Windows 7 Professional Windows 7 Ultimate Windows 7 Enterprise Windows Vista Home Premium Windows Vista Business Windows Vista Ultimate Windows Vista Enterprise Hardware specifications The specifications recommended by Microsoft as the operation environment for Windows 7/Windows Vista should be satisfied. Network Environment Wired LAN or wireless LAN environment that supports TCP/IP is required. Screen color High Color (16 bits) True Color (24 bits and 32 bits) * Setting with 256 colors or less is not available. Setting the Projector to Network Projector Input Mode 1. With the projector turned on, press the Input button. The input selection window appears. Another way to display the input selection window is to press the Network button on the remote control. The AP PLICATION MENU screen will be displayed. Go to step 3. 45 3. Convenient Features 2. Press the SELECT  or  button to select [NETWORK] and press the Enter button. In the screen, the [APPLICATION MENU] menu is displayed. 3. From the [APPLICATION MENU] menu, select [NETWORK PROJECTOR]. The [PROJECTOR NAME/DISPLAY RESOLUTION/PASSWORD/URL] will be displayed. 46 3. Convenient Features Projecting the Image with Network Projector Windows 7 / Vista 1. Click [Start] from the desktop of Windows 7. 2. Click [All Programs]. 3. Click [Accessories]. 4. Click [Connect to a Network Projector]. When the [Windows Firewall is blocking the network projector from communicating with your computer] window appears,click [Allow the network projector to communicate with my computer]. The “Connect to a Network Projector” window appears. 5. Click [→ Search for a projector (recommended)]. In the “Available projectors” box, “X5360N/WX5350N” is displayed. 6. Click [X5360N/WX5350N]. The message “Enter the password for the projector that you selected.” is displayed at the bottom of the window. 47 3. Convenient Features 7. Input the password to the password input box displayed by the operation at step 3 on page 46. 8. Click [Connect]. The network projector function works and the screen of Windows 7 is projected from the projector. • If the resolution of your computer’s screen is different from the projector’s screen resolution, the NETWORK PROJECTOR function may not work. If this happens, change the resolution of the computer’s screen to lower resolution than the one displayed at Step 3 on page 46. NOTE: When the network projector function works, the background color of the desktop changes to black. When the network projector function is stopped, the original background color is restored. Reference: If the projector cannot be found at Step 5, click [ → Enter the projector network address]. Then, input the “Network address” (Input example: 10.32.97.61/lan) and “Projector password” (Input example: 82291627) displayed in the screen projected from the projector. Exiting the Network Projector Operation 1. Click [Projecting: X5360N/WX5350N] in the Windows Vista task bar. 2. Click [Disconnect]. The Network Projector function is stopped. 3. Press the Input button of the projector to select an input terminal other than [NETWORK]. When using the remote control, press a button other than the Network button. 48 3. Convenient Features  Using the Projector to Operate Your Computer via a Network [REMOTE DESKTOP] • By selecting the PC connected to the same network as that of the projector, the PC screen image can be projected to the screen via network. Then, by operating the keyboard, you can operate Windows 7, Windows Vista or Windows XP on the PC connected with the network. • With the Remote Desktop function, you can remotely operate the PC placed at a distance from the projector. Meeting room Office NOTE: • The [REMOTE DESKTOP] function will work on the following Windows editions. Windows 7 Professional Windows 7 Ultimate Windows 7 Enterprise Windows Vista Business Windows Vista Ultimate Windows Vista Enterprise Windows XP Professional with Service Pack 3 (Note) • In this user’s manual this feature is described using Windows 7 as an example, but Windows Vista and Windows XP Professional Service Pack 2 or later will also work with this feature. • A keyboard is required to use the Remote Desktop function. • The Remote Desktop function can be operated with a keyboard. Using a wireless mouse with a wireless keyboard is more useful for operating. Use a commercially available wireless keyboard, a wireless mouse, and a USB wireless receiver. Use a commercially available USB keyboard and USB mouse. • A USB keyboard with a built-in USB hub cannot be used with the projector. • A wireless keyboard or mouse that supports Bluetooth cannot be used with the projector. • We do not warrant that the USB port of the projector will support all USB devices in the market. Prepare a commercially available wireless keyboard (US layout version). Connect the USB wireless receiver to the USB port (Type A) of the projector. Make all necessary settings for your wireless keyboard and mouse. 49 3. Convenient Features Setting the password to the user account of Windows 7 TIP: If a password has been set for an account, the steps 1 to 9 can be skipped. 1. Click [Start] from the desktop of Windows 7. 2. Click [Control Panel]. 3. Click [Add or remove user accounts] displayed under [User Accounts and Family Safety]. 4. When the [User Account Control] confirmation window appears, click [Yes]. 5. Click [Administrator]. 6. Click [Create a password]. 7. Input the password to the [New password] box. 8. Input the same password as that at Step 7 to the [Confirm new password] box. 9. Click [Create a password]. The Administrator is changed to [Password protected]. Setting the Remote Access 1. Click [Start] from the desktop of Windows 7. 2. Click [Control Panel]. 3. Click [System and Security]. 4. Click [Allow remote access] displayed under [System]. 5. When the [User Account Control] confirmation window appears, click [Yes]. The [System Properties] window appears. 6. Click [Allow connections from computers running any version of Remote Desktop (less secure)] in the Remote Desktop box and click [OK]. Checking the IP address on Windows 7 1. Click [Start] from the desktop of Windows 7. 2. Click [Control Panel]. 3. Click [View network status and tasks] displayed under [Network and Internet]. 50 3. Convenient Features 4. Click [Local Area Connection] displayed in blue on the right of [Connections] in the window. The [Local Area Connection Status] window appears. 5. Click [Details...]. Write down the value for “IPv4 Address” (xxx.xxx.xxx.xxx) displayed. 6. Click [Close]. 7. Click [X] at the upper right of the window. The system goes back to the desktop. Starting the Remote Desktop 1. With the projector turned on, press the Input button. The input selection window appears. Another way to display the input selection window is to press the Network button on the remote control. The NET WORK screen will be displayed. Go to step 3. 51 3. Convenient Features 2. Press the SELECT  or  button to select [NETWORK] and press the Enter button. The [NETWORK] menu will be displayed. 3. From the [NETWORK] menu, use the wireless keyboard to select [REMOTE DESKTOP CONNECTION]. The [REMOTE DESKTOP CONNECTION] window appears. 4. Operate the wireless keyboard to input the IP address of Windows 7 and click “CONNECTION”. The log-on screen of Windows 7 is displayed in the screen projected by the projector. 5. Operate the wireless keyboard to input the user’s password and press “Enter”. The remote desktop function is started. Windows 7 desktop is displayed in the screen projected by the projector. Log out the computer. Use the wireless keyboard connected to the projector to operate Windows 7. NOTE: When the projection is made with the remote desktop function, the background color of the desktop is changed to black. 52 3. Convenient Features Exiting the Remote Desktop 1. Operate the wireless keyboard to click [Start] from the desktop screen projected by the projector. 2. Click [X] on the right of the start menu. The remote desktop function is stopped. 3. Press the Input button of the projector to select an input terminal other than [NETWORK]. When using the remote control, press a button other than the Network button. TIP: Setting [ADVANCED] in REMOTE DESKTOP Clicking [ADVANCED] displays the [ADVANCED] screen. Making settings to [ADVANCED] will allow you to display the desktop background, or to enable the window animation function during the Remote Desktop operation. However, doing this will cause the display’s or mouse’s response to slow down. If the display’s or mouse’s response is slowed down, try one or more of the following: DESKTOP BACKGROUND: Clear the check mark to display the desktop background in monochrome. MENU AND WINDOW ANIMATION: Clear the check mark to disable menu and window animation. THEMES: Clear the check mark not to use Themes. SHOW CONTENTS OF WINDOW WHILE DRAGGING: Clear the check mark to show only the window pane while dragging. 53 4. Using the Viewer 1 What you can do with the Viewer The Viewer feature allows you to view slides or movie files stored on a USB memory on the projector, or a shared folder in a computer connected to the network. The Viewer has the following features. • When a commercially available USB memory that stores image files is inserted into the USB port (Type A) of the projector, the Viewer allows you to view the image files on the USB memory. Even if no computer is available, presentations can be conducted simply with the projector. • Movie file with audio can be played back. • Image and movie files stored in a shared folder in a computer connected to a network can be projected. The computer with “Media Sharing” of Windows Media Player 11 turned on can be used as a media server. Supported graphic formats Format File name extension JPEG .jpg, .jpe, .jpeg (CMYK is not supported.) BMP .bmp (bit field not supported) PNG .png (Interlaced PNG and α channel PNG are not supported.) GIF .gif (Interlaced GIF, transparation GIF, and animation GIF are not supported.) * If an unsupported image is selected, the icon will be displayed. NOTE: Maximum number of pixels of image which can be displayed are: • Progressive JPEG: 1280 × 1280 • GIF: 1280 × 1280 • Others: 4000 × 4000 Supported movie files File name extension Video compression/expansion method Audio compression/expansion method .mpg, .mpeg. MPEG2 MPEG Audio Layer2 MPEG Audio Layer3 .wmv VC-1/WMV9 WMA9 Standard .mp4 H.264/AVC AAC-LC Playback requirements: Resolution: 320 × 240 to 1280 × 720 Video frame rate: up to 30fps Bitrate: up to 15Mbps Audio sampling rate: up to 48kHz Channel: up to 2ch stereo Audio bit rate: up to 256 Kbps Max. file size: up to 2GB 54 4. Using the Viewer NOTE: • Movie files converted by using the video/audio format which is not supported by this projector cannot be played back. In this case, there will be no icon to show that playback is not possible. • Files with Digital Rights Management(DRM) protection cannot be played back. • Some of the movie files that meet the above requirements may not be played back. • WMV format video file will be displayed in an aspect ratio of 1 to 1 independently of its original aspect ratio. • Files that can be played back on the media server are graphics and movie files. In Windows Media Player 11 (Windows XP/ Windows Vista) mp4 files cannot be played back. Supported USB memory devices - Be sure to use a USB memory device formatted with the FAT, exFAT, FAT32 or FAT16 file system. The projector does not support NTFS formatted USB memory. If the projector does not recognize your USB memory, check if the format is supported. To format your USB memory in your computer, refer to the document or help file that comes with your Windows. - We do not warrant that the USB port of the projector will support all USB memories in the market. 55 4. Using the Viewer Notices on shared folder and media server • Files from a shared folder or media server may not be projected if security or antivirus software is installed on your computer. • Open the following firewall ports: - Media server Port number Protocol 1900 UDP 2869 TCP 10243 TCP 10280-10284 UDP - Shared folder Port number Protocol 137 UDP/TCP 138 UDP/TCP 139 UDP/TCP 445 UDP/TCP • Set your computer for sharing and security to grant access to files in the shared folder and set your security or antivirus software to grant access to files in the shared folder. Consult your network administrator for more informa tion. • Movie files in the shared folder or the media server may not be played back correctly depending on your network environment or the bit rate of your file. NOTE • The following operations by using the buttons on the projector are not possible when the VIEWER screen such as the slide screen and the thumbnail screen is displayed. - Keystone correction by using the ▲ or ▼ button - Auto Adjustment by using the Auto Set button - Volume control with the ◀ or ▶ button • Freezing picture by using the FREEZE, ASPECT, or Auto Set button on the remote control is not possible when the VIEWER screen such as the slide screen and the thumbnail screen is displayed. • Executing [RESET] → [ALL DATA] from the menu will return the settings for the Viewer toolbar to the factory default. 56 4. Using the Viewer 2 Preparing presentation materials 1. Create your presentation materials and save them in a supported file format to your computer. 2. Save a file to your drive. To save a file to your USB memory: Use the Windows Explore to copy the file to your USB memory. To place a file in a shared folder you create in your computer, see page 69. To use “Media Sharing” in Windows Media Player 11, see page 73. 57 4. Using the Viewer 3 Projecting images stored in a USB memory device This section explains the basic operation of the Viewer. The explanation provides the operational procedure when the Viewer toolbar is set to the factory default. Preparation: Before starting the Viewer, store images to the USB memory using your computer. Starting the Viewer 1. Turn on the projector. (→ page 14) 2. Insert the USB memory into the USB port of the projec tor. NOTE: • Do not remove the USB memory from the projector while it’s LED flashes. Doing so may corrupt the data. TIP: You can a USB memory insert the projector when the drive list screen is displayed. 3. Press the Input button to select [VIEWER]. A press of the Input button will display the source select screen. A few more presses of the Input button will display the drive list screen. Another way to select [VIEWER] is to press the Viewer but ton on the remote control. TIP: • For more information about the drive list screen, see page 61. • To display graphics in a shared folder, see page 69; to display still images or movie files in a media server, see page 73. 58 4. Using the Viewer 4. Press the ▶ button to select “USB1” and press the Enter button. The “USB1” thumbnail screen will be displayed. TIP: • For more information about thumbnail screen, see page 63. 5. Use the ▲▼◀ or ▶ button to select an icon. • The → (arrow) symbol on the right indicates there are more pages. Pressing the Page ▽ (page down) button will show the next page: pressing the Page △ (page up) will show the previous page. 6. Press the Enter button. Operation varies depending on the selected file. • Still image The selected slide will be displayed. The ◀ or ▶ button can be used to select the next (right) slide or the previous (left) slide in the thumbnail screen. • Pressing the Enter button will display the control bar with which is used to select or rotate an slide.(→ page 64) 59

• Movie file The movie file will start playing. After finishing the playback, the screen will turn to black. Press the Back button to return to the thumbnail screen. • Pressing the Enter button will display the movie’s control bar with which you can pause or fastforward and some other operations. 7. Remove the USB memory from the projector. Return to the drive list screen. Make sure that the LED on the USB memory is not flashing before removing the USB memory. NOTE: If you remove the USB memory from the projector with a slide displayed, the projector may not operate correctly. If this happens, turn off the projector and unplug the power cord. Wait 3 minutes, then connect the power cord, and turn on the projector. Exiting the Viewer 1. Press the Input button to select a source other than [VIEWER]. A press of the Input button will display the source select screen. A few more presses of the Input button will display another source. • To exit the Viewer using the remote control, select a source other than [VIEWER]. 4. Using the Viewer

60 4. Using the Viewer Names and functions of Viewer screen The Viewer has three screens: Drive list screen, Thumbnail screen, and Slide screen. Cursor (yellow) Menu Menu Scroll bar Cursor (yellow) Folder icon [Drive list screen] [Thumbnail screen] Path information Drive information/File information Menu guide Operation button guide

[Slide screen] • Drive list screen Displays a list of drives connected to the projector. Menu operation Control bar * The operation for still image differs from that for movie.

• Use the ▼ or ▲ button to move the cursor up or down. Select the menu item and press the Enter button to display the submenu. Operation for Drive list screen 1. Press the ▶ button to move the cursor to the drive list. (Use the ◀ or ▶ button to switch between the menu and the drive list.) Press the ▼ or ▲ button to select a type of drive; press the ◀ or ▶ button to select the drive connected to the projector. 2. Select the drive and press the Enter button to switch to the thumbnail screen of the selected drive. 61 4. Using the Viewer Functions Name Description REFRESH Displays additional media servers in the drive list screen. OPTIONS Opens the OPTIONS menu. SLIDE SETTING Sets up slides. (→ page 66) MOVIE SETTING Sets up movie files. (→ page 67) AUTO PLAY SETTING Sets up auto play. (→ page 67) SHARED FOLDER Sets up a shared folder. (→ page 69) MEDIA SERVER Sets up a media server. (→ page 73) RETURN Closes the OPTIONS menu. SYSTEM SETTING Switches to the system setting menu. See wired LAN, wireless LAN, WPS, network information, mouse, and keyboard in "9 Application Menu". (→ page 105) USB Displays the icon for a USB memory inserted into the USB port of the projector. SHARED FOLDER Displays up to four drives of a computer connected to a LAN (set for con necting a shared folder). * See page 69 for setting up for connecting a shared folder of the projector. MEDIA SERVER Displays up to four drives of a computer connected to a LAN (set for con necting a media server). * See page 73 for setting up for connecting a media server of the projector Path information Displays the location of a folder or file. Drive information [Example] USB1 314MB FREE/492MB Displays the drive. Displays free space and capcity of a drive. (USB only) Menu guide Displays the description of a selected menu. Operation button guide Displays information about operation buttons. * It is displayed in three-digit number (rounding up) NOTE: When the OPTIONS menu is displayed, the drive list screen or thumbnail screen is not displayed. To display it, select the [RETURN] icon and press the Enter button. 62 4. Using the Viewer • Thumbnail screen Displays a list of folders, thumbnails, and icons in the drive selected on the drive list screen. Menu operation • Use the ▼ or ▲ button to move the cursor up or down. Select the menu item and press the Enter button to display the menu or setting screen. Operation for Thumbnail screen 1. Press the ▶ button to move the cursor to the thumbnail screen when the OPTIONS menu is not displayed. 2. Press the ▼, ▲, ◀, or ▶ button to select a file or folder. 3. Press the Enter button to start slideshow or playback of the selected file. Selecting a folder will display its thumbnail screen. Functions Name Description UP Goes to one upper level menu. THUMBNAIL Switches two displays between thumbnail and icon. SORT SETTING Rearranges folders or files. DRIVE LIST Returns to the drive list screen. OPTIONS Changes to the OPTIONS menu.

SYSTEM SET TING Opens the system setting menu.

Scroll bar Thumbnail screen will display 12 files with 4 by 3. If the thumbnail screen has twelve or more files or folders, the scroll bar will be displayed at the right side. Using the Page ▼ or Page ▲ button will scroll the whole screen down or up. Path information Displays the location of a folder or file. Thumbnail information [Example] 005.jpg 5/200 11/03/2010 13:25:12 502KB

Selected folder name or file name Numbers and order of files in a folder (only when folder selected) Create/Change date: M/D/Y/H/M/B Displays file capacity

Menu guide Displays the description of a selected menu. Operation button guide Displays information about operation buttons. TIP: • If an unsupported image is selected, the icon [?] will be displayed, • The maximum displayable number of images is 300 in the thumbnail screen including the number of folders. • If a file name or path of a folder is longer than specified, it will be displayed with center characters or path skipped. Example: “123456789.jpg” will be displayed in “123..789.jpg”. 63 4. Using the Viewer • Slide screen (still image/movie) Plays a file selected from a list of thumbnails or icons. Control bar operation • The control bar will be displayed only when a still image and a movie file is selected. • The control bar for still images differs from that for movie files. 1. Pressing the Enter button in Slide screen will display the control bar at the bottom of the screen. 2. Use the ◀ or ▶ button to select a file and press the Enter button. • The selected function will be executed. Functions of still image control bar Name Description PREV Goes back to the previous image PLAY Plays the image. This button also is used to stop or start playing an image. NEXT Goes to the next image. RIGHT Rotates the image 90° clockwise. • To cancel, select another folder. LEFT Rotates the image 90° counter clockwise. • To cancel, select another folder. SIZE BEST FIT Displays the image with its aspect ratio in the projector’s displayable maximum resolution.

ACTUAL SIZE Displays the image in its actual size.

CLOSE Closes the control bar. • You can also press the Back button to close the control bar. END Stops playing slides or slideshow, and closes the control bar to return to the thumbnail screen. 64 4. Using the Viewer Functions of movie control bar Name Description PREV Goes back to the beginning of a movie file. • Goes back to the beginning of the previous movie file if executed immediately after being started playing. FR Fast-rewinds a movie file for about 7 seconds. PLAY/PAUSE PLAY Plays a movie file. PAUSE Stops playing a movie file. FF Fast-forwards a movie file for about 7 seconds. NEXT Goes to the beginning of a next movie file. TIME Displays an elapsed time for playback or pause. SIZE BEST FIT Displays the image with its aspect ratio in the projector’s displayable maximum resolution.

ACTUAL SIZE Displays the image in its actual size.

CLOSE Closes the control bar. • You can also press the Back button to close the control bar. END Stops playing a movie, and closes the control bar to return to the thumbnail screen. 65 4. Using the Viewer Viewer option settings • SLIDE SETTING Sets still images or slides. Name Options Description SCREEN SIZE BEST FIT Displays the image with its aspect ratio in the projector’s display able maximum resolution. ACTUAL SIZE Displays the image in its actual size. PLAY MODE MANUAL Selects manual play. AUTO Selects auto play. DISPLAY INTERVAL 5 - 300 seconds Specifies interval time when [AUTO] is selected for PLAY MODE. REPEAT Check mark Turns on or off the repeat function. TIP • To play one or more slides, place those files into a folder. 66


FREE ENGLISH PDF

OPERATING INSTRUCTIONS

USER GUIDE - USER MANUAL

OWNER GUIDE - OWNER MANUAL

REFERENCE GUIDE - REFERENCE MANUAL

INSTRUCTION GUIDE - INSTRUCTION MANUAL

Leave a Reply