Free English PYLE PDIC1661RD (02) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD PYLE PDIC1661RD (02) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What are the technical specifications for the PYLE PDIC1661RD?
| Feature | Specification |
|---|---|
| Speaker Size | (2) 6.5-inch Speakers |
| MAX Power Output | 200 Watt |
| Sensitivity | 88 dB |
| Frequency Response | 70Hz-20kHz |
| Total Unit Dimensions (Diameter x Depth) | 9.0 inch x 3.1 inch |
| Cutout Diameter | 7.6 inch |
| Cutout Mounting Depth | 2.8 inch |
| Single Speaker Weight | 6.6 lbs. |
| Both Speaker Weight | 13.7 lbs. |
What are the key features of the PYLE PDIC1661RD?
The PYLE PDIC1661RD includes the following features:
In-Wall / In-Ceiling System
Quick Connect Spring-Loaded Speaker Terminals
1/2 inch High Compliance Polymer Tweeter
Polypropylene Cone with Rubber Edge
Cut-Out Size Template for Easy Installation
Environmentally Friendly ABS Construction
Perfect for Custom Installations and Applications
Includes Stain Resistant Grills
Impedance: 16 Ohms
How do I install the PYLE PDIC1661RD in my ceiling?
Step 1. Cut the drywall using the included cut-out size template. Note: Always allow at least one-half inch between a wall stud and the speaker cutout, or the locking tabs will not be able to swivel into place.
Step 2. Connect the speaker wires to the PYLE PDIC1661RD terminals.
Step 3. Screw down each of the four Phillips head screws. The locking tabs will swivel into place and secure the unit to the rear surface of the drywall.
Step 4. Put in the strips of adhesive to secure the grille.
Step 5. Replace the metal grille to complete the installation.
What safety precautions should I be aware of regarding the PYLE PDIC1661RD?
This product can expose you to chemicals, which is known to the state of California to cause cancer birth defects and other reproductive harm. Do not ingest.
CLICK HERE TO DOWNLOAD PYLE PDIC1661RD (02) PDF DOCUMENT