PRO-FORM ENDURANCE 1520 E PFEL51517.1 (01) PDF MANUAL


Post questions, comments, reviews or errors in the comment box below.

Your File is Ready … Download PDF

CLICK HERE TO DOWNLOAD PRO-FORM ENDURANCE 1520 E PFEL51517.1 (01) PDF MANUAL


PDF Content Summary: proform.com Model No. PFEL51517.1 Serial No. USER’S MANUAL Write the serial number in the space above for reference. Serial Number Decal ACTIVATE YOUR WARRANTY To register your product and activate your warranty today, go to my.proform.com. CUSTOMER CARE For service at any time, go to proformservice.com. Or call 1-888-533-1333 Mon.–Fri. 6 a.m.–6 p.m. MT Sat. 8 a.m.–12 p.m. MT Please do not contact the store. CAUTION Read all precautions and instructions in this manual before using this equipment. Keep this manual for future reference.

TABLE OF CONTENTS WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 PART IDENTIFICATION CHART. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 THE CHEST HEART RATE MONITOR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 HOW TO USE THE ELLIPTICAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 FCC INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 MAINTENANCE AND TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 EXERCISE GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 PART LIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 EXPLODED DRAWING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34 ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover LIMITED WARRANTY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover WARNING DECAL PLACEMENT This drawing shows the location(s) of the warning decal(s). If a decal is missing or illegible, see the front cover of this manual and request a free replacement decal. Apply the decal in the location shown. Note: The decal(s) may not be shown at actual size. PROFORM and IFIT are registered trademarks of ICON Health & Fitness, Inc. The BLUETOOTH® word mark and logos are registered trademarks of Bluetooth SIG, Inc. and are used under license. Google Maps is a trade- mark of Google LLC. Wi-Fi is a registered trademark of Wi-Fi Alliance. WPA and WPA2 are trademarks of Wi-Fi Alliance. 2 IMPORTANT PRECAUTIONS WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read all important precautions and instructions in this manual and all warnings on your elliptical before using your elliptical. ICON assumes no responsibility for personal injury or property damage sus- tained by or through the use of this product.

1. It is the responsibility of the owner to ensure that all users of the elliptical are adequately informed of all precautions. 2. Before beginning any exercise program, consult your physician. This is especially important for persons over age 35 or persons with pre-existing health problems. 3. The elliptical is not intended for use by persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge, unless they are given supervi- sion or instruction about use of the elliptical by someone responsible for their safety. 4. Use the elliptical only as described in this manual. 5. The elliptical is intended for home use only. Do not use the elliptical in a commercial, rental, or institutional setting. 6. Keep the elliptical indoors, away from moisture and dust. Do not put the elliptical in a garage or covered patio, or near water. 7. Place the elliptical on a level surface, with at least 3 ft. (0.9 m) of clearance in the front and rear of the elliptical and 2 ft. (0.6 m) on each side. To protect the floor or carpet from dam- age, place a mat under the elliptical. 8. Inspect and properly tighten all parts each time the elliptical is used. Replace any worn parts immediately. 9. Keep children under age 13 and pets away from the elliptical at all times. 10. When connecting the power cord (see page 14), plug the power cord into a grounded circuit. 11. Do not modify the power cord or use an adapter to connect the power cord to an improper receptacle. Keep the power cord away from heated surfaces. Do not use an extension cord. 12. Do not operate the elliptical if the power cord or plug is damaged, or if the elliptical is not working properly. 13. DANGER: Always unplug the power cord and switch the power switch to the off position when the elliptical is not in use and before cleaning the elliptical. Servicing other than the procedures in this manual should be performed by an authorized service repre- sentative only. 14. The elliptical should not be used by persons weighing more than 375 lbs. (170 kg). 15. Wear appropriate clothes while exercising; do not wear loose clothes that could become caught on the elliptical. Always wear athletic shoes for foot protection while exercising. 16. Hold the handlebars or the upper body arms when mounting, dismounting, or using the elliptical. 17. The heart rate monitor is not a medical device. Various factors may affect the accu- racy of heart rate readings. The heart rate monitor is intended only as an exercise aid in determining heart rate trends in general. 3 18. The elliptical does not have a freewheel; the pedals will continue to move until the fly- wheel stops. Reduce your pedaling speed in a controlled way. 19. Keep your back straight while using the elliptical; do not arch your back. 20. Over exercising may result in serious injury or death. If you feel faint, if you become short of breath, or if you experience pain while exercising, stop immediately and cool down.

SAVE THESE INSTRUCTIONS 4

5UTS STANDARD SERVICE PLANS all Thank you for selecting the revolutionary PROFORM® ENDURANCE 1520 E elliptical. The ENDURANCE 1520 E elliptical provides an impressive selection of features designed to make your workouts at home more effective and enjoyable. For your benefit, read this manual carefully before you use the elliptical. If you have questions after BEFORE YOU BEGIN Tablet Holder Upper Body Arm reading this manual, please see the front cover of this manual. To help us assist you, note the product model number and serial number before contacting us. The model number and the location of the serial number decal are shown on the front cover of this manual. Before reading further, please familiarize yourself with the parts that are labeled in the drawing below. Heart Rate Monitor Handlebar Accessory Tray Fan

Pedal Wheel Pedal Handle Roller Ramp

Handle Length: 6 ft. 8 in. (203 cm) Width: 2 ft. 5 in. (74 cm) 6 Console

PART IDENTIFICATION CHART Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it has been preassembled. Extra parts may be included. Tablet M10 Locknut Holder (99)–4 Screw (152)–4 M4 x 16mm M10 x 20mm Screw (104)–4 Screw (144)–12 M10 x 45mm Bolt (143)–4 M10 x 70mm Screw (139)–2 M10 x 75mm Screw (142)–2 7 ASSEMBLY • To hire an authorized service technician to assemble this product, call 1-800-445-2480. • Assembly requires two persons. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you complete all assembly steps. • Left parts are marked “L” or “Left” and right parts are marked “R” or “Right.” 1. Go to my.proform.com on your computer and register your product. 1 • documents your ownership • activates your warranty • ensures priority customer support if assistance is ever needed Note: If you do not have internet access, call Customer Care (see the front cover of this manual) and register your product. 2. With the help of a second person, place some of the packing materials (not shown) under the rear of the Frame (1). Have the second person hold the Frame to prevent it from tipping while you complete this step. Identify the two Rear Stabilizers (5). Attach one of the Rear Stabilizers (5) to the Frame (1) with three M10 x 20mm Screws (144); start all of the Screws, and then tighten them. Attach the other Rear Stabilizer (5) in the same way. 2 • To identify small parts, see page 7. • In addition to the included tool(s), assembly requires the following tools: one Phillips screwdriver one adjustable wrench Assembly may be easier if you have your own set of wrenches. To avoid damaging parts, do not use power tools. 5 Then, remove the packing materials from under the Frame (1). 144 8 144 5 1

3. Orient the Rear Stabilizer Cover (2) as shown, and press it onto the Frame (1). Attach the Rear Stabilizer Cover (2) with two M4 x 16mm Screws (104). 3 104 2 104 1 4. With the help of a second person, place some of the packing materials (not shown) under the front 4 of the Frame (1). Have the second person hold the Frame to prevent it from tipping while you complete this step. Leave the packing materi- als in place until you complete step 5. Identify the Right Front Stabilizer (6). Attach the Right Front Stabilizer (6) to the Frame (1) with three M10 x 20mm Screws (144); start all of the Screws, and then tighten them. Attach the Left Front Stabilizer (not shown) in the same way. 9 1 1446

5. Orient the Front Stabilizer Cover (8) as shown, and route the Power Cord (not shown) over 5 the top of the Front Stabilizer Cover. Then, 8 press the Front Stabilizer Cover onto the Frame (1). 104 Attach the Front Stabilizer Cover (8) with two M4 x 16mm Screws (104). Then, remove the packing materials from under the Frame (1). 16. Raise the Upright (4) to the vertical position. Secure the Upright with two M10 x 75mm 6 Screws (142). Then, slide the Shield Cover (56) downward onto the Rear Shield (75). 4 142 75 1056

117. Locate the Right Upper Saddle Bracket (121) on the Right Roller Arm (45). Next, locate the Lower 7 Saddle Bracket (26) on the right side of the elliptical. Attach the Right Upper Saddle Bracket (121) to the Lower Saddle Bracket (26) with two M10 x 70mm Screws (139). 139 12145 26 8. Identify the Right Upper Body Arm (61) and an Upper Body Arm Cover (77). Slide the Upper 8 Body Arm Cover onto the Right Upper Body Arm as shown. Next, attach the Right Upper Body Arm (61) to the Right Upper Body Leg (36) with two M10 x 45mm Bolts (143) and two M10 Locknuts (99); make sure that the Locknuts are in the hexagonal holes (A). Then, slide the Upper Body Arm Cover (77) downward and turn it so that it is flush with the Right Upper Body Leg (36). Attach the Left Upper Body Arm (47) in the same way. 47 61 77 99 143 A 99 36 9. Attach the Tablet Holder (151) to the Console (7) with four Tablet Holder Screws (152); start all of the Tablet Holder Screws, and then tighten them. 9 7 151 151 152

10. Make sure that all parts are properly tightened before you use the elliptical. Extra parts may be included. Place a mat beneath the elliptical to protect the floor. 12 THE CHEST HEART RATE MONITOR HOW TO PUT ON THE HEART RATE MONITOR If the heart rate monitor looks like the one shown in drawing 1, press the transmitter (A) onto the snap fasteners on the chest strap (B). If the heart rate monitor looks like the one shown in drawing 2, insert the tab (C) on one end of the chest strap (D) into one end of the transmitter (E). Then, press the end of the transmitter under the buckle (F) on the chest strap; the tab should be flush with the transmitter. Next, wrap the heart rate monitor around your chest in the loca- tion shown; the heart rate monitor must be under your clothes, tight against your skin. Make sure that the logo is right-side-up. Then, attach the other end of the chest strap. Adjust the length of the chest strap, if necessary. Next, pull the trans- mitter and the chest strap away from your body a few inches and locate the two electrode areas (G). Using saliva or con- tact lens solution, wet the electrode areas. Then, return the transmitter and the chest strap to a position against your chest. CARE AND MAINTENANCE • Thoroughly dry the electrode areas with a soft towel after each use. Moisture may keep the heart rate monitor activated, shortening the life of the battery. • Store the heart rate monitor in a warm, dry place. Do not store the heart rate monitor in a plastic bag or other container that may trap moisture. • Do not expose the heart rate monitor to direct sunlight for extended periods of time, and do not expose it to temperatures above 122°F (50°C) or below 14°F (-10°C). • Do not excessively bend or stretch the heart rate monitor when using or storing it. 1 2 • To clean the transmitter, use a damp cloth and a small amount of mild soap. Then, wipe the transmit- ter with a damp cloth and thoroughly dry it with a soft towel. Never use alcohol, abrasives, or chemicals A to clean the transmitter. Hand wash and air dry the chest strap. TROUBLESHOOTING • If the heart rate monitor does not function when positioned as described at the left, move it slightly lower or higher on your chest. • If heart rate readings are not displayed until you begin perspiring, re-wet the electrode areas. • For the console to display heart rate readings, you must be within arm’s length of the console. • If there is a battery cover on the back of the trans- mitter, replace the battery with a new battery of the same type. • The heart rate monitor is designed to work with people who have normal heart rhythms. Heart rate reading problems may be caused by medical condi- tions such as premature ventricular contractions (pvcs), tachycardia bursts, and arrhythmia. • The operation of the heart rate monitor can be affected by magnetic interference from high power lines or other sources. If you suspect that magnetic interference is causing a problem, try relocating the fitness equipment. C D B E F G 13 HOW TO USE THE ELLIPTICAL

HOW TO PLUG IN THE POWER CORD This product must be grounded. If it should mal- function or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. The power cord has a plug with a grounding pin. DANGER: Improper connection of the power cord increases the risk of electric shock. Do not modify the plug; if it will not fit an outlet, have a proper outlet installed by a qualified electrician. If you are unsure whether the product is properly grounded, contact a qualified electrician. 2-pole Receptacle Adapter LugMetal Screw A temporary adapter may be used to con- nect the power cord to a 2-pole receptacle as shown at the right if a prop- erly grounded outlet is not available. A temporary adapter may be used to con- nect the power cord to a 2-pole receptacle as shown at the right if a prop- erly grounded outlet is not available. A temporary adapter may be used to con- nect the power cord to a 2-pole receptacle as shown at the right if a prop- erly grounded outlet is not available. A temporary adapter may be used to con- nect the power cord to a 2-pole receptacle as shown at the right if a prop- erly grounded outlet is not available. A temporary adapter may be used to con- nect the power cord to a 2-pole receptacle as shown at the right if a prop- erly grounded outlet is not available. A temporary adapter may be used to con- nect the power cord to a 2-pole receptacle as shown at the right if a prop- erly grounded outlet is not available. The lug or wire extending from the adapter must be connected with a metal screw to a permanent ground such as a properly grounded outlet box cover. Some 2-pole receptacle outlet box covers are not grounded. Before using an adapter, contact a quali- fied electrician to determine whether the outlet box cover is grounded before using an adapter. The temporary adapter should be used only until a properly grounded outlet can be installed by a qualified electrician. Plug the power cord into an appropriate Grounded Outlet outlet that is properly installed and grounded in accordance with all local codes and ordinances. The outlet must be on a nominal 120-volt circuit. Grounding Pin 14 The lug or wire extending from the adapter must be connected with a metal screw to a permanent ground such as a properly grounded outlet box cover. Some 2-pole receptacle outlet box covers are not grounded. Before using an adapter, contact a quali- fied electrician to determine whether the outlet box cover is grounded before using an adapter. The temporary adapter should be used only until a properly grounded outlet can be installed by a qualified electrician. The lug or wire extending from the adapter must be connected with a metal screw to a permanent ground such as a properly grounded outlet box cover. Some 2-pole receptacle outlet box covers are not grounded. Before using an adapter, contact a quali- fied electrician to determine whether the outlet box cover is grounded before using an adapter. The temporary adapter should be used only until a properly grounded outlet can be installed by a qualified electrician.

HOW TO MOVE THE ELLIPTICAL Due to the size and weight of the elliptical, moving it requires two persons. Stand in front of the elliptical, hold the upright (A), and place one foot against one of the wheels (B). Have a second person lift the handle (C) on the rear of the frame until the elliptical will roll on the wheels. Carefully move the elliptical to the desired location, and then lower it to the floor. A C B 15 HOW TO ADJUST THE POSITIONS OF THE PEDALS Each pedal can be adjusted to several positions. To adjust each pedal, simply pull the pedal handle (D) outward, move the pedal to the desired position, and then release the pedal handle into an adjustment hole beneath the pedal. Make sure to adjust both pedals to the same position. D HOW TO USE THE TABLET HOLDER IMPORTANT: The tablet holder (E) is designed for use with most full-size tablets. Do not place any other electronic device or object in the tablet holder. To insert a tablet into the tablet holder (E), E set the bottom edge of the tablet in the tray. Then, pull the clip over the top edge of the tablet. Make sure that the tablet is firmly secured in the tablet holder. Rotate the tab- let holder to the desired angle. Reverse these actions to remove the tablet from the tablet holder. HOW TO LEVEL THE ELLIPTICAL If the elliptical rocks slightly on your floor during use, turn one or both of the leveling feet (F) beneath the rear stabilizer or the leveling foot (G) beneath the frame until the rocking motion is eliminated. F G J 16 HOW TO EXERCISE ON THE ELLIPTICAL To mount the elliptical, hold the upper body arms (H) or the handlebars (I) and step onto the pedal (J) that is in the lower position. Then, step onto the other pedal. Push the pedals until they begin to move with a continuous motion. Note: The crank arms (K) can turn in either direction. It is recommended that you turn the crank arms in the direction shown by the arrow; however, for variety, you can turn the crank arms in the opposite direction.

To dismount the elliptical, wait until the pedals (J) come to a complete stop. Note: The elliptical does not have a free wheel; the pedals will continue to move until the flywheel stops. When the pedals are station- ary, step off the higher pedal first. Then, step off the lower pedal. H

I K CONSOLE DIAGRAM FEATURES OF THE CONSOLE The advanced console offers an array of features designed to make your workouts more effective and enjoyable. The console features wireless technology that enables the console to connect to iFit. With iFit, you can access a large and varied workout library, create your own workouts, track your workout results, and access many other features. In addition, the console features a selection of onboard workouts. Each workout automatically controls the resistance of the pedals and the incline of the ramp as it guides you through an effective exercise session. 17 When you use the manual mode of the console, you can change the resistance of the pedals and the incline of the ramp with the touch of a button. While you exercise, the console will display continu- ous exercise feedback. You can even measure your heart rate using the handgrip heart rate monitor or the included chest heart rate monitor. You can also listen to your favorite workout music or audio books with the console sound system while you exercise. To turn on the power, see page 18. To learn how to use the touch screen, see page 18. To set up the console, see page 19.

HOW TO TURN ON THE POWER IMPORTANT: If the elliptical has been exposed to cold temperatures, allow it to warm to room tem- perature before you turn on the power. If you do not do this, you may damage the console or other electrical components. Plug in the power cord (see HOW TO PLUG IN THE POWER CORD on page 14). Next, A locate the power switch on the frame near the power cord. Press the power switch to the reset position (A). The console will then turn on and be ready for use. Note: When you turn on the power for the first time, the incline system may calibrate automatically. The ramp will move upward and downward as it calibrates. When the ramp stops moving, the incline system is calibrated. IMPORTANT: If the incline system does not calibrate automatically, see step 6 on page 19 and manually calibrate the incline system. 18 HOW TO USE THE TOUCH SCREEN The console features a tablet with a full-color touch screen. The following information will help you use the touch screen: • The console functions similarly to other tablets. You can slide or flick your finger against the screen to move certain images on the screen, such as the displays in a workout. • To type information into a text box, first touch the text box to view the keyboard. To use numbers or other characters on the keyboard, touch ?123. To view more characters, touch Alt. Touch Alt again to return to the number keyboard. To return to the letter keyboard, touch ABC. To use a capital character, touch the shift button (upward-facing arrow symbol). To use multiple capital characters, touch the shift button again. To return to the lowercase keyboard, touch the shift button a third time. To clear the last character, touch the clear button (backward-facing arrow with an X symbol). HOW TO SET UP THE CONSOLE Before you use the elliptical for the first time, set up the console. 1. Connect to your wireless network. To use iFit workouts and to use several other features of the console, the console must be con- nected to a wireless network. Follow the prompts on the screen to connect the console to your wire- less network. 2. Customize settings. Follow the prompts on the screen to set the desired unit of measurement and your time zone. Note: To change these settings later, see HOW TO CHANGE CONSOLE SETTINGS on page 25. 3. Log into or create an iFit account. Follow the prompts on the screen to log into your iFit account or to create an iFit account. 4. Tour the console. The first time you use the console, a tour presen- tation will guide you through the features of the console. Note: To view the tour presentation again at any time, touch the profile button (person sym- bol) at the bottom of the screen, touch Settings, and then touch How It Works. 19 5. Check for firmware updates. First, touch the profile button, touch Settings, touch Maintenance, and then touch Update. The console will check for firmware updates. For more information, see HOW TO CHANGE CONSOLE SETTINGS on page 25. 6. Calibrate the incline system. First, touch the profile button, touch Settings, touch Maintenance, and then touch Calibrate Incline. The ramp will rise and lower as it calibrates. For more information, see HOW TO CHANGE CONSOLE SETTINGS on page 25. The console is now ready for you to begin working out. The following pages explain the workouts and other features that the console offers. To use the manual mode, see page 20. To use a map workout or an onboard workout, see page 21. To create a draw-your-own-map workout, see page 23. To use an iFit workout, see page 24. To change console settings, see page 25. To connect to a wireless network, see page 26. To use the sound system, see page 27. To connect an HDMI cable, see page 27. Note: If there is a sheet of plastic on the screen, remove the plastic.

HOW TO USE THE MANUAL MODE 1. Touch the screen or press any button on the console to turn on the console. See HOW TO TURN ON THE POWER on page 18. Note: It may take a few moments for the console to be ready for use. 2. Select the main menu. When you turn on the console, the main menu will appear on the screen after the console boots up. If you are in a workout, touch the screen, touch Pause, touch End, and then touch Finish to return to the main menu. If you are in the settings menus, touch the back button (arrow symbol) and then touch the close button (x symbol) to return to the main menu. 3. Change the resistance of the pedals and the incline of the ramp as desired. Touch Manual Start and begin pedaling. You can change the resistance of the pedals by pressing one of the numbered Quick Resistance buttons or by pressing the Resistance increase and decrease buttons. To vary the motion of the pedals, you can change the incline of the ramp by pressing one of the numbered Quick Ramp buttons or by pressing the Ramp increase and decrease buttons. Note: After you press a button, it will take a moment for the pedals to reach the selected resistance level or for the ramp to reach the selected incline level. 4. Follow your progress. The console offers several display modes. The display mode that you select will determine which workout information is shown. 20 To select the desired display mode or to view statistics and charts, drag downward on the screen. You can also touch the more button (+ symbol) to view statistics or charts. If desired, adjust the volume level by pressing the Vol increase and decrease buttons on the console. To pause the workout, simply touch the screen or stop pedaling. To continue the workout, simply resume pedaling. To end the workout session, first touch the screen to pause the workout. Next, touch End; a workout summary will appear on the screen. If desired, you can publish your results using one of the options on the screen. Then, touch Finish to return to the main menu. 5. Measure your heart rate if desired. You can measure your heart rate using either the handgrip heart rate monitor or the included chest heart rate monitor. Note: The console is compatible with all BLUETOOTH® Smart heart rate monitors. To use the chest heart rate monitor, see page 13. To use the handgrip heart rate monitor, follow the instructions below. Note: If you use both heart rate monitors at the same time, the chest heart rate monitor will have priority. If there are sheets of plastic on the metal con- tacts (B) on the handgrip heart rate monitor, remove the plas- tic. To measure your heart rate, hold the handgrip heart rate monitor with your palms resting against the contacts. Avoid moving your hands or gripping the contacts tightly. B When your pulse is detected, your heart rate will be shown. For the most accurate heart rate reading, hold the contacts for at least 15 seconds. If the display does not show your heart rate, make sure that your hands are positioned as described. Be careful not to move your hands excessively or to squeeze the contacts tightly. For optimal perfor- mance, clean the contacts using a soft cloth; never use alcohol, abrasives, or chemicals to clean the contacts. 6. Turn on the fan if desired. The fan has several speed settings, including an auto mode. While the auto mode is selected, the speed of the fan will automatically increase or decrease as your pedaling speed increases or decreases. Press the Fan increase and decrease buttons repeatedly to select a fan speed or to turn off the fan. Note: If the pedals are not moved for a while when the main menu is selected, the fan will turn off automatically. 7. When you are finished exercising, unplug the power cord. When you are finished exercising, press the power switch to the off position and unplug the power cord. IMPORTANT: If you do not do this, the electrical components of the elliptical may wear prematurely. 21 HOW TO USE A MAP WORKOUT OR AN ONBOARD WORKOUT 1. Touch the screen or press any button on the console to turn on the console. See HOW TO TURN ON THE POWER on page 18. Note: It may take a few moments for the console to be ready for use. 2. Select the main menu or the workout library. When you turn on the console, the main menu will appear on the screen after the console boots up. If you are in a workout, touch the screen, touch Pause, touch End, and then touch Finish to return to the main menu. If you are in the settings menus, touch the back button (arrow symbol) and then touch the close button (x symbol) to return to the main menu. Touch the buttons at the bottom of the screen to select either the main menu (C) or the workout library (D). To select a workout from the main menu or the workout library, simply touch the desired workout button on the screen. Slide or flick the screen to scroll upward or downward if necessary. Note: To use a map workout, the console must be connected to a wireless network (see HOW TO CONNECT TO A WIRELESS NETWORK on page 26). C D C D

3. Select a workout. The featured map workouts on your console will change periodically. To save one of the featured map workouts for future use, you can add it as a favorite by touching the favorites button (heart symbol). You must be logged into your iFit account to save a featured map workout (see step 3 on page 24).

To draw your own map for a workout, see HOW TO CREATE A DRAW-YOUR-OWN-MAP WORKOUT on page 23. When you select a workout, the screen will show an overview of the workout that includes details such as the duration and distance of the workout and the approximate number of calories you will burn during the workout. 4. Start the workout. Touch Start to start the workout. During some workouts, the screen will show a map of the route and a marker indicating your prog- ress. Touch the buttons on the screen to select the desired map options. The display modes will also show your progress. To select the desired display mode or to view statistics and charts, swipe downward on the screen. You can also touch the more button (+ symbol) to view statistics or charts. The workout will function in the same way as the manual mode (see page 20). During some workouts, the screen may show a target speed. As you exercise, keep your pedaling speed near the target speed shown on the screen. A message may appear prompting you to increase, decrease, or maintain your pedaling speed. IMPORTANT: The target speed is intended only to provide motivation. Your actual pedaling speed may be slower than the target speed. Make sure to pedal at a speed that is comfort- able for you. If the resistance level and/or incline level is too high or too low, you can manually override the setting by pressing the Resistance buttons or the Ramp buttons. If you press a Resistance button, you 22 can then manually control the resistance level (see step 3 on page 20). If you press a Ramp button, you can then manually control the incline level (see step 3 on page 20). To return to the programmed resistance and/or incline settings of the workout, touch Follow Workout. Note: The calorie goal shown in the workout description is an estimate of the number of calories that you will burn during the workout. The actual number of calories that you burn will depend on various factors, such as your weight. In addition, if you manually change the resistance level or incline level of the ramp during the workout, the number of calories you burn will be affected. To pause the workout, simply touch the screen or stop pedaling. To end the workout, touch End. To continue the workout, simply resume pedaling. When the workout comes to an end, a workout summary will appear on the screen. If desired, you can publish your results using one of the options on the screen. Then, touch Finish to return to the main menu. 5. Follow your progress. See step 4 on page 20. 6. Measure your heart rate if desired. 7. Turn on the fan if desired. See step 6 on page 21. power cord. See step 7 on page 21.

See step 5 on page 20. 8. When you are finished exercising, unplug the

HOW TO CREATE A DRAW-YOUR-OWN-MAP WORKOUT 1. Touch the screen or press any button on the console to turn on the console. See HOW TO TURN ON THE POWER on page 18. Note: It may take a few moments for the console to be ready for use. 2. Select a draw-your-own-map workout. When you turn on the console, the main menu will appear on the screen after the console boots up. If you are in a workout, touch the screen, touch Pause, touch End, and then touch Finish to return to the main menu. If you are in the settings menus, touch the back button (arrow symbol) and then touch the close button (x symbol) to return to the main menu. To select a draw-your-own-map workout, touch the draw-your-own-map button (map symbol) at the bottom of the screen. 3. Draw your map. Navigate to the area on the map where you want to draw your workout by sliding your fingers on the screen. Touch the screen to add the start point for your workout. Then, touch the screen to add the end point for your workout. If you want to start and end your workout at the same point, touch Loop or Out & Back on the left side of the screen. You can also select whether you want your workout to snap to the road. 23 If you make a mistake, touch Undo on the left side of the screen. The screen will display the elevation and distance statistics for your workout. 4. Save your workout. Touch Save New Workout to save your workout. If desired, enter a title and description for your work- out. Then, touch the continue button (> symbol). 5. Start the workout. Touch Start to start the workout. The workout will function in the same way as a map workout or an onboard workout (see page 21). 6. Follow your progress. See step 4 on page 20. 7. Measure your heart rate if desired. See step 5 on page 20. 8. Turn on the fan if desired. See step 6 on page 21. 9. When you are finished exercising, unplug the power cord. See step 7 on page 21. HOW TO USE AN IFIT WORKOUT To use an iFit workout, the console must be connected to a wireless network (see HOW TO CONNECT TO A WIRELESS NETWORK on page 26). An iFit account is also required. 1. Add workouts to your schedule on iFit.com. On your computer, smartphone, tablet, or other device, open an internet browser, go to iFit.com, and log in to your iFit account. Next, navigate to Menu > Library on the website. Browse the workout programs in the library and join the desired workouts. Then, navigate to Menu > Schedule to view your schedule. All of the workouts that you have joined will appear on your schedule; you can arrange or delete the workouts on your schedule as desired. Take time to explore the iFit.com website before you log out. 2. Select the main menu. When you turn on the console, the main menu will appear on the screen after the console boots up. If you are in a workout, touch the screen, touch Pause, touch End, and then touch Finish to return to the main menu. If you are in the settings menus, touch the back button (arrow symbol) and then touch the close button (x symbol) to return to the main menu. 3. Log in to your iFit account. If you have not already done so, touch the profile button (person symbol) at the bottom of the screen to log in to your iFit account. Follow the prompts on the screen to enter your username and password. To switch users within your iFit account, touch the profile button, and then touch Manage Accounts. If more than one user is associated with the account, a list of users will appear. Touch the name of the desired user. 24 4. Select an iFit workout that you have previously added to your schedule on iFit.com. IMPORTANT: Before iFit workouts will load, you must add them to your schedule on iFit.com (see step 1). To load an iFit workout from iFit.com to the console, touch the calendar button (calendar symbol) at the bottom of the screen. When you load a workout, the screen will show an overview of the workout that includes details such as the duration and distance of the workout and the approximate number of calories you will burn during the workout. 5. Start the workout. Touch Start to start the workout. The workout will function in the same way as a map workout or an onboard workout (see page 21). Note: During a distance or time workout, the screen will not show a map. 6. Follow your progress. See step 4 on page 20. See step 5 on page 20. 8. Turn on the fan if desired. See step 6 on page 21. 9. When you are finished exercising, unplug the See step 7 on page 21. For more information about iFit, go to iFit.com.

7. Measure your heart rate if desired. power cord.

HOW TO CHANGE CONSOLE SETTINGS IMPORTANT: Some of the settings and features described may not be enabled. Occasionally, a firmware update may cause your console to function slightly differently. 1. Select the settings main menu. First, turn on the power (see HOW TO TURN ON THE POWER on page 18). Note: It may take a few moments for the console to be ready for use. Next, select the main menu. When you turn on the console, the main menu will appear on the screen after the console boots up. If you are in a workout, touch the screen, touch Pause, touch End, and then touch Finish to return to the main menu. Next, touch the profile button (person symbol) at the bottom of the screen, and then touch Settings. The settings menu will appear on the screen. 2. Navigate the settings menus and change settings as desired. Slide or flick the screen to scroll upward or down- ward if necessary. To view a settings menu, simply touch the menu name. To exit a menu, touch the back button (arrow symbol). You may be able to view and change settings in the following settings menus: Account • My Profile • In Workout • Manage Accounts Equipment • Equipment Info • Equipment Settings • Maintenance • Wi-Fi About • How It Works • Feedback • Legal 25 3. View the console tour presentation. To view a tour presentation that will guide you through the features of the console, touch How It Works. 4. Customize the unit of measurement and other settings. To customize the unit of measurement, the time zone, or other settings, touch Equipment Settings, and then touch the desired settings. The console can display speed and distance in either standard or metric units of measurement. 5. View machine information. Touch Equipment Info, and then touch Machine Info to view information about your elliptical. 6. Update the console firmware. For the best results, regularly check for firmware updates. Touch Maintenance, and then touch Update to check for firmware updates using your wireless network. The update will begin automatically. IMPORTANT: To avoid damaging the elliptical, do not turn off the power while the firmware is being updated. The screen will show the progress of the update. When the update is complete, the elliptical will turn off and then turn back on. If it does not, press the power switch into the off position. Wait for several seconds, and then press the power switch into the reset position. Note: It may take a few minutes for the console to be ready for use. Note: Occasionally, a firmware update may cause the console to function slightly differently. These updates are always designed to improve your exercise experience. 7. Calibrate the incline system. To calibrate the incline system, touch Maintenance, touch Calibrate Incline, and then touch Begin. The ramp will automatically rise to the maximum incline level, lower to the minimum incline level, and then return to the starting position. This will calibrate the incline system. When the incline system is calibrated, touch Finish. IMPORTANT: Keep pets, feet, and other objects away from the elliptical while the incline system is calibrating. 8. Exit the settings main menu. If you are in a settings menu, touch the back button. Then, touch the close button (x symbol) to exit the settings main menu. HOW TO CONNECT TO A WIRELESS NETWORK To use iFit workouts and to use several other features of the console, the console must be connected to a wireless network. 1. Select the main menu. First, turn on the power (see HOW TO TURN ON THE POWER on page 18.) Note: It may take a few moments for the console to be ready for use. Next, select the main menu. When you turn on the console, the main menu will appear on the screen after the console boots up. If you are in a workout, touch the screen, touch Pause, touch End, and then touch Finish to return to the main menu. 2. Select the wireless network menu. Touch the Wi-Fi button (wireless symbol) at the bottom of the screen to select the wireless network menu. 26 3. Enable Wi-Fi. Make sure that Wi-Fi® is enabled. If it is not enabled, touch the Wi-Fi toggle to enable it. 4. Set up and manage a wireless network connection. When Wi-Fi is enabled, the screen will show a list of available networks. Note: It may take a few moments for the list of wireless networks to appear. Note: You must have your own wireless network and an 802.11b/g/n router with SSID broadcast enabled (hidden networks are not supported). When a list of networks appears, touch the desired network. Note: You will need to know your network name (SSID). If your network has a password, you will also need to know the password. Follow the prompts on the screen to enter your password and connect to the selected wireless network. (To use the keyboard, see HOW TO USE THE TOUCH SCREEN on page 18.) When the console is connected to your wireless network, a checkmark will appear next to the wireless network name. If you are having problems connecting to an encrypted network, make sure that your password is correct. Note: Passwords are case-sensitive. Note: The console supports unsecured and secured (WEP, WPATM, and WPA2TM) encryption. A broadband connection is recommended; perfor- mance depends on connection speed. Note: If you have questions after following these instructions, go to support.iFit.com for assistance. 5. Exit the wireless network menu. To exit the wireless network menu, touch the back button (arrow symbol). HOW TO USE THE SOUND SYSTEM To play music or audio books through the console sound system while you exercise, plug a 3.5 mm male to 3.5 mm male audio cable (not included) into the jack on the console and into a jack on your personal audio player; make sure that the audio cable is fully plugged in. Note: To purchase an audio cable, see your local electronics store. Next, press the play button on your personal audio player. Adjust the volume level using the volume increase and decrease buttons on the console or the volume control on your personal audio player. 27 HOW TO CONNECT AN HDMI CABLE To show your console screen on a TV or monitor, plug an HDMI cable (not included) into the port on the con- sole and into a port on your TV or monitor; make sure that the HDMI cable is fully plugged in. Note: To purchase an HDMI cable, see your local electronics store.

FCC INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and the receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. FCC CAUTION: To assure continued compliance, use only shielded interface cables when connecting to computer or peripheral devices. Changes or modifications not expressly approved by the party respon- sible for compliance could void the user’s authority to operate this equipment. IMPORTANT: To satisfy exposure compliance requirements, the antenna and transmitter in the console must be at least 8 in. (20 cm) from all persons and must not be near or connected to any other antenna or transmitter. Note: The console contains FCC ID: SMFOMC360526A. 28 MAINTENANCE Regular maintenance is important for optimal performance and to reduce wear. Inspect and properly tighten all parts each time the elliptical is used. Replace any worn parts immediately. To clean the elliptical, use a damp cloth and a small amount of mild soap. IMPORTANT: To avoid damage to the console, keep liquids away from the console and keep the console out of direct sunlight. CONSOLE TROUBLESHOOTING If the console does not turn on, make sure that the power cord is fully plugged in and that the power switch is in the reset position. If the console does not display your heart rate when you hold the handgrip heart rate monitor, or if the dis- played heart rate appears to be too high or too low, see step 5 on page 20. If the console does not display your heart rate when you use the chest heart rate monitor, see TROUBLESHOOTING on page 13. If you are having problems connecting the console to a wireless network or if you are having problems with your iFit account or iFit workouts, go to support.iFit.com. If the console does not boot up properly, or if the con- sole freezes and does not respond, reset the console to the factory default set- tings. IMPORTANT: Doing this will erase all custom settings you have made to the console. Resetting the console requires two MAINTENANCE AND TROUBLESHOOTING people. First, press the power switch and unplug the power cord. Next, locate the small reset opening (A) near the USB port on the console. Using a bent paper clip, press and hold the reset button inside the open- ing, and have a second person plug in the power cord and press the power switch. Continue holding the reset button until the console turns on. When the reset operation is complete, the console will turn off and then turn back on. If it does not, press the power switch off and then on again. Once the console turns on, check for firmware updates (see step 6 on page 25). Note: It may take a few minutes for the console to be ready for use. INCLINE SYSTEM TROUBLESHOOTING If the ramp does not move to the correct incline level, see HOW TO CHANGE CONSOLE SETTINGS on page 25 and calibrate the incline system. TABLET HOLDER TROUBLESHOOTING If the tablet holder does not stay in place, rotate the tablet holder backward and tighten the screw (B) until the tablet holder stays in place when it is rotated to the desired position. A B 29

HOW TO ADJUST THE REED SWITCH If the console does not display correct feedback, the reed switch should be adjusted. To adjust the reed switch, first unplug the power cord. HOW TO ADJUST THE DRIVE BELT If the pedals slip while you are pedaling, even while the resistance is adjusted to the highest level, the drive belt may need to be adjusted. To adjust the drive belt, first unplug the power cord. Next, use a standard screwdriver and carefully pry the left Disc Cover (55) off the left Disc (71). Next, turn the left Crank Arm (20) until one of the Magnets (43) on the Pulley (19) is aligned with the Reed Switch (38). Then, slightly loosen the two M4 x 16mm Screws (104), slide the Reed Switch (38) slightly closer to or away from the Magnet (43), and retighten the Screws. 71 55 Next, using a stan- dard screwdriver, pry off the Shield Cover (56) and slide it upward. Then, remove the four M4 x 16mm Screws (not shown) from the upper and lower ends of the Rear Shield (75), and remove the Rear Shield. Then, remove the four M4 x 16mm Screws (not shown) from the upper and lower ends of the Rear Shield (75), and remove the Rear Shield. Then, look between the Shields (73, 74) and locate the M8 Locknut (102). Tighten the Locknut until the Drive Belt (113) is tight. 56 56 75 75 Then, plug in the power cord and turn the left crank arm for a moment. Repeat the procedure above, if necessary, until the console displays correct feedback. Then, reattach the left disc. 38 When you have properly adjusted the drive belt, reat- tach the rear shield and press the shield cover onto the rear shield. 4319 104 20 30 73 113 102 74 EXERCISE GUIDELINES WARNING: Before beginning this or any exercise program, consult your physi- cian. This is especially important for persons over age 35 or persons with pre-existing health problems. The heart rate monitor is not a medical device. Various factors may affect the accuracy of heart rate readings. The heart rate monitor is intended only as an exercise aid in determin- ing heart rate trends in general. These guidelines will help you to plan your exercise program. For detailed exercise information, obtain a reputable book or consult your physician. Remember, proper nutrition and adequate rest are essential for successful results. EXERCISE INTENSITY Whether your goal is to burn fat or to strengthen your cardiovascular system, exercising at the proper inten- sity is the key to achieving results. You can use your heart rate as a guide to find the proper intensity level. The chart below shows recommended heart rates for fat burning and aerobic exercise. To find the proper intensity level, find your age at the bottom of the chart (ages are rounded off to the near- est ten years). The three numbers listed above your age define your “training zone.” The lowest number is the heart rate for fat burning, the middle number is the heart rate for maximum fat burning, and the highest number is the heart rate for aerobic exercise. 31 Burning Fat—To burn fat effectively, you must exer- cise at a low intensity level for a sustained period of time. During the first few minutes of exercise, your body uses carbohydrate calories for energy. Only after the first few minutes of exercise does your body begin to use stored fat calories for energy. If your goal is to burn fat, adjust the intensity of your exercise until your heart rate is near the lowest number in your training zone. For maximum fat burning, exercise with your heart rate near the middle number in your training zone. Aerobic Exercise—If your goal is to strengthen your cardiovascular system, you must perform aerobic exercise, which is activity that requires large amounts of oxygen for prolonged periods of time. For aerobic exercise, adjust the intensity of your exercise until your heart rate is near the highest number in your training zone. WORKOUT GUIDELINES Warming Up—Start with 5 to 10 minutes of stretch- ing and light exercise. A warm-up increases your body temperature, heart rate, and circulation in preparation for exercise. Training Zone Exercise—Exercise for 20 to 30 min- utes with your heart rate in your training zone. (During the first few weeks of your exercise program, do not keep your heart rate in your training zone for longer than 20 minutes.) Breathe regularly and deeply as you exercise ; never hold your breath. Cooling Down—Finish with 5 to 10 minutes of stretch- ing. Stretching increases the flexibility of your muscles and helps to prevent post-exercise problems. EXERCISE FREQUENCY To maintain or improve your condition, complete three workouts each week, with at least one day of rest between workouts. After a few months of regular exer- cise, you may complete up to five workouts each week, if desired. Remember, the key to success is to make exercise a regular and enjoyable part of your everyday life.

PART LIST Model No. PFEL51517.1 R0518A Key No. Qty. Description Key No. Qty. Description

1 1 Frame 2 1 Rear Stabilizer Cover 3 1 Ramp 4 1 Upright 5 2 Rear Stabilizer 6 1 Right Front Stabilizer 7 1 Console 8 1 Front Stabilizer Cover 9 1 Left Front Stabilizer 10 1 Ramp Cover 11 4 Track 12 1 Left Roller Arm 13 1 Lift Motor 14 1 Left Pedal 15 1 Control Board 16 1 Power Switch 17 1 Power Cord Grommet 18 1 Crank 19 1 Pulley 20 2 Crank Arm 21 4 Pedal Arm Cap 22 1 Idler 23 1 M17 Washer 24 2 Pulse Sensor Cover 25 1 Resistance Motor 26 2 Lower Saddle Bracket 27 2 Lift Frame Bushing 28 1 Eddy Mechanism 29 1 Left Pedal Handle 30 8 Medium Bushing 31 1 Lift Frame Axle 32 2 Pulse Sensor Cap 33 2 Small Snap Ring 34 2 Wheel 35 2 Bolt Set 36 1 Right Upper Body Leg 37 1 Accessory Tray 38 1 Reed Switch/Wire 39 1 Clamp 40 2 Bearing 41 1 Right Upper Grip 42 1 Medium Crank Spacer 43 2 Magnet 44 1 Left Pedal Arm 45 1 Right Roller Arm 46 1 Left Upper Body Leg 47 1 Left Upper Body Arm 48 1 Left Upper Grip 49 1 Right Pedal 50 1 Right Lower Grip 32 51 4 Large Roller 52 1 Left Lower Grip 53 2 Axle Cover 54 1 Left Saddle Bracket Cover 55 2 Disc Cover 56 1 Shield Cover 57 4 Small Bushing 58 1 Right Pedal Arm 59 1 Left Upper Saddle Bracket 60 1 Right Saddle Bracket Cover 61 1 Right Upper Body Arm 62 2 Foot 63 2 Pulse Sensor 64 4 M4 x 19mm Screw 65 1 Ramp Axle 66 1 Left Outer Leg Cover 67 1 Left Inner Leg Cover 68 1 Upper Upright Cover 69 1 Lower Upright Cover 70 4 Upper Body Leg Bushing 71 2 Disc 72 4 Large Bushing 73 1 Left Shield 74 1 Right Shield 75 1 Rear Shield 76 1 Frame Cover 77 2 Upper Body Arm Cover 78 2 Key 79 2 M6 Acorn Nut 80 1 Accessory Tray Base 81 1 J-bolt 82 2 Pedal Spacer 83 1 Small Crank Spacer 84 1 Right Pedal Insert 85 1 Left Pedal Insert 86 2 Medium Roller 87 1 Right Pedal Plate 88 1 Left Pedal Plate 89 1 Upright Pivot Screw 90 2 Frame Cap 91 2 Ramp Cap 92 4 Leveling Foot 93 1 Large Snap Ring 94 2 Pedal Spring 95 11 Post Fastener w/Screw 96 4 Medium Snap Ring 97 1 Roller Axle 98 4 Clip Nut 99 14 M10 Locknut 100 1 Large Crank Spacer

Key No. Qty. Description Key No. Qty. Description

101 1 Idler Screw 102 7 M8 Locknut 103 2 Pedal Pin 104 80 M4 x 16mm Screw 105 1 Lift Frame 106 1 Small Roller 107 4 Standoff 108 1 Pulse Wire 109 1 Chest Heart Rate Monitor 110 1 Main Wire Harness 111 1 Right Pedal Handle 112 1 Power Cord 113 1 Drive Belt 114 4 Nylon Bushing 115 8 M4 x 10mm Self-tapping Screw 116 2 Rod End Bearing 117 4 M10 x 54mm Bolt 118 2 M10 Nut 119 2 M8 Washer 120 2 M8 Shoulder Screw 121 1 Right Upper Saddle Bracket 122 1 Stop Plate 123 1 Control Board Bracket 124 4 M4 x 25mm Screw 125 1 Right Inner Leg Cover 126 1 Right Outer Leg Cover 127 1 Bumper 128 2 M8 Flat Washer 129 4 M10 Large Washer 130 4 M8 x 18mm Bolt 131 2 M8 Flat Head Screw 132 8 M10 x 20mm Screw 133 4 M6 Washer 134 1 M10 x 48mm Bolt 135 1 M10 x 36mm Bolt 136 4 M10 Washer 137 10 M6 x 12mm Screw 138 16 M4 x 10mm Screw 139 4 M10 x 70mm Screw 140 2 M10 x 60mm Screw 141 4 M4 Washer 142 2 M10 x 75mm Screw 143 4 M10 x 45mm Bolt 144 12 M10 x 20mm Screw 145 1 Eddy Mechanism Snap Ring 146 4 M4 x 12mm Flat Head Screw 147 1 M8 Small Washer 148 4 M2.6 x 33mm Screw 149 6 M4 x 22mm Screw 150 2 M12 Nut 151 1 Tablet Holder 152 4 Tablet Holder Screw 153 2 Center Ramp Cover * – User’s Manual * – Assembly Tool * – Grease Packet

Note: Specifications are subject to change without notice. For information about ordering replacement parts, see the back cover of this manual. *These parts are not illustrated. 33 EXPLODED DRAWING A Model No. PFEL51517.1 R0518A 47 51 77 104 75 104 80 85 88 89 90 92 12 29 153 91 153 95 5 144 104 104 132 122 135 2 132 129 99 140 97 105 31 99104144 92 144 104 104 106 48 52 44 151 63 3224 152 152 148 7 37 104 46 11 11 4 69 9 14 1613 72 76 104 146 104 138 138 66 54 56 10 59 104115 104 25 73 115 123 27 8 95 15104 17 3 134 104 127 27 65 129104 132 34 136 132 67 68 104 142 104 38 39 104 107 33 33 136 62 34 6 1 EXPLODED DRAWING B Model No. PFEL51517.1 R0518A 130 42 40 18 43 19 108 112 10943 20 104 149 10445 49 21 110 111 28 93 86 83 23 86 102 102 145 141 30 30 132 136 82 74 78 79 102 102 117 147 22 101 139 100 81 117121 118 149 104 104 14936 55 132 103 138 137 138 128 113 60 131 149 30 30 133 133 99 99 98 57 41 26 95 104 98 129 57 50 104 104 64 95 124 53 71 51 61 104 70 95 14351 77 96 70 84 99 125 150 104 114 116 114 126 58 35 21 87 119 120 94 35 35 ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to provide the following information when contacting us: • the model number and serial number of the product (see the front cover of this manual) • the name of the product (see the front cover of this manual) • the key number and description of the replacement part(s) (see the PART LIST and the EXPLODED DRAWING near the end of this manual) LIMITED WARRANTY IMPORTANT: To protect your fitness equipment with an extended service plan, see page 5. ICON Health & Fitness, Inc. (ICON) warrants this product to be free from defects in workmanship and material, under normal use and service conditions. The frame is warranted for the lifetime of the original purchaser (customer). Parts are warranted for six (6) years from the date of purchase. Labor is warranted for three (3) years from the date of purchase. This warranty extends only to the original purchaser (customer) and is not transferrable. ICON’s obliga- tion under this warranty is limited to repairing or replacing, at ICON’s option, the product through one of its authorized service providers. All repairs for which warranty claims are made must be preauthorized by ICON. If replacement parts are shipped while the product is under warranty, the customer will be respon- sible for a minimal handling charge. For in-home service, the customer may be responsible for a minimal trip charge. This warranty does not extend to freight damage to the product. This warranty will automati- cally be voided by the following conditions: (1) if the product is used as a store display model, (2) if the product is purchased or transported outside the USA, (3) if all instructions and warnings in this manual are not followed, (4) if the product is abused or improperly or abnormally used, or (5) if the product is used for commercial or rental purposes. No other warranty beyond that specifically set forth above is authorized by ICON. ICON is not responsible or liable for the following damages: (1) indirect, special, or consequential dam- ages arising out of or in connection with the use or performance of the product; (2) damages with respect to any economic loss, loss of property, loss of revenues or profits, loss of enjoyment or use, or costs of removal or installation; or (3) other consequential damages of any kind. Some states do not allow the exclusion or limitation of incidental or consequential damages. Accordingly, the above limitation may not apply to the customer. The warranty extended hereunder is in lieu of any and all other warranties, and any implied warranties of merchantability or fitness for a particular purpose are limited in their scope and duration to the terms set forth herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above limitation may not apply to the customer. This warranty provides specific legal rights; the customer may have other rights that vary from state to state. For warranty service, please call the telephone number on the front cover of this manual. Please be pre- pared to provide the model number and serial number of the product (see the front cover of this manual). ICON Health & Fitness, Inc., 1500 S. 1000 W., Logan, UT 84321-9813 Part No. 401471 R0518A Printed in China © 2018 ICON Health & Fitness, Inc.


FREE ENGLISH PDF

OPERATING INSTRUCTIONS

USER GUIDE - USER MANUAL

OWNER GUIDE - OWNER MANUAL

REFERENCE GUIDE - REFERENCE MANUAL

INSTRUCTION GUIDE - INSTRUCTION MANUAL

Leave a Reply