Free English PHILIPS TAK4200 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD PHILIPS TAK4200 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
How do I charge the PHILIPS TAK4200 battery?
Plug one end of the USB-C cable into the PHILIPS TAK4200 and the other end into a power source. The LED indicator turns white during charging and turns off when the headphones are fully charged. A full charge typically takes 2 hours.
How do I pair the PHILIPS TAK4200 with my Bluetooth device for the first time?
Ensure the PHILIPS TAK4200 is fully charged and powered off. Press and hold the power button for 2 seconds to enter pairing mode, indicated by the LED flashing white and blue alternately. Turn on the Bluetooth function of your Bluetooth device, select PHILIPS TAK4200 from the list. If prompted, enter the password 0000. For devices featuring Bluetooth 3.0 or higher, no password is required.
How do I pair the PHILIPS TAK4200 with another Bluetooth device?
Turn on the PHILIPS TAK4200, then press the MFB button for 5 seconds to enter pairing mode. You can then discover the device using the second Bluetooth device following normal pairing procedures.
How do I connect the PHILIPS TAK4200 to my Bluetooth device after initial setup?
Turn on your Bluetooth device, then press and hold the power button on the PHILIPS TAK4200 to turn it on. The blue LED will light for 1 second as the headphones automatically reconnect to the last connected device.
What are the music control operations for the PHILIPS TAK4200?
Play or pause music: Press the play/pause button once.
Adjust volume up: Press the plus button once.
Adjust volume down: Press the minus button once.
Next track: Long press the minus button.
Previous track: Long press the plus button.
What are the call control operations for the PHILIPS TAK4200?
Answer/hang up a call: Press the play/pause button once.
Reject a call: Long press the play/pause button.
Switch caller during a call: Press the play/pause button once.
How do I trigger or stop the voice assistant on the PHILIPS TAK4200?
To trigger the voice assistant (Siri/Google), press the MFB button twice. To stop the voice assistant, press the MFB button once.
How do I manage the light effects on the PHILIPS TAK4200?
Trigger light effect: Long press the play/pause button.
Switch light effect: Long press the play/pause button again within 5 seconds after triggering.
Stop light effect: Long press the play/pause button again after 5 seconds have passed since triggering.
How do I enable or disable audio share on the PHILIPS TAK4200?
To enable audio share, press the MFB button 4 times within 1 second. To disable audio share, press the MFB button 4 times within 1 second.
How can I reset the PHILIPS TAK4200 to factory default settings?
1. On your Bluetooth device, remove the PHILIPS TAK4200 from the Bluetooth device list.
2. Turn off the Bluetooth function on your device.
3. Turn on the PHILIPS TAK4200.
4. Press and hold the volume minus and volume plus buttons for 4 seconds at the same time.
5. Follow the standard connection steps to re-pair.
What do the LED indicator signals on the PHILIPS TAK4200 mean?
The headphones are connected to a Bluetooth device: Blue LED flashes every 5 seconds.
The headphones are ready for pairing: The LED flashes blue and white alternately.
The headphones are on but not connected to a Bluetooth device: White LED flashes every 7 seconds.
Low battery level: White LED flashes every 5 seconds.
What should I do if my PHILIPS TAK4200 will not turn on?
The battery level is low. Charge the PHILIPS TAK4200.
What should I do if I cannot pair my PHILIPS TAK4200 with my Bluetooth device?
Bluetooth may be disabled. Enable the Bluetooth feature on your Bluetooth device and turn on the device before powering on the PHILIPS TAK4200.
What should I do if I hear music but cannot control it from the PHILIPS TAK4200?
Make sure the Bluetooth audio source supports AVRCP.
Why is the volume level on my PHILIPS TAK4200 too low?
Some Bluetooth devices cannot link the volume level with the PHILIPS TAK4200 through volume sync. In this case, adjust the volume on your Bluetooth device independently. If using the headphones in kids mode, the volume may be limited to 75dB. Check the volume limit settings in the application to adjust this.
Why cannot my Bluetooth device find the PHILIPS TAK4200?
The PHILIPS TAK4200 may be connected to a previously paired device. Turn off the connected device or move it out of range. Alternatively, pairing may have been reset. Pair the PHILIPS TAK4200 with the Bluetooth device again.
Why does the music play on my phone speaker instead of the PHILIPS TAK4200?
Ensure you have selected to listen to music through the PHILIPS TAK4200 in the settings of your mobile phone.
Why is the audio quality poor and why is there crackling noise on the PHILIPS TAK4200?
The Bluetooth device may be out of range. Reduce the distance between the PHILIPS TAK4200 and the device, or remove obstacles between them. Also, ensure the PHILIPS TAK4200 is charged.
CLICK HERE TO DOWNLOAD PHILIPS TAK4200 (01) PDF DOCUMENT