PANASONIC TX-P65VT65B (02) PDF MANUAL

PANASONIC TX-P65VT65B (02) PDF SUMMARY:

How do I prevent image retention or “burn-in” on my plasma screen?

Do not display any still part of the image for a long period. This includes channel numbers, logos, still images in 4:3 or 14:9 aspect ratio, and video games. To avoid image retention, the screen saver or on-screen messages may activate if no signals are sent or operations are performed.

---

What should I do if I detect anything unusual with the TV?

Immediately switch off the mains supply switch and remove the mains plug.

---

What are some important safety precautions regarding the mains plug and lead?

Ensure the mains plug is fully inserted into the socket outlet and is easily accessible. Disconnect the mains plug when cleaning the TV. Do not touch the mains plug with wet hands, damage the mains lead, place heavy objects on the lead, place the lead near a high-temperature object, pull on the lead when disconnecting, or move the TV with the lead plugged in. Also, avoid twisting, bending, or stretching the lead. Do not use a damaged mains plug or socket outlet. Do not use a lead other than the provided.

---

How do i replace the fuse?

Pull out the fuse cover with a screwdriver and replace the fuse.

---

What precautions should I take regarding covers, ventilation, and moving the TV?

Do not remove covers or modify the TV yourself, as live parts are accessible. Ensure proper ventilation around the TV, with minimum distances of 10 cm on the sides and top, and 7 cm at the back. Do not block ventilation openings. Before moving the TV, disconnect all cables.

---

What warnings are associated with small objects, the pedestal, and radio waves?

Keep small, dangerous parts such as plastic bags, SD Cards and batteries out of reach of children. Do not disassemble or modify the pedestal, and use only the provided pedestal. Also, be mindful of radio wave interference with medical equipment, automatic control equipment, and cardiac pacemakers.

---

How do I handle batteries for the remote control and other accessories?

Install batteries correctly, observing polarity. Do not mix old and new batteries, different battery types, or use rechargeable batteries unless specified. Do not burn, break up, or expose batteries to excessive heat. Remove batteries when not using the device for a long time.

---

Are there any specific precautions for using the Electronic Touch Pen?

Avoid hitting or picking the TV screen with the pen. Only touch the screen with the tip, do not press to hard and do not move the pen fast to prevent scratches. Stop using if you experience redness, pain, or skin irritation. Use it for 1 hour at a time, to reduce eyestrain and take breaks. Do not use the pen at hight temperatures.

---

What care should be taken regarding the 3D Eyewear?

Use 3D Eyewear only for viewing 3D content. Do not move around, drop, bend, or exert pressure on the Eyewear. Be careful of the frame tips. Do not use damaged Eyewear. If you have vision problems, correct your vision before using. Stop using if you experience skin irritation.

---

Are there guidelines for children viewing 3D images?

Children under six should generally not view 3D images. Closely supervise any child viewing 3D content, ensuring their safety and health. Stop viewing immediately if any discomfort arises.

---

When should I not view 3D images?

Do not view 3D images if you have a history of light sensitivity, heart problems, or other medical conditions. Also, view from a recommended distance, at least three times the image height.

---

How do I assemble the pedestal (50-inch model)?

1. Insert the bracket © into the base (D).
2. Secure with assembly screws (A) x 4.
3. Attach the cover (E) to the bracket.

---

How do I remove the pedestal from the TV?

1. Remove the assembly screws (B) from the TV.
2. Pull out the pedestal from the TV.
3. Remove the assemply screw (A) from the cover.
4. Pull out the cover.
5. Remove the assembly screws (A) from the bracket.

---

What types of connections are available on the TV?

The TV features various terminals, including CI slot, SD Card slot, Headphone jack, USB 1-3 ports, HDMI1-3, DIGITAL AUDIO, AV2 (COMPONENT / VIDEO), AV1 (SCART), SERVICE PORT, Terrestrial terminal, Satellite terminal, and ETHERNET.

---

How do I connect a DVD Recorder/VCR using the basic connection method?

Connect the Terrestrial aerial to the DVD Recorder/VCR using an RF cable. Then connect the DVD Recorder/VCR to the TV using a SCART cable and the AV1 (SCART) adapter. Finally, connect the aerial to the TV.

---

How do I make a wired network connection?

Use an Unshielded Twist Pair (UTP) LAN cable to connect the TV’s ETHERNET port to the internet environment. Ensure the cable is less than 10 cm from the port. Attach supplied Ferrite core. Install the Ferrite Core.

1. Pull back the tabs (in two places).
2. Wind the cable twice.
3. Close

---

How do I connect headphones to the TV?

Plug the headphones (M3 stereo mini plug) into the headphone jack. Adjust the volume using [Headphone Volume] in the Sound Menu. Install the Ferrite Core:

1. Pull back the tabs (in two places)
2. Wind the cable twice
3. Close

---

How to use the Common Interface?

If a view card and a card reader come as a set, first insert the card reader, then insert the view card into the card reader. Insert the module in the correct direction.

---

What is the table for Types of connectable equipment to each terminal?

Features	AV1	AV2 COMPONENT	AV2 VIDEO	DIGITAL AUDIO	ETHERNET	HDMI 1-3	USB 1-3
To record / play back videocassettes / DVDs	●
To watch 3D contents						●
To watch cable broadcasts	●	●	●			●
To watch DVDs	●	●	●			●
To watch camcorder images	●		●			●
To play games	●		●			●
To use amplifier with speaker system				●		●*2
To use network services					●
USB HDD Recording							●*3
VIERA Link						●

*1: Terminal adaptor (supplied) is neccesary *2: Use HDMI2 *3: Use USB 3 port

---

How to Use the cable tie and cable clamp?

Attach the Cable Tie: Insert the cable tie into a hole.

Bundle the cables:

1. Set the tip in the hooks.

To remove from TV:

1. keep pushing both side snaps.

To loosen:

1. Keep pushing the knob

Attach the cable clamp. Insert the cable clamp in a hole.

Bundle the cables. Set To release:

1. Keep pushing the tab. To remove from TV:
2. keep pushing both side snaps

---

How do I use the remote control?

The remote control has various buttons, including Standby On/Off, 3D, Main Menu, Information, APPS, OK, Option Menu, Coloured buttons, Sound Mute, Text service button, Volume Up/Down, Numeric buttons, eHELP, Light, Input mode selection, Exit, HOME, TV Guide, Cursor buttons, Return, Aspect, Subtitles, Channel Up/Down, Last view, and operation buttons for content and connected equipment.

---

How do I install or remove batteries from the remote control?

Pull open the cover, insert the batteries (R6) observing the correct polarity (+ or -), and close the cover.

---

What are the main functions of the VIERA Touch Pad Controller?

The Touch Pad Controller offers features like Standby On/Off, Microphone, Touch pad, Option Menu, HOME, Volume Up/Down, APPS, On-screen remote control, Return, Channel Up/Down, and OK.

---

How do I use the touch pad on the VIERA Touch Pad Controller?

Tap the center of the pad for “OK”. Slide your finger to move the cursor. Trace the fringe to scroll.

---

How do I install/remove batteries in the VIERA Touch Pad Controller?

Slide open the cover, insert batteries noting the correct polarity (+ or -), and close the cover.

---

How to turn on and off the Electronic Touch Pen?

To turn on: Press once To turn off: Press and hold 2 seconds or longer. Automatically turned off if unused for 5 minutes.

---

What is the indicator lamp for the Electronic Touch Pen for?

Lights for approx. 2 seconds when turned on, and then blinks at approx. 2-second intervals. Up to 2 pieces of the Electronic Touch Pen (Pen1 / Pen2) can be used simultaneously. Indicator blinks: Pen1: Red Pen2: Green Also lights or blinks when pairing the Electronic Touch Pen to the TV. Blinks 5 times consecutively at power-on when the battery level is low.

---

How do I insert the Battery into the Electronic Touch Pen?

1. Turn and slide the unit cover until the entire shape of the battery is visible.
2. Insert the R03 battery, and then slide and turn the unit cover to close until it clicks.

---

How to hold the Electronic Touch Pen?

Touch the tip of the Electronic Touch Pen vertically onto the TV screen and press it lightly.

---

How do I access the main menu using the buttons on the TV itself?

Press and hold the Input mode selection button for about 3 seconds.

---

How do I use the On Screen Displays operation guide?

The operation guide helps with on-screen operations. The remote control can open the main menu, move the cursor, select options, adjust levels, access menus, store settings, return to previous menus, and exit menus.

---

What is the process for the First Time Auto Setup?

1. Plug the TV into the mains socket and turn it on.
2. Select [Home] as the viewing environment.
3. Set up the network connection.
4. Select your country and region.
5. [Satellite Antenna Setup].
6. Register VIERA Touch Pad Controller and/or the Electronic Touch Pen.
7. Select the type of [Home Screen].

---

How do I watch TV after setup?

1. Select the TV viewer from the [Home Screen].
2. Select the mode (freesat, DVB, Analogue, Other Sat., Satellite).
3. Select a channel using the up/down buttons or numeric buttons.

---

How to use eHelp?

Display [HELP] Press the help (?) button on the remote or press Menu and select Help.

Select the category and item: Use the arrow keys to select from the: Category field, Item field, sub item field, Description.

---

How do I view 3D images?

1. Turn on the 3D Eyewear and put it on.
2. View 3D images. Safety precautions might be displayed initially, select [Yes] or [No] to view.

---

What should I do if the remote control doesn’t work or is intermittent?

Check if the batteries are installed correctly, if the TV is switched on, or if the batteries are low. Ensure the remote is pointed directly at the TV’s signal receiver, and there are no bright light sources interfering.

---

What should I do if the Electronic Touch Pen doesn’t work?

Make sure the battery is installed correctly and has power. Make sure the pen is within 50 cm for pairing and is paired.

---

What if no image is displayed?

Make sure the mains is plugged in and the TV is on. Check the correct input is selected.

---

How do I clean the display panel, cabinet, and pedestal?

For regular care, gently wipe the surfaces with a soft cloth. For stubborn dirt, dampen a soft cloth with clean water or diluted neutral detergent (1 part detergent to 100 parts water), wring, wipe, and then dry.

---

How do I clean the mains plug?

Wipe the mains plug with a dry cloth at regular intervals.

---

What are the specifications for the HDMI 1/2/3 input?

TYPE A Connectors HDMI1 / 3: 3D, Content Type, Deep Colour, x.v.Colour ™™ HDMI2: 3D, Content Type, Audio Return Channel, Deep Colour, x.v.Colour™™ • This TV supports “HDAVI Control 5” function.

---

What is the standard compliance and frequency range of the Built-in wireless LAN?

IEEE802.11a/n 5.180 GHz – 5.320 GHz, 5.500 GHz – 5.580 GHz, 5.660 GHz – 5.700 GHz IEEE802.11b/g/n 2.412 GHz – 2.472 GHz

---

What type of battery for the 3D Eyewear and how long does it last?

Coin-shaped lithium battery CR2025 Operation time: Approx. 75 hours in continuous use of the battery made by Panasonic