Free English NEWSTAR FPMA-W955 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD NEWSTAR FPMA-W955 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What should I do to ensure safety before installing the NEWSTAR FPMA-W955?
To ensure safety, please read the manual carefully before installation and follow the instructions. Store this manual in a secure place for future reference.
Who should install the wall mount bracket for the NEWSTAR FPMA-W955?
It is recommended that the Wall mount bracket for the NEWSTAR FPMA-W955 be installed by qualified personnel only.
How many people are needed to install or remove the NEWSTAR FPMA-W955?
At least two persons are needed to install or remove the NEWSTAR FPMA-W955 to avoid hazard of falling objects.
What areas should be avoided when installing the NEWSTAR FPMA-W955?
Please carefully inspect the area where the wall mount is to be installed:
Avoid places that are subject to high temperatures, humidity or contact with water.
Do not install the product near air conditioning vents or areas with excess dust and fumes.
Only install on vertical walls and avoid slanted surfaces.
Do not install in places subject to any shock or vibration.
Do not install in places subject to direct exposure to bright light, at it may cause eye fatigue when viewing the display panel.
What must be checked before installing the NEWSTAR FPMA-W955 to ensure safe installation?
To ensure safe installation, first check the structure of the wall and select a secure mounting location.
What is the minimum weight capacity the wall must sustain for the NEWSTAR FPMA-W955 installation?
The wall should be strong enough to sustain a weight of at least four times of the display and Wall mount bracket combined. The mounting location must be able to withstand earthquake or other strong shock.
What should be done regarding accessories or broken parts for the NEWSTAR FPMA-W955?
Do not modify any accessories or use broken parts. Contact your dealer with any questions.
How should screws be tightened when installing the NEWSTAR FPMA-W955?
Tighten all screws (do not exert excessive force to avoid breaking the screw or damaging its thread).
What parts are included in the NEWSTAR FPMA-W955 package?
The NEWSTAR FPMA-W955 parts include:
A (x1)
B (x2)
C (x1)
D (4mm, x1)
E (6mm, x1)
F (x1)
M4x14 (x4) (M-A)
M5x14 (x4) (M-B)
D5 (x4) (M-C)
W-A (x3)
W-B (x3)
What is the weight capacity and maximum VESA size supported by the NEWSTAR FPMA-W955?
The weight capacity for the NEWSTAR FPMA-W955 is 2.5-15 kg (5-58 lbs). The maximum supported VESA size is 75×75/100×100 mm.
What are the steps to attach the NEWSTAR FPMA-W955 wall plate to a wood stud?
Step 2a instructions for attaching the NEWSTAR FPMA-W955 wall plate to a wood stud:
Install the wall plate on a wood stud using W-A hardware.
What are the steps to attach the NEWSTAR FPMA-W955 wall plate to a solid brick or concrete wall?
Step 2b instructions for attaching the NEWSTAR FPMA-W955 wall plate to a solid brick or concrete wall:
Install the wall plate on a solid brick or concrete wall using W-B hardware.
What is the first step in assembling the NEWSTAR FPMA-W955 after preparing the wall?
Step 1 involves removing the covers from the wall mount assembly.
What is the step following the installation of the wall plate for the NEWSTAR FPMA-W955?
Step 3 is to place the covers back onto the wall mount assembly.
How do you attach the VESA plate to the screen for the NEWSTAR FPMA-W955?
Step 4 involves attaching the VESA Plate to the screen using the following hardware combinations:
Use M-A hardware to attach the plate.
Use M-B hardware to attach the plate.
Use M-C hardware to attach the plate.
How is the screen mounted onto the bracket for the NEWSTAR FPMA-W955?
Step 5 involves hanging the screen onto the bracket and securing it.
Use screw B and screw F to secure the screen to the mount arm, utilizing the 4mm spacing indicated.
How should the gas spring be adjusted on the NEWSTAR FPMA-W955 if it makes a loud clicking sound?
If the arm makes a loud clicking sound while adjusting the height, eliminate this by using a flat screwdriver to turn the screw in the arm slightly.
How can cables be routed through the cable cover for the NEWSTAR FPMA-W955?
Step 7 instruction: Run cable through the cable cover.
How are the torques adjusted on the NEWSTAR FPMA-W955 (Step 8)?
Step 8 instructs to Adjust the torques by adjusting screw D on the mount.
What adjustments can be made to the position of the NEWSTAR FPMA-W955 mount (Step 9)?
Step 9 involves adjusting the mount to your desired position, allowing for:
Swivel adjustment up to 180 degrees on both sides.
Tilt adjustment of +15 degrees or -15 degrees.
A maximum extension of 335mm.
CLICK HERE TO DOWNLOAD NEWSTAR FPMA-W955 (01) PDF DOCUMENT