NAVMAN MIVUE N676G (01) PDF MANUAL

NAVMAN MIVUE N676G (01) PDF SUMMARY:

Where should I place the dash cam in my vehicle?

The dash cam should be placed near the rear-view mirror to ensure the highest video quality.

---

Is it safe to operate the controls of the product while driving?

For your own safety, do not operate the controls of the product while driving. Using this product does not exempt the driver from taking full responsibility for his/her driving behavior, which includes observing all traffic rules and safety regulations.

---

How do I securely mount the dash cam in a vehicle?

Make sure your car is parked on level ground and follow the steps below to securely mount your dash cam in a vehicle.

Make sure the dash cam is mounted at a location that does not obstruct the driver’s view or airbag deployment.

Make sure that the camera lens is not blocked and no reflective material appears near the lens. Please keep the lens clean.

---

What if the vehicle’s windscreen is tinted?

Video quality may degrade if the vehicle’s windscreen is tinted.

---

What should I do if I change the device’s viewing angle or installation position?

The system will automatically calibrate the G-sensor during start-up. If the device’s viewing angle or installation position was changed from the original position after start-up, please turn the device off and on again to recalibrate the G-sensor. Otherwise, the G-sensor may malfunction and impact other features of the device such as event-driven recording.

---

How is the dash cam designed to be powered?

The dash cam is designed to stay connected with the vehicle power adapter to ensure optimal performance. The internal battery is designed as a backup power source for short-term use only. It allows the dash cam to save the last recording in case the vehicle’s power system fails during an incident. The internal battery is not to be used as the primary power source for prolonged periods. Battery life may vary under different conditions.

---

How should I prepare the windscreen before attaching the device mount?

Before attaching the device mount to the windscreen, it is recommended to clean the windscreen with rubbing alcohol and make sure that the installation area is free of dust, oil, and grease.

---

How do I adjust the viewing angle of the camera?

When adjusting the viewing angle, make sure that the camera’s view is parallel with the level ground and the ground/sky ratio is close to 6/4.

---

How should I route the cables?

Connect the vehicle power adapter to the cigarette lighter. Route the cables through the top ceiling and the A-pillar so that it does not interfere with driving. Make sure that the cable installation does not interfere with the vehicles airbags or other safety features.

---

What do I do if I encounter problems during installation?

If you encounter any problems during installation, contact a skilled installer (such as the service personnel of the vehicle) for assistance.

---

What type of memory card is required for recording video footage?

Navman MiVue dash cameras need a microSD card. It is very important to use a microSD card specifically designed to be used in dash cameras. It will ensure the card will be more reliable and last longer; the wrong type of card has a greater chance of failing, even after a short period of time.

---

How do I insert and remove the SD card?

To insert the SD card, hold its edges and gently insert it into the slot. To remove a card, gently push the top edge of the card inwards to release it and pull it out of the slot. Do not apply pressure to the center of the memory card.

---

How do I format the memory card?

To format the memory card (all data will be erased), press Format.

---

What should I do to ensure product compatibility with memory cards?

Navman cannot guarantee product compatibility with memory cards from all manufacturers. Please always check the specifications/warranty to ensure the memory card can be used in dash cameras and loop recording devices.

---

Why should I format the memory card?

Please format the memory card to avoid recording errors caused by missing system files or folders.

---

How often should I format the memory card?

You may need to format your memory card periodically to ensure it remains in good working condition.

---

Should I use separate MicroSD cards for the dash cam and other devices?

You should use separate MicroSD cards for the dash cam and other electronic products (such as a digital camera).

---

Should I turn off the device before removing the memory card?

You are advised to turn the device off before removing the memory card.

---

What is the minimum requirement for Navman dash cameras memory card?

The minimum requirement for Navman dash cameras is a Class 10/UHS 1 Micro SD card.

---

What will happen if I use a micro SD card that isn’t designed to be used in high-intensity recording devices?

Using a micro SD card that isn’t designed to be used in high-intensity recording devices will greatly increase the chances of memory corruption resulting in freezing problems with your device and even worse, the loss of precious video recordings.

---

Which Micro SD cards have Navman tested and confirmed are suitable for their devices?

• Sandisk High Endurance
• Samsung Pro Endurance
• Kingston Endurance

---

How often should I format my micro SD card?

Always format your micro SD card on a monthly basis to keep the memory card in good health.

---

How do I turn the dash cam on and off?

Once the vehicle engine is started, the dash cam will turn on automatically.

---

How do I shut down the dash cam?

To shut down the dash cam, press and hold the Power button until the system powers off.

---

What should I do if the dash cam stops responding?

Occasionally you may need to perform a hardware reset when the dash cam stops responding or if it appears to be “frozen” or unresponsive. To shut down the dash cam, press and hold the Power button until the system powers off. If you cannot turn the dash cam off by using the Power button, insert a small pin (such as a straightened paper clip) into the Shutdown button to shut down the dash cam.

---

Why is it important to set the correct date and time?

The system date and time must be correct in order for the videos to display accurate timestamps.

---

How do I set the date and time?

The date and time can be configured by pressing > Date/Time and using the buttons on the bottom to adjust each value.

---

How does continuous recording work?

Continuous recording will automatically commence shortly after the system is powered up. The system indicator will flash while recording is in progress. Recording can be paused by pressing. Press to return to the recording screen and resume recording.

Videos taken during continuous recording are divided into multiple clips and saved under the “Normal” folder, but recording will not stop between video clips. Once the folder has reached its allocated capacity, the system will automatically record over the oldest video saved under this folder.

---

How does event-driven recording work?

During continuous recording, if a sudden event has been detected, such as running over a road bump, vehicle collision, high-speed driving, or making a sharp turn, the G-sensor will prompt the dash cam to record the event. The sensitivity level of the G-sensor can be adjusted by going to G-sensor Sensitivity.

The actual recording will begin when an event has been detected and continue for 30 seconds. Event-driven recordings are saved in the “Event” folder. Once the folder has reached its allocated capacity, the system will automatically record over the oldest video saved under this folder. You can also press to manually activate event-driven or emergency recording while continuous recording is in progress.

---

How do I view videos and photos captured by the dash cam?

1. Press to open the Playback screen.
2. Select a folder.
3. Select a video or image then press.

---

What can I do while viewing a file?

• Press to return to the file list.
• Press to view the file.
• Press to play the previous/next video.
• Press to delete the current file.

---

What device settings can I access in the Menu screen?

Press to access the Menu screen that includes the following device settings:

• Video Resolution: Sets the recording resolution.
• Video Clip Length: Sets the length of video clips captured during continuous recording.
• EV: Sets the proper exposure level to adjust the brightness of the image.
• GPS Status: Displays GPS signal strength.
• G-sensor Sensitivity: Sets the G-sensor’s sensitivity level for triggering event-driven recording.
• LCD Standby: Sets the length of time before the display shuts off automatically.
• System Sound: Enables/disables system notification sounds
• Sound Recording: Enables/disables audio recording during video capture.
• Volume: Adjusts the volume level.
• Time Zone: Selects your local time zone.
• Date/Time: Sets the system date and time.
• Format: Formats the memory card (all data will be erased).
• Restore to Default: Restores the device to factory default settings.
• Version: Displays software information.

---

What is MiVue Manager?

MiVue Manager™ is a tool for viewing videos recorded by the MiVue™ dash cam on your PC.

---

How do I install MiVue Manager?

Download the Setup file from http://www.navman.com.au/mivue-update or http://www.navman.co.nz/mivue-update. Double-click Setup.exe and follow the on-screen prompts to install MiVue Manager.

---

What if I am prompted to install the MOV and AVI codecs for video playback?

You may be prompted to install the MOV and AVI codecs for video playback if they are missing on your computer. Search online to install the required codecs.

---

How do I play the recording files using MiVue Manager?

1. Remove the memory card from the dash cam and access the card on the computer via a card reader. You are advised to copy the recording files to your computer for backup and playback.
2. Start MiVue Manager on the computer.

By default, MiVue Manager shows the calendar and the file list on the right. When a recording file exists, you will see the date marked with “.”. Click that date to display files recorded on that date.

You can choose the file type to display: Event / Normal. To display all files in the current folder, click All. To return to the calendar view, click Calendar.

3. Double-click the desired file on the file list to start playback.

---

What are the playback controls in MiVue Manager?

• Skips to the previous/next file on the list.
• Starts or pauses the playback.
• Changes the playback speed to 1/4x, 1/2x, 1x (default), 1.5x, or 2x.
• Mutes or unmutes the volume.
• Adjusts the volume level.
• Plays the video in full screen.
• Displays the playback progress. You can click on a point along the track bar to move directly to a different location for the playback.

---

What driving information can I check during playback in MiVue Manager?

During playback, you can check more driving information from the dashboard panel and the G-sensor chart that are displayed below the video playback screen. On the dashboard panel, click to display the map screen.

---

What does the G-sensor chart display?

The G-sensor chart displays data in 3-axis waveform about the car’s shift forward/backward (X), to the right/left (Y) and upward/downward (Z).

---

What can I do with the tool bar in MiVue Manager?

• Selects the folder that stores the recording files.
• Previews and prints the current video image.
• Saves the selected files to the specified location on your computer.
• Captures and saves the current video image to the specified location on your computer.

---

What are the Settings Menu items in MiVue Manager?

• Change Language: Sets the display language of MiVue Manager.
• Change Skin: Sets the color scheme of MiVue Manager.
• Check for Update: Checks if there is any new version of MiVue Manager. Internet access is required for this feature.
• About: Displays the version and copyright information of MiVue Manager.

---

What other functions are available in MiVue Manager?

• Exports the GPS information of the selected file in the KML format to the specified location on your computer.
• Uploads the selected file to YouTube™™.
• In the playlist, the “F” and “R” marks displayed on a filename indicate the video is paired with a corresponding front video (F) or rear video ®. The video will be shown in PIP (picture-in-picture) mode. You can switch between front and rear videos.

---

What are the safety precautions for the vehicle power adapter?

• Use only the vehicle power adapter supplied with your device. Use of another type of the vehicle power adapter may result in malfunction and/or danger.
• This product is intended to be supplied by a LISTED Power Unit marked with “LPS”, “Limited Power Source” and output rated + 5Vdc/2A.
• Do not use the vehicle power adapter in a high moisture environment. Never touch the vehicle power adapter when your hands or feet are wet.
• Allow adequate ventilation around the vehicle power adapter when connected to the device. Do not cover the vehicle power adapter with paper or other objects that will reduce cooling. Do not use the vehicle power adapter while it is inside a carrying case.
• Connect the vehicle power adapter to a proper power source. The voltage requirements are found on the product case and/or packaging.
• Do not use the vehicle power adapter if the cord becomes damaged.
• Do not attempt to service the unit. There are no serviceable parts inside. Replace the unit if it is damaged or exposed to excess moisture.

---

What are the safety precautions for the battery?

• This unit contains a non-replaceable internal Lithium-Ion battery. The battery can burst or explode, releasing hazardous chemicals. To reduce the risk of fire or burns, do not disassemble, crush, puncture, or dispose of in fire or water.
• Risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.
• Replace only with the same or equivalent type recommended by the manufacturer.
• The battery must be recycled or disposed of properly.
• Use the battery only in the specified equipment.
• Electronic devices using a lithium – ion battery such as Mobile phones, GPSs, and cameras are designed to operate at a temperature range of approximately 0°C to 50°C. Beyond these temperature limits, there may be a risk of battery failure, when these electronic goods are exposed to extreme heat conditions for long periods.
• It is recommended that you do not use your device in a humid, wet, and/or corrosive environment. Do not put, store, or leave your device in or near a heat source, in a high-temperature location, in strong direct sunlight, and do not expose it to temperatures over 60°C (140°F). Failure to follow these guidelines may cause the Lithium-ion battery to leak acid, become hot, explode, or ignite and cause injury and/or damage.
• Do not pierce, open, or disassemble the battery. If the battery leaks and you come into contact with the leaked fluids, rinse thoroughly with water and seek medical attention immediately.
• For safety reasons, and to prolong the lifetime of the battery, charging should not occur at low (below 0°C/32°F) or high (over 45°C/113°F) temperatures.
• It is highly recommended you use your product only with the supplied DC power lead (vehicle power adapter/battery cable) and AC adapter (home charger) for battery charging.

---

How should I care for my device?

• Keep your device away from excessive moisture and extreme temperatures.
• Avoid exposing your device to direct sunlight or strong ultraviolet light for extended periods of time.
• Do not place anything on top of your device or drop objects on your device.
• Do not drop your device or subject it to severe shock.

---

What should I do if my device is exposed to temperature changes?

Do not subject your device to sudden and severe temperature changes. This could cause moisture condensation inside the unit, which could damage your device. In the event of moisture condensation, allow the device to dry out completely before use.

---

How should I clean the screen of my device?

The screen surface can easily be scratched. Avoid touching it with sharp objects. Non-adhesive generic screen protectors designed specifically for use on portable devices with LCD panels may be used to help protect the screen from minor scratches. Never clean your device with it powered on. Use a soft, lint-free cloth to wipe the screen and the exterior of your device. Do not use paper towels to clean the screen.

---

What should I avoid doing when maintaining my device?

• Never attempt to disassemble, repair, or make any modifications to your device. Disassembly, modification, or any attempt at repair could cause damage to your device and even bodily injury or property damage and will void any warranty.
• Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as your device, its parts, or accessories.
• To discourage theft, do not leave the device and accessories in plain view in an unattended vehicle.
• Overheating may damage the device.

---

What are the limitations of GPS?

• GPS is operated by the United States government, which is solely responsible for the performance of GPS. Any change to the GPS system can affect the accuracy of all GPS equipment.
• GPS satellite signals cannot pass through solid materials (except glass). When you are inside a tunnel or building, GPS positioning is not available. Signal reception can be affected by situations such as bad weather or dense overhead obstacles (e.g. trees, tunnels, viaducts, and tall buildings).
• The GPS positioning data is for reference only.

---

How do I obtain warranty service?

To obtain your warranty service:

1. Contact Navman to obtain a Return Materials Authorization number (RMA). You can reach Navman using the Contact Details outlined or through your authorized Navman dealer.
2. Pack the product, a copy of your dated purchase receipt, your address and telephone number, and any other information Navman requests as part of the return authorization process (such as any return authorization form you receive) in sturdy packing material.
3. Ship the product and the other required items to Navman at the address specified in the Contact Details, or return it to the retail outlet from which it was purchased, on or up to the end of the Warranty Period. You should retain proof of shipping to evidence the date of shipment. Please send the item by registered post for tracking purposes.

---

What information should I provide when returning my product?

• Sender’s name
• Sender’s address
• Sender’s phone
• Sender’s email
• RMA number (compulsory – please contact the support number above for your RMA number)

---

What are the shipping responsibilities when returning a product for warranty service?

You must pay for shipping and any insurance to get the product to Navman at the applicable address. Except where otherwise provided by Consumer Guarantees, you assume all risk of loss or damage to the product until it arrives at Navman’s facility. Navman will pay for shipping of the new or repaired product back to you at the return address provided only and assume all risk of loss or damage to the product until it arrives at the address you specify. You must request, and pay for, any different shipping method.

---

What is the warranty period?

The “Warranty Period” is one year from the date of original retail purchase in Australia and New Zealand, as supported by a complete, legible and dated copy of the original sales receipt.

---

What is the additional product information regarding the microSD card?

To ensure optimal performance please ensure you always use a microSD card with a capacity up to 128GB that is designed for use in dash cameras or loop recording devices.

---

Is the Dash Cam designed to be used without being attached to the power adapter?

Your Navman Dash Cam device is designed so that it is constantly powered in your vehicle using the provided power adapter. The Dash Cam is not designed to be used without being attached to the power adapter provided.