LG LM-G900EM (01) PDF MANUAL


Post questions, comments, reviews or page errors in the comment box below.

Your File is Ready … Download PDF

CLICK HERE TO DOWNLOAD LG LM-G900EM (01) PDF MANUAL


PDF Content Summary: E N G L I S H USER GUIDE LM-G900EM Copyright ©2020 LG Electronics, Inc. All rights reserved.

MFLXXXXXXXX (1.0) lg.com About this user guide ENGLISH

Thank you for choosing this LG product. Please carefully read this user guide before using the device for the first time to ensure safe and proper use. • Always use genuine LG accessories. The supplied items are designed only for this device and may not be compatible with other devices. • Descriptions are based on the device default settings. • Default apps on the device are subject to updates, and support for these apps may be withdrawn without prior notice. If you have any questions about an app provided with the device, please contact an LG Service Centre. For user-installed apps, please contact the relevant service provider. • Modifying the device’s operating system or installing software from unofficial sources may damage the device and lead to data corruption or data loss. Such actions will violate your LG licence agreement and void your warranty. • Some content and illustrations may differ from your device, depending on the area, service provider, software version, or OS version, and are subject to change without prior notice. • Software, audio, wallpaper, images, and other media supplied with your device are licenced for limited use. If you extract and use these materials for commercial or other purposes, you may be infringing copyright laws. As a user, you are fully responsible for the illegal use of media. • Additional charges may incur for data services, such as messaging, uploading, downloading, auto-syncing and location services. To avoid additional charges, select a data plan suitable to your needs. Contact your service provider to obtain additional details. • This user guide is written in major languages for each country. Depending on the language used, content may partly differ. 1 Instructional notices WARNING: Situations that could cause injury to the user and third parties. CAUTION: Situations that may cause minor injury or damage to the device. NOTE: Notices or additional information. About this user guide 2

Table of contents 6 Guidelines for safe and efficient use01 Custom-designed Features 16 Camera features 21 Audio recording features 24 Google Assistant 26 HD Audio recording features 28 Fingerprint recognition 32 Multi-tasking feature 37 AOD(always-on display) 38 Notes on Water Resistant Properties 02 Basic Functions 42 Product components and accessories 43 Parts overview 47 Getting to know stereo ear microphone 48 Turning the power on or off 49 Installing the SIM card 52 Inserting the memory card 53 Removing the memory card 53 Battery 57 Touch screen 60 Home screen 69 Screen lock 72 Memory card encryption 73 Taking screenshots 74 Entering text 81 Content sharing 83 Do not disturb

3

03 Useful Apps 85 Installing and uninstalling apps 87 App Shortcuts 88 Phone 92 Messaging 93 Camera 113 Gallery 119 Contacts 122 QuickMemo+ 125 Clock 127 Music 128 Game Launcher 128 Calculator 128 ThinQ 129 Smart Doctor 129 LG Mobile Switch 129 App trash 130 SmartWorld 131 RemoteCall Service 131 Cell Broadcast 132 Google apps 04 Settings 136 Settings 136 Network & internet 143 Connected devices 148 Sound 150 Display 152 Lock screen & security 154 Privacy 155 Location 155 Extensions 159 Apps 159 Battery 160 Storage 161 Accounts 161 Digital Wellbeing & parental controls 161 Google 162 System 166 Accessibility

Table of contents 4 05 Appendix 169 LG Language Settings 169 LG Bridge 170 Phone software update 172 Anti-Theft Guide 173 Open Source Software Notice Information 173 Regulatory information (Regulation ID number, E-labeling, etc.) 174 Trademarks 175 Laser safety statement 175 DECLARATION OF CONFORMITY 176 Contact office for compliance of this product 176 Wi-Fi (WLAN) 177 More information 181 FAQ Table of contents 5 Guidelines for safe and efficient use Please read these simple guidelines. Not following these guidelines may be dangerous or illegal. Should a fault occur, a software tool is built into your device that will gather a fault log. This tool gathers only data specific to the fault, such as signal strength, cell ID position in sudden call drop and applications loaded. The log is used only to help determine the cause of the fault. These logs are encrypted and can only be accessed by an authorised LG Repair centre should you need to return your device for repair. 6 Information about the RF exposure from FCC In August 1996, the Federal Communications Commission (FCC) of the United States, with its action in Report and Order FCC 96-326, adopted an updated safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both international and U.S. standards. The design of this device complies with FCC guidelines and these international standards. Part 15.19 statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Part 15.21 Statement Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. Body-worn Operation This device was tested for typical bodyworn operations with the back of the device kept 0.39 inches (1cm) between the user’s body and the back of the device. To comply with FCC RF exposure requirements, a minimum separation distance of 0.39 inches (1cm) must be maintained between the user’s body and the back of the device. Any beltclips, holsters, and similar accessories containing metallic components may not be used. Body-worn accessories that cannot maintain 0.39 inches (1cm) separation distance between the user’s body and the back of the device, and have not been tested for typical body-worn operations may not comply with FCC RF exposure limits and should be avoided. Guidelines for safe and efficient use 7 Part 15.105 Statement This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Product care and maintenance • Use only in-box accessories which are authorised by LG. LG does not guarantee any damage or failure which is caused by third party accessories. • Some contents and illustrations may differ from your device without prior notice. • Do not disassemble this unit. Take it to a qualified service technician when repair work is required. • Repairs under warranty, at LG’s discretion, may include replacement parts or boards that are either new or reconditioned, provided that they have functionality equal to that of the parts being replaced. • Keep away from electrical appliances such as TVs, radios and personal computers. • The unit should be kept away from heat sources such as radiators or cookers. • Do not drop. • Do not subject this unit to mechanical vibration or shock. • Switch off the device in any area where you are required to by special regulations. For example, do not use your device in hospitals as it may affect sensitive medical equipment. Guidelines for safe and efficient use 8 • Do not handle the device with wet hands while it is being charged. It may cause an electric shock and can seriously damage your device. • Do not charge a handset near flammable material as the handset can become hot and create a fire hazard. • Use a dry cloth to clean the exterior of the unit (do not use solvents such as benzene, thinner or alcohol). • Do not charge the device when it is on soft furnishings. • The device should be charged in a well ventilated area. • Do not subject this unit to excessive smoke or dust. • Do not keep the device next to credit cards or transport tickets; it can affect the information on the magnetic strips. • Do not tap the screen with a sharp object as it may damage the device. • Do not expose the device to liquid or moisture. • Use accessories like earphones cautiously. Do not touch the antenna unnecessarily. • Do not use, touch or attempt to remove or fix broken, chipped or cracked glass. Damage to the glass display due to abuse or misuse is not covered under the warranty. • Your device is an electronic device that generates heat during normal operation. Extremely prolonged, direct skin contact in the absence of adequate ventilation may result in discomfort or minor burns. Therefore, use care when handling your device during or immediately after operation. • If your device gets wet, immediately unplug it to dry off completely. Do not attempt to accelerate the drying process with an external heating source, such as an oven, microwave or hair dryer. Guidelines for safe and efficient use 9 • The liquid in your wet device, changes the colour of the product label inside your device. Damage to your device as a result of exposure to liquid is not covered under your warranty. • A mobile device requires proper air circulation in order to dissipate heat. Direct skin contact and inadequate circulation of air flow to the device may cause the device to overheat. The device must be at least 1.0cm from between the user’s body. • Prevent dust of any other foreign substances from getting into the Charger/ USB cable port. It may cause heat or fire. • Avoid exposing the device to low air pressure at high altitude. • Do not expose the device to extremely low air pressure. Otherwise, it can cause explosion of the battery or leakage of flammable liquid or gas. Efficient device operation Electronics devices All devices may receive interference, which could affect performance. • Do not use your device near medical equipment without requesting permission. Please consult your doctor to determine if operation of your device may interfere with the operation of your medical device. • Pacemaker manufacturers recommend that you leave at least 15 cm of space between other devices and a pacemaker to avoid potential interference with the pacemaker. • This device may produce a bright or flashing light. • Some hearing aids might be disturbed by devices. • Minor interference may affect TVs, radios, PCs etc. • Use your device in temperatures between 0 ºC and 35 ºC, if possible. Exposing your device to extremely low or high temperatures may result in damage, malfunction, or even explosion. Guidelines for safe and efficient use 10 Road safety Check the laws and regulations on the use of devices in the area when you drive. • Do not use a hand-held device while driving. • Give full attention to driving. • Pull off the road and park before making or answering a call if driving conditions so require. • RF energy may affect some electronic systems in your vehicle such as car stereos and safety equipment. • When your vehicle is equipped with an air bag, do not obstruct with installed or portable wireless equipment. It can cause the air bag to fail or cause serious injury due to improper performance. • If you are listening to music whilst out and about, please ensure that the volume is at a reasonable level so that you are aware of your surroundings. This is of particular importance when near roads. Avoid damage to your hearing To prevent possible hearing damage, do not listen at high volume levels for long periods. Damage to your hearing can occur if you are exposed to loud sound for long periods of time. We therefore recommend that you do not turn on or off the handset close to your ear. We also recommend that music and call volumes are set to a reasonable level. • When using headphones, turn the volume down if you cannot hear the people speaking near you, or if the person sitting next to you can hear what you are listening to. • Excessive sound pressure from earphones and headphones can cause hearing loss. Guidelines for safe and efficient use 11 Glass Parts Some parts of your device are made of glass. This glass could break if your device is dropped on a hard surface or receives a substantial impact. If the glass breaks, do not touch or attempt to remove it. Stop using your device until the glass is replaced by an authorised service provider. Blasting area Do not use the device where blasting is in progress. Observe restrictions and follow any regulations or rules. Potentially explosive atmospheres • Do not use your device at a refueling point. • Do not use near fuel or chemicals. • Do not transport or store flammable gas, liquid or explosives in the same compartment of your vehicle as your device or accessories. In aircraft Wireless devices can cause interference in aircraft. • Turn your device off before boarding any aircraft. • Do not use it on the ground without permission from the crew. Children Keep the device in a safe place out of the reach of small children. It includes small parts which may cause a choking hazard if detached. Emergency calls Emergency calls may not be available on all mobile networks. Therefore you should never depend solely on your device for emergency calls. Check with your local service provider. Guidelines for safe and efficient use 12 Battery information and care • You do not need to completely discharge the battery before recharging. Unlike other battery systems, there is no memory effect that could compromise the battery’s performance. • Use only LG batteries and chargers. LG chargers are designed to maximise the battery life. • Do not disassemble or short-circuit the battery. • Keep the metal contacts of the battery clean. • Replace the battery when it no longer provides acceptable performance. The battery pack may be recharged hundreds of times before it needs replacing. • Recharge the battery if it has not been used for a long time to maximise usability. • Do not expose the battery charger to direct sunlight or use it in high humidity, such as in the bathroom. • Do not leave the battery in hot or cold places, as this may deteriorate battery performance. • Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. • Always unplug the charger from the wall socket after the device is fully charged to save unnecessary power consumption of the charger. • Actual battery life will depend on network configuration, product settings, usage patterns, battery and environmental conditions. • Make sure that no sharp-edged items such as animal’s teeth or claws, come into contact with the battery. This could cause a fire. • Power Consumption (Networked Standby Mode) : X.X W Securing personal information • Make sure to protect your personal information to prevent data leakage or misuse of sensitive information. • Always back up important data while using the device. LG is not responsible for any data loss. • Make sure to back up all data and reset the device when disposing of the device to prevent any misuse of sensitive information. Guidelines for safe and efficient use 13 • Read the permission screen carefully while downloading applications. • Be cautious using the applications that have access to multiple functions or to your personal information. • Check your personal accounts regularly. If you find any sign of misuse of your personal information, ask your service provider to delete or change your account information. • If your device is lost or stolen, change the password of your account to secure your personal information. • Do not use applications from unknown sources. Notice for Battery replacement • Li-Ion Battery is a hazardous component which can cause injury. • Battery replacement by a non-qualified professional can cause damage to your device. • Do not replace the battery by yourself. The battery can be damaged, which can cause overheat and injury. The battery must be replaced by a qualified professional. The battery should be recycled or disposed separately from household waste. • In case this product contains a battery incorporated within the product which cannot be readily removed by end-users, LG recommends that only qualified professionals remove the battery, either for replacement or for recycling at the end of this product’s working life. To prevent damage to the product, and for their own safety, users should not attempt to remove the battery and should contact LG Service Helpline, or other independent service providers for advice. • Removal of the battery will involve dismantling of the product case, disconnection of the electrical cables/ contacts, and careful extraction of the battery cell using specialised tools. If you need the instructions for qualified professionals on how to remove the battery safely, please visit lge.com/global/sustainability/environment/take-back-recycling. Guidelines for safe and efficient use 14 01 Custom-designed Features Camera features Timelapse Control You can record Time-lapse videos optimized for the situation. Videos can be recorded with optimal speed and steady motion by analyzing a variety of shooting environments. The time-lapse speed can be automatically adjusted according to the shooting target and environment. It is also possible to select the time-lapse speed manually. 1 Tap and select Time-lapse by swiping camera modes. 2 Tap to record a video. • You can change a zoom and time-lapse speed during time-lapse recording. • To pause the recording, tap . To continue the recording, tap . Custom-designed Features 16 3 Tap to stop recording. • The recorded video will be saved in Gallery. • Audio is not recorded during Time-lapse recording. 3D AR Effect Z-camera on the back of the product allows you to shoot realistic 3D AR Effect by recognising facial contours in greater detail. Because your face is accurately recognized, you can shoot a sticker without your hands appearing even if your face is partially covered by your hands. 1 Tap and select Sticker by swiping camera modes. 2 Select . 3 Swipe the sticker list left or right to select the AR sticker to use. • The face detected by the camera is scanned in 3D. Custom-designed Features 17 4 Tap to take a photo. • The photo is taken with the 3D AR Effect applied. • The 3D scanning feature of Z-camera is available only for close-up portrait shooting. 3D Photo Effect 3D Photo Effect allows you to take 3D photos that give a greater feeling of depth to portraits by using the Z-camera on the back of the product. Photos taken with 3D Photo Effect can be viewed as moving pictures in the Gallery app. You can share 3D photos via Facebook, which supports the Google Depth standard. 1 Tap and select Portrait by swiping camera modes. 2 Select 3D Photo Effect by swiping effect modes for Portrait. Custom-designed Features 18 3 Tap to take a photo. • The photo will be saved in Gallery. • appears on the image taken with 3D Photo Effect. 4 Select a 3D photo from Gallery or Preview and tap to apply a photo effect. • Select Save a copy or OK after applying the effect. • This feature is available only when taking a photo with the rear camera. • When you see the message “3D Photo Effect is available”, press to take a photo. Otherwise, the 3D Photo Effect will not be applied to the saved photo. Night View You can take vivid and clear night photos. Night View will run automatically when you take a photo in a low light conditions. You can also take clear night scenes by using the Night View feature manually. 1 Tap and select More by swiping camera modes.

2 Tap Night View. • Select a zoom from x1.0 / / .

Custom-designed Features 19 3 Tap to take a photo. • To adjust the brightness of the photo, slide left or right. • Hold steady and firm so that the camera does not shake while taking a photo. Custom-designed Features 20 Audio recording features Video recording with specialized audio recording options You can record a video using three different voice recording options to suit your purpose. 1 Tap and select Video by swiping camera modes. 2 Tap and select Basic, ASMR Recording, or Voice Bokeh by swiping audio options. Custom-designed Features 21 Basic You can record a video with stable stereo sound. ASMR Recording With four sensitive microphones in the device, you can record an ASMR video. Voice Bokeh You can emphasize the voice of a subject by reducing ambient noise. • To reduce ambient noise, drag the slide bar to . Recording ASMR sounds This feature allows you to record the audio clearly and precisely by amplifying the sound from the microphones. 1 Tap the Essentials HD Audio Recorder and tap ASMR. Custom-designed Features 22 2 Tap to record the audio. • To pause the recording, tap . To continue the recording, tap . 3 Tap to end the audio recording. LG 3D Sound Engine LG 3D Sound Engine feature allows you to hear stereoscopic and optimized sound. When playing music or video, you can enjoy stereoscopic and immersive sound as if you were listening in the field. 1 Drag the notifications panel downwards. 2 Tap to turn on or off the LG 3D Sound Engine feature. Or tap Settings Sound Sound quality and effects LG 3D Sound Engine and tap to activate it. • You must connect an external audio device by wire to use this feature, which does not support wireless devices or Bluetooth® devices. Custom-designed Features 23 Google Assistant Google Assistant overview Your device has the built-in Google Assistant feature. Find answers and get things done while on-the-go. • To use this feature, first connect to the network and sign in to your Google Account. Launching Google Assistant 1 Press the Google Assistant key on the left side of the device. or Swipe diagonally from a bottom edge of the screen. 2 Tap GET STARTED. 3 Follow the on-screen instructions. • The device saves your voice data for recognition. 4 Set whether to use the voice match unlock function. • If you use the voice match unlock function, you can unlock the device even when the device screen is turned off or the device is charging by saying “OK Google” or “Hey Google”. • This feature may be more vulnerable to security than the other screen locks, such as Pattern, PIN, and Password. When a similar voice or your recorded voice is used, the screen may be unlocked. • To use this feature, on the home screen, tap Settings Lock screen & security Secure lock settings Smart Lock, and then use the screen lock method you set to unlock the device. Tap Voice Match, then tap Unlock with Voice Match , then enter the currently used unlock method again. Note that Swipe is excluded. • You need to unlock the device by using the specified method if you fail to unlock the device with voice recognition. See Setting a screen lock for details. Custom-designed Features 24 5 Tap Save. Accessing by Voice 1 When the home screen is turned off or locked, say “OK Google” or “Hey Google”. 2 When the Google Assistant screen appears, say a command or ask a question. Accessing from Home Screen 1 Press the Google Assistant key on the left side of the device. or Swipe diagonally from a bottom edge of the screen. 2 Say a command or question when you see on the bottom of the screen. • In an environment where Wi-Fi or mobile data connection is poor, the Google Assistant function may be restricted and the speech recognition accuracy rate may be lowered. • If the speech is ambiguous, the microphone is covered, a media player is playing, or the surrounding is loud, the speech recognition accuracy rate may be lowered. When you are using the product via voice commands, say with accurate pronunciation in a quite environment for better speech recognition accuracy. Custom-designed Features 25 HD Audio recording features The HD Audio Recorder allows you to configure the audio settings manually so that you can record audio based on your environment. Recording modes You can record a high definition audio file by selecting and configuring the desired audio mode to suit the recording environment. On the home screen, tap Essentials HD Audio Recorder . Normal You can record audio without extra settings. ASMR You can use a highly sensitive microphone to record minute details of the sound vividly. Concert You can record audio in a concert or other music event. Custom You can manually configure the desired settings to record audio. Studio Mode With Studio mode, you can play an audio file or music and record your voice at the same time, create a chord by recording your voice multiple times, and record your comments over the presenter’s or speaker’s original audio file. 1 On the home screen, tap Essentials HD Audio Recorder Custom. 2 Tap . 3 Select an audio file to use as background music. 4 Tap to record voice. Custom-designed Features 26 5 Tap to save the recorded file. • Background music can only be played through earphones. Make sure to plug in earphones before using this feature. Other useful features for use of the HD Audio Recorder app GAIN You can adjust the sensitivity of the sound recorded by the microphone. The higher the GAIN value is set, the more sensitively the sound is recorded. LCF You can filter any low-pitched noises such as the low hum of the air conditioner. The higher the LCF (Low Cut Filter) value is set, the better high-frequency noises are filtered. LMT It can prevent clipping of the recorded sound. The higher the LMT (Limiter) value is set, the greater the likelihood that low frequency sounds will not get clipped. • To change additional settings, tap Settings, then customise the file type, bit depth, sampling rate and other settings. • When you select the Concert or Custom mode with earphones connected, appears. Tap and then select the microphone to use. • You can monitor the sound quality with the connected earpiece while recording audio. While recording audio in Studio mode, sound monitoring is not supported. You can hear only the background music. Custom-designed Features 27 Fingerprint recognition Fingerprint recognition overview You must register your fingerprint on your device first before using the fingerprint recognition function. You can use the fingerprint recognition function in the following cases: • To unlock the screen. • To view the locked content in the Gallery. • Confirm a purchase by signing into an app or identifying yourself with your fingerprint. • You can use fingerprint data for user authentication. There is a possibility that the fingerprint sensor might recognise a different but very similar fingerprint as the same registered fingerprint. To strengthen security, it is recommended that you use the pattern, PIN, or password method for unlocking the screen. • If the device cannot detect your fingerprint or you forgot the value specified for registration, visit the nearest LG Customer Service Centre with your device and ID card. Custom-designed Features 28 Precautions for fingerprint recognition Fingerprint recognition accuracy may decrease due to a number of reasons. To maximise the recognition accuracy, check the following before using the device. • At the bottom center of the product’s screen, there is a built-in sensor that recognises fingerprints. Be careful not to scratch or damage the fingerprint sensor with metal objects such as coins or keys. • If there are foreign substances (sweat, lotion, water, dirt, grease, etc.) on the fingerprint sensor or on the finger to be put on the sensor, fingerprint recognition may not work properly. Wipe the sensor and the finger clean and remove all moisture before putting the finger on the sensor. • If the finger’s surface is rough due to it being scarred or pruney from water, the sensor may not be able to recognise the fingerprint. In such a case, register another fingerprint. • If you bend your finger or use the fingertip only, your fingerprint may not be recognised. Make sure that your finger covers the entire surface of the fingerprint sensor. • Scan only one finger for each registration. Scanning more than one finger may affect fingerprint registration and recognition. • The device may generate static electricity if the surrounding air is dry. If the surrounding air is dry, avoid scanning fingerprints, or touch a metallic object such as a coin or a key before scanning fingerprints to remove static electricity. Custom-designed Features 29 Registering fingerprints You can register and save your fingerprint on the device to use fingerprint identification. 1 On the home screen, tap Settings Lock screen & security Fingerprints. • A lock screen must be set in order to be able to use this feature. • If the screen lock is not active, configure the lock screen by following the on-screen instructions. See Setting a screen lock for details. 2 Check the location of the fingerprint sensor at the bottom center of the screen, and lightly put the finger on the sensor. • Make sure that the finger fully covers the fingerprint sensor. 3 Follow the on-screen instructions. • Until the fingerprint registration is completed, move the same finger around on the sensor little by little. • Put the finger on the sensor. When you feel a vibration, remove the finger from the sensor. 4 When the fingerprint registration is done, tap OK. • Tap Add more to register another fingerprint. Since the fingerprint recognition success rate depends on the condition of the registered fingerprint, it is recommended that you register several different fingerprints. Custom-designed Features 30 Managing fingerprints You can edit or delete registered fingerprints. 1 On the home screen, tap Settings Lock screen & security Fingerprints. 2 Unlock according to the specified lock method. 3 From the fingerprint list, tap a fingerprint to rename it. To delete it, tap . Displaying the fingerprint icon when screen if off You can set how to display the fingerprint sensor location on the screen when the screen is off. 1 On the home screen, tap Settings Lock screen & security Fingerprints. 2 Unlock the screen via the set method. 3 Check if is enabled for the Tap to show icon when screen is off option. If you don’t want to use the function, disable the function by dragging . Unlocking the screen with a fingerprint You can unlock the screen or view the locked content by using your fingerprint. Activate the desired function: 1 On the home screen, tap Settings Lock screen & security Fingerprints. 2 Unlock according to the specified lock method. 3 On the fingerprint settings screen, activate the desired function: • Screen lock: Unlock screen with a fingerprint. • Content lock: Unlock content with a fingerprint. To do this, make sure that the content lock is set. Custom-designed Features 31

Multi-tasking feature Recent Uses Screen Swipe the Home button upward and hold to view the recent use history. Pop-up window You can open multiple apps on the screen and easily switch between them at any time. 1 Swipe up on from the bottom of the screen. 2 Tap the app icon on the top left of the app screen and select Pop-up window. • If you tap the app icon, the App info, Multi window, Pop-up window and Pin app options appear. 3 The app appears in the form of a pop-up window on the screen. • This feature may not be available in some apps or screens.

Custom-designed Features 32 Using the pop-up window • : Minimizes the pop-up window. The pop-up window is minimized into the app icon floating on the screen, which can be moved anywhere you want. • : Expands the app to full screen. • : Closes the app. • To move the pop-up window: Drag the top of the pop-up window. • To adjust the size of the pop-up window: Drag the left, right or bottom edge of the pop-up window. • You can open up to 5 apps using the pop-up windows. • To select an app from the opened apps, tap one of the pop-up windows. The selected pop-up window comes to the front. • Pop-up windows cannot be moved to the status bar or navigation bar area. Custom-designed Features 33 Using the app folder for pop-up windows If you tap on the pop-up window, the pop-up window is minimized into the app icon. You can move the app icon anywhere you want by dragging it. If two or more pop-up windows are minimized, the app folder is created to contain the app icons. • The recently-used app icon is used as the app folder icon. If you tab the icon, all the icons for the minimized pop-up windows appear in the app folder. Custom-designed Features 34 • If you touch and hold the app folder for pop-up windows and drag the app folder into Remove, the app folder will be removed. • To remove one of the apps from the app folder, open the app folder and drag the app icon out of the app folder. Multi window When using gesture navigation (by default) 1 Swipe up on from the bottom of the screen. • Recently-used apps appear. • If you tap the app icon, the App info, Multi window, Pop-up window and Pin app options appear. Custom-designed Features 35 2 Tap the app icon on the top left of the app to be displayed in the multiwindow and select Multi window. • The selected app appears at the top half of the screen. 3 Tap the other app to be displayed in the multi window. • The selected app appears at the bottom half of the screen. When using Buttons only navigation 1 Tap on the navigation bar. • Recently-used apps appear. • If you tap the app icon, the App info, Multi window, Pop-up window and Pin app options appear. 2 Tap the app icon on the top left of the app to be displayed in the multiwindow and select . • The selected app appears at the top half of the screen. 3 Tap the other app to be displayed in the multi window. • To adjust the size of the split screen, drag the bar on the center of the screen. • To deactivate the multi window feature, drag the center bar up or down to the end of the screen. • The multi window feature is not supported in some LG apps or apps downloaded from the Play Store. Custom-designed Features 36 AOD(always-on display) You can view the date, time or signature when the main screen is turned off. Swipe the bottom of the Always-on display screen to activate features including Camera, Capture+, Wi-Fi, sound settings, Bluetooth®, Flash, Music and more. 1 On the home screen, tap Settings Display AOD(always-on display). 2 Select the image you want to display and tap SAVE. • Tap the desired image among Digital clock, Analog clock, Dual clock, Signature or Image. • Tap Show display and select Tap to show for 10 seconds or Always show. • Drag Quick tools & music player to swipe over the status icons for Quick tools and the music player. • Tap AI Pick to see useful information provided based on Context Awareness. • To enhance brightness for the Always-on display feature, tap Brighter display. • To view the help for Always-on display, tap Help. • The battery may drain faster when you use Always-on display. Turn this feature off to save battery power. • To deactivate Always-on display feature, on the home screen, tap Settings Display AOD(always-on display), and then tap . Custom-designed Features 37 Notes on Water Resistant Properties This product is water and dust resistant in compliance with the Ingress Protection rating IP68. Your product has undergone testing in a controlled environment and is proven to be water and dust resistant in certain circumstances (meets the requirements of classification IP68 as described by the international standard IEC 60529 - Degrees of Protection provided by Enclosures [IP Code]; test conditions: 15-35 ºC, 86-106kPa, 1.5 meter, for 30 minutes). Do not expose the device in conditions that are different from the test conditions. Results may vary in actual use. WARNING Despite a rating of IP68, your device is not impervious to conditions not tested in LG’s controlled environment. Please note that any damages that occur due to such causes changes the colour of the LDI (Liquid Damage Indicator). If the colour of LDI located inside the product changes, the product is to be considered ineligible for any free-of-charge repair services provided under the product’s limited warranty. Avoid exposing the product to environments with excessive dust or moisture. Do not use the product in the following environments. Do not immerse the product in any liquid chemicals (soap, etc.) other than water. Do not immerse the product in salt water, including seawater. Do not immerse the product in a hot spring. Do not swim with this product. Custom-designed Features 38 Do not place the product directly on sand (such as at a beach) or mud. Do not immerse your product in water deeper than approximately 1.5 meters. Do not immerse your product in water for longer than 30 minutes. • If your product becomes wet be sure to wipe the microphone, speaker, and stereo jack with a dry cloth before use. • Should your product or your hands become wet, dry them before handling the product. • Do not use the product in places where it may be sprayed with high pressure water (e.g. near a faucet or shower head) or submerge it in water for extended periods of time, as the product is not designed to withstand high water pressure. • This product is not resistant to shock. Do not drop the product or subject it to shock. Doing so might damage or deform the main unit, causing water leakage. • The product’s water and dust resistant features may be damaged by dropping or receiving an impact. • If the product gets wet, use a clean, soft cloth to dry it thoroughly. • The touch screen and other features may not work properly if the device is used while wet. • Your product is water resistant only when the SIM/Memory card tray is properly inserted into the product. • Do not open or close the SIM/Memory card tray while the product is wet or immersed in water. Exposing the open tray to water or moisture may damage the product. • The SIM/Memory card tray contains rubber [packing] to help prevent dust, water, or moisture from entering the product. Do not damage the rubber [packing] as this may allow dust, water, or moisture to enter your product and cause damage. Custom-designed Features 39 • Failure to follow the provided instructions may invalidate your device’s limited warranty. • If the device is wet, the LDI located inside the device changes in colour. In this case, the device is ineligible for any free-of-charge repair services provided under the device’s limited warranty. • Despite a rating of IP68, your device is not completely impervious to water in any situation. Custom-designed Features 40 02 Basic Functions Product components and accessories The following items are included with your device.

• Device • Stereo headset • USB cable • Ejection pin • Charger • Quick Start Guide

• The items described above may be optional. • The items supplied with the device and any available accessories may vary depending on the area and service provider. • Always use genuine LG Electronics accessories. Using accessories made by other manufacturers may affect your device's call performance or cause malfunctions. This may not be covered by LG's repair service. • Some of the device parts are made of tempered glass. If you drop your device on a hard surface or subject it to severe impact, the tempered glass may be damaged. If this happens, stop using your device immediately and contact an LG Customer Service Centre. • If any of these basic items are missing, contact the dealer from which you purchased your device. • To purchase additional items, contact an LG Customer Service Centre. • Some items in the product box are subject to change without notice. • The appearance and specifications of your device are subject to change without prior notice for product improvement. • Device specifications may vary depending on the area or service provider. • Remove the protective film from the Fingerprint sensor before using the fingerprint recognition feature. Basic Functions 42 Parts overview Basic Functions 43 Do NOT attempt to remove the back cover by yourself. • Doing so may severely damage the battery and device, which could cause overheating, fire, and injury. This device’s back cover and battery are not to be removed or replaced by a non-qualified professional. • Your phone is an electronic device that generates heat during normal operation. Extremely prolonged, direct skin contact in the absence of adequate ventilation may result in discomfort or minor burns. Therefore, use care when handling your phone during or immediately after operation. • Volume keys - Adjust the volume for ringtones, calls or notifications. - While using the Camera, gently press a Volume key to take a photo. To take continuous photos, press and hold the Volume key. - Press the Volume Down key twice to launch the Camera app when the screen is locked or turned off. Press the Volume Up key twice to launch Capture+. • Power/Lock key - Briefly press the key when you want to turn the screen on or off. - Press and hold the key when you want to select a power control option. Basic Functions 44 • Google Assistant key - You can short-press it once to run Google Assistant. You can press and hold it to run Google Assistant and then release the finger from the key to run the voice command function. - See the Google Assistant for details. • Fingerprint sensor - You can use the fingerprint sensor at the bottom center of the screen to use the fingerprint recognition function. See Fingerprint recognition overview for details. • ToF (Time-of-Flight) sensors - Measures the accurate distance by detecting the infrared emitted from the IR illuminator. • Some functions may be restricted depending on the region and product specifications of different telecommunications providers. • There are NFC chip and wireless charging antennas built into the rear part of the product. Be careful not to damage or cover the NFC chip or wireless charging antennas. • Do not put heavy objects on the device or sit on it. Failure to do so may damage the touch screen. • Screen-protective film or accessories may interfere with the proximity sensor. • If your device is wet or is being used in a humid place, the touch screen or keys may not function properly. Basic Functions 45 There are two microphones built into this product. Be careful not to cover the microphones. While you are talking on the phone, do not cover the microphone with your hand or fingers. Do not use a phone case that is not a genuine product or cover the microphone with accessories, tape, etc. Hold the product correctly as shown in the image when you are using it. Basic Functions 46 Getting to know stereo ear microphone You can connect the stereo ear microphone to the product to use it when you talk on the phone, listen to music, record voice, etc. • Check the left and right earpieces, and insert them into ears until they are securely placed. In order to enjoy high-quality sounds in the optimal conditions, adjust the earphone angle and length properly. • You can press the Answer/Disconnect Phone key to answer or hang up the phone. • You can press the Volume Up/Down key to adjust the sound volume. • The product specifications of the stereo ear microphones may differ by region. • If the stereo ear microphone malfunctions or gets broken during use, bring the product to the nearest LG Service Centre. • If you insert the stereo ear microphone into the product while pressing its keys, it may not operate normally. With the stereo ear microphone inserted into the ears, bring down the status bar on the screen to check if appears. If it does, you can use the keys on the stereo ear microphone. Basic Functions 47 Turning the power on or off Turning the power on When the power is turned off, press and hold the Power/Lock key. • When the device is turned on for the first time, initial configuration takes place. The first booting time for the smart phone may be longer than usual. Turning the power off Press and hold the Power/Lock key, then select Power off. Restarting the device When the device is not working properly or does not respond, restart it by following the instructions below. 1 Press and hold the Power/Lock key and the Volume Down key at the same time until the power is turned off. 2 When the device is restarted, release the key. • This function is not available when the device is connected to LG Dual Screen. Power control options Press and hold the Power/Lock key, then select an option. • Power off: Turn the device off. • Power off and restart: Restart the device. Basic Functions 48 Installing the SIM card Insert the SIM (Subscriber Identity Module) card provided by your service provider to start using your device. • Be careful with the ejection pin since it has a sharp edge. • In order for the water-resistant and dust-resistant features to work effectively, the card tray must be inserted correctly. 1 Insert the pin into the hole of the card tray and press the pin, and then pull the card tray out of the product. 2 Align the Nano-SIM card or memory card on the card tray and press the card in the direction of the arrow as shown in the figure. Basic Functions 49 3 Press the remaining part of the Nano-SIM card or memory card in the direction of the arrow. 4 Insert the card tray into the phone as shown in the figure. Basic Functions 50 • This device supports only Nano SIM cards. Nano Micro Standard • For problem-free performance, it is recommended that you use the device with the correct type of SIM card. Always use a factory-made SIM card supplied by the operator. • Do not lose your SIM card. LG is not responsible for damage and other issues caused by loss or transfer of a SIM card. • Be careful not to damage the SIM card when you insert or remove it. • When you insert the SIM card or memory card, place it on the card tray correctly. • When you insert the card tray back into the device, insert it horizontally in the direction of arrow as shown in the figure. Make sure that the card placed on the card tray does not move out of its position. • Insert the SIM card with the gold-coloured contacts facing downwards. • Be sure to insert the SIM card into the device by following the instructions in the user manual. • If you insert or remove the card tray from the device, be careful not to let water or other liquids enter into the card tray. If a wet card tray or card is inserted into the device, your device may get damaged. • Memory card is an optional item. • Frequent writing and erasing of data may shorten the memory card lifespan. • Some memory cards may not be fully compatible with the device. If you use an incompatible card, it may damage the device or the memory card, or corrupt the data stored in it. Basic Functions 51 Inserting the memory card Insert the memory card into your device. The device can support up to a 2 TB microSD card. Depending on the memory card manufacturer and type, some memory card may not be compatible with your device. 1 Insert the ejection pin into the hole on the card tray. 2 Pull out the card tray. 3 Put the memory card on the card tray with the gold-coloured contacts facing downwards. 4 Insert the card tray back into the slot. • Some memory cards may not be fully compatible with the device. If you use an incompatible card, it may damage the device or the memory card, or corrupt the data stored in it. • Frequent writing and erasing of data may shorten the memory card lifespan. Basic Functions 52 Removing the memory card Unmount the memory card before removing it for safety. 1 On the home screen, tap Settings Storage . 2 Insert the ejection pin into the hole in the card tray and then pull out the card tray from the device. 3 Remove the memory card from the card tray. 4 Insert the card tray back into the slot. • Do not remove the memory card while the device is transferring or accessing information. This may cause data to be lost or corrupted, or may damage the memory card or the device. LG is not responsible for losses that result from the abuse or improper use of memory cards, including the loss of data. Battery Charging the battery Before using the device, fully charge the battery. Charge the device with the USB Type-C cable. Basic Functions 53 • If there is moisture on the charging port, exposed terminals, charging cable, charging adapter, etc., do not use or charge the product. The product may malfunction or get broken or damaged, and there is risk of injury caused by electric shock, fire, overheating, explosion, etc. If you find moisture on such areas, stop using or charging the product immediately and completely remove the moisture. • Do not separate the battery cover. This product uses a non-removable battery. Do not remove or replace the battery cover or the battery. If you remove or replace the battery cover or the battery, the product may be damaged, overheated or explode. • Only use the USB cable and charging adapter provided with the product as basic components. • Your device has an internal rechargeable battery. For your safety, do not remove the embedded battery. • Using the device when it is charging may cause electric shock. To use the device, stop charging it. • Remove the charger from the power socket after the device is fully charged. This prevents unnecessary power consumption. • A charging adapter that supports fast charging is included with the product. The fast charging feature may not work if a fast charging adapter other than the genuine adapter provided with the product is used. • Another way to charge the battery is by connecting a USB cable between the device and a desktop or laptop computer. This may take longer than plugging the adapter to a wall outlet. • Do not charge the battery by using a USB hub that is unable to maintain the rated voltage. Charging may fail or unintentionally stop. • When you are visiting the Service Centre with a battery issue, bring the product and the charger with you Since the battery is a consumable, the battery life may be shortened as times goes by. Basic Functions 54 Precautions when using the device • Make sure to use the USB cable provided; do not use third party USB cables or chargers with your device. The LG limited warranty does not cover the use of third party accessories. • Failure to follow the instructions in this guide and improper use may damage the device. Wireless charging This device supports wireless charging feature. Charge the device with a Qi certified wireless charger (optional, sold separately). Charging the battery with a wireless charger 1 Place your device on the centre of the wireless charger aligned with the wireless charging antenna on the back of the device. • To check the wireless charging antenna area, see Parts overview. 2 When the battery is fully charged, remove the device from the charger. • When you charge the battery with a wireless charger, do not put a magnetic, metallic or conductive materials between the device and the charger. This may disturb charging of the device and the charger may become heated. In this case, the device, charger or SIM/Memory cards may be damaged. Basic Functions 55 • If the battery temperature exceeds a certain level while charging the device, charging may be stopped. • If magnetic, metallic or conductive materials are attached on the back of the device or a protective case is inserted, the device may not charge properly. • If you charge the battery with a wireless charger in areas where the network signal strength is weak, the network performance of your device may be further degraded. • Charge the device with a Qi certified wireless charger (optional, sold separately). Because the LG limited warranty does not cover the use of third party accessories, contact the third party manufacturer. • This product supports wireless charging. Use a Qi certified wireless charger (sold separately) to charge the product. Some coiled wireless chargers may not support wireless charging. Wireless chargers that support EPP (Extended Power Profile) allow high-speed wireless charging. • LG Electronics is not responsible for any issues concerning accessories of other brands. For such issues, contact the manufacturer of the accessory product. Using the battery efficiently Battery lifespan may decrease if you keep many apps and functions running simultaneously and continuously. Cancel background operations to increase battery life. To minimise battery consumption, follow these tips: • Turn off the Bluetooth or Wi-Fi network function when not using them. • Set the screen timeout to as short a time as possible. • Minimise the screen brightness. • Set a screen lock when the device is not used. • Check the battery level while using any downloaded apps. Basic Functions 56 Touch screen You can familiarise yourself with how to control your device by using touch screen gestures. Tapping Lightly tap with your fingertip to select or run an app or option. Touching and holding Touch and hold for several seconds to display a menu with available options. Basic Functions 57 Double-tapping Tap twice quickly to zoom in or out on a web page or map. Dragging Touch and hold an item, such as an app or widget, then move your finger to another location in a controlled motion. You can use this gesture to move an item. Swiping Touch the screen with your finger and move it quickly without pausing. You can use this gesture to scroll through a list, a web page, photos, screens, and more. Basic Functions 58 Pinching and spreading Pinch two fingers to zoom out such as on a photo or map. To zoom in, spread your fingers apart. • Do not expose the touch screen to excessive physical shock. You might damage the touch sensor. • A touch screen failure may occur if you use the device near a magnetic, metallic or conductive material. • If you use the device under bright lights, such as direct sunlight, the screen may not be visible, depending on your position. Use the device in a shady location or a location with an ambient light that is not too bright and bright enough to read books. • Do not press the screen with excessive force. • Gently tap with your fingertip on the option you want. • Touch control may not work properly if you tap while wearing a glove or by using the tip of your fingernail. • Touch control may not work properly if the screen is moist or wet. • The touch screen may not function properly if a screen-protective film or accessory purchased from a third party store is attached to the device. • Displaying a static image for extended periods of time may result in after-images or screen burn-in. Turn off the screen or avoid displaying the same image for a long time when you do not use the device. Basic Functions 59 Home screen Home screen overview The Home screen is the starting point for accessing various functions and apps on your device. Swipe up from the bottom edge of any screen to directly go to the Home screen. You can manage all apps and widgets on the Home screen. Swipe the screen left or right to view all installed apps at a glance. Home screen layout You can view all apps and organise widgets and folders on the Home screen. • The Home screen may differ depending on the manufacturer policy, user settings, software version or service provider. Basic Functions 60 • Status bar: View status icons, the time and the battery level. • Weather widget: View the information of weather and time for a specific area. • Google Search widget: Type or speak to pull open Google Search. • Folder: You can create folders to classify the app based on desired criteria. • Page icon: Display the total number of Home screen canvases. You can tap the desired page icon to go to the page you selected. The icon reflecting the current canvas will be highlighted. • Quick access area: Fix main apps at the bottom of the screen so that they can be accessed from any Home screen canvas. • Navigation bar: You can go to the previous screen or home screen while using the app, and check the list of apps you used recently. Using Navigation bar Here is the gestures guide to control the Navigation bar. • To go to Home screen, swipe up from the bottom edge of the screen. • To go back to the previous screen, swipe in from the left or right edge of the screen. • To go to Overview screen, swipe up and hold from the bottom edge of the screen. • To quickly switch between apps, swipe right at the bottom edge of the screen to go to previously used apps. • Gestures is the default for the Navigation bar. To change it to Buttons only / / , on the home screen, tap Settings Display Navigation bar, then select Buttons only. Basic Functions 61 Status icons When there is a notification for an unread message, calendar event or alarm, the status bar displays the corresponding notification icon. Check your device’s status by viewing notification icons displayed on the status bar. No signal Data is being transmitted over the 5G network Alarm is set Vibrate mode is on Bluetooth is on Connected to a computer via USB Battery level Airplane mode is on Missed calls Wi-Fi is connected Mute mode is on GPS is on Hotspot is on No SIM card The NFC mode is on • Some of these icons may appear differently or may not appear at all, depending on the device's status. Refer to the icons according to the actual environment and area in which you are using the device and your service provider. • Displayed icons may vary, depending on the area or service provider. Basic Functions 62 Notifications panel You can open the notifications panel by dragging the status bar downward on the main screen. • You can drag down the notice window or tap the arrow icon to open the list of quick setting icons. • You can tap to add, delete or arrange icons in the notice window. • If you touch and hold the icon, the settings screen for the corresponding function appears. • You can use the notifications panel even on the lock screen. Drag the notifications panel while the screen is locked to quickly access the desired features. Basic Functions 63 Switching the screen orientation You can set the screen orientation to automatically switch according to the device’s physical orientation. On the notification panel, tap Rotation from the quick access icon list. You can also tap Settings Display and activate Auto-rotate screen on the home screen. Editing the Home screen On the Home screen, touch and hold on an empty space, then select the desired action from below. • To rearrange the Home screen canvases, touch and hold on a canvas, then drag it to another location. • To add a widget to the Home screen, touch and hold on a blank area of the Home screen, then select Widgets. • To change wallpapers, themes, icons, and AOD, touch and hold on a blank area of the Home screen, then select Wallpaper & theme. You can also tap Settings Display Home screen Wallpaper & theme on the home screen, then select wallpapers, themes, icons, and AOD, to apply to the device. Basic Functions 64 • To change the grid, touch and hold on a blank area of the Home screen, then select Grid. Tap the desired grid, then tap Apply. • To configure the Home screen settings, touch and hold on a blank area of the Home screen, then select Home screen settings. See Home screen settings for details. • To view or reinstall the uninstalled apps, touch and hold on a blank area of the Home screen, then select App trash. See App trash for details. • To change the default screen, touch and hold on a blank area of the Home screen, move to desired screen, tap , then tap the screen once more. Basic Functions 65 Viewing the background theme You can view only the background image by hiding the apps and widgets on the Home screen. Spread two fingers apart on the Home screen. • To return to the original screen, which displays apps and widgets, pinch your fingers on the Home screen or drag up from the bottom edge of the screen. Moving apps on the Home screen On the Home screen, touch and hold an app, then drag it to another location. • To keep frequently used apps at the bottom of the Home screen, touch and hold an app, then drag it to the quick access area at the bottom. • To remove an icon from the quick access area, drag the icon to the Home screen. Basic Functions 66 Using folders from the Home screen Creating folders On the Home screen, touch and hold an app, then drag it over another app. • A new folder is created and the apps are added to the folder. Editing folders On the Home screen, tap a folder and do one of the following actions. • To edit the folder name and colour, tap the folder name. • To add apps, touch and hold an app, then drag it over the folder and release it. • To remove an app from the folder, touch and hold the app and drag it to outside the folder. If the removed app is the only one app that existed in the folder, the folder is removed automatically. • You can also add or remove apps after tapping in the folder. • You cannot change the folder colour while using downloaded theme. Basic Functions 67 Home screen settings You can customise the Home screen settings. 1 On the home screen, tap Settings Display Home screen. 2 Customise the following settings: • Select Home: Select a Home screen mode. • Wallpaper: Change the Home screen background wallpaper. • Screen swipe effect: Select an effect to apply when the Home screen canvas switches. • Icon shape: Choose if you want icons to have square or rounded corners. • Google feed: Show to the left of the main Home screen. • Sort apps by: Set how apps are sorted on the Home screen. • Hide apps: Select which apps you want to hide from the Home screen. • Loop Home screen: Enable to allow continuous Home screen scrolling (loop back to first screen after the last screen). • This function is available when Google feed is enabled. • Search: Search by swiping down on the Home screen. • Home screen lock: Enable to prevent apps and widgets from being rearranged or removed. Basic Functions 68 Screen lock Screen lock overview Your device’s screen turns off and locks itself if you press the Power/Lock key. This also happens after the device is left idle for a specified period of time. If you press the Power/Lock key when a screen lock is not set, the Home screen appears immediately. To ensure security and prevent unwanted access to your device, set a screen lock. • A screen lock prevents unnecessary touch input on the device screen and reduces battery consumption. We recommend that you activate the screen lock while not using the device. Setting a screen lock There are several options available for configuring the screen lock settings. 1 On the home screen, tap Settings Lock screen & security Select screen lock and then select the method you prefer. 2 Customise the following settings: • None: Deactivate the screen lock function. • Swipe: Swipe on the screen to unlock the screen. • Pattern: Draw a pattern to unlock the screen. • PIN: Enter a numeric password to unlock the screen. • Password: Enter an alphanumeric password to unlock the screen. • Fingerprints: Unlock the screen by using your fingerprint. Basic Functions 69 Customize Lock screen You can customise lock screen. 1 On the home screen, tap Settings Lock screen & security Customize Lock screen. 2 Select a function you want to set. • Wallpaper: Allow you to set the background for your Lock screen. • Clock: Allow you to set where to position the clock on the Lock screen. • Shortcuts: Allow you to choose apps to run on your Lock screen. This setting appears only when a screen lock is set. • Weather animation: Enable this option to display weather animations for the current location on the Lock screen. • Contact info for lost phone: Allow you to set text to be displayed on the Lock screen to identify the phone’s owner. Secure lock settings You can set secure lock settings. 1 On the home screen, tap Settings Lock screen & security Secure lock settings. 2 Select a function you want to set. • Make pattern visible (shown only when Pattern is set as a screen lock): Turn on to make pattern visible. • Lock timer: Allow you to set the amount of time before the screen automatically locks after the backlight turns off (time-out due to inactivity). • Power key instantly locks: Enable this option to instantly lock the screen when the Power/Lock key is pressed. This setting overrides the Security Lock timer setting. • Show lockdown option (shown only when a screen lock is set): Enable this option to display the Lockdown icon when you press and hold the Power/Lock button. Tap the Lockdown icon to turn off Smart Lock, biometric unlocking, and notifications on the lock screen. Basic Functions 70 • Smart Lock: Allow you to set trusted devices, places, voice, and/or on-body detection that will allow your phone to remain unlocked. • Available menu options may vary depending on the lock screen method selected. KnockON You can turn the screen on or off by double-tapping the screen. • This option is available only on the Home screen provided by LG. It may not function properly on a custom launcher or on the Home screen installed by the user. • When tapping the screen, use your fingertip. Do not use a fingernail. • To use the KnockON feature, make sure that the proximity/light sensor is not blocked by a sticker or any other foreign substance. Turning the screen on Double-tap the middle of the screen. • Tapping the top or bottom of the screen may decrease the recognition rate. Turning the screen off Double-tap on an empty space on the Home screen and Lock screen. You can also double-tap an empty space on the status bar. Disable KnockON If you don’t want to use the KnockON function, set as follows: On the home screen, tap Settings Extensions KnockON and drag it to disable the function. Basic Functions 71 Memory card encryption You can encrypt and protect data saved on the memory card. The encrypted data in the memory card cannot be accessed from another device. 1 On the home screen, tap Settings Lock screen & security Encryption & credentials Encrypt SD card. 2 Read the on-screen overview of memory card encryption and then tap Continue to continue. 3 Select an option and tap Encrypt now. • New data encryption: Encrypt only data that is saved on the memory card after encryption. • Full encryption: Encrypt all the data currently saved on the memory card. • Exclude media files: Encrypt all files, except for media files such as music, photos and videos. • Once memory card encryption starts, some functions are not available. • If the device is turned off while encryption is underway, the encryption process will fail, and some data may be damaged. Therefore, be sure to check if the battery level is sufficient before starting encryption. • Encrypted files are accessible only from the device where the files were encrypted. • The encrypted memory card cannot be used on another LG device. To use the encrypted memory card on another mobile device, format the card. • You can activate memory card encryption even when no memory card is installed into the device. Any memory card that is installed after encryption will automatically be encrypted. Basic Functions 72 Taking screenshots You can take screenshots of the current screen you are viewing. Via a shortcut Press and hold the Power/Lock key and the Volume Down key at the same time for at least two seconds. • Screenshots can be viewed from the Screenshots folder in the Gallery. Via Screenshot On the screen where you want to take a screenshot, drag the status bar downwards, then tap . • When the screen is turned off or locked, you can access Screenshot by pressing the Volume Up key twice. To use this feature, on the home screen, tap Settings Extensions Shortcuts and turn on Open Screen-off memo. • See Writing notes on a screenshot for details. Basic Functions 73 Entering text Using the Smart toolbar You can use various keyboard input methods in one place. You can select the desired input method from the top of the keyboard. 1 Select the desired keyboard input method from the Smart toolbar. 2 Tap and select the input method you want to show on the Smart toolbar, or reorganise them. • You can add up to 6 tools to Smart toolbar. • Some supporting input methods may differ depending on the device you have. • You can turn on or off the Smart toolbar feature from the keyboard settings. • You can also use the keyboard input methods by tapping . • : Add emojis. • : Add avatar stickers. • : Add ani-stickers. • : Open Draw chat. • : Add emojis. • Tap in Smart toolbar. - If the device is connected to LG Dual Screen , you can capture the screen of LG Dual Screen and attach it during keyboard input. For more details, refer to Using Instant Capture on Dual Screen. Basic Functions 74 • Tap in Smart toolbar. - If the device is connected to LG Dual Screen, You can expand the keyboard vertically and use the upper screen as an app screen and the bottom screen as a keyboard screen. For more details, refer to Using Dual Keyboard on Dual Screen. • : Tap to enter text with your voice. - To maximise the voice command recognition, speak clearly. - To enter text with your voice, make sure that your device is connected to a network. - To select the language for voice recognition, tap Languages on the voice recognition screen. - This function may not be supported, or the supported languages may differ depending on the service area. • : Access keyboard settings. • : Open the clip tray. See Clip Tray for details. • : Enter text by handwriting. It is required to download the input language data for handwriting. Tap Download to download the input language data for handwriting. • : Activate floating keyboard when you use the Multi-window feature. You can also move the keyboard to the desired location. Basic Functions 75 Clip Tray If you copy or cut an image or text, it is automatically saved to the clip tray and can be pasted to any space at any time. 1 On the Smart toolbar, select . You can also touch and hold the text input window, then select Clip Tray. 2 Select and paste an item from the clip tray. • A maximum of 20 items can be saved to the clip tray. • Tap to lock saved items in order not to delete them, even when the maximum quantity is exceeded. A maximum of ten items can be locked. To delete locked items, unlock them first. • Tap to delete the items saved to the clip tray. • The clip tray may not be supported by some downloaded apps. • Deleted clipboard items cannot be restored. Using the Smart keyboard You can use the Smart keyboard to enter and edit text. With the Smart keyboard, you can view text as you type without bothering to alternate between the screen and a conventional keyboard. This allows you to easily find and correct errors when typing. Moving the cursor With the Smart keyboard, you can move the cursor to the exact position you want. When typing text, touch and hold on the space bar and then drag left or right. Basic Functions 76 • This option is available only on the QWERTY keyboard. Suggesting words Smart keyboard automatically analyses your usage patterns to suggest frequently used words as you type. The longer you use your device, the more precise the suggestions are. Enter text, then tap a suggested word or gently drag the left or right side of the keyboard upwards. • The selected word is automatically entered. You do not need to manually type every letter of the word. Basic Functions 77 Changing the QWERTY keyboard layout You can add, delete or rearrange keys on the bottom row of the keyboard. 1 On the home screen, tap Settings System Language & keyboard Manage Keyboards LG Keyboard Keyboard height and layout QWERTY Keyboard layout. 2 You can select and organise frequently used symbols. • Some languages may have a different layout. Customising the keyboard height You can customise the keyboard height to maximise hand comfort when typing. 1 On the home screen, tap Settings System Language & keyboard Manage Keyboards LG Keyboard Keyboard height and layout Keyboard height. 2 Adjust the keyboard height. Selecting a landscape keyboard mode You can select a landscape keyboard mode from several choices. 1 On the home screen, tap Settings System Language & keyboard Manage Keyboards LG Keyboard Keyboard height and layout Keyboard type in landscape. 2 Select a keyboard mode. Basic Functions 78 Splitting the keyboard You can split the keyboard in half and place each piece on either side of the screen when the screen is in landscape mode. To split the keyboard, turn the device horizontally and spread it apart on both sides while holding the keyboard with two fingers. To attach the keyboard, close it with pressing with two fingers. • Even if QWERTY keyboard is not in use, it switches to QWERTY keyboard for horizontal screen view. One-handed operation mode You can move the keyboard to one side of the screen so that you can use the keyboard with one hand. 1 On the home screen, tap Settings System Language & keyboard Manage Keyboards LG Keyboard Keyboard height and layout One-handed operation. 2 Press the arrow displayed next to the keyboard to move the keyboard in the direction you want. Basic Functions 79


FREE ENGLISH PDF

OPERATING INSTRUCTIONS

USER GUIDE - USER MANUAL

OWNER GUIDE - OWNER MANUAL

REFERENCE GUIDE - REFERENCE MANUAL

INSTRUCTION GUIDE - INSTRUCTION MANUAL

Leave a Reply