LG 75NANO90 (01) PDF Document

To ensure the safe operation of your LG 75NANO90, please adhere to the following safety instructions:

Electric Shock and Fire Prevention:

• To reduce the risk of electric shock, do not remove the cover or back. There are no user-serviceable parts inside.

• To reduce the risk of fire and electric shock, do not expose this product to rain or moisture.

• To prevent the spread of fire, keep candles or other items with open flames away from this product at all times.

Placement and Environment:

• Do not place the TV and/or remote control in environments such as:

– Away from direct sunlight.

– Areas with high humidity like a bathroom.

– Near heat sources like stoves.

– Near kitchen counters or humidifiers where they can be exposed to steam or oil.

– Areas exposed to rain or wind.

– Near flammable objects like gasoline or candles, or in the path of direct air conditioning.

– Excessively dusty places.

• Do not expose the TV to dripping or splashing and do not place objects filled with liquids, such as vases or cups, on or over it.

Power and Grounding:

• The TV must be connected to a three-prong grounded AC outlet. Ensure the earth ground wire is connected to prevent electric shock.

• Never touch the apparatus or antenna during a lightning storm.

• Ensure the power cord is connected securely. A loose connection can cause damage and, in extreme cases, fire.

• Do not insert metallic or flammable objects into the product.

• Do not touch the end of the power cord while it is plugged in.

Ventilation:

• Install your LG 75NANO90 where there is proper ventilation. Do not install it in a confined space like a bookcase.

• Do not install the product on a carpet or cushion.

• Do not block or cover the product with cloth or other materials while the unit is plugged in.

• Take care not to touch the ventilation openings. When watching the TV for a long period, the ventilation openings may become hot.

Power Cord:

• Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon.

• Pay particular attention to plugs, wall outlets, and the point where the cord exits the device.

• Do not move the TV whilst the Power cord is plugged in.

• Do not use a damaged or loosely fitting power cord.

• Be sure to grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV.

• Do not connect too many devices to the same AC power outlet, as this could result in fire or electric shock.

• The power plug is the disconnecting device. In case of an emergency, the power plug must remain readily accessible.

If any of the following situations occur with your LG 75NANO90, unplug the product immediately and contact your local customer service:

• The product has been damaged.

• If water or another substance enters the product (like an AC adapter, power cord, or TV).

• If you smell smoke or other odors coming from the TV.

• During lightning storms or when the TV is unused for long periods.

Even if the TV is turned off by remote control or button, the AC power source is still connected to the unit if not unplugged.

• Store accessories (battery, etc.) in a safe location out of the reach of children.

• Do not short circuit, disassemble, or allow the batteries to overheat.

• Do not dispose of batteries in a fire.

• Batteries should not be exposed to excessive heat.

• Caution: There is a risk of fire or explosion if the battery is replaced by an incorrect type.

When cleaning your LG 75NANO90, unplug the power cord and wipe gently with a soft, dry cloth. Do not spray water or other liquids directly on the TV. Do not clean your TV with chemicals including glass cleaner, any type of air freshener, insecticide, lubricants, wax (car, industrial), abrasive, thinner, benzene, alcohol, etc., which can damage the product and/or its panel. Doing so may result in electric shock or product damage.

For an optimal connection with your LG 75NANO90, HDMI cables and USB devices should have bezels less than 10 mm thick and 18 mm wide. If a USB cable or memory stick does not fit into your TV’s USB port, use an extension cable that supports USB 2.0.

It is also recommended to use a certified cable with the HDMI logo attached. The recommended HDMI cable type is an Ultra High Speed HDMI cable that is 3 meters or less in length.

The wall mounting bracket specifications for the LG 75NANO90 are as follows:

Make sure to use screws and a wall mount bracket that meet the VESA standard.

Please follow this advice to prevent the LG 75NANO90 from being scratched or damaged and for safe transportation:

• It is recommended to move the TV in the box or packing material that it originally came in.

• Before moving or lifting, disconnect the power cord and all cables.

• When holding the TV, the screen should face away from you to avoid damage.

• Hold the top and bottom of the TV frame firmly. Do not hold the transparent part, speaker, or speaker grill area.

• Avoid touching the screen at all times, as this may result in damage.

• When transporting a large TV like the LG 75NANO90, there should be at least 2 people.

• When transporting the TV, do not expose it to jolts or excessive vibration.

• Keep the TV upright; never turn it on its side or tilt it towards the left or right.

• Do not apply excessive pressure that could cause the frame chassis to flex or bend, as this may damage the screen.

• Be careful not to damage the protruding buttons when handling the TV.

1. Lift and tilt the LG 75NANO90 into its upright position on a table.

2. For proper ventilation, leave a minimum space of 10 cm from the wall.

3. Connect the power cord to a wall outlet.

When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.

To secure your LG 75NANO90 to a wall and prevent it from overturning, follow these steps:

1. Insert and tighten the eye-bolts, or TV brackets and bolts, on the back of the TV. If there are bolts already inserted in the eye-bolt positions, remove them first.

2. Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket with the eye-bolts on the rear of the TV.

3. Connect the eye-bolts and wall brackets tightly with a sturdy rope. Make sure to keep the rope horizontal with the flat surface.

Note:

• Use a platform or cabinet that is strong and large enough to support the TV securely.

• Brackets, bolts, and ropes are not provided. You can obtain additional accessories from your local dealer.

• Attach an optional wall mount bracket at the rear of the TV carefully and install it on a solid wall perpendicular to the floor. If attaching to other building materials, please contact qualified personnel.

• LG recommends that wall mounting be performed by a qualified professional installer.

• It is advised to connect all cables before installing fixed wall mounts.

• Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse.

• When mounting the TV on a wall, make sure not to install it by hanging the power and signal cables on the back of the TV.

• Do not install this product on a wall if it could be exposed to oil or oil mist, as this may damage the product and cause it to fall.

• When installing the wall mounting bracket, it is recommended to cover the stand hole using tape to prevent the influx of dust and insects.

Antenna/Cable:

Connect the TV to a wall antenna socket with an RF cable (75 Ω).

• Use a signal splitter to use more than 2 TVs.

• If the image quality is poor, install a signal amplifier properly to improve the image quality.

• If the image quality is poor with an antenna connected, try to realign the antenna in the correct direction.

Satellite Dish:

Connect the TV to a satellite dish to a satellite socket with a satellite RF cable (75 Ω).

To enable this feature on your LG 75NANO90, navigate to the settings menu: → → [Picture] → [Additional Settings] → [HDMI Ultra HD Deep Colour].

The available options are:

• On: Supports 4K @ 50/60 Hz (4:4:4, 4:2:2, 4:2:0). For ports 3 & 4 only, it also supports 4K @ 100/120 Hz (4:4:4, 4:2:2, 4:2:0).

• Off: Supports 4K @ 50/60 Hz (4:2:0).

If the device connected to the input port also supports Ultra HD Deep Colour, your picture may be clearer. However, if the device doesn’t support it, it may not work properly. In that case, change the setting to Off.

You can operate the TV functions using the single button on the TV. When the TV is on, press the button once to access the menu. You can then adjust the menu items using the button.

Basic Functions:

• Power On: Press

• Power Off: Press and Hold

• Menu Control: Press

• Menu Selection: Press and Hold

Adjusting the Menu:

The descriptions are based on the buttons on the remote control. To use a button with a “**” notation, press and hold for more than 1 second.

• POWER: Turns the TV on or off.

• STB POWER: Turns your set-top box on or off.

• Number buttons: Enters numbers.

• 9**: Accesses [Quick Help].

• – (DASH): Inserts a dash between numbers.

• LIST: Accesses the saved programmes list.

• … (MORE ACTIONS): Displays more remote control functions.

• QUICK ACCESS**: Edits QUICK ACCESS, allowing you to enter a specified app or Live TV by pressing and holding a number button.

• AD/SAP**: Enables the audio descriptions function.

• + / –: Adjusts the volume level.

• MUTE: Mutes all sounds.

• MUTE**: Accesses the [Accessibility] menu.

• ^ / v: Scrolls through the saved programmes.

• Voice recognition: Press to check for recommended content. Speak while pressing and holding the button to use the voice recognition feature.

• HOME: Accesses the Home menu.

• HOME**: Shows the previous history.

• Q. Settings: Accesses the Quick Settings.

• Q. Settings**: Displays the [All Settings] menu.

• Wheel (OK): Press the center of the button to select a menu. You can change programmes using this button.

• Up/Down/Left/Right: Press these buttons to scroll the menu.

• BACK: Returns to the previous level.

• BACK**: Clears on-screen displays and returns to the last input viewing.

• GUIDE: Shows the programme guide.

• Streaming Service buttons: Connects to the Video Streaming Service.

• RECENTS: Shows the previous history.

• INPUT: Changes the input source.

• INPUT**: Accesses the [Home Dashboard].

• STB MENU: Displays the set-top box Home menu.

• Coloured Buttons: These access special functions in some menus.

• Record Button: Runs the record function.

• Control buttons (Play, Pause): Controls media contents.

How to register the Magic Remote Control:

To use the Magic Remote, you must first pair it with your TV.

1. Put batteries into the Magic Remote and turn the TV on.

2. Point the Magic Remote at your TV and press the Wheel (OK) button on the remote control.

If the TV fails to register the Magic Remote, try again after turning the TV off and back on.

How to deregister the Magic Remote Control:

Press the (BACK) and (HOME) buttons at the same time for five seconds to unpair the Magic Remote with your TV.

Alternatively, press and hold the GUIDE button for more than 5 seconds to disconnect and re-register the Magic Remote at the same time.

If you cannot control the TV with the remote control, try the following steps:

• Check the remote control sensor on the product and try again.

• Check if there is any obstacle between the product and the remote control.

• Check if the batteries are still working and are properly installed (positive to positive, negative to negative).

If there is no image display and no sound is produced, check the following:

• Check if the product is turned on.

• Check if the power cord is connected to a wall outlet.

• Check if there is a problem in the wall outlet by connecting other products to it.

If the TV turns off suddenly, consider the following possibilities:

• Check the power control settings. The power supply may have been interrupted.

• Check if the auto-off function is activated on the settings related time.

• If there is no signal while the TV is on, it will turn off automatically after 15 minutes of inactivity.

• “Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required.

• Electrical circuit humming/panel buzzing: A low-level noise is generated from a high-speed switching circuit, which supplies a large amount of current to operate the product. It varies depending on the product. This generated sound does not affect the performance and reliability of the product.

The specifications for the wireless module (LGSBWAC92) in your LG 75NANO90 are as follows:

Wireless LAN (IEEE 802.11a/b/g/n/ac)

Bluetooth

For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm between the device and the body.