LG 55NANO91 (01) PDF Document

To reduce the risk of fire and electric shock, do not expose your LG 55NANO91 TV to rain or moisture. To prevent the spread of fire, keep candles or other items with open flames away from this product at all times.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.

Do not place the LG 55NANO91 TV and/or remote control in the following environments:

Keep the product away from direct sunlight.

An area with high humidity such as a bathroom.

Near any heat source such as stoves and other devices that produce heat.

Near kitchen counters or humidifiers where they can easily be exposed to steam or oil.

An area exposed to rain or wind.

Do not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g., on shelves above the unit).

Near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning.

Do not install in excessively dusty places.

Otherwise, this may result in fire, electric shock, combustion/explosion, malfunction or product deformation.

Install your LG 55NANO91 TV where there is proper ventilation. Do not install in a confined space such as a bookcase.

Do not install the product on a carpet or cushion.

Do not block or cover the product with cloth or other materials while the unit is plugged in.

Take care not to touch the ventilation openings. When watching the TV for a long period, the ventilation openings may become hot.

Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the device.

Do not move the TV whilst the Power cord is plugged in.

Do not use a damaged or loosely fitting power cord.

Be sure to grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV.

Do not connect too many devices to the same AC power outlet as this could result in fire or electric shock.

The power plug is the disconnecting device. In case of an emergency, the power plug must remain readily accessible.

Do not let your children climb or cling onto the TV. Otherwise, the TV may fall over, which may cause serious injury. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

Using cabinets or stands recommended by the manufacturer of the television.

Only using furniture that can safely support the television.

Ensuring the television is not overhanging the edge of the supporting furniture.

Not placing the television on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television to a suitable support.

Not standing the televisions on cloth or other materials placed between the television and supporting furniture.

Educating children about the dangers of climbing on furniture to reach the television or its controls.

Never touch the apparatus or antenna during a lightning storm, as you may be electrocuted. It is also recommended to unplug the product when unused for long periods of time.

If any of the following occur, unplug the product immediately and contact your local customer service:

The product has been damaged.

If water or another substance enters the product (like an AC adapter, power cord, or TV).

If you smell smoke or other odors coming from the TV.

When lightning storms or when unused for long periods of time.

Store the accessories (battery, etc.) in a safe location out of the reach of children.

Do not short circuit, disassemble, or allow the batteries to overheat.

Do not dispose of batteries in a fire. Batteries should not be exposed to excessive heat.

Caution: Risk of fire or explosion if the battery is replaced by an incorrect type.

Do not mix new batteries with old batteries. This may cause the batteries to overheat and leak.

Failure to match the correct polarities of the battery may cause the battery to burst or leak, resulting in fire, personal injury, or ambient pollution.

When moving, make sure the product is turned off, unplugged, and all cables have been removed. It may take 2 or more people to carry larger TVs. Do not press or put stress on the front panel of the TV. Otherwise, this may result in product damage, fire hazard or injury.

Keep the packing anti-moisture material or vinyl packing out of the reach of children.

Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation:

It is recommended to move the TV in the box or packing material that the TV originally came in.

Before moving or lifting the TV, disconnect the power cord and all cables.

When holding the TV, the screen should face away from you to avoid damage.

Hold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grill area.

When transporting a large TV, there should be at least 2 people.

When transporting the TV by hand, hold the TV as shown in the illustration in the manual.

When transporting the TV, do not expose the TV to jolts or excessive vibration.

When transporting the TV, keep the TV upright, never turn the TV on its side or tilt towards the left or right.

Do not apply excessive pressure to cause flexing / bending of frame chassis as it may damage screen.

When handling the TV, be careful not to damage the protruding buttons.

Avoid touching the screen at all times, as this may result in damage to the screen.

When cleaning, unplug the power cord and wipe gently with a soft/dry cloth. Do not spray water or other liquids directly on the TV. Do not clean your TV with chemicals including glass cleaner, any type of air freshener, insecticide, lubricants, wax (car, industrial), abrasive, thinner, benzene, alcohol etc., which can damage the product and/or its panel. Otherwise, this may result in electric shock or product damage.

When cleaning the product, be careful not to allow any liquid or foreign objects to enter the gap between the upper, left or right side of the panel and the guide panel.

Make sure to wring any excess water or cleaner from the cloth.

Do not spray water or cleaner directly onto the TV screen.

Make sure to spray just enough of water or cleaner onto a dry cloth to wipe the screen.

If the TV is turned on for the first time after it was shipped from the factory, initialization of the TV may take a few minutes.

The image shown may differ from your TV.

Your TV’s OSD (On Screen Display) may differ slightly from that shown in the manual.

Available menus and options may differ from the input source or product model you are using.

New features may be added to this TV in the future.

The device must be easily accessed to a location outlet near the access. Some devices are not made by turning on/off button, turning off the device and unplugging the power cord.

For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit into your TV’s USB port.

Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not display or a connection error may occur.

Recommended HDMI Cable Type: Ultra High Speed HDMI®/™ cable (3 m or less).

To wall mount your LG 55NANO91 TV, make sure to use screws and a wall mount bracket that meet the VESA standard. The specifications are as follows:

1. Lift and tilt the TV into its upright position on a table. When attaching the stand, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.

2. Leave a 10 cm (minimum) space from the wall for proper ventilation.

3. Connect the power cord to a wall outlet.

1. Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV. If there are bolts inserted at the eye-bolts position, remove the bolts first.

2. Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eye-bolts on the rear of the TV.

3. Connect the eye-bolts and wall brackets tightly with a sturdy rope. Make sure to keep the rope horizontal with the flat surface.

Note:

Use a platform or cabinet that is strong and large enough to support the TV securely.

Brackets, bolts and ropes are not provided. You can obtain additional accessories from your local dealer.

Attach an optional wall mount bracket at the rear of the TV carefully and install it on a solid wall perpendicular to the floor. LG recommends that wall mounting be performed by a qualified professional installer.

Use a wall mount bracket where the device is adequately secured to the wall with enough space to allow connectivity to external devices. It is advised to connect all the cables before installing fixed wall mounts.

Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse.

If you intend to mount the product to a wall, attach VESA standard mounting interface (optional parts) to the back of the product. When you install the set to use the wall mounting bracket, fix it carefully so as not to drop.

When mounting a TV on the wall, make sure not to install the TV by hanging the power and signal cables on the back of the TV.

Do not install this product on a wall if it could be exposed to oil or oil mist. This may damage the product and cause it to fall.

When installing the wall mounting bracket, it is recommended to cover the stand hole using tape, in order to prevent the influx of dust and insects.

Do not use a sharp object when you detached the cable cover. This could damage the cable or the cabinet. It may also cause personal harm.

Connect the TV to a wall antenna socket with an RF cable (75 Ω).

Use a signal splitter to use more than 2 TVs.

If the image quality is poor, install a signal amplifier properly to improve the image quality.

If the image quality is poor with an antenna connected, try to realign the antenna in the correct direction.

An antenna cable and converter are not supplied.

For a location that is not supported with ULTRA HD broadcasting, this TV cannot receive ULTRA HD broadcasts directly.

When connecting via HDMI, the product and external devices should be turned off and unplugged. Supported HDMI Audio formats are:

True HD (48 kHz)

Dolby Digital / Dolby Digital Plus (32 kHz / 44.1 kHz / 48 kHz)

PCM (32 kHz / 44.1 kHz / 48 kHz / 96 kHz / 192 kHz)

To enable higher quality picture, go to [Picture] → [Additional Settings] → [HDMI Ultra HD Deep Colour].

On: Support 4K @ 50/60 Hz (4:4:4, 4:2:2, 4:2:0), <3,4 port Only> 4K @ 100/120 Hz (4:4:4, 4:2:2, 4:2:0)

Off: Support 4K @ 50/60 Hz (4:2:0)

If the device connected to the Input Port also supports Ultra HD Deep Colour, your picture may be clearer. However, if the device doesn’t support it, it may not work properly. In that case, change the TV’s [HDMI Ultra HD Deep Colour] setting to off.

Some USB Hubs may not work. If a USB device connected using a USB Hub is not detected, connect it to the USB port on the TV directly.

Available external devices include: Blu-ray player, HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. The connection may differ from the model. You can connect external devices regardless of the TV port order.

Refer to the external equipment’s manual for operating instructions.

If connecting a gaming device, use the cable supplied with it.

In PC mode, there may be noise associated with resolution, vertical pattern, contrast, or brightness. If present, change the PC output to another resolution, refresh rate, or adjust brightness and contrast in the [Picture] menu until clear.

If ULTRA HD content is played on your PC, video or audio may become disrupted intermittently depending on your PC’s performance.

When connecting via a wired LAN, it is recommended to use a CAT 7 cable (Only when LAN port is provided).

You can operate the TV functions using the single button on the TV.

Basic functions:

Power On: Press the button.

Power Off: Press and hold the button.

Menu Control: Press the button when the TV is on.

Menu Selection: Press and hold the button to select a menu item.

Adjusting the menu:

When the TV is on, press the button once to access the menu. You can then adjust the items using the button:

The descriptions are based on the buttons on the remote control. To use the button functions marked with “**”, press and hold for more than 1 second.

(POWER): Turns the TV on or off.

(STB POWER): Turns your set-top box on or off.

Number buttons: Enters numbers.

9**: Accesses the [Quick Help].

-(DASH): Inserts a – between numbers like 2-1 and 2-2.

LIST: Accesses the saved programmes list.

… (MORE ACTIONS): Displays more remote control functions.

QUICK ACCESS**: Edits QUICK ACCESS, a feature to enter a specified app or Live TV directly.

AD/SAP**: Enables audio descriptions function.

+ / – : Adjusts the volume level.

(MUTE): Mutes all sounds.

(MUTE)**: Accesses the [Accessibility] menu.

^ / v: Scrolls through the saved programmes.

(Voice recognition): Requires a network connection. Check for recommended content.

(Voice recognition)**: Speak while pressing and holding the button to use the voice recognition feature.

(HOME): Accesses the Home menu.

(HOME)**: Shows the previous history.

(Q. Settings): Accesses the Quick Settings.

(Q. Settings)**: Displays the [All Settings] menu.

Wheel (OK): Press the center of the button to select a menu. You can change programmes by using the button.

(up/down/left/right): Press to scroll the menu. If the pointer is in use, pressing these buttons will make the pointer disappear and the remote will operate like a general remote. Shake the remote to display the pointer again.

(BACK): Returns to the previous level.

(BACK)**: Clears on-screen displays and returns to the last input viewing.

GUIDE: Shows programme guide.

Streaming Service buttons: Connects to the Video Streaming Service.

RECENTS: Shows the previous history.

(INPUT): Changes the input source.

(INPUT)**: Accesses the [Home Dashboard].

STB MENU: Displays the set-top box Home menu.

Red, Green, Yellow, Blue Buttons: These access special functions in some menus.

REC: Runs the record function.

(Control buttons): Controls media contents.

(Some buttons and services may not be provided depending on models or regions.)

How to register the Magic Remote Control:

To use the Magic Remote, you must first pair it with your TV.

1. Put batteries into the Magic Remote and turn the TV on.

2. Point the Magic Remote at your TV and press the Wheel (OK) button on the remote control.

If the TV fails to register the Magic Remote, try again after turning the TV off and back on.

How to deregister the Magic Remote Control:

Press the (BACK) and (HOME) buttons at the same time for five seconds to unpair the Magic Remote with your TV.

Alternatively, press and hold the GUIDE button for more than 5 seconds to disconnect and re-register the Magic Remote at the same time.

If you cannot control the TV with the remote control, try the following:

Check the remote control sensor on the product and try again.

Check if there is any obstacle between the product and the remote control.

Check if the batteries are still working and properly installed (⊕ to ⊕, ⊖ to ⊖).

If there is no image display and no sound is produced, check the following:

Check if the product is turned on.

Check if the power cord is connected to a wall outlet.

Check if there is a problem in the wall outlet by connecting other products.

If the TV turns off suddenly, consider these possibilities:

Check the power control settings. The power supply may be interrupted.

Check if the auto-off function is activated on the settings related time.

If there is no signal while the TV is on, the TV will turn off automatically after 15 minutes of inactivity.

If no signal is detected when connecting a PC via HDMI, follow these steps:

Turn the TV off/on using the remote control.

Reconnect the HDMI cable.

Restart the PC with the TV on.

These are common characteristics and not necessarily malfunctions:

Flicker: If the product feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal; there is nothing wrong with the product.

Tiny dots: This panel is an advanced product containing millions of pixels. You may see tiny black dots and/or brightly colored dots (red, blue, or green) at a size of 1 ppm on the panel. This does not indicate a malfunction and does not affect the performance and reliability of the product. This phenomenon also occurs in third-party products and is not subject to exchange or refund.

Brightness/Color Variation: You may find different brightness and color of the panel depending on your viewing position (left/right/top/down). This phenomenon occurs due to the characteristic of the panel. It is not related to product performance and is not a malfunction.

Image Sticking: Displaying a still image for a prolonged period may cause image sticking. Avoid displaying a fixed image on the TV screen for a long period of time.

These sounds are generally normal and not indicative of a product failure:

“Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required.

Electrical circuit humming/panel buzzing: A low-level noise is generated from a high-speed switching circuit, which supplies a large amount of current to operate the product. It varies depending on the product. This generated sound does not affect the performance and reliability of the product.

Broadcasting Specifications (Depending on country)

Wireless module (LGSBWAC92) Specifications

Environment condition