Free English LANCOM R&S UF-300 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.


CLICK HERE TO DOWNLOAD LANCOM R&S UF-300 (01) PDF DOCUMENT

If this is not the document you want for this product, click here to see if we have any other documents for this product.

How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.

How do I connect the TP Ethernet interfaces on the LANCOM R&S UF-300?

To connect the interfaces, connect the eth0 – eth7 TP Ethernet interfaces with the enclosed Ethernet cable to your configuration PC or other networking components.


What is the function of the configuration interface RJ45 (Console) on the LANCOM R&S UF-300?

The configuration interface RJ45 (Console) serves as a maintenance interface for expert configuration.


What are the USB 2.0 interfaces used for on the LANCOM R&S UF-300?

The USB 2.0 interfaces are utilized for software re-installation.


How do I power on the LANCOM R&S UF-300?

To power on the device, follow these steps:

1. Connect the power cable to the power connector on the rear side of the device.

2. Set the power switch on the device’s rear side to the “I” position.

3. Turn on the device by shortly pressing the Reset button on the front with a pointed device, such as a paper clip.


How do I shut down the LANCOM R&S UF-300 using the reset button?

Pressing the reset button on the front of the device for 5 seconds will shut down the device.


What do the TP Ethernet LED indicators signify on the LANCOM R&S UF-300?

The eth0 – eth7 TP Ethernet LEDs indicate the status of the network connection and data transfer speeds as detailed below:

LED Status Description
Both off No networking device attached
Left green flickering; Right orange, permanently Data transfer 1000 Mbps
Left green, flickering; Right green, permanently Data transfer 100 Mbps
Left green, flickering; Right off Data transfer 10 Mbps

What do the Power and HDD LEDs indicate on the LANCOM R&S UF-300?

The Power and HDD LEDs provide information regarding the operational status and storage access of the device:

LED Status Description
Power Off Device switched off
Power Green Device operational
HDD Off No HDD read-/write access
HDD Red flickering HDD read-/write access

What are the hardware specifications for the LANCOM R&S UF-300?

Hardware Feature Specification
Power supply Internal power supply unit (100–240 V, 50–60 Hz)
Power consumption Max. 150 W
Environment Temperature range 0–40 °C; humidity 20–90 %; non-condensing
Housing Robust metal housing, 1 HU with mounting brackets for 19“ installation, network connectors on the front
Fans 2
Dimensions (mm) 438 x 44 x 292 (W x H x D)

What interfaces are available on the LANCOM R&S UF-300?

Interface Type Details
ETH 8x 10 / 100 / 1000 Mbps Gigabit Ethernet ports
USB 2x USB 2.0 ports
Console RJ45 configuration interface

What is included in the package content for the LANCOM R&S UF-300?

The package content includes:

Quick Reference Guide (DE, EN), Quick Install Guide (DE, EN), Service & Support Guide (DE, EN)

1 Ethernet cable

1 IEC power cord

1 serial configuration cable

2 19” brackets for rack mounting


What safety and setup observations should be followed for the LANCOM R&S UF-300?

Please observe the following when setting up the device:

The mains plug of the device must be freely accessible.

Do not rest any objects on top of the device and do not stack multiple devices.

Keep the device’s ventilation slots clear of obstruction.

Before initial startup, make sure to take notice of the information regarding the intended use.

Operate the device only with a professionally installed power supply at a nearby power socket that is freely accessible at all times.

NO IMAGE CONTENT AT THIS TIME. PLEASE CHECK BACK LATER

CLICK HERE TO DOWNLOAD LANCOM R&S UF-300 (01) PDF DOCUMENT


Leave comments, questions, reviews, tips, tricks, hacks or page errors below. Account not required.