Post questions, comments, reviews or page errors in the comment box below.
PDF Content Summary:
****** Page 1 ****** AUTO CURRENT D.C- CURRENT SENSOR INSTALLATION INSTRUCTIONS z Fuse 4 Chassis Ground Compartment Lights Loads Chassis Ground Indicator Lamp MODEL NUMBER 091-22F-2 091-22F-3 091-22F-5 091-22+6 Door Switch Chassis Ground Door Switch Chassis Ground 1 The Auto Current F detects current and closes a switch when the sensed current flows to provide a remote indication. An electronic flasher interrupts the indicator output approximately once per second to provide a flashing indication. Designed for applications where a remote indicator must be illuminated when one or more lights or other loads are energized. By detecting load current any one , or more than one lamp, or other load will cause the indicatorto light. The indicator circuit contains a relay which is operated by the sensor and flashing circuit. Indicator currents as high as 5 amperes may be driven by the relay. 5 Loads FLASHER 12V 1 IND CO SCHEMATIC ORDERING INFORMATION RESIST OHMS .01 .01 .02 MIN. OPER MAX.OPER. SWITCH AMPS 1.0 .50 .25 .12 AMPS RATING 12V 30 30 10 3 5 AMP 5 AMP 5 AMP 5 AMP KUSSMAUL ELECTRONICS CO., INC. 170 CHERRY AVE-, WEST SAYVILLE, N.Y- 1 1796 TEL: in NY 631-567-0314 TOLL FREE: 800-346-0857 FAX: 631-567-5826 1M 091-22-F-X; RevB, 01-30-08
FREE ENGLISH PDF
USER GUIDE – USER MANUAL
OWNER GUIDE – OWNER MANUAL
REFERENCE GUIDE – REFERENCE MANUAL
INSTRUCTION GUIDE – INSTRUCTION MANUAL