KEF CI160CS (01) PDF MANUAL

KEF CI160CS (01) PDF SUMMARY:

Q: What kind of professional should install the speakers?

The installation should be performed by an installer who is trained in the correct use of electrical and hand tools, who has knowledge of local building and fire regulations, and who is aware of what is behind the wall or ceiling in which the loudspeaker is being installed. Do not attempt to install the loudspeakers unless you are sure that you will not cut through electrical cables or water or gas pipes or support beams. Make sure that the wall or ceiling can carry the weight of the units you want to install.

Q: What should you check before attempting to install the speakers?

You should be sure that you will not cut through electrical cables or water or gas pipes or support beams. You also need to check that the wall or ceiling can carry the weight of the units you want to install.

Q: What are these KEF speakers designed for?

These KEF Ci series custom installation loudspeakers are designed for dry-lined, stud partition walls and ceilings, and for suspended ceilings.

Q: What is the purpose of the installation manual?

The installation manual is an introduction to the KEF Ci series custom installation loudspeakers.

Q: What is included in the installation section of the PDF?

The installation section of the PDF includes a diagram and text showing the badge position and how to align the left corner of the grille for the following models: Ci160QL, Ci160QS, Ci160CL, Ci160CS, and Ci160CSds.

Q: What are the specifications for the Ci160QL model?

• Nominal impedance: 8Ω
• Sensitivity (2.83V/1m): 89dB
• Frequency response (±6dB): 38Hz – 34kHz open-backed
• Crossover frequency: 3.0kHz
• Drive units: 160mm (6.5in.) LF, 19mm (0.75in.) Uni-Q HF * Recommended amplifier power: 10-125W
• Product external dimensions: 303 x 223 x 97.5 mm (HxWxD)
• Cut-out dimensions: 274 x 194 mm (HxW)
• Net Weight: 2.05kg (4.51 lbs.)
• Mounting depth from surface: 91 mm (3.58in.)
• Optional rough in frame: RIF160L * Optional near enclosure: RNC160L

Q: What are the specifications for the Ci160CL model?

• Nominal impedance: 8Ω
• Sensitivity (2.83V/1m): 89dB
• Frequency response (±6dB): 52Hz – 20kHz
• Crossover frequency: 3.4kHz
• Drive units: 160mm (6.5in.) LF, 19mm (0.75in.) HF
• Recommended amplifier power: 10-100W
• Product external dimensions: 303 x 223 x 91 mm (HxWxD)
• Cut-out dimensions: 274 x 194 mm (HxW)
• Net Weight: 1.87kg (4.12 lbs.)
• Mounting depth from surface: 84.5mm (3.33in.) * Optional rough in frame: RIF160L
• Optional near enclosure: RNC160L

Q: What are the specifications for the Ci160QS model?

• Nominal impedance: 8Ω
• Sensitivity (2.83V/1m): 89dB
• Frequency response (±6dB): 38Hz – 34kHz
• Crossover frequency: 3.0kHz
• Drive units: 160mm (6.5in.) LF, 19mm (0.75in.) Uni-Q HF
• Recommended amplifier power: 10-125W
• Product external dimensions: 223 x 223 x 97 mm (HxWxD)
• Cut-out dimensions: 194 x 194 mm (HxW)
• Net Weight: 1.88kg (4.14 lbs.)
• Mounting depth from surface: 91 mm (3.58in.)
• Optional rough in frame: RIF160S
• Optional near enclosure: RNC160S

Q: What are the specifications for the Ci160CS model?

• Nominal impedance: 8Ω
• Sensitivity (2.83V/1m): 89dB
• Frequency response (±6dB): 52Hz – 20kHz
• Crossover frequency: 3.4kHz
• Drive units: 160mm (6.5in.) LF, 19mm (0.75in.) HF
• Recommended amplifier power: 10-100W
• Product external dimensions: 223 x 223 x 90.5 mm (HxWxD) * Cut-out dimensions: 194 x 194 mm (HxW)
• Net Weight: 1.70kg (3.74 lbs.)
• Mounting depth from surface: 84.5mm (3.33in.)
• Optional rough in frame: RIF160S * Optional near enclosure: RNC160S