JBL GRAND TOURING GTO8608C (01) PDF MANUAL

FREE ENGLISH JBL GRAND TOURING GTO8608C (01) PDF USER GUIDE

FREE ENGLISH JBL GRAND TOURING GTO8608C (01) PDF USER MANUAL

FREE ENGLISH JBL GRAND TOURING GTO8608C (01) PDF OWNER GUIDE

FREE ENGLISH JBL GRAND TOURING GTO8608C (01) PDF OWNER MANUAL

FREE ENGLISH JBL GRAND TOURING GTO8608C (01) PDF REFERENCE GUIDE

FREE ENGLISH JBL GRAND TOURING GTO8608C (01) PDF INSTRUCTION GUIDE

FREE ENGLISH JBL GRAND TOURING GTO8608C (01) PDF REFERENCE MANUAL

FREE ENGLISH JBL GRAND TOURING GTO8608C (01) PDF INSTRUCTION MANUAL

FREE ENGLISH JBL GRAND TOURING GTO8608C (01) PDF OPERATING INSTRUCTIONS

CLICK HERE TO DOWNLOAD JBL GRAND TOURING GTO8608C (01) PDF MANUAL

If this is not the document you want for this product, click here to see if we have any other documents for this product.

How can I adjust the tweeter level or high cut filter?

The crossover features a switch that allows you to set the High Cut to either 0dB (position 1) or -6dB (position 2).

What types of components are typically included with the GTO component speaker systems?

The GTO component systems (GTO508C, GTO608C, GTO6508C, GTO8608C) typically include:

– Woofers

– Separate tweeters (GTO18T)

– Passive crossover networks

– Speaker grilles

– Various mounting hardware (screws, clips)

– Wiring harnesses

The GTO6583C system includes a 3-1/2″ (87mm) midrange/tweeter assembly instead of a separate tweeter, along with woofers, crossovers, grilles, and hardware.

Specific quantities of hardware vary by model.

How should the component speakers be wired to the crossover?

Connect the amplifier or head unit output to the ‘IN’ terminals on the crossover. Connect the woofer to the ‘WF’ terminals on the crossover. Connect the tweeter to the ‘TW’ terminals on the crossover. Ensure correct polarity (+ to +, – to -) for all connections.

What are the mounting options for the GTO18T tweeter?

The GTO18T tweeter, included with GTO508C, GTO608C, GTO6508C, and GTO8608C systems, can be flush-mounted or surface-mounted using the provided hardware.

How is the GTO6583C 3-1/2″ (87mm) speaker mounted?

The GTO6583C 3-1/2″ (87mm) midrange/tweeter speaker assembly is designed to be mounted in a suitable opening, such as a dashboard or panel location, using the supplied hardware.

How are the GTO woofers (GTO508C, GTO608C, GTO6508C, GTO8608C) typically mounted?

The woofers are typically installed in door panels or other suitable vehicle locations using the appropriate mounting hardware. Adapters may be necessary depending on the vehicle. Speaker grilles are provided for protection and aesthetic integration.

How should I clean the speaker grilles?

The speaker grilles may be cleaned with a damp cloth. Do not use any cleaners or solvents on the grilles or the speaker cones.

What is required for warranty coverage?

A valid serial number is required for warranty coverage. Please register your product online to help determine the length of your warranty.

What are the technical specifications for the JBL GTO series component speakers?

SPECIFICATIONS	GTO508C	GTO608C	GTO6508C	GTO8608C	GTO6583C	GTO18T
Type	5-1/4″ 2-Way Component System	6-1/2″ 2-Way Component System	6-1/2″ 2-Way Component System	5″ x 7″/6″ x 8″ 2-Way Component System	6-1/2″ 3-Way Component System	1″ Component Tweeter
Nominal Impedance	2 ohms	2 ohms	2 ohms	2 ohms	2 ohms	–
Power Handling, RMS	55W	70W	70W	70W	70W	45 W
Power Handling, Peak	165W	210W	210W	210W	210 W	135 W
Sensitivity (@ 2.83V, 1m)	91dB	92dB	92dB	92dB	92 dB	92 dB
Frequency Response	65Hz – 21kHz	50Hz – 21kHz	50Hz – 21kHz	50Hz – 21kHz	50 Hz – 21 kHz	2.5kHz – 21kHz
Crossover Point	–	–	–	–	3.5 kHz	–
Mounting Depth – Woofer	2-1/4″ (57mm)	2-1/16″ (52mm)	2-1/16″ (52mm)	2-5/16″ (59mm)	2-1/16″ (52mm)	–
Mounting Depth – Mid/Tweeter	–	–	–	–	2-1/16″ (52mm)	–
Mounting Depth – Tweeter	13/16″ (20mm)	13/16″ (20mm)	13/16″ (20mm)	13/16″ (20mm)	–	13/16″ (20mm)