Click here to download EIZO FP-506 (01) PDF MANUAL

PDF Content Summary:

****** Page 1 ****** User’s Manual FP-506 Panel Protector for EIZO 43 cm (17.0 inch) class LCD Monitors Note • Please be careful not to scratch the LCD panel or the cabinet with the panel protector during installation. Also please do not remove the panel protector often. It may scratch or result in damage to the LCD panel. • The panel protector has an anti-glare treatment side and a glossy side. Use preferable side. • When using LCD monitor with optional panel protector, it is preferable to avoid using downwards. In this condition, the panel protector might become bend or slip out from the monitor. Installation Before installation, please remove dust and stains from the LCD panel. 1. Set the panel protector into the grooves of the panel frame; the lower first (1), then the upper (2). 2. With the enclosed tool (Lever) set the tabs of the panel protector into the side grooves (4 tabs). Put the lever on the tabs of the panel protector and move it toward the LCD panel to install. Position the protector into the LCD panel tightly without leaving an opening. For the recommendation, please use the stoppers to prevent the panel protector from bending or slipping out from the monitor. Before installation the stoppers, please remove dust and stains from the cabinet of the monitor. Follow these steps to install the stoppers. 1. Remove the protection paper from the stoppers. 2. Install the stoppers on the cabinet of the monitor. Removing Stopper i. .31 Release the stoppers from the cabinet. Put the lever on the tabs of panel protector and move it toward the cabinet to remove. Cleaning Note • Please be sure to keep the panel protector immobilized while cleaning it. Otherwise it may scratch the surface of the LCD panel. To hold the panel protector by hand, use a soft cloth to avoid dust or finger prints. • Chemicals such as alcohol and antiseptic solution may cause gloss variation, tarnishing, and fading of the cabinet or panel, and also quality deterioration of the image. • Never use any solvents or chemicals, such as thinner, benzene, wax, and abrasive cleaner, which may damage the cabinet or panel. If necessary, the stains on the cabinet and panel surface can be removed by moistening part of a soft cloth with water. Tips • The optional ScreenCleaner is recommended for cleaning the cabinet and panel surface. Specification Surface treatment Coating strength Reflectivity Dimension/ Weight Accessories Anti-glare side: anti-glare hard coating / Glossy side: hard coating Less than 6.8 % Light transmission More than 90 % 341.2 mm W x 273.5 mm (H x 0.8 mm (D / approx. 95 g Lever (for Panel Protector) x 1, Stoppers x 4, User’s Manual

****** Page 2 ****** EIZO Corporation 153 Shimokashiwano, Hakusan, Ishikawa 924-8566 Japan Phone: +81 76 277 6792 Fax: +81 76 277 6793 EIZO Europe GmbH Helmut-Grashoff-Strasse 18, 41179 Mönchengladbach, Germany Phone: +49 2161 8210210 Fax: +49 2161 8210150 924-8566 153 Copyright 0 2012 – 2021 EIZO Corporation All rights reserved. 4th Edition – August, 2021 Printed in Japan. OONOL779D1 (UM-FP-506-AL)








Leave a comment, question, review or page error below. Account not required.

This site uses Akismet to reduce spam. Learn how your comment data is processed.