DSE DSE9481 MKII (01) PDF MANUAL


Post questions, comments, reviews or errors in the comment box below.

Your File is Ready … Download PDF

CLICK HERE TO DOWNLOAD DSE DSE9481 MKII (01) PDF MANUAL


PDF Content Summary: Dimensions and Mounting DSE9150 12V 3A Overall size 108mm x 101mm x 49mm (4.25” x 3.98” x 1.91”) Weight 0.16kg Mounting type DIN rail or chassis mounting Din rail type EN 50022 35mm type only Mounting holes Suitable for M4 Mounting hole centres 91mm x 89mm (4.25” x 3.51”) Input voltage (nominal) 110V-240V Input voltage (absolute range) 90V-250V Charge failure relay rating 3A DC resistive, 30V maximum Operating Temperature -30°C to 55°C (-22°F to 131°F) Dimensions in mm unless stated Connection type Screw terminal, rising clamp, no internal spring Min cable size 0.5mm2 (AWG 20) Max cable size 2.5mm2 (AWG 14) Recommended AC fuse 230V AC Input 110V AC Input DSE9130 12V 5A charger DSE9140 12V 10A charger DSE9150 12V 3A charger DSE9155 30V 2A charger DSE9250 24V 3.7A charger DSE9255 24V 5A charger DSE9260 24V 10A charger DSE9470 MKII 24V 10A charger DSE9472 MKII 24V 5A charger DSE9480 MKII 12V 10A charger DSE9481 MKII 12V 5A charger 1.0A anti-surge 2.0A anti-surge 1.0A anti-surge 1.0A anti-surge 1.0A anti-surge 2.0A anti-surge 3.5A anti-surge 3.5A anti-surge 2.0A antisurge 2.0A anti-surge 1.0A antisurge 2.0A anti-surge 3.5A anti-surge 1.5A anti-surge 2.5A anti-surge 2.5A anti-surge 3.5A anti-surge 6.3A anti-surge 6.3A anti-surge 3.5A anti-surge 3.5A anti-surge 2.5A anti-surge 053-049 ISSUE 13 DSE9xxx Battery Charger Installation Instructions DEEP SEA ELECTRONICS DANGER OF DEATH : LIVE PARTS exist within the DSE9xxx enclosures. The enclosure cover must not be removed. Installation The DSE9xxx battery chargers are designed to be mounted within a control panel, on the panel DIN rail utilising the integral mounts or on a chassis utilising the mounting holes. For dimension and mounting details, see overleaf. The DSE9xxx battery chargers are fit-and-forget. It can be permanently connected to the supply and the load, with no requirement to disable the charger during times of heavy load (such as engine cranking) or when in parallel with a charging alternator. Battery suitability The charger is factory set by DSE to suit Lead Acid batteries. The DSE91xx & DSE92xx battery chargers can be adjusted at the time of ordering to suit other battery types. The DSE947x MKII & DSE948x MKII battery chargers are configured using the DSE Configuraiton Suite to suit other battery types. Care should be taken to ensure the batteries connected to the charger are of the correct ‘technology’ to suit the setting of the charger. Indications The DSE9xxx Battery Chargers feature an LED indicator(s) to show the battery charger Status. (Refer to DSE publication: 057-085 DSE9xxx Series Operator Manual for further information) Boost Mode (Not applicable to DSE9150 12V 2A or DSE9155 30V 2A) (DSE947x & DSE948x MKII Series Only. Boost feature is controlled automatically, no external connection needed.) Boost mode is operated by connecting the BOOST terminals together (for instance with an external switch or timer circuit. This will raise the battery charger floating voltage by 0.8V DC. Caution:- Boost mode is intended for equalisation of cells in lead acid batteries. CF not available on DSE9150 12V 2A Boost not available on DSE9150 12V 3A DSE9155 30V 2A DSE 91xx & 92xx Series Battery Chargers Typical Wiring Diagrams DSE 947x & 948x MKII Battery Chargers Dimensions and Mounting DSE9130 12V 5A DSE9250 24V 3.7A * DSE9155 30V 2A DSE9255 24V 5A * This model is no longer available Overall size 136mm x 140mm x 63mm (5.37” x 5.53” x 2.5”) Weight 0.5kg Mounting type DIN rail or chassis mounting Din rail type EN 50022 35mm type only Mounting holes Suitable for M4 Mounting hole centres 119.36mm x 128.36mm (4.7” x 5.05”) Input voltage (nominal) DSE9250-001 24V 3.7A DSE9250-002 24V 3.7A DSE9130 12V 5A DSE9255 24V 5A 110V-240V 110V-277V 110V-277V 110V-277V Input voltage (absolute range) DSE9250-001 24V 3.7A DSE9250-002 24V 3.7A DSE9130 12V 5A DSE9255 24V 5A 90V-265V 90V-305V 90V-305V 90V-305V Charge failure relay rating 3A DC resistive, 30V maximum Operating Temperature -30°C to 55°C (-22°F to 131°F) Dimensions in mm unless stated Deep Sea Electronics Plc. Tel:+44 (0)1723 890099 Fax: +44 (0)1723 893303 Email: sales@deepseaplc.com Web: deepseaplc.com Deep Sea Electronics Inc. Phone: +1 (815) 316-8706 Fax: +1 (815) 316- 8708 Email: sales@deepseausa.com Web: deepseausa.com Dimensions and Mounting DSE9140 12V 10A DSE9260 24V 10A Overall size 152mm x 188mm x 62mm (6” x 7.4”x 2.44”) Weight DSE9140 12V 10A DSE9260 24V 10A 0.75kg 0.85kg Mounting type DIN rail or chassis mounting Din rail type EN 50022 35mm type only Mounting holes Suitable for M4 Mounting hole centres 142mm x 128mm (5.59” x 5.0”) Input voltage (nominal) 110V-277V Input voltage (absolute range) 90V-305V Charge failure relay rating 3A DC resistive 30V Maximum Operating Temperature -30°C to 55°C (-22°F to 131°F) Dimensions in mm unless stated NOTE : DSE9000 series chargers are designed to be mounted with the base to a vertical surface with the terminal strips at the bottom. NOTE : This document is intended as a ‘quick start’ guide only. For full operating instructions and specifications, refer to DSE publication: 057-085 DSE9xxx Series Operator Manual 6in 2.44in 7.4 in Dimensions and Mounting Intelligent Battery Chargers DSE9481 MKII 12V 5A DSE9472 MKII 24V 5A DSE9480 MKII 12V 10A DSE9470 MKII 24V 10A Overall size 205mm x 135mm x 80mm (8.1” x 5.3” x 3.1”) Weight DSE9470 MKII DSE9472/80/81 MKII 0.78kg 0.7kg Mounting type DIN rail or chassis mounting Din rail type EN 50022 35mm type only Mounting holes Suitable for M4 Mounting hole centres 190mm x 120mm (7.5” x 4.7”) Input voltage (nominal) 110V-277V Input voltage (absolute range) 95V-305V Charge failure relay rating 3A DC resistive 30V maximum Operating Temperature -30°C to 85°C with de-rating (-22°F to 185°F) Optional Temperature Sensor NTC connections for PT1000 sensor only Communications RS485 PC connection (USB) To enable PC Configuration Dimensions in mm unless stated


FREE ENGLISH PDF

OPERATING INSTRUCTIONS

USER GUIDE - USER MANUAL

OWNER GUIDE - OWNER MANUAL

REFERENCE GUIDE - REFERENCE MANUAL

INSTRUCTION GUIDE - INSTRUCTION MANUAL

Leave a Reply