Free English ADVANTECH 98910770500 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD ADVANTECH 98910770500 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
What items are included in the packing list for the ADVANTECH 98910770500?
Before you begin installing your ADVANTECH 98910770500, please make sure that the following items have been shipped:
1. 98910770500 Flex I/O
2. 4 x M3 screw (P/N: 1930005673-11)
3. 1x 4x GbE POE FIO cover (PN: 1960094142N001)
If any of these items are missing or damaged, please contact your distributor or sales representative immediately.
Where can I find the software driver for the ADVANTECH 98910770500?
The driver for the ADVANTECH 98910770500 is provided on the 98910770500 product page. Please download it and install.
What are the general specifications of the ADVANTECH 98910770500?
The general specifications for the ADVANTECH 98910770500 4x GbE PoE Flex I/O are as follows:
• Support 4x GbE PoE
• Chipset: 1x Intel i350 Ethernet controller
• Interface: B/B connector, 1x PCIe x4 for Intel i350
• LAN speed: 10/100/1000 Mbps
• PoE Output Power: Max. 10W per port (Total Max. 40W), 802.3.af PoE Compliant
• Support PoE on/off control
• Supports Model: MIC-770 (* Q SKU only)
How do the PoE LED status indicators work on the ADVANTECH 98910770500?
The PoE LED Status Indicators on the ADVANTECH 98910770500 function as follows:
– PoE power on, status normal: LED On
– PoE power status abnormal (port over load, port short circuit, port failed at startup): LED 0.8Hz Blink
– PoE power off: LED Off
What are the environmental and mechanical specifications for the ADVANTECH 98910770500?
Mechanical and Environmental
• Operating Temperature: -10 ~ 40° C with 0.7 m/sec air flow: with Industrial SSD
• Storage Temperature: -40 ~ 85° C (-40~185° F)
• Relative Humidity: 95% @ 40° C (non-condensing)
• Dimensions (L x W): 169 x 156 mm
• Net Weight: 0.09 Kg
What are the connectors and their functions on the ADVANTECH 98910770500?
| P/N | Connector | Function |
|---|---|---|
| 98910770500 | RJ45 | CH1~4 |
What are the FCC compliance conditions for the ADVANTECH 98910770500?
The ADVANTECH 98910770500 device complies with the requirements in Part 15 of the FCC rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference;
2. This device must accept any interference received, including interference that may cause undesired operation.
How do I install the ADVANTECH 98910770500 into a MIC-770 system?
The ADVANTECH 98910770500 is supported by the MIC-770 (*Q SKU only). Follow the steps below for installation.
Preparation:
Disassemble the bottom cover and 2x front FIO covers from MIC-770.
Disassemble HDD tray from MIC-770.
Assemble Advanced Flex I/O:
1. Assemble the PoE FIO cover.
2. Align the 98910770500 B/B connector (male) to the B/B connector (female) on the MIC-770 main board. Then assemble the 98910770500 with 3x M3 screws.
Note: The 4x GbE PoE only occupies one system I/O port.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD ADVANTECH 98910770500 (01) PDF DOCUMENT