Post questions, comments, reviews or page errors in the comment box below.
PDF Content Summary:
****** Page 1 ****** Acer Projector KI Series User’s Guide
****** Page 2 ****** Copyright 0 2015. Acer Incorporated. All Rights Reserved. Acer Projector User’s Guide Original Issue: 09/2015 Changes may be made periodically to the information in this publication without obligation to notify any person of such revisions or changes. Such changes will be incorporated in new editions of th is manual or supplementary documents and publications. Th is company makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims the implied warranties of merchantability or fitness for a particu lar purpose. Record the model number, serial number, purchase date and place of purchase information in the space provided below. The serial number and model number are recorded on the label affixed to your projector. All correspondence concerning your un it shou ld include the serial number, model number and purchase information. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electron ically, mechanically, by photocopy, recording or otherwise, without the prior written permission of Acer Incorporated. Model number: Serial number: Date of purchase: Place of purchase: Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies’ product names or trademarks are used herein for identification purposes only and belong to their respective companies. HDMITM, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. I” For DTS patents, see patents.dts.corn. Manufactured under license from DTS Licensing Limited. DTSf the Symbol, & DTS and the Symbo together are registered trademarks, and DTS Sound is a trademark of DTS, Inc. O DTS, Inc. All Rights Reserved. S o und
****** Page 3 ****** iii Information for your safety and comfort Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. Turning the product off before cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning Caution for plug as disconnecting device Observe the following guidelines when connecting and disconnecting power to the external power supply unit: Install the power supply unit before connecting the power cord to the AC power outlet. Unplug the power cord before removing the power supply unit from the projector. If the system has multiple sources of power, disconnect power from the system by unplugging all power cords from the power supplies. Caution for Accessibility Be sure that the power outlet you plug the power cord into is easily accessible and located as close to the equipment operator as possible. When you need to disconnect power to the equipment, be sure to unplug the power cord from the electrical outlet. Warnings! Do not use this product near water. Do not place this product on an unstable cart, stand or table. If the product falls, it could be seriously damaged. Slots and openings are provided for ventilation to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should never be placed near or over a radiator or heat register, or in a built-in installation unless proper ventilation is provided. Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind onto or into the product.
****** Page 4 ****** To avoid damage of internal components and to prevent battery leakage, do not place the product on a vibrating surface. Never use it under sporting, exercising, or any vibrating environment which will probably cause unexpected short current or damage rotor devices. Using electrical power This product should be operated from the type of power indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company. Do not allow anything to rest on the power cord. Do not locate this product where people will walk on the cord. If an extension cord is used with this product, make sure that the total ampere rating of the equipment plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure that the total rating of all products plugged into the wall outlet does not exceed the fuse rating. Do not overload a power outlet, strip or receptacle by plugging in too many devices. The overall system load must not exceed 80% of the branch circuit rating. If power strips are used, the load should not exceed 80% of the power strip’s input rating This product’s AC adapter is equipped with a three-wire grounded plug The plug only fits in a grounded power outlet. Make sure the power outlet is properly grounded before inserting the AC adapter plug. Do not insert the plug into a non-grounded power outlet. Contact your electrician for details. Warning! The grounding pin is a safety feature. Using a power outlet that is not properly grounded may result in electric shock and/or injury. Note: The grounding pin also provides good protection from unexpected noise produced by other nearby electrical devices that may interfere with the performance of this product. Use the product only with the supplied power supply cord set. If you need to replace the power cord set, make sure that the new power cord meets the following requirements: detachable type, UL listed/CSA certified, VDE approved or its equivalent, 4.5 meters (15 feet) maximum length.
****** Page 5 ****** Product servicing Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel. Unplug this product from the wall outlet and refer servicing to qualified service personnel when: the power cord or plug is damaged, cut or frayed liquid was spilled into the product the product was exposed to rain or water the product has been dropped or the case has been damaged the product exhibits a distinct change in performance, indicating a need for service the product does not operate normally after following the operating instructions Note: Adjust only those controls that are covered by the operating instructions, since improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal condition. Warning! For safety reasons, do not use non-compliant parts when adding or changing components. Consult your reseller for purchase options. Your device and its enhancements may contain small parts. Keep them out of the reach of small children. Additional safety information Do not look into the projector’s lens when the light is on. The bright may hurt your eyes. Turn on the projector first and then signal sources Do not place the product in following environments: Space that is poorly ventilated or confined. At least 50cm clearance from walls and free flow of air around the projector is necessary. Locations where temperatures may become excessively high, such as inside of a car with all windows rolled up Locations where excessive hum idity, dust, or cigarette smoke may contam inate optical components, shortening the life span and darken ing the image. Locations near fire alarms. Locations with an ambient temperature above 40 oc/104 OF. Locations where the altitudes are higher than 10000 feet. Unplug immediately if there is something wrong with your projector. Do not operate if smoke, strange noise or odor comes out of your projector. It
****** Page 6 ****** VI might cause fire or electric shock. In this case, unplug immediately and contact your dealer. Do not keep using this product to break or drop it. In this case contact your dealer for inspection. Do not face the projector lens to the sun. It can lead to fire. When switching the projector off, suggest to ensure the projector completes its cooling cycle before disconnecting power. Do not frequently turn off the main power abruptly or unplug the projector during operation. The best way is to wait for the fan to turn off before turning main power off. Do not touch air outlet grille and bottom plate which becomes hot. Clean the air filter frequently if have. The temperature inside may rise and cause damage when the filter/ventilation slots clogged with dirt or dust. Do not look into the air outlet grille when projector is operating. It may hurt your eyes. Always open the lens shutter or remove the lens cap when the projector is on. Do not block the projector lens with any object when the projector is under operation as this could cause the object to become heated and deformed or even cause a fire. Do not attempt to disassemble this projector. There are dangerous high voltages inside which may hurt you. Refer servicing only to suitable qualified professional service personnel Do not stand the projector on end vertically. It may cause the projector to fall over, causing injury or damage. Caution for Listening To protect your hearing, follow these instructions. Increase the volume gradually until you can hear clearly and comfortably. Do not increase the volume level after your ears have adjusted. Do not listen to music at high volumes for extended periods. Do not increase the volume to block out noisy surroundings. Decrease the volume if you can ‘t hear people speaking near you.
****** Page 7 ****** vii Disposal instructions Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle. For more information on the Waste from Electrical and Electronics Equipment (WEEE) regulations, visit acer-group.com/public/Sustainability/sustainability01.htm
****** Page 8 ****** VIII First things first Usage Notes Do: Turn off the product before cleaning. Use a soft cloth moistened with mild detergent to clean the display housing. Disconnect the power plug from AC outlet if the product is not being used for a long period of time. Don’t: Block the slots and openings on the unit provided for ventilation. Use abrasive cleaners, waxes or solvents to clean the unit. Use under the following conditions: In extremely hot, cold or humid environments. In areas susceptible to excessive dust and dirt. Near any appliance that generates a strong magnetic field. Place In direct sunlight. Precautions Follow all warnings, precautions and maintenance as recommended in this user’s guide to maximize the life of your unit. Warning: Do not look into the projector’s lens when the light is on. The bright may hurt your eyes. To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. Please do not open or disassemble the product as this may cause electric shock. When switching the projector off, please ensure the projector completes its cooling cycle before disconnecting power. Turn on the projector first and then the signal sources. Do not use lens cap when projector is in operation.
****** Page 9 ****** Information for your safety and comfort First things first Usage Notes Precautions Introduction Product Features Package Overview Projector Overview Projector Outlook Control Panel Remote Control Layout MHL (Mobile High-Definition Link) Control Getting Started Connecting the Projector DC 5V Out for Device Charge Turning the Projector On/Off Turning on the Projector Turning the projector off Adjusting the Projected Image Adjusting the Height of Projected Image How to optimize image size and distance Under Operation with Battery LED Indicator / Messages Display Mode and Battery Capacity DC 5V Out for Device Charge User Controls Installation menu Onscreen Display (OSD) Menus Color I ma ge Setting Management Audio iii viii VIII VIII 1 2 3 3 4 6 8 9 9 10 11 11 12 13 13 14 15 15 16 16 17 17 18 19 20 22 22 23
****** Page 10 ****** Language Appendices Troubleshooting LED & Alarm Definition Listing LED Indicator / Messages Specifications Display Mode and Battery Capacity Compatibility modes Regulations and safety notices 23 24 25 25 30 30 31 33 34 38
****** Page 11 ****** 1 Introduction Product Features This product is a single-chip DLP@ projector. Outstanding features include: DLP@ technology 1280 x 800 WXGA resolution 4:3/16:9/Full/L.Box aspect ratio supported. Versatile display modes (Bright, Standard, Movie, Picture, Game, User) enable optimum performance in any situation. Compact size projector facilitates business purposes and home entertainment. Acer EcoProjeciton Technology delivers Intelligent power management approach and physical efficiency improvement. Equipped with HDMITM connection supporting HDCP. Advanced digital keystone correction delivers optimum presentations. Multi-language on screen display (OSD) menus. 1.7x digital zoom and pan move function. Environmental light source and longer life by LED solution. Microsoft@ Windows@ XP, Vista@, Windows@ 7, Windows@ 8, Windows@ 8.1, Windows@ 10, Macintosh@ OS compliant. Support MHL V2.O signal display. Support LumiSense+ Support BT audio speaker. Built-in two 3 Watts speaker with dtsTM feature. Built-in battery Support wireless projection
****** Page 12 ****** 2 Package Overview This projector comes with all the items shown below. Check to make sure your unit is complete. Contact your dealer immediately if any thing is missing Projector acc Remote control Quick start gu ide WirelessProjection-Kit WirelessHD-Kit (option) User’s guide (for multi-media and wireless functions) Power cord Battery Carrying case MHL cable (option) WirelessAndroid-Kit (option) Quick start guide (for multi-media and wireless functions) AC to DC power adapter User’s guide VGA cable HDMI cable (option) WirelessCAST (option)
****** Page 13 ****** Projector Overview Projector Outlook Front / upper side 6 2 Description 1 2 3 Projection lens Tilt adjusting wheel Focus ring 3 4 5 6 Rear side 3 6 Description Control panel Power button Speakers IXWOUT BATTERY _ awarr 12 3 4 5 6789 10 11 12 13 escnptlon 1 2 3 4 5 6 7 escnptlon Remote control receiver KensingtonTM lock port Battery on/off button (see Note 1.) PC analog signal/HDTV/component video input connector (VGA IN) Audio input connector HDMI/MHL connector USB Connector, see Note 2. (Support USB flash disk and flash memory storage access) 8 9 10 11 12 13 Micro SD slot LAN (RJ45 Port for 101100M Ethernet) Audio out connector 5V DC output connector (device charge on ly) DC Input For Acer WirelessProjection-Kit only, see Note 3.
****** Page 14 ****** 4 Note 1: The design mechanism of ” Battery On/Off button” is to protect projector from powering on by touching power button accidentally. To power on projector, press i’ Battery On/Off’i button first and then press power button within 60 sec. Note 2: It is not allowed to plug in Acer WirelessProjection-Kit or other USB WiFi dongle. Note 3: Acer WirelessProjection-Kit is only allowed to be installed while projector is off; forbidden to plug out or installed while projector is active. Control Panel TEMP LAMP BATT MENU BACK 12 8 9 10 5 11 8 Description 1 2 3 4 5 6 Icon TEMP LAMP BATT 2 3 4 5 6 7 13 Function LED Indicator LED Indicator LED Indicator POWER SOURCE NTER Volume MENU MENU Overheat temperature warning Lamp problem warning Show battery status by colors (Details see LED indicator page) See the contents in ” Turning the Projector On/Off” section. Increases/decreases the volume. Press i’ MENU” to launch the Onscreen display (OSD) menu, back to the previous step for the OSD menu operation or exit the OSD menu. Confirm your selection of items.
****** Page 15 ****** Icon BACK 7 8 9 SOURCE 10 11 12 13 A ENTER O Function Back/Exit Stop Keystone SOURCE Four directional select keys Select/Enter Play/Pause Ambient light sensor Display Key 5 Description Press ” BACK” to go back one menu step To exit the file. (only for Navigation mode) Discontinues playback. (only for Multi- Media mode) Adjusts the image to compensate for distortion caused by tilting the projector. (±20 degrees) Changes the active source. Use to select items or make adjustments to your selection. Press to select/enter the file. (only for Navigation mode) Toggles between playback and pause. (only for Multi-Media mode) Detect ambient light if LumiSense+ is triggered Long press DOWN key will pop up a screen to ask if end user needs to do screen off.
****** Page 16 ****** 6 Remote Control Layout 1 3 4 13 5 14 6 7 8 CCC d) 2 9 15 9 10 11 12 PLA æer 2 3 4 5 6 7 8 9 10 11 12 con EDIA BACK unction Infrared tr an sm itter POWER SOURCE MENU Four directional select keys MEDIA BACK KEYSTONE Select/Enter Play/Pause MODE ZOOM escrip Ion Sends signals to the projector. Refer to the “Turning the Projector On/Off’l section. Changes the active source. Press ” MENU” to launch the Onscreen display (OSD) menu, back to the previous step for the OSD menu operation or exit the OSD menu. Confirm your selection of items. Use up, down, left, right buttons to select items or make adjustments to your selection. Press ” MEDIA” to return to the home page of media mode. Press “BACK” to go back one menu step. Press “3D” to select 3D models. Adjusts the image to compensate for distortion caused by tilting the projector. Press to select/enter the file. (only for Navigation mode) Toggles between playback and pause. (on ly for Multi-Media mode) Press ” MODE” to select the display mode from Bright, Standard, Movie, Picture, Game and User. Zooms the projector display in or out
****** Page 17 ****** 7 Description 13 14 15 Icon Function Increases the volume. Volume UP Decreases the volume. Volume Down Long press DOWN key will pop up a screen to ask if end user Display Key needs to do screen off. Note 1: Functions vary depending on model definition. Note 2: Before using the remote control for the first time, remove the transparent insulation tape in the bottom of remote control.
****** Page 18 ****** 8 MHL (Mobile High-Definition Link) Control MHL Control Mode Navigation 1 2 3 5 4 9 10 11 7 6 8 2 3 4 5 6 7 8 9 10 11 Next Mode •••.i*mce Next Mode con V NTER MOOE Exit MHL Contrd MHL Control Mode Multi-Media MENU escnp Ion un Ion SOURCE MENU Four directional select keys MEDIA Volume Down Volume UP Volume UP Volume Down Back/Exit Stop Select/Enter Play/Pause MODE Press the “SOURCE” button to toggle between Navigation or Multi-Media mode. Press to launch the root memu. (on ly for Navigation mode) Use up, down, left, right buttons to select items or make adjustments to your selection. (on ly for Navigation mode) Press “MEDIA” to return to the home page of media mode. (on ly for Multi-Media mode) Decreases the volume. (on ly for Multi-Media mode) Increases the volume. (on ly for Multi-Media mode) Increases the volume. (only for Navigation mode) Decreases the volume. (on ly for Navigation mode) Press “BACK” to go back one menu step. To exit the file. (on ly for Navigation mode) Discontinues playback. (on ly for Multi-Media mode) Press to select/enter the file. (only for Navigation mode) Toggles between playback and pause. (only for Multi- Media mode) Press “MODE” button for one second to activate the MHL Control Mode. To exit, press the “MODE” button again. Note: Functions vary depending on model definition.
****** Page 19 ****** Getting Started Connecting the Projector Internet 4 3 5 7 muon n _ OWOFF o iPod/lPhoneflPad D-Sub HDMI 8 9 HDMI 10 11 MHL 9 2 IPodflPhone/lPad battery charging 13 12 —eooo 1 2 3 4 5 6 7 Description AC to DC power adapter Power cord USB WiFi adapter LAN cable Micro SD card (*) USB disk/stick Audio cable Jack/Jack DVD player Description VGA cable 8 HDMI cable 9 10 MHL cable (MicroUSB to HDMI) WirelessCAST 11 Audio cable Jack/RCA 12 USB cable for charging device (See 13 details in DC 5V Out for Device Charge) Note 1: Functions vary depending on model definition. Note 2: Some smartphones require a converter (supplied by smartphone maker) to enable the MHL function. Note 3: ‘i*” USB drive limitation, do not support power consumption over 500mA. Please have external power for USB
****** Page 20 ****** 10 device. Note 4: To ensure the projector works well with your comp uter, please make sure the timing of the display mode is compatible with the projector. Note 5: USB cable needs powered extender if the length is over 5 m. DC 5V Out for Device Charge 1 2 3 In standby mode (after turning off projector), It will supply power DC 5V to connected device while pressing Battery button. DC 5V will be turned off automatically in 60 sec while device charging is full charge or disconnected. In active mode (after turning on projector), MHL and DC 5V are alternatively powered on, ex. DC 5V is off when MHL is on and DC 5V is on when MHL is off. In active mode, MHL will be top priority if both DC 5V and MHL port are occup ied Note: USB DC 5V out connector support 5V/1 .OA power output for power bank charging only when MHL source is not detected.
****** Page 21 ****** 11 Turning the Projector On/Off Turning on the Projector 1 2 3 4 5 Remove the lens cap.(lllustration #1) Ensure that the power cord and signal cable are securely connected. The Power indicator LED will turn red. Under battery-powered, press the I’ Battery ON / OFF” key first (Illustration #2), and the B TTY LED lights, Power indicator LED blanks red. Within 60 seconds, press the “Power” button to turn the projector on. Over time, the projector will return to primeval state, and restart this step. Turn on the projector by pressing “Power” button on the control panel or the remote control, and the Power indicator LED will turn blue.(lllustration #3) Turn on your source (computer, notebook, video player ,etc.). The projector will detect your source automatically. If the screen displays ” No Signal”, please make sure the signal cables are securely connected. If you connect to multiple sources at the same time, use the “Source” button on either control panel or the remote control or direct source key on the remote control to switch between inputs. Battery On/Off button Q) 3 Power button 1 Lens cap 2 o BATTERY m.1/OFF VGAIN Note: For 1ST time usage, please plug in DC power and press power button when power LED turn RED.
****** Page 22 ****** 12 Turning the projector off 1 2 3 To turn the projector off, press the power button. This message appears: ” Please press the power button again to complete the shutdown process. Press the power button again. The LED power indicator will stop blinking and turn solid red to indicate standby mode after the projector is turned off. It is now safe to unplug the power cord. Warning indicators: “Projector Overheated. Will automatically turn off soon. ” This onscreen message indicates that the projector has overheated. The projector will automatically shut down. Contact your local dealer or service center. “Fan failed. Will automatically turn off soon. ” This onscreen message indicates that the fan has failed. The projector will automatically shut down. Contact your local dealer or service center. Note: Whenever the projector automatically shuts down, contact your local reseller or service center.
****** Page 23 ****** 13 Adjusting the Projected Image Adjusting the Height of Projected Image The projector is equipped with tilt adjusting wheel for adjusting the height of image. To raise/lower the image: Use Tilt adjusting wheel to fine-tune the display angle. 1 1 1 Tilt adjusting wheel
****** Page 24 ****** 14 How to optimize image size and distance Consult the table below to find the optimal image sizes achievable when the projector is positioned at a desired distance from the screen. Example: If the projector is 1.50 m from the screen, good image quality is possible for image sizes 87.1″ Note: Remind as below figure, the space of 117 cm height is required when located at 1.50 m distance. Desired Distance (m) 1.50 Desired Distance Screen Size (Min zoom) Diagonal (inch) 0.43 0.86 1.00 1.14 1.28 1.42 1.50 1.72 Zoom Ratio: 1.0x 25.0 49.9 58.0 66.2 74.3 82.4 87.1 99.8 W (cm) x H (cm) 54 x 34 108 x 67 125 x 78 143 x 89 160x 100 178 x 111 188 x 117 215 x 134 Height: 117 cm Top From base to top of image (cm) 34 67 78 89 100 111 117 134
****** Page 25 ****** Under Operation with Battery LED Indicator / Messages Standby Power On LED Adapter Power (Battery: Off) Adapter Power (Battery: On) Battery Power (Battery: Off) Battery Power (Battery: On) Adapter power Battery power Adapter power Overheated Battery power Adapter power FAN Fail Battery power Adapter power LED Fail Battery power POWER LED Red Red (F lash ing) Red (Flash ing 1 min.) Blue Blue Blue Blue LAMP Red TEMP Red Red (Flash ing) 15 BATTERY Orange (In Charge) Green (End of Charge) Green Orange (300/0000/0) Red Orange In C arge Green (End of Charge) Green Orange (300/0000/0) Red Orange In C arge Green (End of Charge) Green Orange (300/0000/0) Red Orange In C arge Green (End of Charge) Green Orange (300/0000/0) Red Orange In C arge Green (End of Charge) Green Orange (300/0000/0) Red Note: When power on, click any key, Menu/Up/Down/Left/Right key LED will all be trigger.
****** Page 26 ****** 16 Display Mode and Battery Capacity Referenced Operating Scenarios Display a movie by DVD player via HDMI port Local play USB flash thumb content Connect ChromeCast (display videos via Youtube) Source “LANNViFi” and do wireless projection via mobile Movie Mode (Display Hours) 3.0hrs 2.5hrs 2.5hrs 2.5hrs Standard Mode (Display Hours) 1.5hrs 1.2hrs 1.2hrs 1.2hrs Note 1: The above table is based on battery mode (without plugging power adapter). Note 2: The above table is at maximum volume and USB WiFi is active. Battery status is from full to end. Note 3: The battery capacity will be decreased by longer time and more recycling times. The above table is for reference only. Note 4: Keep the power more than 30% always for better cell life. Note 5: Full recharge the power bank at least every 3 months. Note 6: For 1ST time usage, please plug in DC power to recharge battery 8hrs. DC 5V Out for Device Charge 1 2 3 In standby mode (after turning off projector), It will supply power DC 5V to connected device while pressing Battery button. DC 5V will be turned off automatically in 60 sec while device charging is full charge or disconnected. In active mode (after turning on projector), MHL and DC 5V are alternatively powered on, ex. DC 5V is off when MHL is on and DC 5V is on when MHL is off. In active mode, MHL will be top priority if both DC 5V and MHL port are occup ied Note: USB DC 5V out connector support 5V/1.0A power output for power bank charging only when MHL source is not detected.
****** Page 27 ****** 17 User Controls Installation menu The installation menu provides an onscreen display (OSD) for projector installation and maintenance. Use the OSD only when the message “No signal input” is displayed on the screen. The menu options include settings and adjustments for screen size and distance, focus, keystone correction and more . 1 2 3 4 5 Turn on the projector by pressing ” Power” button on the control pad. Press the ” MENU” button on the control pad to launch the OSD for projector installation and maintenance. The background pattern acts as a guide to adjusting the calibration and alignment settings, such as screen size and distance, focus and more. Note: The OSD screenshot is for reference only and may differ from the actual design. The Installation menu includes the following options. Use the up and down arrow keys to select an option, the left and right arrow keys to adjust selected option settings, and the right arrow key to enter a submenu for feature setting. The new settings will be saved automatically upon exiting the menu. Press the i’ MENU” anytime to exit the menu and return to the Acer welcome screen.
****** Page 28 ****** 18 Onscreen Display (OSD) Menus The projector has multilingual OSD that allow you to make image adjustments and change a variety of settings. Using the OSD menus To open the OSD menu, press “MENU” on the remote control. When the OSD is displayed, use the A v keys to select any item in the main menu. After selecting the desired main menu item, press to enter submenu for feature setting. Use the A v keys to select the desired item and adjust the settings by using the keys. Select the next item to be adjusted in the submenu and adjust as described above. Press ” MENU” on the remote control, the screen will return to the main menu. To exit OSD, press “MENU” on the remote control again. The OSD menu will close and the projector will automatically save the new settings. Main menu ABC Color LumiSense OiSPlay Mode Wall Color Brightness Contrast S&tur au on Tint Advanced Sub menu Auto enght aright so C enter Setting Exit Note: Some of the following OSD settings may not be available. Please refer to the actual OSD of your projector.
****** Page 29 ****** Color LumiSense Display Mode Wall color Brightness Contrast Saturation Tint 19 The light sensor of LumiSense+ technology can intelligently optim ize the brightness and color saturation of projected image based on actual ambient light. The feature greatly enhances dark detail visibility and color saturation. • Off: For normal mode. (ambient light sensor is off) • Auto Bright: Light sensor is on to automatically detect ambient light and optimize the brightness and color saturation of projected image. • Dynamic Black:automatically optimize the display of dark movie scenes enabling them to be shown in incredible detail. : 1. Dynamic Black shows up while in Movie mode. 2. Dynamic Black is not supported while in battery mode. There are many factory presets optimized for various types of mages. Bright: For brightness optimization. Standard: For common environment. Movie: For brighter and general movie/video/photo playing Picture: For graphic picture. Game: For game content. User: Memorize user’s settings. : Bettery mode only have Standard, Movie and User mode. Use this function to choose a proper color according to the wall. There are several choices, including wh ite, light yellow, light blue, pink, dark green. It will compensate the color deviation due to the wall color to show the correct image tone. Adjust the brightness of the image. Press to darken image. Press to lighten the image. “Contrast” controls the difference between the lightest and darkest parts of the picture. Adjusting the contrast changes the amount of black and white in the image. Press < to decrease the contrast. Press to increase the contrast. Adjust a video image from black and wh ite to fully saturated color Press to decrease the amount of color in the image. Press to increase the amount of color in the image. Adjust the color balance of red and green. Press to increase the amount of green in the image. Press to increase the amount of red in the image. ****** Page 30 ****** 20 Advanced Color Temperature Use this function to choose CT 1, CT 2, CT3. Degamma Effects the representation of dark scenery. With greater gamma value, dark scenery will look brighter. Note: "Saturation " and "Tint" functions are not supported under computer mode or HDMI mode. Image Projection Mode Projection Location Aspect Ratio Auto Keystone Manual Keystone Sharpness Front: The factory default setting. Rear: Reverses the image so you can project from behind a translucent screen. Auto: Automatically adjusts projection location of image. Desktop Ceiling: Turns the image upside down for ceiling-mounted projection. Use th is function to choose your desired aspect ratio. Auto: Keep the image with original width-higth ratio and maxi mize the image to fit native horizontal or vertical pixels. 4:3: The image will be scaled to fit the screen and displayed using a 4:3 ratio. 16:9: The image will be scaled to fit the width of the screen and the height adjusted to display the image using a 16:9 ratio. Full: Resize image to fit full screen by width (1280 pixels) and height (800 pixels) L.Box: Keep original signal aspect ratio and zoom in by 1.333 times. Automatically adjusts vertical image. Adjust image distortion caused by tilting projection. (±20 degrees) The Manual Keystone function is unavailable under Auto Keystone setting to “On . Adjust the sharpness of the image. Press < to decrease the sharpness. Press to increase the sharpness. ****** Page 31 ****** H. Position V. Position Frequency Tracking Press Press Press Press 21 to move the image left. to move the image right. to move the image down. to move the image up. "Frequency" changes the projector's refresh rate to match the frequency of your computer's graphics card. If you can see a vertical flickering bar in the projected image, use this function to make the necessary adjustments. Synchron izes the signal timing of the projector with the graph ics card If you experience an unstable or flickering image, use th is function to correct it. HDMI Color Range Adjust the color range of the HDMI image data to correct color display error. Auto: Automatically adjust by information from player. Limited Range: Prosess the input image as limited color range data. Full Range: Prosess the input image as full color range data. HDMI Scan Info Adjust the overscan ratio of the HDMI image on screen. Auto: Automatically adjust by information from player. Underscan: Always no overscan on HDMI image. Overscan: Always keep overscan on HDMI image. Note 1: "H. Position 'I, "V. Position", "Frequency" and "Tracking" functions are not supported under HDMI, DVI or Video mode. Note 2: "Sharpness" functions is not supported under HDMI (RGB) or Computer mode. Note 3: "HDMI Color Range" and "HDMI Scan Info" functions are only supported under HDMI mode. ****** Page 32 ****** 22 Setting Network Reset LAN Reset To refresh LAN IP. LAN IP/Mask Identify IP and Mask address. (LAN Mode) WiFi IP/Mask Identify IP and Mask address. (WiFi Mode) “WiFi IP/Mask” will grey out if Acer WirelessProjection-Kit isn’t being installed. Press the button and choose “Yes” to return the parameters on all menus to the factory default settings. Note 1: Functions vary depending on model defin ition. Note 2: Acer WirelessProjection-Kit is only allowed to be installed wh ile projector is off; forbidden to plug out or installed wh ile projector is active. Management ECO Mode High Altitude Auto Shutdown AC Power On Choose “On” to dim the projector LED brightness which will lower power consumption, extend the LED life and reduce noise. Choose “Off” to return normal mode. Choose “On ” to turn on High Altitude mode. Operate the fans at fu II speed continuously to allow for proper high altitude cooling of the projector. The projector will automatically shutdown when there is no signal input after the allocated time. (default is 15 minutes) Choose “On” to power on projector while AC power plug in.
****** Page 33 ****** Audio Volume BT Speaker DTS Sound Treble Bass Mute Alarm Volume 3D LR Invert 3D Warning Message Press < to decrease the volume. Press to increase the volume. Adjust Bluetooth Headset Speaker. Show "Connected " Connected" and Press , to enter pop-up menu. Bluetooth: Turn on/off the Bluetooth. 23 or " Not- Device Search: This function to list BT speakers (wh ich is in paring mode and with A2DP service) and connect manually by user. Internal speaker off while BT speaker connection is connected successfully. DTS SoundTM is a sound enrichment su ite that includes several post processing techniques to expand the sound image, enhance bass, improve defin ition and add natural surround effects. Choose “On ” to enable DTS Sound. Choose “Off” to disable DTS Sound Adjust tones of high frequency. Adjust tones of low frequency. Choose “On ” to mute the volume. Choose “Off” to restore the volume. Select this function to adjust the volume of any warning notifications. Choose “On ” to enable DLP 3D function. • On: Choose this item while using DLP 3D glasses, quad buffer (NVIDIA/ATI…) graph ic card and HQFS format file or DVD with corresponding SW player. • Off: Turn oft 3D mode. If you see a discrete or overlapping image while wearing DLP 3D glasses, you may need to execute ” Invert” to get best match of left/right image sequence to get the correct image (for DLP 3D). Choose “On ” to display the 3D warning message. Note: 30 display is now enabled Please make sure you have the correct 30 signals and glasses, 2. Remember to turn 3D off if dcnt want to see 30 images. a. Ifthe 30 display isnt correct. please try to enable 3D Sync Irwert. 4, Display mode options be disabled while in 30 mode, Note 1: It needs correct settings on graph ic card 3D application program for correct 3D display. Note 2: The SW players, such as Stereoscopic Player and DDD TriDef Media
****** Page 34 ****** 24 Player can support 3D format files. You can download these three players on web page below, – Stereoscopic Player (Trial): 3dtv.at/Downloads/lndex_en.aspx – DDD TriDef Media Player (Trial): tridef.com/down load/TriDef-3-D-Experience-4.0.2.html Note 3: “3D L/R Invert” is only available when 3D is enabled. Note 4: There has rem inder screen if 3D still enable when power on projector. Please adjust setting depended on your purpose. Language Language Choose the multilingual OSD menu. Use the A or v key to select your preferred menu language. Press to confirm the selection. Note: Functions vary depending on model definition.
****** Page 35 ****** 25 Appendices Troubleshooting If you experience a problem with your Acer projector, refer to the following troubleshooting guide. If the problem persists, please contact your local reseller or service center. Image Problems and Solutions 2 Problem No image appears onscreen Partial, scrolling or incorrectly displayed image (For PC (Windows 95/98/2000/XP/ VistaWin7Win 8)) Solution Connected as described in the “Getting Started” section. Ensure none of the connector pins are bent or broken. Make sure you have removed the lens cap and the projector is switched on. For an incorrectly displayed image: Open “My Computer,” open the “Control Panel,” and then double-click the “Display” Icon. Select the “Settings” tab Verify that your display resolution setting is lower than or equal to 1080P-ElA. Click the “Advanced Properties” button. If the problem still appears, change the monitor display you are using and follow the steps below Verify that the resolution setting is lower than or equal to 1080P-ElA. Click the “Change” button under the ” Mon itor” tab. Click “Show all devices”. Next, select “Standard mon itor types” under the SP box, and choose the resolution mode you need under the ” Models” box. Verify that the resolution setting of the mon itor display is lower than or equal to 1080P-ElA.
****** Page 36 ****** 26 3 4 5 6 7 8 Partial, scrolling or incorrectly displayed image (for notebooks) The screen of the notebook computer is not displaying your presentation Image is unstable or flickering Image has vertical flickering bar Image is out of focus Image is stretched when displaying a ” widescreen DVD title For an incorrectly displayed image: Follow the steps for item 2 (above) to adjust the resolution of your computer. Press the toggle output settings. Example: [Fn]+[F4], Compaq Dell Gateway IBM HP NEC Tosh iba If you experience difficulty changing resolutions or your monitor freezes, restart all equipment including the projector. If you are using a Microsofte Windows@ based notebook: Some notebook PCs may deactivate their own screens when a second display device is in use. Each has a different way to be reactivated. Refer to your computer’s manual for detailed information If you are using an Apple Mac@ OS based notebook: In System Preferences, open Display and select Video Mirroring “On” Adjust the “Tracking” to correct it. Refer to the ” Image” section for more information. Change the display color depth settings on your computer. Use “Frequency” to make an adjustment. Refer to the ” Image” section for more information. Check and reconfigure the disp lay mode of your graphics card to make it compatible with the projector. Adjust the focus ring on the projector lens. Make sure the projection screen is within the required distance of 1.4-5.7 feet (0.4-1.7 meters) from the projector. Refer to the ” How to Get a Preferred Image Size by Adjusting Distance and Zoom ” section for more information. When you play a DVD encoded in anamorphic or 16:9 aspect ratio you may need to adjust the following settings: If you play a 4:3 format DVD title, please change the format to 4:3 in the projector OSD. If the image is still stretched, you will also need to adjust the aspect ratio. Set up the display format to 16:9 (wide) aspect ratio on your DVD player. If you play an Letterbox(LBX) format DVD title, please change the format to Letterbox(LBX) in the projector OSD.
****** Page 37 ****** 9 10 11 Image is too small or too large Image has slanted sides Image is reversed 27 Adjust the zoom ring on the top of the projector. Move the projector closer to or further from the screen. Press “MENU” on the remote control or on the control panel. Go to “Image –> Aspect Ratio” and try different settings. If possible, reposition the projector so that it is centered on the screen. Press the Keystone” on the OSD until the sides are vertical. Select “Image –> Projection Mode” on the OSD and adjust the projection direction. Problems with the Projector Condition The projector stops responding to all controls Solution If possible, turn off the projector, then unplug the power cord and wait at least 30 seconds before reconnecting power. Insert a paper clip (Illustration #1) into the “Reset” hole on the bottom of the projector to restart the system. o 1 Paperclip
****** Page 38 ****** 28 OSD Messages 2 Condition Message Message Message Reminder Fan Fail – the system fan is not working. Fan Fail. Will automatically turn off soon Projector Overheated – the projector has exceeded its recommended operating temperature and must be allowed to cool down before it may be used. Projector Overheated. Will automatical y turn off soon Battery capacity is 20% The battery capacity will lower than 20% soon, Battery capacity IS 10% The battery capacity will be lower than 10% soon Battery capacity IS 5% The battery capacity will lower than 5% soon. Battery capacity is 1% This projector runs out of battery and turns it off now, Please charge power by plugging in power adapter.
****** Page 39 ****** 29 Battery Capacity Icon Message in OSD Condition Message Message Reminder (1) Charging (with power adapter): Show lightening logo and battery capacity (%) ABC (2) Battery powered (w/o power adapter): X % (YY:ZZ, YY=Hour;ZZ=Minutes) (Show battery capacity and remaining using time) ABC
****** Page 40 ****** 30 LED & Alarm Definition Listing LED Indicator / Messages Standby Power On LED Adapter Power (Battery: Off) Adapter Power (Battery: On) Battery Power (Battery: Off) Battery Power (Battery: On) Adapter power Battery power Adapter power Overheated Battery power Adapter power FAN Fail Battery power Adapter power LED Fail Battery power POWER LED Red Red (F lash ing) Red (Flash ing 1 min.) Blue Blue Blue Blue LAMP Red Red Red (Flash ing) BATTERY Orange (In Charge) Green (End of Charge) Green Orange (300/0000/0) Red Orange In C arge Green (End of Charge) Green Orange (300/0000/0) Red Orange In C arge Green (End of Charge) Green Orange (300/0000/0) Red Orange In C arge Green (End of Charge) Green Orange (300/0000/0) Red Orange In C arge Green (End of Charge) Green Orange (300/0000/0) Red Note: When power on, click any key, Menu/Up/Down/Left/Right key LED will all be trigger.
****** Page 41 ****** 31 Specifications The specifications listed below are subject to change without notice. For final specs, please refer to Acer’s published marketing specifications. Projection system Resolution Computer compatibility Aspect ratio D isplayable colors Projection lens Projection screen size (diagonal) Projection distance Throw ratio Horizontal scan rate Vertical refresh scan rate Keystone correction Audio Bluetooth Headset Audio Weight Dimensions (W x D x H) Power supply Battery capacity USB output rating DLP@ WXGA (1280 x 800) IBM PC and compatibles, Apple Macintosh, iMac and VESA standards: SXGA+, SXGA, XGA, SVGA, VGA, WXGA, 1080p Full, 4:3, 16:9, L Box 16.7 million colors F — 1.9, f = 8.02 mm , manual focus 25″ (63cm) 100″ (254cm) 1.4′ (0.4m) 5.71 (1.7m) (0.80 0.80:1) 30k – 100 kHz 50- 120 Hz +/- 20 degrees Internal speaker with 3W x 2 output BT3.0 + EDR audio transm itter. Completely backward-compatible with BTI.I, 1.2, 2.0, 2.1 systems Ikg (2.2 lbs) 240 mm x 147 mm x 59 mm (9.45″ x 5.79″ x 2.32″) AC to DC 19V 4.74A Adapter, 50-60 Hz 1 1,412mAh (4S IP), 43W Max. 3 Hrs @ movie mode with HDMI cable; Max. 1.5 Hrs @ standard mode with HDMI cable. 5V/1A Power consumption (AC Adapter) • Operating temperature Normal mode: 80 W 10 @ Ilov AC (Bright mode @ full power) ECO mode: 38W +1-10 @ Ilov AC (Movie mode @ eco power) Standby < 0.5 W 5 oc to 40 OC/41 OF to 104 OF ****** Page 42 ****** 32 1/0 connectors Standard package contents • • • • DC input xl USB x 1 Audio In xl HDMI (MI-IL) xl VGA IN xl Audio Out xl Micro SD xl RJ45 Lan Input xl Wireless Projection Kit xl DC 5V Output xl Power cord xl AC to DC power adapter VGA cable xl Remote control xl Battery xl (for remote control) (option) User's Guide (CD-ROM) xl User's guide (CD-ROM) xl (for multi-media and wireless functions) Quick start guide xl Quick start guide xl (for multi-media and wireless functions) Carrying case xl USB WiFi adapter xl HDMI cable xl (option) * Design and specifications are subject to change without notice. ****** Page 43 ****** 33 Display Mode and Battery Capacity Referenced Operating Scenarios Display a movie by DVD player via HDMI port Local play USB flash thumb content Connect ChromeCast (display videos via Youtube) Source "LANNViFi" and do wireless projection via mobile Movie Mode (Display Hours) 3.0hrs 2.5hrs 2.5hrs 2.5hrs Standard Mode (Display Hours) 1.5hrs 1.2hrs 1.2hrs 1.2hrs Note 1: The above table is based on battery mode (without plugging power adapter). Note 2: The above table is at maximum volume and USB WiFi is active. Battery status is from full to end. Note 3: The battery capacity will be decreased by longer time and more recycling times. The above table is for reference only. Note 4: Keep the power more than 30% always for better cell life. Note 5: Full recharge the power bank at least every 3 months. Note 6: For 1ST time usage, please plug in DC power to recharge battery 8hrs. ****** Page 44 ****** 34 Compatibility modes A. VGA Analog 1 VGA Analog PC Signal Modes VGA SVGA XGA SXGA QuadVGA SXGA+ PowerBook PowerBook PowerBook PowerBook PowerBook PowerBook i Mac DV (G3) Resolution 640×480 640×480 800×600 800×600 800×600 800×600 1024×768 1024×768 1024×768 1024×768 1152×864 1280×1024 1280×1024 1280×960 1280×960 1400×1050 640×480 640×480 800×600 1024×768 1152×870 1280×960 1024×768 V.Frequency [HzJ 60 75 56 60 75 120 60 70 75 120 75 60 75 60 75 60 60 66.6 (67) 60 60 75 75 75 H.Frequency [KHz] 31.5 37.5 35.1 37.9 46.9 77.4 48.4 56.5 60.0 99.0 67.5 64.0 80.0 60.0 75.2 65.3 31.4 34.9 37.9 48.4 68.7 75.0 60.0 ****** Page 45 ****** 2 3 1 VGA Analog – Extended Wide timing Modes WXGA WSXGA+ VGA Analog Modes 480i 576i 480p 576p 720p 720p 1080i 1080i 1080p 1080p 1080p Resolution 1280×768 1280×768 1280×720 1280×800 1280×800 1440×900 1680×1050 x (Reduced V.Frequency [Hzl Blanking Timing 1366×768 Component Signal 60 75 60 60 120 60 60 60 60 B. HDMI Digital HDMI PC Signal Modes VGA SVGA XGA Resolution 720×480 720×576 720×480 720×576 1280×720 1280×720 1920×1080 1920×1080 1920×1080 1920×1080 1920×1080 Resolution 640×480 640×480 800×600 800×600 800×600 800×600 1024×768 1024×768 1024×768 V.Frequency (Hz] 59.94(29.97) 50(25) 59.94 50 60 50 60 (30) 50 (25) 23.97/24 60 50 V.Frequency [Hz] 60 75 56 60 75 120 60 70 75 35 H.Frequency [KHz] 47.8 60.3 44.8 49.6 101.5 59.9 65.3 66.6 47.7 H.Frequency [KHz] 15.7 15.6 31.5 31.3 45.0 37.5 33.8 28.1 27.0 67.5 56.3 H.Frequency [KHz] 31.5 37.5 35.1 37.9 46.9 77.4 48.4 56.5 60.0 ****** Page 46 ****** 36 2 SXGA QuadVGA SXGA+ PowerBook G4 PowerBook G4 PowerBook G4 PowerBook G4 PowerBook G4 i Mac DV (G) 1024×768 1152×864 1 152×864 1280×1024 1280×1024 1280×960 1400×1050 640×480 640×480 800×600 1024×768 1152×870 1024×768 HDMI – Extended Wide timing Modes WXGA WSXGA+ Resolution 1280×768 1280×768 1280×800 1280×800 1680×1050 1920×1080 (Reduced Blanking Timin ) 1366×768 120 70 75 60 75 60 60 60 66.6 (67) 60 60 75 75 V.Frequency [Hz] 60 75 60 60 120 60 60 60 60 99.0 63.8 67.5 64.0 80.0 60.0 65.3 31.4 34.9 37.9 48.4 68.7 60.0 H.Frequency [KHz] 47.8 60.3 44.8 49.6 101.5 59.9 65.3 66.6 47.7 ****** Page 47 ****** 3 HDMI Modes 480i 576i 480p 576p nop nop 1080i 1080i 1080p 1080p 1080p Video Signal Resolution 720×480(1440×480) 720×576(1440×576) 720×480 720×576 1920×1080 1920×1080 1920×1080 1920×1080 1920×1080 Horizontal scan rate: Vertical scan rate: Max. pixel rate V.Frequency [Hz] 59.94 (29.97) 50 (25) 59.94 50 60 50 60 (30) 50 (25) 23.97/24 60 50 301<-102kHz 50-120Hz 150MHz 37 H.Frequency [KHz] 15.7 15.6 31.5 31.3 45.0 37.5 33.8 28.1 27.0 67.5 56.3 Grap source monitor range limits ****** Page 48 ****** 38 Regulations and safety notices FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the device and receiver. Connect the device into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/television technician for help. Notice: Shielded cables All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations. Notice: Peripheral devices Only peripherals (input/output devices, terminals, printers, etc.) certified to comply with the Class B limits may be attached to this equipment. Operation with non-certified peripherals is likely to result in interference to radio and TV reception. Caution Changes or modifications not expressly approved by the manufacturer could void the user's authority, which is granted by the Federal Communications Commission, to operate this device. Operation conditions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Notice: Canadian users This Class B digital apparatus complies with Canadian ICES-003. ****** Page 49 ****** 39 Remarque Ilintention des utilisateurs canadiens Cet appareil numérique de la classe B est conforme a la norme NMB-003 du Canada. Declaration of Conformity for EU countries Acer hereby declares that this projector series is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Compliant with Russian regulatory certification 001 Radio device regulatory notice Note: The regulatory information below is for models with wireless LAN and/or Bluetooth only. General This product complies with the radio frequency and safety standards of any country or region in which it has been approved for wireless use. Depending on configurations, this product may or may not contain wireless radio devices (such as wireless LAN and/or Bluetooth modules). Canada — Low-power license-exempt radio communication devices (RSS-210) a b Common information Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device. Operation in 2.4 GHz band To prevent radio interference to the licensed service, this device is intended to be operated indoors and installation outdoors is subject to licensing List of applicable countries This device must be used in strict accordance with the regulations and constraints in the country of use. For further information, please contact the local office in the country of use. Please see ec.europa.eu/enterprise/rtte/implem.htm for the latest country list. ****** Page 50 ****** acer Acer Incorporated 88, Sec. 1, Xintai 5th Rd., Xizhi New Taipei 221, Taiwan Declaration of Conformity we, Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd., Xizhi, New Taipei City 221, Taiwan Contact Person: Mr. RU Jan, e-mail: email@example.com And, Acer Italy s.r.l Via Lepetit, 40, 20020 Lainate (MI) Italy Tel: +39-02-939-921 ,Fax: +39-02 9399-2913 accr.it Declare under our own responsibility that the product: Product: Trade Name: Model Number: DLP Projector Acer CWX1510 KI 38STi/L224WLK-W16F To which this declaration refers conforms to the relevant standard or other standardizing documents: EN55022:2010 Class B; EN 55024:2010 ENG 1000-3-2:2006+A 1 Class A EN61000-3-3:2008 EN 60950-1 :2006/A11 Regulation (EC) No. 1275/ 2008; EN 62301 :2005 Regulation (EO No. 278/2009; EN 50563 :2011 EN50581:2012 We hereby declare above product is in compliance with the essential requirements and other relevant provisions of EMC Directive 2004/108/EC, Low Voltage Directive 2006/95/EC and RoHS Directive 2011/65/EU and Directive 2009/125/EC with regard to establishing a framework for the setting ofecodesign requirements for energy-related product. Year to begin affixing CE marking 2015. an r. anagcr Regulation, Acer Inc. Sep. 1, 2015 ate ****** Page 51 ****** acer Acer America Corporation 333 West San Carlos St., Suite 1500 San Jose, CA 95110 Tel: 254-298-4000 Fax: 254-2984147 Federal Communications Commission Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undcsircd operation. Thc following local Manufacturer / Importer is responsible for this declaration: Produce Model Number: Machine Type: Name of Responsible Party: Address of Responsible Party: Contact Person: Phone No.: Fax No.: DLP Projector CWX1510 K138STi/L224WLK-W16F Acer America Corporation 333 West San Carlos St. Suite 1500 San Jose, CA 95110 Acer Representative 254-298-4000 254-298-4147
FREE ENGLISH PDF
USER GUIDE – USER MANUAL
OWNER GUIDE – OWNER MANUAL
REFERENCE GUIDE – REFERENCE MANUAL
INSTRUCTION GUIDE – INSTRUCTION MANUAL